[Journal Article]
Datengetriebene Werkzeugeingriffsdetektion für Fräsprozesse
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 117 (11), 784-789, 2022
[DOI: 10.1515/zwf-2022-1146]

Brecher, Christian
Ochel, Janis (Corresponding author)
Fey, Marcel

[Contribution to a conference proceedings]
Laser micro structuring of multi-layer coatings on aircraft splines for optimization of the surface properties
In: [12th Laser Applications Forum, LAF 2022, 2022-11-23 - 2022-11-24, Bremen, Germany], 28-31, 2022
[DOI: 10.26092/ELIB/1886]

Stephen, Andreas
Lenz, Bastian
Hellenbrand, Gerrit (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
Evaluating the Capability of Acoustic Characteristic Values for Accessing the Gearbox Quality
In: AAC 2022 : Aachen Acoustics Colloquium, 21.-23.11.2022 : proceedings : November 21-23, 2022, Parkhotel Quellenhof Aachen / FEV, fka, HEAD acoustics, IHTA/ RWTH Aachen University ; scientific management: Prof. Dr.-Ing. S. Pischinger, Prof. Dr.-Ing. L. Eckstein, Prof. Dr.-Ing. K. Genuit, Prof. Dr. rer. nat. M. Vorländer ; organizing committee: Christoph Steffens, Thomas Böttcher, Matthias Wegerhoff, Gottfried Behler, 125-134, 2022

Willecke, Marius (Corresponding author)
Brimmers, Jens
Brecher, Christian

[Contribution to a book, Journal Article]
Künstliche Intelligenz zur individuellen und personalisierten Weiterbildungssuche in der kunststoffverarbeitenden Industrie
In: Berufs- und Wirtschaftspädagogik Online : bwp@, 43, 1-29, 2022

Korth, Susanne (Corresponding author)
Dersch, Heinz (Corresponding author)
Jungnickel, Robert (Corresponding author)
Lütticke, Daniel (Corresponding author)
Müller, Jonas Maximilian (Corresponding author)
et al.

[Proceedings]
NFDI4Ing Conference 2022 - Conference Contributions, 2022
[DOI: 10.5281/ZENODO.7362038]

Hamann, Tobias (Editor)
Moser, Mario Niclas (Editor)
Zeng, Michael (Editor)

[Book, Dissertation / PhD Thesis]
Gestaltungsmodell zur lernunterstützenden Erweiterung von Produktionsplanungs- und -steuerungssystemen
In: Schriftenreihe Rationalisierung 185, 2022
[DOI: 10.18154/RWTH-2022-11507]

Bach, Jan-Thies

[Contribution to a book, Contribution to a conference proceedings]
Online monitoring of flushing quality in PECM based on electric process signals
In: Proceedings of the 18th International Symposium on Electrochemical Machining Technology, 39-44, 2022

Tchoupe Sambou, Hermann Elio (Corresponding author)
Heidemanns, Lukas Franz
Küpper, Ugur
Herrig, Tim
Klink, Andreas
et al.

[Contribution to a conference proceedings, Journal Article]
Towards shape optimization of flow channels in profile extrusion dies using reinforcement learning
In: Proceedings in applied mathematics and mechanics : PAMM, 22 (1), e202200009, 2022
[DOI: 10.1002/pamm.202200009]

Wolff, Daniel (Corresponding author)
Fricke, Clemens (Corresponding author)
Kemmerling, Marco (Corresponding author)
Elgeti, Stefanie Nicole (Corresponding author)

[Contribution to a conference proceedings]
Empirical Analysis of Mechanical and Thermal Effects on Elastic Workpiece Deformations during Broaching of Safety-Critical Components
In: Proceedings of the Machining Innovations Conference for Aerospace Industry (MIC) 2022, 2022
[DOI: 10.2139/ssrn.4251383]

Seelbach, Tobias
Schraknepper, Daniel
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Discharge energy based optimisation of sinking EDM of cemented carbides
In: Procedia CIRP, 108, 734-739, 2022

Petersen, Timm
Küpper, Ugur
Klink, Andreas
Herrig, Tim
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Size and speed of ejected particles from different cemented carbide grades machined with sinking EDM
In: Procedia CIRP, 113, 214-219, 2022

Petersen, Timm
Küpper, Ugur
Herrig, Tim
Klink, Andreas
Bergs, Thomas

[Book, Dissertation / PhD Thesis]
Typisierung und Auswahl von Referenzstrategien für den Werkzeugeinkauf
In: Ergebnisse aus der Produktionstechnik 38/2022, 2022
[DOI: 10.18154/RWTH-2022-11468]

Helbig, Jens Philipp

[Contribution to a conference proceedings, Journal Article]
Towards in-process evaluation of the precise electrochemical machining (PECM)
In: Procedia CIRP, 113, 392-397, 2022

Tchoupe Sambou, Hermann Elio
Heidemanns, Lukas Franz
Küpper, Ugur
Herrig, Tim
Klink, Andreas
et al.

[Contribution to a conference proceedings, Journal Article]
Experimental setup for the investigation of the transport of different gas bubble sizes during electrochemical machining based on similarity theory using particle image velocimetry
In: Procedia CIRP, 113, 417-421, 2022

Tchoupe Sambou, Hermann Elio
Heidemanns, Lukas Franz
Klink, Andreas
Herrig, Tim
Klaas, Michael
et al.

[Contribution to a conference proceedings, Journal Article]
Experimental setup for the investigation of the transport of different gas bubble sizes during electrochemical machining based on similarity theory using particle image velocimetry
In: Procedia CIRP, 113, 417-421, 2022
[DOI: 10.1016/j.procir.2022.09.193]

Tchoupe Sambou, Hermann Elio (Corresponding author)
Heidemanns, Lukas Franz
Klink, Andreas
Herrig, Tim
Klaas, Michael
et al.

[Contribution to a conference proceedings, Journal Article]
Towards in-process evaluation of the precise electrochemical machining (PECM)
In: Procedia CIRP, 113, 392-397, 2022
[DOI: 10.1016/j.procir.2022.09.189]

Tchoupe Sambou, Hermann Elio (Corresponding author)
Heidemanns, Lukas Franz
Küpper, Ugur
Herrig, Tim
Klink, Andreas
et al.

[Book, Proceedings]
Aachen Conference on Gear Production : Gear finishing technology and quality inspection : 9th - 10th November 2022, 2022

Bergs, Thomas (Editor)
Brecher, Christian (Editor)

[Contribution to a conference proceedings, Journal Article]
Size and speed of ejected particles from different cemented carbide grades machined with sinking EDM
In: Procedia CIRP, 113, 214-219, 2022
[DOI: 10.1016/j.procir.2022.09.148]

Petersen, Timm (Corresponding author)
Küpper, Ugur
Herrig, Tim
Klink, Andreas
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Discharge energy based optimisation of sinking EDM of cemented carbides
In: Procedia CIRP, 108, 734-739, 2022
[DOI: 10.1016/j.procir.2022.03.113]

Petersen, Timm (Corresponding author)
Küpper, Ugur
Klink, Andreas
Herrig, Tim
Bergs, Thomas

[Book, Dissertation / PhD Thesis]
Tribologische und geometrische Auslegung von additiv hergestellten Werkzeugeinsätzen zur Feinblechumformung
In: Ergebnisse aus der Produktionstechnik 42/2022, 2022
[DOI: 10.18154/RWTH-2022-11301]

Bickendorf, Philipp

[Contribution to a conference proceedings]
Semantic Reasoning for Automated Factory Planning
In: [1st MoPro Workshop - Modellierung 2022 Satellite Events, 2022-06-27 - 2022-07-01, Hamburg, Germany], 123-126, 2022
[DOI: 10.18420/MODELLIERUNG2022WS-013]

Schäfer, Niklas Cedric (Corresponding author)

[Contribution to a conference proceedings]
Application of a Digital Twin for Proactive Production Planning
In: SNAME Maritime Convention Day 2 Wed, September 28, 2022, 10 Seiten, 2022
[DOI: 10.5957/SMC-2022-058]

Burggräf, Peter
Adlon, Tobias
Schäfer, Niklas Cedric (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
Investigation of the Correlation between Surface Integrity and Load Capacity in an Analogy Trial for Gear Flank Contact
In: Aachen Forum on gear production: gear finishing technology and quality inspection : 9th - 10th November 2022 / Thomas Bergs, Christian Brecher (Eds.), 71-77, 2022

Schalley, Babette (Corresponding author)
Bergs, Thomas
Brimmers, Jens
Solf, Mareike

[Contribution to a book, Contribution to a conference proceedings]
Modeling of the Elastic Honing Ring Behavior in Two-Flank Polish Honing
In: Aachen Forum on gear production: gear finishing technology and quality inspection : 9th - 10th November 2022 / Thomas Bergs, Christian Brecher (Eds.), 25-33, 2022

Schrank, Maximilian Günter (Corresponding author)
Bergs, Thomas
Brimmers, Jens
Solf, Mareike

[Contribution to a book, Contribution to a conference proceedings]
Heat treatment development for the new steel grade X20NiCrAlMoV6-5-2-1 for high performance gear wheel application : Tailored heat treatment for high temperature application of gear wheels
In: International Conference on Gears 2022, 4th International Conference on High Performance Plastic Gears 2022, 4th International Conference on Gear Production 2022 : Garching / Munich, Germany September 12 - 14, 2022 / VDI-Society for Product and Process Design, 891-902, 2022
[DOI: 10.51202/9783181023891-891]

Steinbacher, Matthias
Boyraz, Tarik
Fechte-Heinen, Raner
Hellenbrand, Gerrit

[Contribution to a book, Contribution to a conference proceedings]
Test Rig for Crowned Spline-Joints with Optimized Surface Treatments Under Misaligned Conditions
In: AGMA Fall Technical Meeting Papers 2022, October 17-19, 2022, Rosemont, IL/ USA, 11 P., 2022

Hellenbrand, Gerrit (Corresponding author)
Mevissen, Dieter J. W.
Brimmers, Jens
Brecher, Christian

[Journal Article]
Anwendungsmöglichkeiten der 5G-Technologie für die Zerspanung
In: UNTER SPAN : Das Magazin des Manufacturing Innovations Network e. V, 2022, 34-34, 2022

Pullen, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Semantic modeling of a cyber-physical biological production platform
In: 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) : 6-9 Sept. 2022 / [IEEE Industrial Electronics Society, IEEE], 8 Seiten, 2022
[DOI: 10.1109/ETFA52439.2022.9921616]

Pieske, Simon (Corresponding author)
Herfs, Werner
Zenke, Martin (Corresponding author)
Storms, Simon
Brecher, Christian

[Journal Article]
Validation of the Calculation of Dynamic Tooth Root Stresses
In: Power transmission engineering, 16 (7), 46-54, 2022

Zalfen, Moritz Johannes (Corresponding author)

[Contribution to a conference proceedings]
Fields of Action in Mega-Casting for the Industrializiation of Automotive Car Bodies
In: [Car Body Parts - from development to production, 2022-09-27 - 2022-09-29, Bad Nauheim, German], 29 S., 2022
[DOI: 10.13140/RG.2.2.13349.17125]

Fiedler, Falko (Corresponding author)
Bergweiler, Georg
Burggräf, Peter
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
Practical analysis of productivity of grinding tools in the process of internal generating gear grinding
In: International Conference on Gears 2022, 4th International Conference on High Performance Plastic Gears 2022, 4th International Conference on Gear Production 2022 : Garching / Munich, Germany September 12 - 14, 2022 / VDI-Society for Product and Process Design, 1319-1330, 2022
[DOI: 10.51202/9783181023891-1319]

Spatzig, Alexander
Fujimura, Noritaka
de Oliveira Teixeira, Patricia (Corresponding author)

[Journal Article]
Die Karosserie aus dem Aluminium-Druckguss - Chancen und Risiken von Mega-Casting in der Fahrzeugproduktion /Opportunities and Risks of Mega-Casting in Automotive Production - The Aluminum Die-Casted Body in White
In: wt Werkstattstechnik online, 112 (09), 580-585, 2022
[DOI: 10.37544/1436-4980-2022-09-52]

Fiedler, Falko (Corresponding author)
Schuh, Günther
Bergweiler, Georg
Dworog, Leonhard

[Journal Article]
Progettazione di un banco prova back-to-back per test ad altissimo numero di cicli
In: Organi di trasmissione, 2022 (Ottobre), 36-46, 2022

Lövenich, Johannes Peter (Corresponding author)
Zalfen, Moritz Johannes
Malinowski, Oscar
Brimmers, Jens
Brecher, Christian
et al.

[Journal Article]
Design and Simulation of a Back-to-Back Test Rig for Ultra High Cycle Fatigue Testing of Gears Under Fully Reversed Load
In: Gear technology, 39 (June 2022), 58-70, 2022
[DOI: 10.18154/RWTH-2022-11237]

Lövenich, Johannes Peter (Corresponding author)
Zalfen, Moritz Johannes
Malinowski, Oscar
Brimmers, Jens
Neus, Stephan
et al.

[Journal Article]
Development of a process signature for electrical discharge machining
In: CIRP annals, manufacturing technology, 71 (1), 177-180, 2022
[DOI: 10.1016/j.cirp.2022.03.043]

Klink, Andreas (Corresponding author)
Schneider, Sebastian
Bergs, Thomas

[Journal Article]
3D-CUBE readiness model for industry 4.0 : technological, organizational, and process maturity enablers
In: Production & manufacturing research, 10 (1), 875-937, 2022
[DOI: 10.1080/21693277.2022.2135628]

Felippes, Bruna
da Silva, Isaac
Barbalho, Sanderson (Corresponding author)
Adam, Tobias
Heine, Ina
et al.

[Talk (non-conference)]
Workflows ingenieurwissenschaftlicher Forschungsabläufe - Auszug des aktuellen Forschungsstands
In: NFDI4Ing Consortium, 2022
[DOI: 10.5281/ZENODO.7125571]

Hamann, Tobias
Moser, Mario Niclas

[Contribution to a conference proceedings, Journal Article]
Simulation based derivation of changed rim zone properties caused by thermal loadings during EDM process
In: Procedia CIRP, 113, 41-46, 2022

Heß, Dennis Raphael
Grethe, Peter
Heidemanns, Lukas Franz
Herrig, Tim
Klink, Andreas
et al.

[Report]
Working Group Charter Training Infrastructures, 2022
[DOI: 10.5281/ZENODO.6478698]

Pelz, Peter
Herres-Pawlis, Sonja
Liermann, Johannes
Strauß, Florian
Ohse, David
et al.

[Journal Article]
Enhancement of an Experimental Methodology for the Investigation of Contact Heat Transfer at High Pressures
In: Journal of fluid flow, heat and mass transfer : JFFHMT, 9, 157-164, 2022
[DOI: 10.11159/jffhmt.2022.019]

Göttlich, Tim (Corresponding author)
Helmig, Thorsten
Gerhard, Nicklas
Bergs, Thomas
Kneer, Reinhold

[Journal Article]
Numerical Investigation of Convective Heat Transfer during Orthogonal Cutting Processes
In: Journal of fluid flow, heat and mass transfer : JFFHMT, 9, 177-183, 2022
[DOI: 10.11159/jffhmt.2022.021]

Helmig, Thorsten (Corresponding author)
Göttlich, Tim
Liu, Hui (Corresponding author)
Bergs, Thomas
Kneer, Reinhold

[Book, Dissertation / PhD Thesis]
Kontextabhängig Anomaliedetektion zur visuellen Hinderniserkennung für automatisierte PKW im End-of-Line-Bereich
In: Ergebnisse aus der Produktionstechnik 37/2022, 2022
[DOI: 10.18154/RWTH-2022-11143]

Wenning, Marius Julian

[Journal Article]
Mit PVD-beschichteten PKD-Zerspanwerkzeugen Guss wirtschaftlich bearbeiten
In: Branchenreport : Nachrichten für die Werkzeugmaschinenindustrie, 2022 (11), 20-21, 2022

Jacob, Jannis
Frank, Heiko

[Journal Article]
Kollaborative Montageprozesse mit Behavior Trees
In: wt Werkstattstechnik online, 112 (9), 565-568, 2022
[DOI: 10.37544/1436-4980-2022-09-37]

Trinh, Minh
Behery, Mohamed
Petrovic, Oliver
Brecher, Christian
Lakemeyer, Gerhard

[Contribution to a book, Contribution to a conference proceedings]
Development of a Framework for Continual Learning in Industrial Robotics
In: 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) : 6-9 Sept. 2022 / [IEEE Industrial Electronics Society, IEEE], 8 Seiten, 2022
[DOI: 10.1109/ETFA52439.2022.9921432]

Trinh, Minh (Corresponding author)
Moon, Jiyoung (Corresponding author)
Gründel, Lukas (Corresponding author)
Hankemeier, Victoria (Corresponding author)
Storms, Simon (Corresponding author)
et al.

[Contribution to a conference proceedings, Journal Article]
Numerical Investigation of the EDM Induced Temperature Field in a Composite Ceramic
In: Procedia CIRP, 108, 31-36, 2022

Heß, Dennis Raphael
Olivier, Marcel Christoph
Schneider, Sebastian
Heidemanns, Lukas Franz
Klink, Andreas
et al.

[Poster]
Nutzbarmachung von 5G auf Baustellen und in untertägigen Bergwerken
In: Festkolloquium "5G-Industry Campus Europe - 3 Jahre Innovationen für die Industrie 4.0" 2022 Aachen 2022-11-29 - 2022-11-29, 2022
[DOI: 10.24406/PUBLICA-513]

Schmitt, Sarah
Brochhaus, Maximilian
Jung, Victoria Clarita
Krishnan, Ajith
Lee, Hyung Joo
et al.

[Conference Presentation]
Cost-effective production of glass fibre reinforced towpregs
In: SAMPE Europe Conference 2021 Baden/Zürich 2021-09-29 - 2021-09-30, 2022

von Helden, Jonathan
Baumann, Heiko
Janssen, Henning
Brecher, Christian

[Journal Article]
Reifegrad mit Digitalwerkzeug erhöhen. Qualitätsmanagement bei KMU
In: IT & production, 23 (8), 80-81, 2022

Brochhaus, Maximilian
Schmitt, Robert H.
Fleischer, Karsten
Koch, Julian

[Journal Article]
Predictive Quality in der Produktion
In: Qualität und Zuverlässigkeit, 10, 26-29, 2022

Buschmann, Daniel
Huebser, Louis
Schulze, Tobias