[Book]
Managing the Fuzzy Front-End: Acht Erfolgsfaktoren für den Ideenprozess produzierender Unternehmen, 2021
[DOI: 10.24406/ipt-n-644066]

Schuh, Günther
Schwarberg, Thomas
Cobanoglu, Gabriel

[Contribution to a book, Contribution to a conference proceedings]
Data Analytics Production Line Optimization Model (DAPLOM) : A Systematic Framework for Process Optimizations
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, editors, 412-420, 2021
[DOI: 10.1007/978-3-030-78424-9_46]

Harman, Durmus (Corresponding author)
Buschmann, Daniel
Scheer, R.
Hellwig, M.
Knapp, M.
et al.

[Patent]
Anordnung aus einem Arbeitssystem zur Verrichtung von Arbeit mittels eines unter Druck stehenden Hydraulikfluids und einer Pumpvorrichtung, 2021

Reese Jimenez, Christian Hans
Fischer, Felix Lukas
Gärtner, Marcus Holger
Schmitz, Katharina

[Patent]
Verfahren zur Herstellung von Zahnflankenmodifikationen an Verzahnungen von Werkstücken sowie Werkzeuge zur Durchführung des Verfahrens, 2021

Löpenhaus, Christoph
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Dynamic Task Allocation for Cooperating, Heterogeneous Assembly Resources in LMAS
In: Towards sustainable customization bridging smart products and manufacturing systems : proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021 / Ann-Louise Andersen, Rasmus Andersen, Thomas Ditlev Brunoe, Maria Stoettrup Schioenning Larsen, Kjeld Nielsen, Alessia Napoleone, Stefan Kjeldgaard editors, 535-542, 2021
[DOI: 10.1007/978-3-030-90700-6_60]

Kluge-Wilkes, Aline Chantal (Corresponding author)
Schmitt, Robert H.

[Patent]
Verfahren zur Kontaktierung der Batteriezellen eines Batteriemoduls und Batterielöschvorrichtung dafür, 2021

Fiedler, Falko
Bergweiler, Georg
Bethlehem, Sören

[Patent]
Verfahren zur Erfassung einer axialen Verlängerung einer rotierenden Welle relativ zu einem Gehäuse, 2021

Fey, Marcel
Brecher, Christian
Eckel, Hans-Martin
Strachkov, Anton

[Contribution to a book, Contribution to a conference proceedings]
Decision Support by Interpretable Machine Learning in Acoustic Emission Based Cutting Tool Wear Prediction
In: IEEE IEEM 21 virtual : 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : 13-16 December 2021 / organizers: IEEE Singapore Section, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 629-633, 2021
[DOI: 10.1109/IEEM50564.2021.9673044]

Schmetz, A.
Vahl, C.
Zhen, Z.
Reibert, D.
Mayer, S.
et al.

[Contribution to a book, Contribution to a conference proceedings]
Explainable AI for error detection in composites : knowledge discovery in artificial neural networks
In: [SAMPE EUROPE Conference and Exhibition 2021 Baden/Zürich - Switzerland], 2021

Brillowski, Florian Sascha (Corresponding author)
Becker, Marco
Vermeulen, Markus
Trauth, Daniel
Bergs, Thomas
et al.

[Contribution to a book, Contribution to a conference proceedings]
Concept for competency-based resource allocation in multi-project environments
In: Proceedings of The 4th International Conference on Management, Economics and Finance : Zurich, Switzerland, 10th September 2021, 57-70, 2021

Riesener, Michael
Kuhn, Maximilian
Keuper, Alexander
Schuh, Günther

[Book, Report]
Ergebnisbericht Market Intelligence Konsortial-Benchmarking Studie, 2021

Schuh, Günther
Kuhn, Maximilian
Becker, Annika
Keuper, Alexander

[Journal Article]
Application of natural language processing for systematic requirement management in model-based systems engineering
In: INCOSE International Symposium, 31 (1), 806-815, 2021
[DOI: 10.1002/j.2334-5837.2021.00871.x]

Riesener, Michael (Corresponding author)
Dölle, Christian (Corresponding author)
Becker, Annika (Corresponding author)
Gorbatcheva, Sofia (Corresponding author)
Rebentisch, Eric (Corresponding author)
et al.

[Contribution to a conference proceedings, Journal Article]
Framework for an agile, databased development
In: Procedia CIRP, 100, 343-348, 2021

Riesener, Michael
Kuhn, Maximilian
Lauf, Hendrik
Schuh, Günther

[Contribution to a conference proceedings]
The Impact of Manufacturing Execution Systems on The Digital Transformation of Production Systems : A Maturity Based Approach
In: Conference on Production Systems and Logistics : International Conference, CPSL 2021, digital event hosted via publish-Ing., August 10-11, 2021 : proceedings / editors: Dr.-Ing. David Herberger, M.Sc. Marco Hübner, 446-456, 2021
[DOI: 10.15488/11258]

Fischer, Markus
Schuh, Günther
Stich, Volker

[Contribution to a conference proceedings]
Competitiveness of Air Taxis Regarding Door-To-Door Travel Time: A Race through Germany
In: Luft- und Raumfahrt - Verantwortung in allen Dimensionen : Deutscher Luft- und Raumfahrtkongress 2020 : 1.-3. September 2020, Online : Publikationen zum DLRK 2020 / DGLR, 10 pages, 2021
[DOI: 10.25967/530308]

Schuh, Günther
Spangenberg, Maximilian
Hoh, Johannes
Freitag, Matthias
Stumpf, Eike

[Contribution to a conference proceedings]
System and process development for functionalization of electrical components by laser-based gold micro deposition
In: Lasers in Manufacturing Conference 2021 : LiM 2021 / WLT, Wissenschaftliche Gesellschaft Lasertechnik e.V., 11 Seiten, 2021

Schmid, Tobias
Janssen, Henning
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Novel Maturity Model for Cybersecurity Evaluation in Industry 4.0
In: Advances in Cyber Security : Third International Conference, ACeS 2021, Penang, Malaysia, August 24-25, 2021, revised selected papers / Nibras Abdullah, Selvakumar Manickam, Mohammed Anbar (eds.), 198-210, 2021
[DOI: 10.1007/978-981-16-8059-5_12]

Kreppein, Alexander
Kies, Alexander
Schmitt, Robert H.

[Contribution to a book, Contribution to a conference proceedings]
Economically driven requirements for a hybrid-electric 19-passenger commuter aircraft
In: 10th EASN International Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens (10th EASN 2020), 2nd-5th September 2020, 8 Seiten, 2021
[DOI: 10.1088/1757-899X/1024/1/012079]

Schuh, Günther
Spangenberg, Maximilian
Zhang, Qinyin

[Book, Report]
Agile Innovation: Gestaltungsfelder der agilen Produktentwicklung, 2021

Schuh, Günther
Dölle, Christian
Kreutzer, Ramon
Ays, Laura Johanna
Ebi, Mauel
et al.

[Contribution to a book, Contribution to a conference proceedings]
Time-driven Activity-based Costing Using Process Data Mining
In: 2021 IEEE Technology & Engineering Management Conference - Europe (TEMSCON-EUR) / IEEE; IEEE TEMS ; TEMSCON-EUR 2021 conference general co-chairs: Marina Dabić, Andy Chen, 2021
[DOI: 10.1109/TEMSCON-EUR52034.2021.9488654]

Riesener, Michael
Dölle, Christian
Menges, Alexander Dominic
Schuh, Günther

[Contribution to a conference proceedings, Journal Article]
Framework for an agile, databased development
In: Procedia CIRP, 100, 343-348, 2021
[DOI: 10.1016/j.procir.2021.05.084]

Riesener, Michael
Kuhn, Maximilian
Lauf, Hendrik (Corresponding author)
Schuh, Günther

[Contribution to a conference proceedings, Journal Article]
Investigation of the diameter error when turning thin walled workpieces
In: Procedia CIRP, 102, 343-348, 2021

Bergs, Thomas
Knappe, Dominik (Corresponding author)
Husseini, K.
Pullen, T.
Schraknepper, Daniel
et al.

[Contribution to a conference proceedings, Journal Article]
Advanced calculation of the stress distribution in milling tools during cutting under consideration of residual stresses and tool wear
In: Procedia CIRP, 102, 19-24, 2021

Schraknepper, Daniel (Corresponding author)
Peng, Bingxiao
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Methodology for integrated additive-subtractive process chain generation204
In: Procedia CIRP, 100, 199-204, 2021

Wollbrink, Moritz (Corresponding author)
Dannen, Tammo
Arntz, Kristian
Prümmer, Marcel
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Tool wear progression of SiAlON ceramic end mills in five-axis high-feed rough machining of an Inconel 718 BLISK
In: Procedia CIRP, 101, 13-16, 2021

Zimmermann, Richard (Corresponding author)
Welling, David
Venek, Tommy
Ganser, Philipp
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Investigation of cutting mechanisms in the machining of Ceramic Matrix Composites (CMCs)
In: Procedia CIRP, 101, 330-333, 2021

Bergs, Thomas
Ganser, Philipp
Fruh, D.
Reisberg, Jannik (Corresponding author)

[Contribution to a conference proceedings, Journal Article]
Time- and Cost-Efficient Specification and Evaluation of Manufacturing Changes through Iterative Information Acquisition
In: Procedia CIRP, 104, 176-181, 2021

Hermann, L. (Corresponding author)
Weber, A.
Beckers, Alexander
Barth, Sebastian
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Development of a voxelization tool for the calculation of vector-based workpiece representations
In: Procedia CIRP, 100, 7-12, 2021

Bergs, Thomas
Henrichs, Oliver (Corresponding author)
Wilms, Marcel
Prümmer, Marcel
Arntz, Kristian

[Contribution to a conference proceedings, Journal Article]
CFD simulation to optimize the internal coolant channels of an additively manufactured milling tool
In: Procedia CIRP, 102, 234-239, 2021
[DOI: 10.1016/j.procir.2021.09.040]

Zachert, Christoph (Corresponding author)
Liu, Hui
Lakner, Thomas
Schraknepper, Daniel
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Investigation of the diameter error when turning thin walled workpieces
In: Procedia CIRP, 102, 343-348, 2021
[DOI: 10.1016/j.procir.2021.09.059]

Bergs, Thomas
Knappe, Dominik (Corresponding author)
Husseini, K.
Pullen, T.
Schraknepper, Daniel
et al.

[Contribution to a conference proceedings, Journal Article]
Advanced calculation of the stress distribution in milling tools during cutting under consideration of residual stresses and tool wear
In: Procedia CIRP, 102, 19-24, 2021
[DOI: 10.1016/j.procir.2021.09.004]

Schraknepper, Daniel (Corresponding author)
Peng, Bingxiao
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Tool wear progression of SiAlON ceramic end mills in five-axis high-feed rough machining of an Inconel 718 BLISK
In: Procedia CIRP, 101, 13-16, 2021
[DOI: 10.1016/j.procir.2021.02.003]

Zimmermann, Richard (Corresponding author)
Welling, David
Venek, Tommy
Ganser, Philipp
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Methodology for integrated additive-subtractive process chain generation
In: Procedia CIRP, 100, 199-204, 2021
[DOI: 10.1016/j.procir.2021.05.055]

Wollbrink, Moritz (Corresponding author)
Dannen, Tammo
Arntz, Kristian
Prümmer, Marcel
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Investigation of cutting mechanisms in the machining of Ceramic Matrix Composites (CMCs)
In: Procedia CIRP, 101, 330-333, 2021
[DOI: 10.1016/j.procir.2020.11.015]

Bergs, Thomas
Ganser, Philipp
Fruh, D.
Reisberg, Jannik (Corresponding author)

[Contribution to a conference proceedings, Journal Article]
Development of a voxelization tool for the calculation of vector-based workpiece representations
In: Procedia CIRP, 100, 7-12, 2021
[DOI: 10.1016/j.procir.2021.05.022]

Bergs, Thomas
Henrichs, Oliver (Corresponding author)
Wilms, Marcel
Prümmer, Marcel
Arntz, Kristian

[Contribution to a conference proceedings, Journal Article]
Time- and Cost-Efficient Specification and Evaluation of Manufacturing Changes through Iterative Information Acquisition
In: Procedia CIRP, 104, 176-181, 2021
[DOI: 10.1016/j.procir.2021.11.030]

Hermann, L. (Corresponding author)
Weber, A.
Beckers, Alexander
Barth, Sebastian
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Smart Resilience Services for Industrial Production
In: Automation 2021 : 22. Leitkongress der Mess- und Automatisierungstechnik : navigating towards resilient production : 29. und 30. Juni 2021 : digital, 621-636, 2021
[DOI: 10.51202/9783181023921-621]

Janzen, Sabine
Öksüz, Nurten
Sporkmann, Jan
Schlappa, Martin
Gerhard, Jens
et al.

[Contribution to a conference proceedings, Journal Article]
Three-dimensional multi-physical modelling of the influence of the cutting fluid on the chip formation process
In: Procedia CIRP, 102, 216-221, 2021

Liu, Hui
Peng, Bingxiao
Meurer, Markus Joachim
Schraknepper, Daniel
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Three Dimensional Numerical Modeling of Face Turning Using the Coupled-Eulerian-Lagrangian Formulation102
In: Procedia CIRP, 102, 162-167, 2021

Hardt, Marvin Yannick
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Spatially Resolved Tool Wear Prediction in Finish Milling
In: Procedia CIRP, 104, 85-90, 2021

Holst, Carsten (Corresponding author)
Königs, Michael
Garcia, Eduardo Maia
Ganser, Philipp
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
An Improved Model for Contour Damage Compensation in 3D Waterjet Machining
In: Procedia CIRP, 102, 387-392, 2021

Dadgar, M.
Schreiner, T. (Corresponding author)
Schüler, M.
Herrig, Tim
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Knowledge-Based Adaptation of Product and Process Design in Blisk Manufacturing
In: Proceedings of ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition : June 7-11, 2021, virtual, online. - Volume 7: Industrial and cogeneration, manufacturing materials and metallurgy, GT2021-59562, V007T17A012, 1-9, 2021
[DOI: 10.1115/GT2021-59562]

Ganser, Philipp (Corresponding author)
Landwehr, Markus
Schiller, Sven
Vahl, Christopher
Mayer, Sebastian
et al.

[Contribution to a conference proceedings, Journal Article]
Three Dimensional Numerical Modeling of Face Turning Using the Coupled-Eulerian-Lagrangian Formulation
In: Procedia CIRP, 102, 162-167, 2021
[DOI: 10.1016/j.procir.2021.09.028]

Hardt, Marvin Yannick (Corresponding author)
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Three-dimensional multi-physical modelling of the influence of the cutting fluid on the chip formation process
In: Procedia CIRP, 102, 216-221, 2021
[DOI: 10.1016/j.procir.2021.09.037]

Liu, Hui (Corresponding author)
Peng, Bingxiao
Meurer, Markus Joachim
Schraknepper, Daniel
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Spatially Resolved Tool Wear Prediction in Finish Milling
In: Procedia CIRP, 104, 85-90, 2021
[DOI: 10.1016/j.procir.2021.11.015]

Holst, Carsten (Corresponding author)
Königs, Michael
Garcia, Eduardo Maia
Ganser, Philipp
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Global Reward Design for Cooperative Agents to Achieve Flexible Production Control under Real-time Constraints
In: ICEIS 2021 : proceedings of the 23rd International Conference on Enterprise Information Systems : online streaming, April 26-28, 2021 / sponsored by INSTICC - Institute for Systems and Technologies of Information, Control and Communication ; edited by Joaquim Filipe, Michal Smialek, Alexander Brodsky and Slimane Hammoudi. - Volume 1, 515-526, 2021
[DOI: 10.5220/0010455805150526]

Pol, Sebastian
Baer, Schirin
Turner, Danielle
Samsonov, Vladimir
Meisen, Tobias (Corresponding author)

[Contribution to a conference proceedings, Journal Article]
Metrological Support of Medical Drillings at the Lateral Skull Base : Refinement of a drill with integrated temperature sensor technology
In: Current Directions in Biomedical Engineering, 7 (1), 171-175, 2021
[DOI: 10.1515/cdbme-2021-1037]

Knott, Anna-Lena (Corresponding author)
Kristin, Julia
Schipper, Jörg
Klenzner, Thomas
Prinzen, Tom
et al.

[Contribution to a conference proceedings, Journal Article]
Wear monitoring in fine blanking processes using feature based analysis of acoustic emission signals
In: Procedia CIRP, 104, 164-169, 2021

Unterberg, Martin Christian
Voigts, Herman Otto
Weiser, Ingo Felix
Feuerhack, Andreas
Trauth, Daniel
et al.

[Contribution to a book, Contribution to a conference proceedings]
Highly Iterative Planning of Mixed-Model Assembly Lines
In: Production at the leading edge of technology : proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 / Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg editors, 680-688, 2020
[DOI: 10.1007/978-3-662-62138-7_68]

Maetschke, Jan Niklas (Corresponding author)
Fränken, Bastian
Sauermann, Frederick Christian
Gützlaff, Andreas
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
Definition of Process Performance Indicators for the Application of Process Mining in End-to-End Order Processing Processes
In: Production at the leading edge of technology : proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 / Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg editors, 670-679, 2020
[DOI: 10.1007/978-3-662-62138-7_67]

Schmitz, Seth (Corresponding author)
Renneberg, Florian
Cremer, Sven Alexander
Gützlaff, Andreas (Corresponding author)
Schuh, Günther