Publications
Showing 451 - 500 of 9142 Results
Turn Page
- First Page
- Previous Page
- 201-250
- 351-400
- 401-450
- Sie sind auf Seite:451-500
- 501-550
- 551-600
- Last Page
- Next Page
- 701-750
-
SourceAuthors and Contributors
-
[Contribution to a conference proceedings, Journal Article]
DPART : a dital twin framework for the machining domain
In: MM Science journal, 2021 (5), 5134-5141, 2021
[DOI: 10.17973/MMSJ.2021_11_2021168]Ganser, P. (Corresponding author)
Venek, T.
Rudel, V.
Bergs, Thomas -
[Contribution to a conference proceedings, Journal Article]
Fundamental Investigations on the Machinability of Additively Manufactured Multi-Materials
In: MM Science journal, 2021, 5098-5105, 2021
[DOI: 10.17973/MMSJ.2021_11_2021160]Kelliger, Tobias (Corresponding author)
Schraknepper, D.
Bergs, Thomas -
[Book, Dissertation / PhD Thesis]
Feinschneiden mit Hartmetallstempeln
In: Ergebnisse aus der Produktionstechnik 26/2021, 2021Voigts, Herman Otto -
[Journal Article]
Identifikation qualitätskritischer Parameter
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 116 (10), 695-700, 2021
[DOI: 10.1515/zwf-2021-0154]Abramowski, Johann-Philip (Corresponding author)
Kies, Alexander
Landwehr, Inga
Aichele, Andreas
Hachgenei, Enno
et al. -
[Journal Article]
On the simulation of the first natural frequency of a tuned mass disc damper
In: MM Science journal, 2021 (4), 4924-4929, 2021
[DOI: 10.17973/MMSJ.2021_10_2021091]Brecher, Christian
Zhao, Guifeng (Corresponding author)
Fey, Marcel -
Schuh, Günther (Corrressponding author)
Patzwald, Marc (Corrressponding author)
Krebs, Leonie (Corrressponding author) -
[Contribution to a book, Contribution to a conference proceedings]
A Conceptual Model for Digital Shadows in Industry and Its Application
In: Conceptual Modeling : 40th International Conference, ER 2021, Virtual Event, October 18-21, 2021, Proceedings / Aditya Ghose, Jennifer Horkoff, Vítor E. Silva Souza, Jeffrey Parsons, Joerg Evermann, 271-281, 2021
[DOI: 10.1007/978-3-030-89022-3_22]Becker, Fabian
Bibow, Pascal
Dalibor, Manuela
Gannouni, Aymen
Hahn, Viviane
et al. -
[Abstract, Contribution to a conference proceedings]
Development of a technical-economic evaluation model for sustainable multifilament wound composite pressure vessels based on a Fuzzy Logic approach
In: Aachen-Dresden-Denkendorf : International Textile Conference : Digital Event, November 9-10, 2021 : Book of abstracts / Organization: Textil- und Faserforschung Denkendorf (DITF), DWI-Leibniz-Institut für Interaktive Materialien, Aachen, ITM, Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik der TU Dresden. - Scientific Board - Wissenschaftlicher Beirat: Bayram Aslan, Michael R. Buchmeiser, Chokri Cherif, Andreas Fery, Götz T. Gresser, Thomas Gries, Jochen Gutmann, Stefan Hecht, Andreas Herrmann, Heike Illing-Günther, Maike Rabe, Fabian Schreiber, Mathias Ulbricht, Lutz Vossebein, 70-71, 2021Kreutzer, Dennis (Corresponding author)
Mölling, Tim
Bitter-Krahe, Jan
Hees, Frank -
[Contribution to a conference proceedings]
Determination Of The Level Of Automation For Additive Manufacturing Process Chains
In: [2nd Conference on Production Systems and Logistics, CPSL 2021], 585-594, 2021
[DOI: 10.15488/11257]Horstkotte, Rainer
Bruning, Benedikt
Prümmer, Marcel
Arntz, Kristian
Bergs, Thomas -
[Contribution to a conference proceedings, Journal Article]
Friction behavior in metal cutting : Modeling and simulation
In: Procedia CIRP, 102, 405-410, 2021
[DOI: 10.1016/j.procir.2021.09.069]Abouridouane, Mustapha
Bergs, Thomas
Schraknepper, Daniel
Wirtz, Guido -
[Report]
Sektionskonzept Meta(daten), Terminologien und Provenienz zur Einrichtung einer Sektion im Verein Nationale Forschungsdateninfrastruktur (NFDI) e.V, 2021
[DOI: 10.5281/ZENODO.5619089]Koepler, Oliver (Corrressponding author)
Schrade, Torsten (Corrressponding author)
Neumann, Steffen
Stotzka, Rainer
Wiljes, Cord
et al. -
[Report]
Sektionskonzept Training & Education zur Einrichtung einer Sektion im Verein Nationale Forschungsdateninfrastruktur (NFDI) e.V, 2021
[DOI: 10.5281/ZENODO.5599770]Herres-Pawlis, Sonja (Corrressponding author)
Pelz, Peter (Corrressponding author)
Kockmann, Norbert
Gläser, Roger
Richter, Manuela
et al. -
[Journal Article]
Prädiktive Qualität in der Prozesslenkung : Neuronales Netz als SPC 4.0
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 116 (10), 662-666, 2021
[DOI: 10.1515/zwf-2021-0134]Beckschulte, Sebastian (Corresponding author)
Klasen, Nils
Huebser, Louis
Schmitt, Robert H. -
[Journal Article]
(Selbst-)lernendes Fehlermanagement : Expertise der Fehlerbearbeitung systematisch nutzbar machen
In: Qualität und Zuverlässigkeit, 66 (10), 14-16, 2021Günther, Robin Yannick Rocky (Corresponding author)
Beckschulte, Sebastian
Bennerscheid, Nicolas
Schmitt, Robert H. -
[Contribution to a conference proceedings]
Development of Digital Shadows for Production Control
In: Proceedings CPSL 2021 : 2nd Conference on Production Systems and Logistics (CPSL 2021) 10.-11.08.2021, online, 65-74, 2021
[DOI: 10.15488/11251]Schuh, Günther
Gützlaff, Andreas
Schmidhuber, Matthias
Maibaum, Judith (Corresponding author) -
[Contribution to a book, Contribution to a conference proceedings]
Requirements Engineering through Exploratory Analysis of Usage Data
In: 2021 IEEE Technology & Engineering Management Conference - Europe (TEMSCON-EUR) / IEEE; IEEE TEMS ; TEMSCON-EUR 2021 conference general co-chairs: Marina Dabić, Andy Chen, 314-319, 2021
[DOI: 10.1109/TEMSCON-EUR52034.2021.9488571]Riesener, Michael
Dölle, Christian
Lender, Benjamin Nils Johannes (Corresponding author)
Schuh, Günther -
[Contribution to a conference proceedings]
Pre-Selection Of Suitable Regression Methods For The Determination Of Interactions And Forecasts In Global Production Networks
In: Proceedings of the 2nd Conference on Production Systems and Logistics (CPSL 2021), 10.-11.08.2021, Vancouver/ Canada, Online, 749-759, 2021
[DOI: 10.15488/11239]Schuh, Günther
Gützlaff, Andreas
Ays, Julian Leander
Rodemann, Niklas (Corresponding author)
Podbreznik, Miha -
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Friction behavior in metal cutting : Modeling and simulation
In: Procedia CIRP, 102, 405-410, 2021Abouridouane, Mustapha (Corresponding author)
Bergs, Thomas
Schraknepper, Daniel
Wirtz, Guido -
[Journal Article]
Psychoacoustic Optimization of Gear Noise - Chaotic Scattering of Micro Geometry and Pitch on Cylindrical Gears
In: Gear technology, 2021 (7), 54-65, 2021Kasten, Marcel-Michél (Corresponding author)
Brimmers, Jens
Brecher, Christian -
[Contribution to a book, Contribution to a conference proceedings]
Autoencoder based Wear Assessment in Sheet Metal Forming
In: Digital technologies in sheet metal forming : 40th International Deep-Drawing Research Group Conference 2021 : Stuttgart, Germany / editors: Univ. Prof. Dr.-Ing. Dr.h.c. Mathias Liewald, MBA; Dr.sc.techn. Celalettin Karadogan, 012082, 2021
[DOI: 10.1088/1757-899X/1157/1/012082]Niemietz, Philipp (Corresponding author)
Unterberg, Martin Christian
Trauth, Daniel
Bergs, Thomas -
[Journal Article]
Fields of action towards automated facility layout design and optimization in factory planning : A systematic literature review
In: CIRP journal of manufacturing science and technology, 35, 864-871, 2021
[DOI: 10.1016/j.cirpj.2021.09.013]Burggräf, Peter
Adlon, Tobias
Hahn, Viviane (Corresponding author)
Schulz-Isenbeck, Timm -
[Journal Article]
Perception Engineering Learning With Virtual Reality
In: IEEE transactions on learning technologies, 14 (4), 500-514, 2021
[DOI: 10.1109/TLT.2021.3107407]Bohne, Thomas (Corresponding author)
Heine, Ina
Gurerk, Ozgur
Rieger, Christoph
Kemmer, Lukas
et al. -
[Book, Dissertation / PhD Thesis]
Virtual reference frame based on distributed large-scale metrology providing coordinates as a service
In: Ergebnisse aus der Produktionstechnik 27/2021, 2021
[DOI: 10.18154/RWTH-2021-10238]Montavon, Benjamin Leendert -
[Contribution to a book, Contribution to a conference proceedings]
Recurrent Online and Transfer Learning of a CNC-Machining Center with Support Vector Machines
In: Proceedings of 2021 IEEE 30th International Symposium on Industrial Electronics (ISIE), 7 Seiten, 2021
[DOI: 10.1109/ISIE45552.2021.9576328]Ay, Muzaffer (Corresponding author)
Schwenzer, Max
Abel, Dirk
Bergs, Thomas -
[Contribution to a book, Contribution to a conference proceedings]
Recommendations in E-learning: Identifying Current Trends with Automated Crawling Methods
In: EDULEARN21 : 13th International Conference on Education and New Learning Technologies : Conference Proceedings / Edited by L. Gómez Chova, A. López Martínez, I. Candel Torres, 7914-7920, 2021
[DOI: 10.21125/edulearn.2021.1615]Werz, Johanna Miriam
Schruff, Daniel
Schiffeler, Nina Maria
Borowski, Esther
Isenhardt, Ingrid -
[Journal Article]
Einflussfaktoren auf die Nutzungsintention von Pflegekräften zur Verwendung digitaler Technologien in der ambulanten Pflege : Fallstudie zur Einführung eines Sensortextils
In: Zeitschrift für Arbeitswissenschaft : ZfA, 75 (4), 470-490, 2021
[DOI: 10.1007/s41449-021-00277-4]Güsken, Sarah Ranjana (Corresponding author)
Frings, Katrin
Zafar, Faizan
Saltan, Timur
Fuchs-Frohnhofen, Paul
et al. -
[Book, Proceedings]
Internet of Production - Turning Data into Sustainability : AWK'21, 2021Bergs, Thomas (Editor)
Brecher, Christian (Editor)
Schmitt, Robert H. (Editor)
Schuh, Günther (Editor)
Krause, Susanne (Contributor)
et al. -
[Contribution to a book, Contribution to a conference proceedings]
Design of a semantic information model for automated tape placement systems using OPC-UA
In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 8 Seiten, 2021
[DOI: 10.1109/ETFA45728.2021.9613216]Peitz, Alexander Constantin (Corresponding author)
Striet, Philipp (Corresponding author)
Emonts, Michael Gustav (Corresponding author)
Fischer, Kai (Corresponding author)
Brecher, Christian (Corresponding author) -
[Contribution to a book, Contribution to a conference proceedings]
Thermal analysis of the laser-assisted tape placement process with a piece-flow principle
In: [SAMPE EUROPE Conference and Exhibition 2021 Baden/Zürich - Switzerland], 1-8, 2021Striet, Philipp
Emonts, Michael Gustav
Fischer, Kai
Brecher, Christian -
[Contribution to a book, Contribution to a conference proceedings]
Industrial Innovation & Employability - Sustainable Skilling of Smart Experts
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Herausgeber: AWK Aachener Werkzeugmaschinen-Kolloquium ; Thomas Bergs, Christian Brecher, Robert Schmitt, Günther Schuh ; weitere Mitwirkende: Susanne Krause, Alexander Kreppein, Christian Lürken, Markus Meurer, Heidi Peters, Michèle Robrecht, Stefanie Strigl, 369-404, 2021Metzmacher, Amelie Isabel
Hellebrandt, Thomas Sven
Adam, Tobias
Heine, Ina
Bergholz, Markus
et al. -
[Journal Article]
Efficient Determination of Stability Lobe Diagrams Deploying an Automated, Data-based Online NC Program Adaption
In: MM Science journal, 18 (4), 4830-4835, 2021
[DOI: 10.17973/MMSJ.2021_10_2021052]Brecher, Christian
Klimaschka, Ralph Bernhard (Corresponding author)
Steinert, Alexander
Neus, Stephan -
[Contribution to a conference proceedings]
Investigation of transformation behaviour of pseudoelastic NiTi shape memory alloys under compressive loading to assess the potential use in vibration damping in milling operations
In: Proceedings of the ASME 2021 Conference on Smart Materials, Adaptive Structures, and Intelligent Systems, SMASIS2021, September 14 - 15, 2021, Virtual Conference, SMASIS2021- 67467, 2021
[DOI: 10.1115/SMASIS2021-67467]Brecher, Christian
Klumpen, Niclas (Corresponding author)
Neus, Stephan
Dültgen, Peter E.
Theiß, Ralf
et al. -
[Contribution to a book, Journal Article]
A Survey on AI-Driven Digital Twins in Industry 4.0: Smart Manufacturing and Advanced Robotics
In: Sensors, 21 (19), Artikel 6340, 2021
[DOI: 10.3390/s21196340]Huang, Ziqi (Corresponding author)
Shen, Yang
Li, Jiayi
Fey, Marcel
Brecher, Christian -
[Contribution to a book, Contribution to a conference proceedings]
Nachhaltige Geschäftsmodelle für Werkzeugmaschinen
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Herausgeber: AWK Aachener Werkzeugmaschinen-Kolloquium ; Thomas Bergs, Christian Brecher, Robert Schmitt, Günther Schuh ; weitere Mitwirkende: Susanne Krause, Alexander Kreppein, Christian Lürken, Markus Meurer, Heidi Peters, Michèle Robrecht, Stefanie Strigl, 433-462, 2021Brecher, Christian
Butz, Felix
Kaever, Michael
Nagel, Erik
Neus, Stephan
et al. -
[Contribution to a book, Contribution to a conference proceedings]
Data Science in Production
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Herausgeber: AWK Aachener Werkzeugmaschinen-Kolloquium ; Thomas Bergs, Christian Brecher, Robert Schmitt, Günther Schuh ; weitere Mitwirkende: Susanne Krause, Alexander Kreppein, Christian Lürken, Markus Meurer, Heidi Peters, Michèle Robrecht, Stefanie Strigl, 221-257, 2021Brecher, Christian
Biernat, Benedikt Markus Hubert
Fey, Marcel
Kehne, Sebastian
Lohrmann, Vincent
et al. -
[Journal Article]
Einsatz von Zementbeton für den Ständer einer Werkzeugmaschine
In: Werkstoffe in der Fertigung, 58 (4), 28-30, 2021Brecher, Christian
Kiesewetter-Marko, Caroline (Corresponding author)
Neus, Stephan -
[Journal Article]
Intelligente Überwachung von Werkzeugverschleiß : Datenanalyse in der Produktion basierend auf maschinen-internen Daten
In: VDI-Z integrierte Produktion, 163 (09), 63-66, 2021
[DOI: 10.37544/0042-1766-2021-09-63]Brecher, Christian
Xi, Tiandong (Corresponding author)
Benincá, Igor Medeiros
Kehne, Sebastian
Fey, Marcel -
[Contribution to a book, Contribution to a conference proceedings]
Estimation-Based Temperature Control InLaser-Assisted, Thermoplastic Automated TapePlacement
In: [SAMPE EUROPE Conference and Exhibition 2021 Baden/Zürich - Switzerland], 2021Peitz, Alexander Constantin
Nalborczyk, Marcel
Emonts, Michael Gustav
Fischer, Kai
Brecher, Christian -
[News, Website]
Formgedächtnislegierungen - Schwingungen in der Maschine dämpfen
In: Maschinenmarkt, 2021Brecher, Christian
Klumpen, Niclas (Corresponding author)
Neus, Stephan
Dültgen, Peter
Theiß, R.
et al. -
Brecher, Christian
Klimaschka, Ralph Bernhard (Corresponding author)
Steinert, Alexander
Neus, Stephan -
[Contribution to a book, Journal Article]
Simulative and Experimental Determination of the Tooth Flank Fracture Load Capacity of Large Modulus Gears
In: Gear technology, 38 (August), 60-71, 2021Brecher, Christian
Löpenhaus, Christoph
Goergen, Fabian (Corresponding author) -
[Contribution to a book]
Der Data Lifecycle von der Erfassung bis zur Erkenntnis: Einsparpotentiale in der automatisierten Fertigungstechnik
In: Monetarisierung von technischen Daten: Innovationen aus Industrie und Forschung / Daniel Trauth, Thomas Bergs, Wolfgang Prinz (Hrsg.), 537-558, 2021
[DOI: 10.1007/978-3-662-62915-4_27]Brecher, Christian (Corresponding author)
Blanke, Philipp
Buchsbaum, Melanie Sarah Katharina
Dassen, Yannick
Fimmers, Christian (Corresponding author)
et al. -
[Journal Article]
Kompensation thermo-elastischer Maschinenfehler: Steigerung der Genauigkeit White-Box-basierter Korrekturmodelle
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 116 (7/8), 505-510, 2021
[DOI: 10.1515/zwf-2021-0122]Brecher, Christian
Fey, Marcel
Wittmann, Marcel (Corresponding author)
Dehn, Mathias -
[Journal Article]
Prozess-Maschine-Interaktion des Verzahnungshonens : Modellierung der Prozess-Maschine-Interaktion beim Verzahnungshonen
In: wt Werkstattstechnik online, 111 (5), 336-342, 2021
[DOI: 10.37544/1436-4980-2021-05-70]Brecher, Christian
Bergs, Thomas
Kiesewetter-Marko, Caroline (Corresponding author)
Schrank, Maximilian Günter
Neus, Stephan
et al. -
[Contribution to a book, Journal Article]
Reprint of: Automated stem cell production by bio-inspired control
In: CIRP journal of manufacturing science and technology, 34, 84-94, 2021
[DOI: 10.1016/j.cirpj.2021.06.010]Monostori, László (Corresponding author)
Csáji, Balázs Cs
Egri, Péter
Kis, Krisztián B.
Váncza, József
et al. -
[Contribution to a book, Contribution to a conference proceedings]
A 360-VR Authoring Tool for Engineering Teachers - Virtual Excursions for Mining Engineering Education Courses
In: Blended learning in engineering education: challenging, enlightening - and lasting? : SEFI 2021 49th Annual Conference : proceedings / editors: Hans-Ulrich Heiß, Hannu-Matti Järvinen, Annette Mayer, Alexandra Schulz, 283-292, 2021Khodaei, Samira
Abdelrazeq, Anas
Daling, Lea M.
Isenhardt, Ingrid -
[Contribution to a conference proceedings, Journal Article]
A two-step digitalization level assessment approach for manufacturing companies
In: Procedia manufacturing, 54, 25-30, 2021
[DOI: 10.1016/j.promfg.2021.07.005]Schuh, Günther
Scheuer, Thomas (Corresponding author)
Nick, Gábor
Szaller, Ádám
Várgedő, Tamás -
[Book, Dissertation / PhD Thesis]
Increasing fatigue strength of austenitic stainless steel using machine hammer peening
In: Ergebnisse aus der Produktionstechnik 25/2021, 2021Mannens, Robby Norbert -
[Journal Article]
Systematization of Technological and Economic Risks for the Selection of new Technologies
In: Journal of production systems and logistics, 1, 12 S.; Artikelnummer 15, 2021
[DOI: 10.15488/11349]Schuh, Günther
Scholz, Patrick
Krech, Max -
[Book, Dissertation / PhD Thesis]
A redesign with particular focus on human factors in the automotive development process
In: Berichte aus dem Maschinenbau, 2021Surendra, Sanjiv
Turn Page
- First Page
- Previous Page
- 201-250
- 351-400
- 401-450
- Sie sind auf Seite:451-500
- 501-550
- 551-600
- Last Page
- Next Page
- 701-750