[Contribution to a conference proceedings, Journal Article]
Experimental analysis on the accuracy of two dimensional curved cuts in wire ECM
In: Procedia CIRP, 113, 398-403, 2022
[DOI: 10.1016/j.procir.2022.09.190]

Sous, Florian
Heidemanns, Lukas Franz
Herrig, Tim
Klink, Andreas
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Concept for Databased Identification of Heuristics for Development Management using FAMD
In: IEEM2022 : IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : Kuala Lumpur, Malaysia, 07-10 December 2022 / organizers: IEEE TEMS - Technology & Engineering Management Society, IEEE TEMS Hong Kong Chapter, IEEE TEMS Malaysia Chapter, IEEE TEMS Singapore Chapter ; publisher: IEEE, 1281-1285, 2022
[DOI: 10.1109/IEEM55944.2022.9989972]

Riesener, Michael
Kuhn, Maximilian
Lender, Benjamin Nils Johannes (Corresponding author)
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
Methodology for Automated Master Data Management using Artificial Intelligence
In: IEEM2022 : IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : Kuala Lumpur, Malaysia, 07-10 December 2022 / organizers: IEEE TEMS - Technology & Engineering Management Society, IEEE TEMS Hong Kong Chapter, IEEE TEMS Malaysia Chapter, IEEE TEMS Singapore Chapter ; publisher: IEEE, 1276 -1280, 2022
[DOI: 10.1109/IEEM55944.2022.9989629]

Riesener, Michael
Kuhn, Maximilian
Lender, Benjamin Nils Johannes (Corresponding author)
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
Concept for the Design of an Implementation Process for Continuous Innovation in Manufacturing Companies
In: IEEM2022 : IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : Kuala Lumpur, Malaysia, 07-10 December 2022 / organizers: IEEE TEMS - Technology & Engineering Management Society, IEEE TEMS Hong Kong Chapter, IEEE TEMS Malaysia Chapter, IEEE TEMS Singapore Chapter ; publisher: IEEE, 1291-1295, 2022
[DOI: 10.1109/IEEM55944.2022.9989699]

Riesener, Michael
Kuhn, Maximilian (Corresponding author)
Perau, Stefan
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
Feinschneidbarkeit von pressgehärtetem Mangan-Bor-Stahl - eine Zukunftsperspektive?
In: 17, 41-50, 2022

Weiser, Ingo Felix
Herrig, Tim
Bergs, Thomas

[Dissertation / PhD Thesis]
Messtechnikgestützte Reduzierung systematischer Geometrieabweichungen von Kunststoffspritzgusswerkstücken, 2022
[DOI: 10.18154/RWTH-2023-03378]

Ballach, Katharina

[Contribution to a conference proceedings]
Modular Software Architecture for interfacing Online Scheduling Agents with Assembly Planning and Control Systems
In: [Conference on Production Systems and Logistics: CPSL 2022.], 206-216, 2022
[DOI: 10.15488/12134]

Göppert, Amon Mirko Robin
Rachner, Jonas Sebastian
Kaven, Lea
Schmitt, Robert H.

[Journal Article]
Digital Twin Pipeline zur VDA-5050-Integration
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 117 (5), 327-331, 2022
[DOI: 10.1515/zwf-2022-1057]

Kaven, Lea (Corresponding author)
Abele, Ella
Göppert, Amon Mirko Robin
Schmitt, Robert H.

[Journal Article]
Real-Time Quality Control in Thin Glass Forming Using Infrared Thermography and Deep Learning
In: Key engineering materials, 926, 2312-2321, 2022
[DOI: 10.4028/p-5w9vr9]

Vu, Anh Tuan
Vogel, Paul Alexander
Siva Subramanian, Abimathi
Grunwald, Tim
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Knowledge-Based Process Design Optimisation in Blisk Manufacturing
In: Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022) : June 13-17, 2022, Rotterdam, The Netherlands . - Volume 7: Industrial and cogeneration; manufacturing materials and metallurgy; microturbines, turbochargers, and small turbomachines; oil & gas applications, 2022
[DOI: 10.1115/GT2022-83214]

Landwehr, Markus
Ganser, Philipp
Vinogradov, Georg
Bergs, Thomas

[Journal Article]
Effect of a Single Particle in Abrasive Waterjet Machining on 42CrMo4 Modifications
In: Procedia CIRP, 113, 519-524, 2022
[DOI: 10.1016/j.procir.2022.09.170]

Dadgar, M.
Schüler, M.
Herrig, Tim
Bergs, Thomas

[Journal Article]
Influence of relative velocity and contact force between abrasive media and workpiece on material removal in gyro finishing
In: Journal of manufacturing processes, 79, 614-625, 2022
[DOI: 10.1016/j.jmapro.2022.05.012]

Ohlert, Marius
Brüssel, Fabian
Prinz, Sebastian
Barth, Sebastian
Bergs, Thomas

[Journal Article]
Influence of dressing parameters on the formation of micro lead on shaft sealing counterfaces during external cylindrical plunge grinding
In: Advances in industrial and manufacturing engineering, 5, 100098, 2022
[DOI: 10.1016/j.aime.2022.100098]

Röttger, Jannik
Bergs, Thomas
Barth, Sebastian
Baumann, Matthias
Bauer, Frank

[Contribution to a conference proceedings, Journal Article]
A study on abrasive waterjet multi-stage machining of ceramics
In: Procedia CIRP, 108, 770-775, 2022
[DOI: 10.1016/j.procir.2022.03.119]

Schüler, M. (Corresponding author)
Herrig, Tim
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Surface integrity in high-feed roughing of Inconel 718 with SiAlON end mills
In: Procedia CIRP, 108, 595-600, 2022
[DOI: 10.1016/j.procir.2022.03.094]

Zimmermann, Richard (Corresponding author)
Michel-Angeli, Niklas
Welling, David
Ganser, Philipp
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Digitized, networked optics production
In: Procedia CIRP, 111, 827-831, 2022
[DOI: 10.1016/j.procir.2022.08.092]

Dorißen, Jonas
Rojacher, Cornelia (Corresponding author)
Grunwald, Tim
Schmitt, Robert H.
Bergs, Thomas

[Journal Article]
Inverse Determination of the Johnson-Cook Material Model Parameters of Aluminum Al 6060 from Orthogonal Cutting Examinations
In: Procedia CIRP, 112, 304-309, 2022
[DOI: 10.1016/j.procir.2022.09.002]

Hardt, Marvin Yannick
Bergs, Thomas

[Journal Article]
Force Modeling in Generating Gear Grinding Considering the Grinding Worm Topography
In: Procedia CIRP, 115, 66-71, 2022
[DOI: 10.1016/j.procir.2022.10.051]

Löhrer, Patricia de Oliveira
Solf, Mareike
Brimmers, Jens
Bergs, Thomas

[Contribution to a conference proceedings]
Experimental analysis on process performance process performance as function of as function of electrolyte properties and usage of sacrificial electrolyte properties and usage of sacrificial anodes anodes in wire ECMin wire ECM
In: 18th. INSECT Proceedings 2022, 131-136, 2022

Sous, Florian

[Contribution to a book, Contribution to a conference proceedings]
Experimental analysis on process performance as function of electrolyte properties and usage of sacrificial anodes in wire ECM
In: Proceedings of the 18th International Symposium on Electrochemical Machining Technology, 131-136, 2022

Sous, Florian
Klink, Andreas
Herrig, Tim
Bergs, Thomas

[Dissertation / PhD Thesis]
Nutzung der ereignisdiskreten Simulation für die operative Produktionsplanung in der mehrstufigen Einzel- und Kleinserienfertigung, 2022
[DOI: 10.18154/RWTH-2023-03051]

Stehr, Ernst-August

[Journal Article]
Virtualisierung in der Steuerungstechnik/Virtualization in control technology - Virtualization and consolidation of programmable logic controllers
In: wt Werkstattstechnik online, 112 (11/12), 792-796, 2022
[DOI: 10.37544/1436-4980-2022-11-12-66]

Susen, Christoph Johann (Corresponding author)
Storms, Simon
Herfs, Werner

[Journal Article]
Künstliche Intelligenz als Gestaltungselement für den Karosseriebau der Zukunft- Spezial Produktion im Automobilbau
In: Automobiltechnische Zeitschrift, 124 (1), 68-71, 2022
[DOI: 10.1007/s35148-021-0817-9]

Schuh, Günther
Fiedler, Falko
Boelsen, Yannick
Behnen, Lukas (Corresponding author)

[Contribution to a conference proceedings, Journal Article]
Complexity-oriented design for cyber-physical systems
In: Procedia CIRP, 2022 (109), 203-208, 2022
[DOI: 10.1016/j.procir.2022.05.237]

Riesener, Michael
Kuhn, Maximilian
Keuper, Alexander (Corresponding author)
Schuhmacher, Jan
Schuh, Günther

[Journal Article]
Elektromobilproduktion mittels grüner Multi-kW-Laserbearbeitung
In: Maschinenbau, 2 (4), 36-40, 2022
[DOI: 10.1007/s44029-022-0180-y]

Bergweiler, Georg
Höltgen, Christian (Corresponding author)
Kaufmann, Florian
Fiedler, Falko

[Contribution to a conference proceedings]
Benchmark of Abrasives for Different Applications
In: [WJTA Conference & Expo 2022, WJTA, 2022-11-01 - 2022-11-03, New Orleans, Louisiana, USA], 15 pp., 2022

Schüler, Manuel
Day, Robin
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Numerical Prediction of the Influence of Process Parameters and Process Set-Up on Damage Evolution during Deep Drawing of Rectangular Cups
In: Engineering proceedings, 26 (1), 6, 2022
[DOI: 10.3390/engproc2022026006]

Müller, Martina (Corresponding author)
Weiser, Ingo Felix
Herrig, Tim
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Analysis of Friction of Bowl-Shaped Surface Structures resulting from Alternative Gear Manufacturing Processes
In: International Conference on Gears 2022, 4th International Conference on High Performance Plastic Gears 2022, 4th International Conference on Gear Production 2022 : Garching / Munich, Germany September 12 - 14, 2022 / VDI-Society for Product and Process Design, 1371-1382, 2022

Mevissen, Dieter (Corresponding author)
Uhlmann, Lars Heinz
Küpper, Ugur
Brimmers, Jens
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Influences on the Excitation Behavior of Lightweight Planetary Gearboxes
In: International Conference on Gears 2022, 4th International Conference on High Performance Plastic Gears 2022, 4th International Conference on Gear Production 2022 : Garching / Munich, Germany September 12 - 14, 2022 / VDI-Society for Product and Process Design, 421-432, 2022
[DOI: 10.51202/9783181023891-421]

Theling, Julian Anselm
Willecke, Marius (Corresponding author)
Brimmers, Jens
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Influence Of Densification And Case Hardening On The NVH Behavior Of Sintered Gears
In: [WorldPM 2022 Congress & Exhibition : Proceedings. - Developing the powder metallurgy future. 9.-13. Oktober 2022, Lyon, France], 6 p., 2022

Scholzen, Philipp Alexander (Corresponding author)
Brimmers, Jens
Brecher, Christian

[Journal Article]
Sustainable Gears - Design of Gear Body Modified Powder Metal (PM) Gears
In: Gear technology, 39 (7), 46-57, 2022

Scholzen, Philipp Alexander (Corresponding author)
Brimmers, Jens
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Sustainable Gears - Design of Gear Body Modified PM Gears
In: 9th WZL Gear Conference in the USA 2022 : Gear and Transmission Research, July 20th/ 22th 2022, Elgin, IL/ USA( Hosted by Reishauer), 2-1-2-20, 2022

Scholzen, Philipp Alexander (Corresponding author)
Brimmers, Jens
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Method for the Semantic Modelling of the Product Context Using Text Mining for the Derivation of Innovation Potentials
In: IEEM2022 : IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : Kuala Lumpur, Malaysia, 07-10 December 2022 / organizers: IEEE TEMS - Technology & Engineering Management Society, IEEE TEMS Hong Kong Chapter, IEEE TEMS Malaysia Chapter, IEEE TEMS Singapore Chapter ; publisher: IEEE, 1242-1246, 2022
[DOI: 10.1109/IEEM55944.2022.9989701]

Riesener, Michael
Kuhn, Maximilian (Corresponding author)
Lauf, Hendrik (Corresponding author)
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
Vergleich von Anregungs- und Tragfähigkeitskenngrößen in der FE-Berechnung von Kunststoffzahnrädern zwischen linearem und nichtlinearem Materialverhalten
In: Dresdner Maschinenelemente Kolloquium - DMK 2022, 26.-27. April / Technische Universität Dresden ; Herausgeber: Prof. Dr.-Ing. Berthold Schlecht, 317-331, 2022

Namhoff, Christian (Corresponding author)
Hammerl, Georg
Brimmers, Jens
Brecher, Christian

[Contribution to a conference proceedings, Journal Article]
Mechanical Surface Treatment of Cold-Extruded Workpieces
In: Engineering proceedings, 26 (1), 24, 2022
[DOI: 10.3390/engproc2022026024]

Herrmann, Peter (Corresponding author)
Müller, Martina
Weiser, Ingo Felix
Herrig, Tim
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
5G enabled flexible lineless assembly systems with edge cloud controlled mobile robots
In: 2022 IEEE 33rd Annual International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) : 12-15 Sept. 2022, 1419-1424, 2022
[DOI: 10.1109/PIMRC54779.2022.9977496]

Ansari, Junaid (Corresponding author)
Hsiao, Tien-sung (Corresponding author)
Jafari, Mohammad Hossein (Corresponding author)
Varga, Balazs (Corresponding author)
Farkas, Janos (Corresponding author)
et al.

[Contribution to a conference proceedings, Journal Article]
Deep Rolling of Bores Using Centrifugal Force
In: Engineering proceedings, 26 (1), 20, 2022
[DOI: 10.3390/engproc2022026020]

Uhlmann, Lars Heinz (Corresponding author)
Weiser, Ingo Felix
Herrig, Tim
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Assessment and Comparison of the Machinability of Innovative Copper Alloys
In: Adapt to new challenges, take advantage of new opportunities : Copper Alloys 2022 : conference proceedings : Scientific Conference on Copper Materials / Kupfer[verband], SWERIM, RISE, 56-59, 2022

Zachert, Christoph
Brans, Kilian
Schraknepper, Daniel
Bergs, Thomas

[Journal Article]
Thermographic in-situ investigation of precise electrochemical machining
In: Procedia CIRP, 113, 404-409, 2022
[DOI: 10.1016/j.procir.2022.09.191]

Heidemanns, Lukas Franz
Herrig, Tim
Klink, Andreas
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Experimental analysis on the accuracy of two dimensional curved cuts in wire ECM
In: Procedia CIRP, 113, 398-403, 2022
[DOI: 10.1016/j.procir.2022.09.190]

Sous, F. (Corresponding author)
Heidemanns, Lukas Franz
Herrig, Tim
Klink, Andreas
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Influence of the WEDM rim zone on material specific thermo-physical properties
In: Procedia CIRP, 113, 29-34, 2022
[DOI: 10.1016/j.procir.2022.09.115]

Welschof, Lukas Gabriel (Corresponding author)
Boye, G.
Klink, Andreas
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Prediction of Geometrical Accuracy in Wire EDM by Analyzing Process Data
In: Procedia CIRP, 113, 23-28, 2022
[DOI: 10.1016/j.procir.2022.09.114]

Küpper, Ugur (Corresponding author)
Tchoupe Sambou, Hermann Elio
Klink, Andreas
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
White Layer Thickness Variation in Die Sinking EDM
In: Procedia CIRP, 113, 5-9, 2022
[DOI: 10.1016/j.procir.2022.09.111]

Oßwald, Kai (Corresponding author)
Schneider, Sebastian
Klink, Andreas
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Advancing electrochemical machining by the use of additive manufacturing for cathode production
In: Procedia CIRP, 112, 328-333, 2022
[DOI: 10.1016/j.procir.2022.09.005]

Heidemanns, Lukas Franz (Corresponding author)
Herrig, Tim
Klink, Andreas

[Contribution to a conference proceedings, Journal Article]
Process Signatures-Knowledge-based approach towards function-oriented manufacturing
In: Procedia CIRP, 108, 624-629, 2022
[DOI: 10.1016/j.procir.2022.01.001]

Karpuschewski, B.
Kinner-Becker, T. (Corresponding author)
Klink, Andreas
Langenhorst, L.
Mayer, Joachim
et al.

[Contribution to a conference proceedings, Journal Article]
Influence of Electrical and Thermal Conductivity of Cemented Carbides on the Wire EDM Process
In: Procedia CIRP, 113, 53-58, 2022
[DOI: 10.1016/j.procir.2022.09.119]

Olivier, Marcel Christoph (Corresponding author)
Küpper, Ugur
Herrig, Tim
Klink, Andreas
Bergs, Thomas

[Contribution to a conference proceedings]
Governance and technology for open peer review in a FAIR open access journal
In: NFDI4Ing Conference 2022 - Conference Contributions / Editor(s): Hamann, Tobias; Moser, Mario; Zeng, Michael, 34 Seiten, 2022
[DOI: 10.18154/RWTH-2023-02361]

Leštáková, Michaela
Heine, Ina
Pelz, Peter F.
Pelz, Peter (Editor)
Stäcker, Thomas (Editor)
et al.

[Contribution to a conference proceedings]
Unifying the Understanding of RDMin Engineering Science
In: NFDI4Ing Conference 2022 - Conference Contributions / Editor(s): Hamann, Tobias; Moser, Mario; Zeng, Michael, 1-19, 2022
[DOI: 10.18154/RWTH-2023-02357]

Schmitt, Robert H.
Rath, Michael
Moser, Mario Niclas
Hamann, Tobias

[Contribution to a conference proceedings]
NFDI4Ing Conference 2022 : Unifying the Understanding of RDM in Engineering Science : Fringe Programme
In: NFDI4Ing Conference 2022 - Conference Contributions / Editor(s): Hamann, Tobias; Moser, Mario; Zeng, Michael, 1-70, 2022
[DOI: 10.18154/RWTH-2023-02356]

Hamann, Tobias (Corresponding author)

[Journal Article]
Modeling of the temperature field induced during electrical discharge machining
In: CIRP journal of manufacturing science and technology, 38, 650-659, 2022
[DOI: 10.1016/j.cirpj.2022.05.012]

Schneider, Sebastian
Herrig, Tim
Klink, Andreas (Corresponding author)
Bergs, Thomas