Publications

Results�9091

Refine List

Source
[Contribution to a conference proceedings, Journal Article]
Investigations on five-axis milling and subsequent five-axis grinding of gears
In: Procedia CIRP, 107, 705-711, 2022
[DOI: 10.1016/j.procir.2022.05.049] Authors and Contributors
Bergs, Thomas
Schneider, Sebastian A. M.
Jan�en, Christopher Maria
Jahnel, K.
Ganser, Philip
et al.
Source
[Preprint]
Towards Digital Shadows for Production Planning and Control in Injection Molding, 2022
[DOI: 10.1016/j.cirpj.2022.05.003] Authors and Contributors
Sapel, Patrick (Corresponding author)
Gannouni, Aymen
Fulterer, Judith
Hopmann, Christian
Schmitz, Mauritius
et al.
Source
[Journal Article]
AI-Based Failure Management: Value Chain Approach in Commercial Vehicle Industry
In: Procedia CIRP, 109, 251-256, 2022
[DOI: 10.1016/j.procir.2022.05.245] Authors and Contributors
G�nther, Robin Yannick Rocky
Beckschulte, Sebastian
Wende, Martin
Mende, Hendrik
Schmitt, Robert H.
Source
[Journal Article]
Preferences for Single-Turn vs. Multiturn Voice Dialogs in Automotive Use Cases : Results of an Interactive User Survey in Germany
In: IEEE access, 10, 55020-55033, 2022
[DOI: 10.1109/ACCESS.2022.3174592] Authors and Contributors
Burggr�f, Peter
Beyer, Moritz (Corresponding author)
Ganser, Jan-Philip
Adlon, Tobias
M�ller, Katharina Maria
et al.
Source
[Journal Article]
Reinforcement Learning in Manufacturing Control: Baselines, challenges and ways forward
In: Engineering applications of artificial intelligence, 112, 104868, 2022
[DOI: 10.1016/j.engappai.2022.104868] Authors and Contributors
Samsonov, Vladimir
Ben Hicham, Karim
Meisen, Tobias
Source
[Contribution to a conference proceedings]
Explainable AI for error detection in composites : knowledge discovery in artificial neural networks
In: SAMPE EUROPE Conference and Exhibition 2021, Baden, Switzerland, 28-30 September 2021, 2022 Authors and Contributors
Brillowski, Florian Sascha (Corresponding author)
Becker, Marco
Vermeulen, Markus
Trauth, Daniel
Bergs, Thomas
et al.
Source
[Contribution to a book]
A Framework for the Classification of Human-Robot Interactions Within the Internet of Production
In: Human-Computer Interaction. Technological Innovation : Thematic Area, HCI 2022, Held as Part of the 24th HCI International Conference, HCII 2022, Virtual Event, June 26 - July 1, 2022, Proceedings, Part II / edited by Masaaki Kurosu, 427-454, 2022
[DOI: 10.1007/978-3-031-05409-9_33] Authors and Contributors
Baier, Ralph Oliver (Corresponding author)
Dammers, Hannah (Corresponding author)
Mertens, Alexander
Behery, Mohamed
Gossen, Daniel
et al.
Source
[Journal Article]
Microstructure impact on the machining of two gear steels. Part 1: Derivation of effective flow curves
In: Materials science and engineering / A, 845, 143125, 2022
[DOI: 10.1016/j.msea.2022.143125] Authors and Contributors
Laschet, Gottfried
Abouridouane, M.
Fern�ndez, M.
Budnitzki, M.
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Application of Transfer Learning for Detecting Fiber Orientations in Images of Fiber Reinforced Plastics
In: Materials science forum, 1064, 79-85, 2022
[DOI: 10.4028/p-bho5so] Authors and Contributors
Zhou, Hans Aoyang
Brillowski, Florian
Greb, Christoph
L�tticke, Daniel
Source
[Contribution to a conference proceedings, Journal Article]
ProdSim : An Open-source Python Package for Generating High-resolution Synthetic Manufacturing Data on Product, Machine and Shop-Floor Levels
In: Procedia CIRP, 107, 1343-1348, 2022
[DOI: 10.1016/j.procir.2022.05.155] Authors and Contributors
Fuchs, Tom
Enslin, Chrismarie (Corresponding author)
Samsonov, Vladimir
L�tticke, Daniel
Schmitt, Robert H.
Source
[Book, Dissertation / PhD Thesis]
Gestaltungsmodell f�r eine vernetzte adaptive Montage im Werkzeugbau
In: Ergebnisse aus der Produktionstechnik 21/2022, 2022 Authors and Contributors
Goertz, David
Source
[Book, Dissertation / PhD Thesis]
Simulation of the dynamic vibration behaviour and spindle speed optimization during the milling process of turbomachinery components
In: Ergebnisse aus der Produktionstechnik 24/2022, 2022 Authors and Contributors
Maslo, Semir
Source
[Contribution to a conference proceedings, Journal Article]
An extended LuGre model for estimating nonlinear frictions in feed drive systems of machine tools
In: Procedia CIRP, 107, 452-457, 2022 Authors and Contributors
Xi, Tiandong
Fujita, Tomoya
Kehne, Sebastian
Ikeda, Ryosuke
Fey, Marcel
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Edge computing-based virtual measuring machine for process-parallel prediction of workpiece quality in metal cutting
In: Procedia CIRP, 107, 363-368, 2022 Authors and Contributors
Huang, Ziqi
Wiesch, Marian
Fey, Marcel
Brecher, Christian
Source
[Poster]
Flying Fuel Cells and the challenges for bipolar plate forming
In: Aachen Hydrogen Colloquium 2022 Aachen 2022-05-03 - 2022-05-04, 2022 Authors and Contributors
Horstkotte, Rainer
Gierlings, Sascha
Herrig, Tim
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Reactive online scheduling of mobile resources for adaptive layout evolution in line-less assembly system
In: Procedia CIRP, 107, 270-275, 2022
[DOI: 10.1016/j.procir.2022.04.044] Authors and Contributors
Kaven, Lea
Rachner, Jonas Sebastian
Schmid, Thomas
G�ppert, Mirko Robin Amon
Schmitt, Robert H.
Source
[Contribution to a conference proceedings, Journal Article]
Evaluation of Material Shortage Effect on Assembly Systems Considering Flexibility Levels
In: Procedia CIRP, 107, 966-971, 2022
[DOI: 10.1016/j.procir.2022.05.093] Authors and Contributors
Melnychuk, Oleksandr
Rachner, Jonas Sebastian
Kaven, Lea
G�ppert, Mirko Robin Amon
Schmitt, Robert H.
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Highly iterative concept development for requirement-compliant air taxis
In: IOP conference series / Materials science and engineering, 1226 (1), Nr. 012043, 8 pp., 2022
[DOI: 10.1088/1757-899X/1226/1/012043] Authors and Contributors
Schuh, G�nther
Spangenberg, M.
Meyer-Hollatz, T.
Source
[Journal Article]
Expectation management in AI implementation projects : a case study
In: EuroMed journal of business, 2022
[DOI: 10.1108/EMJB-10-2021-0161] Authors and Contributors
Buschmeyer, Katharina
Hatfield, Sarah
Heine, Ina
Jahn, Svenja
Markus, Antonia Lea
Source
[Journal Article]
Human-centered performance management in manual assembly : The impact of gamified KPI provision on performance and motivation
In: International journal of computer integrated manufacturing, 2022
[DOI: 10.1080/0951192X.2022.2078512] Authors and Contributors
Ohlig, Jasmin
Hellebrandt, Thomas Sven (Corresponding author)
P�tters, Patrick
Heine, Ina
Schmitt, Robert H.
et al.
Source
[Journal Article]
Measurement uncertainty of a new machine-integrated, PSD based approach for thermo-elastic error measurement
In: MM Science journal, 2022, 5713-5720, 2022
[DOI: 10.17973/MMSJ.2022_06_2021191] Authors and Contributors
Brecher, Christian
Spierling, Robert (Corresponding author)
Fey, Marcel
Source
[Contribution to a book]
An energy efficient production technology for the recycling of thermoplastic tape into a new semi-finished product for further use
In: SAMPE Europe Conference 2021 Baden/Zurich. Innovating Towards Perfection. Baden/Zurich, Switzerland and Online 29-30 September 2021. Volume 2 of 2, 680-687, 2022 Authors and Contributors
Schwane, Martin
Schulz, Malena
Janssen, Henning
Brecher, Christian
Source
[Contribution to a conference proceedings, Journal Article]
Preparation of Papers for IFAC Conferences & Symposia : Adaptive fixture system for reducing machining distortion caused by residual stresses in milling
In: IFAC-PapersOnLine, 55 (2), 264-269, 2022
[DOI: 10.1016/j.ifacol.2022.04.204] Authors and Contributors
Landwehr, Markus
Kalocsay, R. (Corresponding author)
Kolvenbach, Christian
Ganser, Philipp
Bergs, Thomas
Source
[Contribution to a book]
Cost-effective production of glass fibre reinforced towpregs
In: SAMPE Europe Conference 2021 Baden/Zurich. Innovating Towards Perfection. Baden/Zurich, Switzerland and Online 29-30 September 2021. Volume 1 of 2, 527-534, 2022 Authors and Contributors
von Helden, Jonathan
Baumann, Heiko
Janssen, Henning
Brecher, Christian
Source
[Contribution to a conference proceedings, Journal Article]
ProdSim : An Open-source Python Package for Generating High-resolution Synthetic Manufacturing Data on Product, Machine and Shop-Floor Levels
In: Procedia CIRP, 107, 1343-1348, 2022 Authors and Contributors
Fuchs, Tom
Enslin, Chrismarie (Corresponding author)
Samsonov, Vladimir
L�tticke, Daniel
Schmitt, Robert H.
Source
[Journal Article]
Application of a multi tuned mass disc dampers system to a portal milling machine
In: MM Science journal, 2022 (2), 5620-5628, 2022
[DOI: 10.17973/MMSJ.2022_06_2022048] Authors and Contributors
Brecher, Christian
Zhao, Guifeng (Corresponding author)
Fey, Marcel
Source
[Contribution to a book, Journal Article]
5G-Based Multi-Sensor Platform for Monitoring of Workpieces and Machines : Prototype Hardware Design and Firmware
In: Electronics : open access journal, 11 (10), 1619, 2022
[DOI: 10.3390/electronics11101619] Authors and Contributors
Mohanram, Praveen
Passarella, Alice
Zattoni, Elena (Corresponding author)
Padovani, Roberto
K�nig, Niels
et al.
Source
[Contribution to a book, Journal Article]
Smart Automotive E-Mobility—A Proposal for a New Curricula for Engineering Education
In: Education Sciences, 12 (5), 316, 2022
[DOI: 10.3390/educsci12050316] Authors and Contributors
Curiel-Ramirez, Luis Alberto (Corresponding author)
Bautista-Montesano, Rolando
Galluzzi, Renato
Izquierdo-Reyes, Javier
Ram�rez-Mendoza, Ricardo A.
et al.
Source
[Journal Article]
Investigations on the Potential of 5G for the Detection of Wear in Industrial Roller-Burnishing Processes
In: Electronics, 11 (11), 14 pp., 2022
[DOI: 10.3390/electronics11111678] Authors and Contributors
Kosel, Maximilian
Schippers, Tobias
Abdul, Aziz
Ishii, Kristina
Mainczyk, Jacek
et al.
Source
[Contribution to a book, Journal Article]
Prototype of 5G Integrated with TSN for Edge-Controlled Mobile Robotics
In: Electronics : open access journal, 11 (11), 1666, 2022
[DOI: 10.3390/electronics11111666] Authors and Contributors
Kehl, Pierre (Corresponding author)
Ansari, Junaid
Jafari, Mohammad Hossein
Becker, Paul
Sachs, Joachim
et al.
Source
[Journal Article]
Empirical Study on 5G NR Cochannel Coexistence
In: Electronics, 11 (11), 13 pp., 2022
[DOI: 10.3390/electronics11111676] Authors and Contributors
Caro, Jordi Biosca
Ansari, Junaid
Sachs, Joachim
de Bruin, Peter
Sivri, Sertap
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Analysis of tool wear in face hobbing plunging manufacturing processes
In: Procedia CIRP, 107, 1174-1179, 2022 Authors and Contributors
Alexopoulos, Charalampos (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Source
[Journal Article]
A systematic approach towards mastering complexity through hybrid assembly planning
In: CIRP journal of manufacturing science and technology, 15 (38), 159-171, 2022
[DOI: 10.1016/j.cirpj.2022.04.011] Authors and Contributors
F�lling, Carsten (Corresponding author)
Burggr�f, Peter
Wang, Siyuan
Adlon, Tobias
Source
[Journal Article]
Digitale Fabrikplanung als Bef�higer zur Erreichung der Klimaziele: Skalierbares Fabrik- und Produktionskonzept f�r die Serienproduktion von Wasserelektrolyseuren
In: wt Werkstattstechnik online, 112 (04), 210-215, 2022
[DOI: 10.37544/1436-4980-2022-04-10] Authors and Contributors
Burggr�f, Peter
Adlon, Tobias
Beyer, Moritz
Xu, Tingni
Lehde genannt Kettler, Nils (Corresponding author)
et al.
Source
[Contribution to a conference proceedings, Journal Article]
An extended LuGre model for estimating nonlinear frictions in feed drive systems of machine tools
In: Procedia CIRP, 107, 452-457, 2022
[DOI: 10.1016/j.procir.2022.05.007] Authors and Contributors
Xi, Tiandong (Corresponding author)
Fujita, Tomoya
Kehne, Sebastian
Ikeda, Ryosuke
Fey, Marcel
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Edge computing-based virtual measuring machine for process-parallel prediction of workpiece quality in metal cutting
In: Procedia CIRP, 107, 363-368, 2022
[DOI: 10.1016/j.procir.2022.04.059] Authors and Contributors
Huang, Ziqi (Corresponding author)
Wiesch, Marian
Fey, Marcel
Brecher, Christian
Source
[Journal Article]
Identification of a Practical Digital Twin for Simulation of Machine Tools
In: International journal of automation technology, 16 (3), 261-268, 2022
[DOI: 10.20965/ijat.2022.p0261] Authors and Contributors
Fujita, Tomoya
Xi, Tiandong (Corresponding author)
Ikeda, Ryosuke
Kehne, Sebastian
Fey, Marcel
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Analysis of the Impact of the Tolerance Chain on the Excitation Behavior in Series Gearboxes
In: Dresdner Maschinenelemente Kolloquium DMK 2022, 293-316, 2022 Authors and Contributors
Roth, L. (Corresponding author)
Brimmers, J.
Brecher, C.
Source
[Journal Article]
Optimierte Antriebs- und Sensorauslegung f�r intelligente Vorschubachssysteme
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 117 (6), 368-373, 2022
[DOI: 10.1515/zwf-2022-1063] Authors and Contributors
Herfs, Werner
Kehne, Sebastian (Corresponding author)
Neus, Stephan
Source
[Contribution to a conference proceedings, Journal Article]
Analysis of tool wear in face hobbing plunging manufacturing processes
In: Procedia CIRP, 107, 1174-1179, 2022
[DOI: 10.1016/j.procir.2022.05.127] Authors and Contributors
Alexopoulos, Charalampos (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Digital Vehicle Protocol based on Distributed Ledger Technology in Production
In: Procedia CIRP, 107, 804-809, 2022 Authors and Contributors
Beckschulte, Sebastian (Corresponding author)
Huebser, Louis
Kiesel, Raphael
Schmitt, Robert H.
Source
[Abstract, Contribution to a conference proceedings, Journal Article]
Towards Automated Car-T Cell Manufacturing - Keeping up with Technological Advancement
In: Cytotherapy : official journal of ISCT, the International Society for Cellular Therapy, 24 (5, Supplement), S166-S166, 2022
[DOI: 10.1016/S1465-3249(22)00437-6] Authors and Contributors
Herbst, Laura Marie
Erkens, Frederik
Hort, Simon
Baeckel, Niklas
Niessing, Bastian
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Digital Vehicle Protocol based on Distributed Ledger Technology in Production
In: Procedia CIRP, 107, 804-809, 2022
[DOI: 10.1016/j.procir.2022.05.066] Authors and Contributors
Beckschulte, Sebastian (Corresponding author)
Huebser, Louis
Kiesel, Raphael
Schmitt, Robert H.
Source
[Contribution to a book, Journal Article]
Techno-Economic Evaluation of 5G-NSA-NPN for Networked Control Systems
In: Electronics : open access journal, 11 (11), 1736, 2022
[DOI: 10.3390/electronics11111736] Authors and Contributors
Kiesel, Raphael (Corresponding author)
Schmitt, Sarah
K�nig, Niels
Brochhaus, Maximilian
Vollmer, Thomas
et al.
Source
[Journal Article]
Towards digital shadows for production planning and control in injection molding
In: CIRP journal of manufacturing science and technology : CIRP-JMST, 38, 243-251, 2022
[DOI: 10.1016/j.cirpj.2022.05.003] Authors and Contributors
Sapel, Patrick (Corresponding author)
Gannouni, Aymen
Fulterer, Judith
Hopmann, Christian
Schmitz, Mauritius
et al.
Source
[Book, Dissertation / PhD Thesis]
Bewertung von Produktvarianten mittels Process Data Mining
In: Ergebnisse aus der Produktionstechnik 18/2022, 2022 Authors and Contributors
Menges, Alexander Dominic
Source
[Contribution to a book, Journal Article]
Design for 3D Printed Tools: Mechanical Material Properties for Direct Polymer Additive Tooling
In: Polymers, 14 (9), 1694, 2022
[DOI: 10.3390/polym14091694] Authors and Contributors
Frohn-S�rensen, Peter (Corresponding author)
Geueke, Michael
Engel, Bernd
L�ffler, Bernd Wolfgang (Corresponding author)
Bickendorf, Philipp
et al.
Source
[Book, Dissertation / PhD Thesis]
Datenbasierte Beschreibung der Prozessperformance in der Auftragsabwicklung
In: Ergebnisse aus der Produktionstechnik 23/2022, 2022 Authors and Contributors
Schmitz, Seth
Source
[Book, Dissertation / PhD Thesis]
Applikation maschinell lernender Systeme in der vernetzten adaptiven Produktion
In: Ergebnisse aus der Produktionstechnik 19/2022, 2022 Authors and Contributors
Scholz, Paul
Source
[Book, Dissertation / PhD Thesis]
Standortrollen in Produktionsnetzwerken
In: Ergebnisse aus der Produktionstechnik 10/2022, 2022 Authors and Contributors
Fr�nken, Bastian
Source
[Book, Proceedings]
Aachen Forum on Gear Production: Gear Finishing Technology and Quality Inspection 9th - 10th November 2021, 2022 Authors and Contributors
Bergs, Thomas (Editor)
Brecher, Christian (Editor)
Source
[Book, Dissertation / PhD Thesis]
Model-based process prediction for predictive-reactive scheduling in automated stem cell production
In: Ergebnisse aus der Produktionstechnik 15/2022, 2022 Authors and Contributors
Ochs, Jelena
Source
[Book, Dissertation / PhD Thesis]
Optimizing hyperparameters for machine learning algorithms in production
In: Ergebnisse aus der Produktionstechnik 31/2022, 2022 Authors and Contributors
Krau�, Jonathan
Source
[Book, Dissertation / PhD Thesis]
Werkzeugseitiger Einsatz von NiTi-FGL zur Verbesserung der dynamischen Prozessstabilit�t bei der Fr�sbearbeitung
In: Ergebnisse aus der Produktionstechnik Band 16/2022, 2022 Authors and Contributors
Sch�fer, Alexander
Source
[Contribution to a conference proceedings, Journal Article]
Deep learning and rule-based image processing pipeline for automated metal cutting tool wear detection and measurement
In: IFAC-PapersOnLine, 55 (2), 534-539, 2022
[DOI: 10.1016/j.ifacol.2022.04.249] Authors and Contributors
Holst, Carsten (Corresponding author)
Yavuz, Taha Berk
Gupta, Pranjul
Ganser, Philipp
Bergs, Thomas
Source
[Journal Article]
Analysis of the thermo-mechanical load and productivity during force-compliant grinding of pcBN
In: Journal of materials processing technology, 305, 117604, 2022
[DOI: 10.1016/j.jmatprotec.2022.117604] Authors and Contributors
M�ller, Ulrich Hermann (Corresponding author)
Prinz, Sebastian
Barth, Sebastian
Bergs, Thomas
Source
[Journal Article]
Development of a Life Cycle Model for Deep Tech Startups
In: Journal of production systems and logistics, 2, 5, 2022
[DOI: 10.15488/11730] Authors and Contributors
Schuh, G�nther
Studerus, Bastian
H�mmerle, Carsten
Source
[Journal Article]
Description Approach for the Transfer of Competencies and Resources in Collaborations Between Corporates and Deep Tech Startups
In: Journal of production systems and logistics, 2, 7, 2022
[DOI: 10.15488/11860] Authors and Contributors
Schuh, G�nther
Studerus, Bastian
Rohmann, Aaron
Source
[Journal Article]
Defining the Intelligent Manufacturing Enterprise
In: Journal of production systems and logistics, 2, 6, 2022
[DOI: 10.15488/11731] Authors and Contributors
Schuh, G�nther
Scheuer, Thomas
Padovano, Riley Colleen
Source
[Journal Article]
Schneller als ein Wimpernschlag : Highspeed-Mikroskopie f�r Hochdurchsatz-Qualit�tskontrolle
In: InVision : Bildverarbeitung, embedded vision & KI, Messtechnik, 2022 (2), 48-49, 2022 Authors and Contributors
Narrog, Florian
Nie�ing, Bastian
Schmitt, Robert H.
Source
[Book, Dissertation / PhD Thesis]
Bewertungsmetrik leistungsbestimmender Faktoren von Supply-Chains in Industriebetrieben
In: Schriftenreihe Rationalisierung 183, 2022 Authors and Contributors
Scholz, Svenja Julia
Source
[Contribution to a book, Contribution to a conference proceedings]
Transmitter Positioning of Distributed Large-Scale Metrology Within Line-Less Mobile Assembly Systems
In: Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021 / edited by Thorsten Sch�ppstuhl, Kirsten Tracht, Annika Raatz, 15-26, 2022
[DOI: 10.1007/978-3-030-74032-0_2] Authors and Contributors
Nicksch, Christoph (Corresponding author)
H�ttner, Alexander K.
Schmitt, Robert H.
Source
[Journal Article]
Adaptive Pr�fung in der Variantenproduktion - Durch App-basierte Pr�fplanung Aufw�nde reduzieren
In: Qualit�t und Zuverl�ssigkeit, 67 (3), 14-16, 2022 Authors and Contributors
Huber, Meike (Corresponding author)
Greipel, Jonathan Simon
Schmitt, Robert H.
Source
[Journal Article]
Data fusion of local and global sensors within a Global Reference System in aeroplane assembly
In: Technisches Messen, / (0), /, 2022
[DOI: 10.1515/teme-2022-0008] Authors and Contributors
Huber, Meike (Corresponding author)
Nicksch, Christoph
Schmitt, Robert H.
Source
[Journal Article]
Daten sind Gold wert : Warum Datenmanagement f�r Unternehmen zum Erfolgsfaktor wird
In: Qualit�t und Zuverl�ssigkeit : QZ, 67 (5), 22-25, 2022 Authors and Contributors
Beckschulte, Sebastian
Schlegel, Peter
G�nther, Robin Yannick Rocky
Schmitt, Robert H.
Source
[Journal Article]
Applicability of Advanced Manufacturing Technologies for Agile Product Development in the Internet of Production : A Strategic Framework
In: Journal of production systems and logistics, 2, 8, 2022
[DOI: 10.15488/11958] Authors and Contributors
Kelbel, Hannah Carlotta
Stoecker, Lena
Frank, Julius Johannes
Lukas, Gerret
Bergweiler, Georg
et al.
Source
[Book, Dissertation / PhD Thesis]
Methodik zur Integration pulverbettbasierter additiver Fertigungstechnologien in Fertigungsprozessketten
In: Ergebnisse aus der Produktionstechnik 20, 2022 Authors and Contributors
Wollbrink, Moritz
Source
[Contribution to a book, Contribution to a conference proceedings]
Mit AIMS zu einem Metadatenmanagement 4.0 : FAIRe Forschungsdaten ben�tigen interoperable Metadaten
In: E-Science-Tage 2021 : share your research data / herausgegeben von Vincent Heuveline und Nina Bisheh, 91-104, 2022
[DOI: 10.11588/HEIBOOKS.979.C13721] Authors and Contributors
Gr�newald, Matthias
Mund, Patrick
Bodenbenner, Matthias Stefan
Fuhrmans, Marc
Heinrichs, Benedikt Paul Anton
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Condensing measurement data along the process chain into a single geometrical digital shadow
In: [NDE 4.0, Predictive Maintenance, and Communication and Energy Systems in a Globally Networked World : Proceedings], 31-44, 2022
[DOI: 10.1117/12.2609400] Authors and Contributors
Geiger, Kilian Leonard (Corresponding author)
Grosseheide, Jonas
Montavon, Benjamin Leendert
Schmitt, Robert H.
Source
[Journal Article]
Wertsch�pfungsketten�bergreifendes Fehlermanagement : Transparente Einblicke in komplexe Zusammenh�nge zwischen Produktentstehung und -nutzung erfolgreich erschlie�en und verwerten
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 117 (4), 187-191, 2022
[DOI: 10.1515/zwf-2022-1036] Authors and Contributors
G�nther, Robin Yannick Rocky (Corresponding author)
Beckschulte, Sebastian
Wende, Martin
Schmitt, Robert H.
Source
[Journal Article]
Low-Temperature Physical Vapor Deposition TiAlCrSiN Coated High-Speed Steel : Comparison Between Shot-Peened and Polished Substrate Condition
In: Advanced engineering materials, 2200099, 2022
[DOI: 10.1002/adem.202200099] Authors and Contributors
Bobzin, Kirsten
Kalscheuer, Christian
Carlet, Marco
Hoffmann, Dennis Christopher (Corresponding author)
Bergs, Thomas
et al.
Source
[Journal Article]
Sensitivity analysis of specific metrics for automated evaluation of layout changeability
In: Production engineering, 2022
[DOI: 10.1007/s11740-022-01131-0] Authors and Contributors
Burggr�f, Peter
Dannapfel, Heinrich Matthias
Hahn, Viviane (Corresponding author)
Schulz-Isenbeck, Timm
Source
[Journal Article]
Standzeitoptimierung bei Blechverarbeitungswerkzeugen
In: Blech : das Fachmagazin f�r die Bearbeitung von Blechen, Rohren und Profilen, 30 (2), 50-51, 2022 Authors and Contributors
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Ebbecke, Christoph Wilhelm
Haase, Bernd (Corresponding author)
Source
[Journal Article]
Clustering zur Bestimmung von Werkzeugverschlei� : Hybride Modellierung durch automatisches Clustering von Prozessverhalten zur Vorhersage von Werkzeugverschlei� bei der Fr�sbearbeitung
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 117 (3), 218-223, 2022
[DOI: 10.1515/zwf-2022-1027] Authors and Contributors
Brecher, Christian
Lohrmann, Vincent (Corresponding author)
Wiesch, Marian
Fey, Marcel
Source
[Book, Dissertation / PhD Thesis]
Closing the loop of model predictive force control in milling with ensemble Kalman filtering
In: Ergebnisse aus der Produktionstechnik 13/2022, 2022
[DOI: 10.18154/RWTH-2022-03843] Authors and Contributors
Schwenzer, Max
Source
[Contribution to a book, Contribution to a conference proceedings]
Towards Cargo Wagons Brake Health Scoring through Image Processing
In: Proceedings of the 11th International Conference on Pattern Recognition Applications and Methods : February 3-5, 2022 / editors: Maria De Marsico, Gabriella Sanniti di Baja and Ana Fred ; [sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC)], 423-431, 2022
[DOI: 10.5220/0010824300003122] Authors and Contributors
Posada Moreno, Andres Felipe
Otte, Thomas
Pehar, Damir
Ha�ler, Marc
Bartels, Holger
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Condition Monitoring of Rail Infrastructure and Rolling Stock using Acceleration Sensor Data of on-Rail Freight Wagons
In: Proceedings of the 11th International Conference on Pattern Recognition Applications and Methods : February 3-5, 2022 / editors: Maria De Marsico, Gabriella Sanniti di Baja and Ana Fred ; [sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC)], 432-439, 2022
[DOI: 10.5220/0010824600003122] Authors and Contributors
Otte, Thomas
Posada Moreno, Andres Felipe
H�benthal, Fabian
Ha�ler, Marc
Bartels, Holger
et al.
Source
[Journal Article]
Internet of production: entering phase two of industry 4.0
In: Communications of the ACM, 65 (4), 50-51, 2022
[DOI: 10.1145/3514093] Authors and Contributors
Kappel, Gertrude
Brecher, Christian
Brockmann, Matthias
Koren, Istv�n
Source
[Book, Dissertation / PhD Thesis]
Methodik zur Gestaltung von Technologieketten und Prozessfolgen nach lebensphasen�bergreifend �kologisch-�konomischen Kriterien
In: Ergebnisse aus der Produktionstechnik 5/2022, 2022 Authors and Contributors
Gr�nebaum, Timm Christian
Source
[Book, Dissertation / PhD Thesis]
Entscheidungsprozess zur kontinuierlichen Gestaltung von Produktionsnetzwerken
In: Ergebnisse aus der Produktionstechnik 14/2022, 2022 Authors and Contributors
G�tzlaff, Andreas
Source
[Journal Article]
Predicting basin stability of power grids using graph neural networks
In: New journal of physics, 2022
[DOI: 10.1088/1367-2630/ac54c9] Authors and Contributors
Nauck, Christian (Corresponding author)
Lindner, Michael
Sch�rholt, Konstantin
Zhang, Haoming
Schultz, Paul
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Uncertainty and Changeability in Manufacturing Equipment Planning
In: Procedia CIRP, 106, 221-226, 2022 Authors and Contributors
Burggr�f, Peter
Adlon, Tobias
Kahmann, Hannes (Corresponding author)
R�hl, Leonard
Source
[Contribution to a conference proceedings, Journal Article]
Adaptive Remanufacturing : Decision Model for the Intelligent Maintenance of Production Resources
In: Procedia CIRP, 105, 219-224, 2022 Authors and Contributors
Burggr�f, Peter
Adlon, Tobias
Dackweiler, Jonas
Br�hl, Florian (Corresponding author)
F�lling, Carsten
Source
[Book, Dissertation / PhD Thesis]
Implementierung von Manufacturing Execution Systems basierend auf Industrie-4.0-Reifegradmodellen
In: Schriftenreihe Rationalisierung 182, 2022 Authors and Contributors
Fischer, Markus Franz Peter
Source
[Book, Dissertation / PhD Thesis]
Entwicklung von Technologiestrategien in einem volatilen Unternehmensumfeld
In: Ergebnisse aus der Produktionstechnik 6/2022, 2022 Authors and Contributors
Patzwald, Marc
Source
[Contribution to a conference proceedings]
Safety and Machine Concept for Green Laser Welding in Battery Production
In: [Konferenz LEF Bricks 2022 - Laser in der Elektronikproduktion & Feinwerktechnik. Brick 1: Laser in der Fertigung von Batterien & Elektromotoren, Virtuel, 2022-01-12 - 2022-01-12, Erlangen, Germany], 23 S., 2022
[DOI: 10.13140/RG.2.2.17077.96487] Authors and Contributors
Fiedler, Falko (Corresponding author)
Bergweiler, Georg
H�ltgen, Christian
Schuh, G�nther
Source
[Contribution to a conference proceedings, Journal Article]
Adaptive Remanufacturing : Decision Model for the Intelligent Maintenance of Production Resources
In: Procedia CIRP, 105, 219-224, 2022
[DOI: 10.1016/j.procir.2022.02.036] Authors and Contributors
Burggr�f, Peter
Adlon, Tobias
Dackweiler, Jonas
Br�hl, Florian (Corresponding author)
F�lling, Carsten
Source
[Contribution to a conference proceedings, Journal Article]
Uncertainty and Changeability in Manufacturing Equipment Planning
In: Procedia CIRP, 106, 221-226, 2022
[DOI: 10.1016/j.procir.2022.02.182] Authors and Contributors
Burggr�f, Peter
Adlon, Tobias
Kahmann, Hannes (Corresponding author)
R�hl, Leonard
Source
[Contribution to a book, Contribution to a conference proceedings]
Reducing Time-To-Market in the Highly Iterative and Integrated Product and Production Process Development (HIP3D)
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, editors, 601-609, 2021
[DOI: 10.1007/978-3-030-78424-9_66] Authors and Contributors
Wlecke, Shari (Corresponding author)
G�tzlaff, Andreas
Schmitz, Seth
Mehler, Johannes
Wutzow, Kai Uwe
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Concept for a Complexity-Oriented Structuring of Corporate Value Networks for the Provision of Product-Service Systems
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, editors, 675-683, 2022
[DOI: 10.1007/978-3-030-78424-9_74] Authors and Contributors
Kre�, Julian Maximilian (Corresponding author)
D�lle, C.
Riesener, M.
Schuh, G.
Source
[Contribution to a book, Contribution to a conference proceedings]
Methodology for the Design of a Modular Process Structure Using Communality Matrices
In: Production at the leading edge of technology: proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis editors, 583-591, 2021
[DOI: 10.1007/978-3-030-78424-9_64] Authors and Contributors
Perau, Stefan (Corresponding author)
D�lle, Christian
Riesener, Michael
Schuh, G�nther
Source
[Journal Article]
Betriebsbew�hrtheit von Feldger�ten : Datenanalyse mit System: Wie KI und Text Mining das Leben von Feldger�ten verl�ngern
In: Process / [Deutsche Ausgabe], 29 (3), 18-22, 2022 Authors and Contributors
Bennerscheid, Nicolas (Corresponding author)
Beckschulte, Sebastian
Wangerow, Kai
Schmitt, Robert H.
Source
[Book, Report]
W�lzfr�sen im Schrupp- und Schlichtschnitt zum Weichverzahnen mit h�chsten Oberfl�cheng�ten - Fertigw�lzfr�sen II : Schlussbericht vom 03.01.2022 : Berichtszeitraum: 01.01.2019-30.06.2021
In: IGF-Vorhaben 20391, 2022 Authors and Contributors
Tro�, Nico (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Source
[Journal Article]
High-Frequency Vibration Tests for Cement Concrete for Machine Tools (300-500 Hz)
In: Journal of vibration engineering & technologies, 2022
[DOI: 10.1007/s42417-022-00475-2] Authors and Contributors
Brecher, Christian
Kiesewetter-Marko, Caroline (Corresponding author)
Kalthoff, Matthias
Neus, Stephan
Source
[Contribution to a book, Contribution to a conference proceedings]
Managing Complex Interactions between Production and Failure Management : a System-theoretical Model
In: 2021 International Conference on Electrical, Computer and Energy Technologies (ICECET), 9-10 Dec. 2021, 5 Seiten, 2022
[DOI: 10.1109/ICECET52533.2021.9698640] Authors and Contributors
Beckschulte, Sebastian (Corresponding author)
Liang, Junjie
G�nther, Robin Yannick Rocky
Schmitt, Robert H.
Source
[Journal Article]
Schadensdiagnose an angetriebenen Werkzeugen mittels MEMS-Sensorik
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 117 (3), 128-132, 2022
[DOI: 10.1515/zwf-2022-1021] Authors and Contributors
Brecher, Christian
Neus, Stephan
Christoffers, Daniel (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Data Quality Assessment to Apply Process Mining in Production Processes
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, editors, 515-524, 2022
[DOI: 10.1007/978-3-030-78424-9_57] Authors and Contributors
Neumann, Henning (Corresponding author)
M�ller-Roden, Moritz
Schmitz, Seth
G�tzlaff, Andreas
Schuh, G�nther
Source
[Contribution to a book, Contribution to a conference proceedings]
Databased Decision Support for the Design of Business Processes in Manufacturing Companies
In: Production at the leading edge of technology: proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis editors, 565-573, 2021
[DOI: 10.1007/978-3-030-78424-9_62] Authors and Contributors
Schopen, Marco (Corresponding author)
Geesmann, Lars
Schmitz, Seth
G�tzlaff, Andreas
Schuh, G�nther
Source
[Journal Article]
Model predictive force control in milling based on an ensemble KALMAN filter
In: Journal of intelligent manufacturing, 2022
[DOI: 10.1007/s10845-022-01931-2] Authors and Contributors
Schwenzer, Max
Stemmler, Sebastian
Ay, Muzaffer
R�ppel, Adrian K. (Corresponding author)
Bergs, Thomas
et al.
Source
[Book, Dissertation / PhD Thesis]
Modeling the material behavior under metal cutting conditions
In: Ergebnisse aus der Produktionstechnik 7/2022, 2022 Authors and Contributors
Hardt, Marvin Yannick
Source
[Journal Article]
Influence of the Tool Wear on the Quality and Service Life of Gears for the Geared Turbofan Technology Machined by Five-Axis Milling
In: Journal of engineering for gas turbines and power, 144 (6), 061005, 2022
[DOI: 10.1115/1.4053911] Authors and Contributors
Zachert, Christoph (Corresponding author)
Lakner, Thomas
Greschert, Ren�
Schraknepper, Daniel
Bergs, Thomas
Source
[Journal Article]
Anwendungsf�lle der Brennstoffzelle im Nutzfahrzeugsektor
In: Motortechnische Zeitschrift, 83 (2/3), 16-23, 2022
[DOI: 10.1007/s35146-021-0782-6] Authors and Contributors
Schuh, G�nther
Schenk, Leonard
Scholz, Paul
Source
[Book, Dissertation / PhD Thesis]
An empiric quality control framework to enhance conventional manufacturing
In: Ergebnisse aus der Produktionstechnik 11/2022, 2022 Authors and Contributors
Galland, Laura
Source
[Contribution to a book, Journal Article]
Inline Optical Coherence Tomography for Multidirectional Process Monitoring in a Coaxial LMD-w Process
In: Applied Sciences, 12 (5), 2701, 2022
[DOI: 10.3390/app12052701] Authors and Contributors
Stehmar, Charlotte (Corresponding author)
Gipperich, Marius
Kogel-Hollacher, Markus
Velazquez Iturbide, Alfredo
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Process stabilization through pulsed laser-induced melt pool shaping in dual-beam LMD
In: Laser 3D Manufacturing IX : [Proceedings] - SPIE, 2022. - ISBN 97815106485559781510648562 - doi:10.1117/12.2606192, 10 Seiten, 2022
[DOI: 10.1117/12.2606192] Authors and Contributors
Gipperich, Marius
Gr�fe, Stefan
Day, Robin
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
CAD-based AND/OR Graph Generation Algorithms in (Dis)assembly Sequence Planning of Complex Products
In: Procedia CIRP, 106, 144-149, 2022 Authors and Contributors
M�nker, S�ren (Corresponding author)
Schmitt, Robert H.
Source
[Book, Dissertation / PhD Thesis]
Beitrag zur Qualit�tssicherung beim in-situ Tape-Legen komplexer Laminate
In: Ergebnisse aus der Produktionstechnik 9/2022, 2022
[DOI: 10.18154/RWTH-2022-02788] Authors and Contributors
Buschhoff, Clemens
Source
[Contribution to a conference proceedings, Journal Article]
CAD-based AND/OR Graph Generation Algorithms in (Dis)assembly Sequence Planning of Complex Products
In: Procedia CIRP, 106, 144-149, 2022
[DOI: 10.1016/j.procir.2022.02.169] Authors and Contributors
M�nker, S�ren (Corresponding author)
Schmitt, Robert H.
Source
[Book, Dissertation / PhD Thesis]
Modellierung und Prognose der Qualit�tswahrnehmung mittels Machine Learning
In: Ergebnisse aus der Produktionstechnik 12/2022, 2022 Authors and Contributors
Gussen, Lars Christopher Konrad
Source
[Journal Article]
Entscheidungsunterst�tzung im Produktionsmanagement
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 117 (3), 98-103, 2022
[DOI: 10.1515/zwf-2022-1015] Authors and Contributors
M�ller, Kai Bruno (Corresponding author)
Buschmann, Daniel
Cramer, Simon Tristan
Enslin, Chrismarie
Fischer, Markus
et al.
Source
[Book, Dissertation / PhD Thesis]
Referenzmodell f�r das Customer-Success-Management im Subskriptionsgesch�ft des Maschinen-und Anlagenbaus
In: Schriftenreihe Rationalisierung 181, 2022 Authors and Contributors
Holst, Lennard
Source
[Journal Article]
Virtual indoor-GPS for measurement uncertainty determination in reconfigurable environments
In: Production engineering : research and development, 16 Seiten, 2022
[DOI: 10.1007/s11740-022-01111-4] Authors and Contributors
Nicksch, Christoph (Corresponding author)
Sabzehi, Mielad
Schmitt, Robert H.
Source
[Contribution to a book, Journal Article]
Asymptotic Posterior Normality of Multivariate Latent Traits in an IRT Model
In: Psychometrika : a journal of quantitative psychology, 27 Seiten, 2022
[DOI: 10.1007/s11336-021-09838-2] Authors and Contributors
Kornely, Mia Johanna
Kateri, Maria (Corresponding author)
Source
[Contribution to a book, Journal Article]
Performance of 5G Trials for Industrial Automation
In: Electronics : open access journal, 11 (3), 412, 2022
[DOI: 10.3390/electronics11030412] Authors and Contributors
Ansari, Junaid (Corresponding author)
Andersson, Christian
de Bruin, Peter
Farkas, J�nos
Grosjean, Leefke
et al.
Source
[Book, Dissertation / PhD Thesis]
Model predictive control strategy to coordinate production planning and building automation
In: Ergebnisse aus der Produktionstechnik 4/2022, 2022
[DOI: 10.18154/RWTH-2022-02403] Authors and Contributors
Zhou, Beiyan
Source
[Journal Article]
Effect of Friction Modelling on Damage Prediction in Deep Drawing Simulations of Rotationally Symmetric Cups
In: Defect and diffusion forum : DDF, 414, 103-109, 2022
[DOI: 10.4028/p-29o20d] Authors and Contributors
Nick, Matthias (Corresponding author)
M�ller, Martina (Corresponding author)
Voigts, Herman Otto (Corresponding author)
Weiser, Ingo Felix (Corresponding author)
Herrig, Tim (Corresponding author)
et al.
Source
[Journal Article]
Perspectives on data-driven models and its potentials in metal forming and blanking technologies
In: Production engineering, 19 Seiten, 2022
[DOI: 10.1007/s11740-022-01115-0] Authors and Contributors
Liewald, Mathias (Corresponding author)
Bergs, Thomas
Groche, Peter
Behrens, Bernd-Arno
Briesenick, David
et al.
Source
[Contribution to a book, Journal Article]
Visualizing Street Pavement Anomalies through Fog Computing V2I Networks and Machine Learning
In: Sensors, 22 (2), 456, 2022
[DOI: 10.3390/s22020456] Authors and Contributors
Bustamante-Bello, Rogelio (Corresponding author)
Garc�a-Barba, Alec
Arce-Saenz, Luis A.
Curiel Ramirez, Luis Alberto
Izquierdo-Reyes, Javier
et al.
Source
[Journal Article]
Methodology for the integrative adaption of manufacturing process and inspection sequences to component changes of safety-critical medical products
In: Production engineering, 2022
[DOI: 10.1007/s11740-022-01114-1] Authors and Contributors
Stauder, Lars Niklas (Corresponding author)
Knott, Anna-Lena
Schmitt, Robert H.
Bergs, Thomas
Source
[Journal Article]
Prediction of the critical conditions for dynamic recrystallization in metals
In: International journal of materials research : IJMR, 94 (5), 628-635, 2022
[DOI: 10.1515/ijmr-2003-0109] Authors and Contributors
Gottstein, G�nter (Corresponding author)
Br�nger, E.
Frommert, M.
Goerdeler, M.
Zeng, M.
et al.
Source
[Book, Dissertation / PhD Thesis]
Methodik zur potenzial- und risikobasierten Technologiebewertung
In: Ergebnisse aus der Produktionstechnik 8/2022, 2022 Authors and Contributors
Scholz, Patrick
Source
[Book, Dissertation / PhD Thesis]
Definition und Auslegung von datenbasierten Dienstleistungen im Werkzeugbau
In: Ergebnisse aus der Produktionstechnik 1/2022, 2022 Authors and Contributors
Boshof, Julian
Source
[Contribution to a book, Contribution to a conference proceedings]
Investigation of Combined Flat Coining and Fine Blanking of 16MnCr5 to Influence the Die Roll Formation
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, editors, 112-121, 2021
[DOI: 10.1007/978-3-030-78424-9_13] Authors and Contributors
Schweinshaupt, Frank Oliver (Corresponding author)
Weiser, Ingo Felix
Herrig, Tim
Bergs, Thomas
Source
[Contribution to a book]
Feinschneidbarkeit von Mangan-Bor-Stahl
In: Tagungsband zum 16. Erlanger Workshop Warmblechumformung 2021, 2022 Authors and Contributors
Weiser, Ingo Felix
Herrig, Tim
Bergs, Thomas
Source
[Book, Dissertation / PhD Thesis]
Cost-efficient design of adaptations for manufacturing process sequences of safety-critical components
In: Ergebnisse aus der Produktionstechnik 2/2022, 2022 Authors and Contributors
Hermann, Lennard W.
Source
[Contribution to a book, Contribution to a conference proceedings]
Controlled Synthesis of Fibre-reinforced Plastics Images from Segmentation Maps using Generative Adversarial Neural Networks
In: Proceedings of the 14th International Conference on Agents and Artificial Intelligence : February 3-5, 2022 / editors: Ana Paula Rocha, Luc Steels and Jaap van den Herik, 801-809, 2022
[DOI: 10.5220/0010913700003116] Authors and Contributors
Schaaf, Nicolas
Zhou, Hans Aoyang
Enslin, Chrismarie
Brillowski, Florian Sascha
L�tticke, Daniel
Source
[Journal Article]
Model-Based, Experimental Thermoelastic Analysis of a Large Scale Turbine Housing
In: Journal of machine engineering, 22 (1), 84-95, 2022
[DOI: 10.36897/jme/146435] Authors and Contributors
Emonts, Dominik
Sanders, Mark Pascal
Montavon, Benjamin Leendert
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Generating Customer Insights Using the Digital Shadow of the Customer
In: Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems : Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021 / edited by Ann-Louise Andersen, Rasmus Andersen, Thomas Ditlev Brunoe, Maria Stoettrup Schioenning Larsen, Kjeld Nielsen, Alessia Napoleone, Stefan Kjeldgaard, 322-329, 2021
[DOI: 10.1007/978-3-030-90700-6_36] Authors and Contributors
Briele, Kristof Rene (Corresponding author)
Lindemann, Marie
Kiesel, Raphael
Schmitt, Robert H.
Source
[Contribution to a book, Journal Article]
Towards a Data Lake for High Pressure Die Casting
In: Metals : open access journal, 12 (2), 349, 2022
[DOI: 10.3390/met12020349] Authors and Contributors
Rudack, Maximilian Markus (Corresponding author)
Rath, Michael (Corresponding author)
Vroomen, Uwe
B�hrig-Polaczek, Andreas
Source
[Contribution to a book, Contribution to a conference proceedings]
Optimisation of a Workpiece Clamping Position with Reinforcement Learning for Complex Milling Applications
In: Machine Learning, Optimization, and Data Science : 7th International Conference, LOD 2021, Grasmere, UK, October 4-8, 2021, Revised Selected Papers, Part II / edited by Giuseppe Nicosia, Varun Ojha, Emanuele La Malfa, Gabriele La Malfa, Giorgio Jansen, Panos M. Pardalos, Giovanni Giuffrida, Renato Umeton, 261-276, 2022
[DOI: 10.1007/978-3-030-95470-3_20] Authors and Contributors
Enslin, Chrismarie
Samsonov, Vladimir (Corresponding author)
K�pken, Hans-Georg
B�r, Schirin
L�tticke, Daniel
Source
[Book, Dissertation / PhD Thesis]
Interdisziplin�re Spezifikation produktionstechnischer Systeme
In: Ergebnisse aus der Produktionstechnik 36/2021, 2022 Authors and Contributors
Flender, Jerome
Source
[Contribution to a book, Contribution to a conference proceedings]
Investigation of the Ball Motion Behavior in Spindle Bearings under Dynamic Loads
In: 23rd International Colloquium Tribology : Industrial and Automotive Lubrication, 385-387, 2022 Authors and Contributors
Eckel, Hans-Martin (Corresponding author)
Brecher, Christian
Neus, Stephan
Source
[Journal Article]
Feature selection for measurement models
In: International journal of quality & reliability management, 2022
[DOI: 10.1108/IJQRM-07-2021-0245] Authors and Contributors
Mueller, Tobias
Segin, Alexander
Weigand, Christoph
Schmitt, Robert H.
Source
[Journal Article]
Understanding Kinematics of the Orthogonal Cutting Using Digital Image Correlation : Measurement and Analysis
In: Journal of manufacturing science and engineering, 144 (3), 031008, 2021
[DOI: 10.1115/1.4051917] Authors and Contributors
Zhang, Dong (Corresponding author)
Meurer, Markus Joachim (Corresponding author)
Zhang, Xiao-Ming (Corresponding author)
Bergs, Thomas (Corresponding author)
Ding, Han (Corresponding author)
Source
[Conference Presentation]
Hochleistungswerkstoffe aus der Luft- und Raumfahrt : Schleifverhalten von faserverst�rkten Nichtoxidkeramiken
In: Schleiftagung 2022 online 2022-01-26 - 2022-01-27, 2022 Authors and Contributors
Prinz, Sebastian
Source
[Book, Dissertation / PhD Thesis]
Smart retrofitting as a structured approach for an organization to implement industry 4.0 using its existing resources
In: Ergebnisse aus der Produktionstechnik 3/2022, 2022
[DOI: 10.18154/RWTH-2022-01548] Authors and Contributors
Guerreiro, Bruno Vallarelli
Source
[Book, Dissertation / PhD Thesis]
Organisation von Subskription im Maschinen- und Anlagenbau
In: Ergebnisse aus der Produktionstechnik 35/2021, 2022 Authors and Contributors
Liu, Yuan
Source
[Book, Dissertation / PhD Thesis]
Verbesserung von Effizienz und Zuverl�ssigkeit der Produktentwicklung durch adaptives Anforderungsmanagement
In: Ergebnisse aus der Produktionstechnik 30/2021, 2022
[DOI: 10.18154/RWTH-2022-01261] Authors and Contributors
Pickshaus, Tobias
Source
[Journal Article]
Decentralized Holonic Control System Model for Line-less Mobile Assembly Systems
In: Robotics and computer-integrated manufacturing, 75, 102301, 2022
[DOI: 10.1016/j.rcim.2021.102301] Authors and Contributors
Buckhorst, Armin Friedrich (Corresponding author)
Grahn, Lea
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Framework for Potential Analysis by Approximating Line-Less Assembly Systems with AutoML
In: Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems : Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021 / edited by Ann-Louise Andersen, Rasmus Andersen, Thomas Ditlev Brunoe, Maria Stoettrup Schioenning Larsen, Kjeld Nielsen, Alessia Napoleone, Stefan Kjeldgaard, 423-430, 2021
[DOI: 10.1007/978-3-030-90700-6_48] Authors and Contributors
Kaven, Lea (Corresponding author)
Rachner, Jonas Sebastian
G�ppert, Mirko Robin Amon
Saeed, Sazvan
Schmitt, Robert H.
Source
[Book]
Special Issue "5G Technology in Smart Manufacturing"
In: Electronics : open access journal, 2021 Authors and Contributors
Schmitt, Robert H. (Editor)
Sachs, Joachim (Editor)
Source
[Contribution to a book, Contribution to a conference proceedings]
Design and Evaluation of a Function-Oriented Tooth Flank Roughness
In: Aachen Forum on Gear Production: Gear Finishing Technology and Quality Inspection 9th - 10th November 2021 / Thomas Bergs, Christian Brecher (eds.), 177-192, 2022 Authors and Contributors
Lang, Martin (Corresponding author)
Bergs, Thomas
Brimmers, Jens
Source
[Contribution to a book, Contribution to a conference proceedings]
Potentials and Challenges of Profile Gear Grinding with Vitrified Bonded cBN
In: Aachen Forum on Gear Production: Gear Finishing Technology and Quality Inspection 9th - 10th November 2021 / Thomas Bergs, Christian Brecher (eds.), 31-47, 2022 Authors and Contributors
Schalley, Babette (Corresponding author)
Bergs, Thomas
Brimmers, Jens
Solf, Mareike
Source
[Journal Article]
Adaptive surface geometry determination in multi-material x-ray computed tomography using fringe projection
In: Measurement science and technology, 33 (4), 044001, 2022
[DOI: 10.1088/1361-6501/ac41dc] Authors and Contributors
Gro�eheide, Jonas
Geiger, Kilian Leonard
Schmidt, �nderson
B�tow, Calvin
Montavon, Benjamin Leendert
et al.
Source
[Contribution to a book, Journal Article]
Techno-Economic Evaluation of 5G Technology for Automated Guided Vehicles in Production
In: Electronics : open access journal, 11 (2), 192, 2022
[DOI: 10.3390/electronics11020192] Authors and Contributors
Kiesel, Raphael (Corresponding author)
Henke, Leonhard
Mann, Alexander Wilhelm
Renneberg, Florian
Stich, Volker
et al.
Source
[Journal Article]
Identification and Analysis of Patterns of Machine Learning Systems in the Connected, Adaptive Production
In: Journal of production systems and logistics, 2, 1, 2022
[DOI: 10.15488/11626] Authors and Contributors
Schuh, G�nther
Scholz, Paul
Portik, Johannes
Source
[Contribution to a book, Contribution to a conference proceedings]
Sustainability of Factories in Urban Surroundings Enabled by a Space Efficiency Approach
In: Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems : Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021 / edited by Ann-Louise Andersen, Rasmus Andersen, Thomas Ditlev Brunoe, Maria Stoettrup Schioenning Larsen, Kjeld Nielsen, Alessia Napoleone, Stefan Kjeldgaard, 987-996, 2021
[DOI: 10.1007/978-3-030-90700-6_113] Authors and Contributors
Burggr�f, Peter
Dannapfel, Heinrich Matthias (Corresponding author)
Uelpenich, Jerome
Source
[Book]
Nachhaltigen Wandel gestalten : Innovationsimpulse der RWTH, 2022
[DOI: 10.18154/RWTH-2021-11153] Authors and Contributors
F�rster, Agnes (Responsible party)
F�rster, Agnes (Redactor)
Strobel, Eva Christine (Redactor)
B�schen, Stefan Karl Josef (Redactor)
Letmathe, Peter (Redactor)
et al.
Source
[Journal Article]
Method for Calculating Plastic Deformation of High Resolution and Large Contact Area
In: Journal of tribology, 144 (1), 011502, 2021
[DOI: 10.1115/1.4050603] Authors and Contributors
Sklenak, Sebastian (Corresponding author)
Mevissen, D. (Corresponding author)
Brimmers, Jens (Corresponding author)
Brecher, Christian (Corresponding author)
Source
[Journal Article]
Electrochemical Defect Analysis of Additive Manufactured Components
In: Journal of engineering for gas turbines and power, 144 (1), 011001, 2022
[DOI: 10.1115/1.4052199] Authors and Contributors
Sous, Florian (Corresponding author)
Herrig, Tim (Corresponding author)
Bergs, Thomas (Corresponding author)
Karges, Florian (Corresponding author)
Feiling, Nicole (Corresponding author)
et al.
Source
[Journal Article]
Effect of electrode material on removal efficiency regarding single discharges in wire EDM
In: The international journal of advanced manufacturing technology, 120 (3/4), 1583-1589, 2021
[DOI: 10.1007/s00170-021-07858-x] Authors and Contributors
Welschof, Lukas Gabriel (Corresponding author)
Sch�fer, Niklas Cedric
Herrig, Tim
Klink, Andreas
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings]
Dynamic Task Allocation for Cooperating, Heterogeneous Assembly Resources in LMAS
In: Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems : Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021 / edited by Ann-Louise Andersen, Rasmus Andersen, Thomas Ditlev Brunoe, Maria Stoettrup Schioenning Larsen, Kjeld Nielsen, Alessia Napoleone, Stefan Kjeldgaard, 535-542, 2021
[DOI: 10.1007/978-3-030-90700-6_60] Authors and Contributors
Kluge-Wilkes, Aline Chantal (Corresponding author)
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Mobile Robot Base Placement for Assembly Systems: Survey, Measures and Task Clustering
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, Editors, 439-447, 2021
[DOI: 10.1007/978-3-030-78424-9_49] Authors and Contributors
Kluge-Wilkes, Aline Chantal (Corresponding author)
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Hybrid Modelling in Production: Approach and Evaluation
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, Editors, 535-544, 2021
[DOI: 10.1007/978-3-030-78424-9_59] Authors and Contributors
Dori�en, Jonas (Corresponding author)
Schmitt, Robert H.
Source
[Journal Article]
Express Wire Coil Cladding as an Advanced Technology to Accelerate Additive Manufacturing and Coating
In: Journal of engineering for gas turbines and power, 144 (2), 021003, 2021
[DOI: 10.1115/1.4052089] Authors and Contributors
Gipperich, Marius (Corresponding author)
Riepe, Jan
Day, Robin (Corresponding author)
Bergs, Thomas (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Semantically Meaningful Segmentation of Milling Process Data
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, Editors, 319-327, 2021
[DOI: 10.1007/978-3-030-78424-9_36] Authors and Contributors
Ochel, Janis (Corresponding author)
Fey, Marcel
Brecher, Christian
Source
[Contribution to a book, Contribution to a conference proceedings]
Internet of Sustainability - Data-Driven Sustainability Management in Production
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis Editors, 639-647, 2021
[DOI: 10.1007/978-3-030-78424-9_70] Authors and Contributors
Briele, Kristof Rene (Corresponding author)
Chhor, Jimmy
Nuy, Leo Max
Sohnius, Felix
Gussen, Lars Christopher Konrad
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Quality Improvement Through Data Analysis - Qualification of Failure Management by Standardized Failure Recording in Manual Assembly
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis Editors, 574-582, 2021
[DOI: 10.1007/978-3-030-78424-9_63] Authors and Contributors
Beckschulte, Sebastian (Corresponding author)
G�nther, Robin Yannick Rocky
Kiesel, Raphael
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Concept for competency-based resource allocation in multi-project environments
In: Proceedings of The 4th International Conference on Management, Economics and Finance : Zurich, Switzerland, 10th September 2021, 57-70, 2021 Authors and Contributors
Riesener, Michael
Kuhn, Maximilian
Keuper, Alexander
Schuh, G�nther
Source
[Book, Report]
Ergebnisbericht Market Intelligence Konsortial-Benchmarking Studie, 2021 Authors and Contributors
Schuh, G�nther
Kuhn, Maximilian
Becker, Annika
Keuper, Alexander
Source
[Journal Article]
Application of natural language processing for systematic requirement management in model‐based systems engineering
In: INCOSE International Symposium, 31 (1), 806-815, 2021
[DOI: 10.1002/j.2334-5837.2021.00871.x] Authors and Contributors
Riesener, Michael
D�lle, Christian
Becker, Annika
Gorbatcheva, Sofia
Rebentisch, Eric
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Framework for an agile, databased development
In: Procedia CIRP, 100, 343-348, 2021 Authors and Contributors
Riesener, Michael
Kuhn, Maximilian
Lauf, Hendrik
Schuh, G�nther
Source
[Contribution to a conference proceedings, Journal Article]
Framework for an agile, databased development
In: Procedia CIRP, 100, 343-348, 2021 Authors and Contributors
Riesener, Michael
Kuhn, Maximilian
Lauf, Hendrik
Schuh, G�nther
Source
[Contribution to a conference proceedings]
The Impact Of Manufacturing Execution Systems On The Digital Transformation Of Production Systems : A Maturity Based Approach
In: [Conference on Production Systems and Logistics CPSL 2021 : Proceedings ], 446-456, 2021
[DOI: 10.15488/11258] Authors and Contributors
Fischer, Markus
Schuh, G�nther
Stich, Volker
Source
[Contribution to a conference proceedings]
System and process development for functionalization of electrical components by laser-based gold micro deposition
In: [Lasers in Manufacturing Conference 2021, LiM 2021, 2021-06-21 - 2021-06-24, Online], 11 Seiten, 2021 Authors and Contributors
Schmid, Tobias
Janssen, Henning
Brecher, Christian
Source
[Contribution to a book, Contribution to a conference proceedings]
Novel Maturity Model for Cybersecurity Evaluation in Industry 4.0
In: Advances in Cyber Security : Third International Conference, ACeS 2021, Penang, Malaysia, August 24-25, 2021, revised selected papers / Nibras Abdullah, Selvakumar Manickam, Mohammed Anbar (eds.), 198-210, 2021
[DOI: 10.1007/978-981-16-8059-5_12] Authors and Contributors
Kreppein, Alexander
Kies, Alexander
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Economically driven requirements for a hybrid-electric 19-passenger commuter aircraft
In: 10th EASN International Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens (10th EASN 2020), 2nd-5th September 2020, 8 Seiten, 2021
[DOI: 10.1088/1757-899X/1024/1/012079] Authors and Contributors
Schuh, G�nther
Spangenberg, Maximilian
Zhang, Qinyin
Source
[Contribution to a conference proceedings]
On the Definition of Development Objectives for Air Taxis Derived from a Holistic Stakeholder Analysis
In: Deutscher Luft- und Raumfahrtkongress 2021 : 31. August - 2. September, 2021 in Bremen und online. - Luft- und Raumfahrt : Visionen f�r eine Nachhaltige Zukunft, 1-12, 2021 Authors and Contributors
Schuh, G�nther
Spangenberg, Maximilian
Stuerken, Johann
Source
[Book, Report]
Agile Innovation: Gestaltungsfelder der agilen Produktentwicklung, 2021 Authors and Contributors
Schuh, G�nther
D�lle, Christian
Kreutzer, Ramon
Ays, Laura Johanna
Ebi, Mauel
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Time-driven Activity-based Costing Using Process Data Mining
In: 2021 IEEE Technology & Engineering Management Conference - Europe (TEMSCON-EUR) / IEEE; IEEE TEMS ; TEMSCON-EUR 2021 conference general co-chairs: Marina Dabić, Andy Chen, 2021
[DOI: 10.1109/TEMSCON-EUR52034.2021.9488654] Authors and Contributors
Riesener, Michael
D�lle, Christian
Menges, Alexander Dominic
Schuh, G�nther
Source
[Contribution to a conference proceedings, Journal Article]
Framework for an agile, databased development
In: Procedia CIRP, 100, 343-348, 2021
[DOI: 10.1016/j.procir.2021.05.084] Authors and Contributors
Riesener, Michael
Kuhn, Maximilian
Lauf, Hendrik (Corresponding author)
Schuh, G�nther
Source
[Contribution to a conference proceedings, Journal Article]
Investigation of the diameter error when turning thin walled workpieces
In: Procedia CIRP, 102, 343-348, 2021 Authors and Contributors
Bergs, Thomas
Knappe, Dominik (Corresponding author)
Husseini, K.
Pullen, T.
Schraknepper, Daniel
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Advanced calculation of the stress distribution in milling tools during cutting under consideration of residual stresses and tool wear
In: Procedia CIRP, 102, 19-24, 2021 Authors and Contributors
Schraknepper, Daniel (Corresponding author)
Peng, Bingxiao
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Methodology for integrated additive-subtractive process chain generation204
In: Procedia CIRP, 100, 199-204, 2021 Authors and Contributors
Wollbrink, Moritz (Corresponding author)
Dannen, Tammo
Arntz, Kristian
Pr�mmer, Marcel
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Tool wear progression of SiAlON ceramic end mills in five-axis high-feed rough machining of an Inconel 718 BLISK
In: Procedia CIRP, 101, 13-16, 2021 Authors and Contributors
Zimmermann, Richard (Corresponding author)
Welling, David
Venek, Tommy
Ganser, Philipp
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Investigation of cutting mechanisms in the machining of Ceramic Matrix Composites (CMCs)
In: Procedia CIRP, 101, 330-333, 2021 Authors and Contributors
Bergs, Thomas
Ganser, Philipp
Fruh, D.
Reisberg, Jannik (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Time- and Cost-Efficient Specification and Evaluation of Manufacturing Changes through Iterative Information Acquisition
In: Procedia CIRP, 104, 176-181, 2021 Authors and Contributors
Hermann, L. (Corresponding author)
Weber, A.
Beckers, Alexander
Barth, Sebastian
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Development of a voxelization tool for the calculation of vector-based workpiece representations
In: Procedia CIRP, 100, 7-12, 2021 Authors and Contributors
Bergs, Thomas
Henrichs, Oliver (Corresponding author)
Wilms, Marcel
Pr�mmer, Marcel
Arntz, Kristian
Source
[Contribution to a conference proceedings, Journal Article]
CFD simulation to optimize the internal coolant channels of an additively manufactured milling tool
In: Procedia CIRP, 102, 234-239, 2021
[DOI: 10.1016/j.procir.2021.09.040] Authors and Contributors
Zachert, Christoph (Corresponding author)
Liu, Hui
Lakner, Thomas
Schraknepper, Daniel
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Investigation of the diameter error when turning thin walled workpieces
In: Procedia CIRP, 102, 343-348, 2021
[DOI: 10.1016/j.procir.2021.09.059] Authors and Contributors
Bergs, Thomas
Knappe, Dominik (Corresponding author)
Husseini, K.
Pullen, T.
Schraknepper, Daniel
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Advanced calculation of the stress distribution in milling tools during cutting under consideration of residual stresses and tool wear
In: Procedia CIRP, 102, 19-24, 2021
[DOI: 10.1016/j.procir.2021.09.004] Authors and Contributors
Schraknepper, Daniel (Corresponding author)
Peng, Bingxiao
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Tool wear progression of SiAlON ceramic end mills in five-axis high-feed rough machining of an Inconel 718 BLISK
In: Procedia CIRP, 101, 13-16, 2021
[DOI: 10.1016/j.procir.2021.02.003] Authors and Contributors
Zimmermann, Richard (Corresponding author)
Welling, David
Venek, Tommy
Ganser, Philipp
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Methodology for integrated additive-subtractive process chain generation
In: Procedia CIRP, 100, 199-204, 2021
[DOI: 10.1016/j.procir.2021.05.055] Authors and Contributors
Wollbrink, Moritz (Corresponding author)
Dannen, Tammo
Arntz, Kristian
Pr�mmer, Marcel
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Investigation of cutting mechanisms in the machining of Ceramic Matrix Composites (CMCs)
In: Procedia CIRP, 101, 330-333, 2021
[DOI: 10.1016/j.procir.2020.11.015] Authors and Contributors
Bergs, Thomas
Ganser, Philipp
Fruh, D.
Reisberg, Jannik (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Development of a voxelization tool for the calculation of vector-based workpiece representations
In: Procedia CIRP, 100, 7-12, 2021
[DOI: 10.1016/j.procir.2021.05.022] Authors and Contributors
Bergs, Thomas
Henrichs, Oliver (Corresponding author)
Wilms, Marcel
Pr�mmer, Marcel
Arntz, Kristian
Source
[Contribution to a conference proceedings, Journal Article]
Time- and Cost-Efficient Specification and Evaluation of Manufacturing Changes through Iterative Information Acquisition
In: Procedia CIRP, 104, 176-181, 2021
[DOI: 10.1016/j.procir.2021.11.030] Authors and Contributors
Hermann, L. (Corresponding author)
Weber, A.
Beckers, Alexander
Barth, Sebastian
Bergs, Thomas
Source
[Contribution to a conference proceedings]
Introduction of a Highly Iterative Design Process for Air Taxis
In: [Deutscher Luft- und Raumfahrtkongress 2021, DLRK, 2021-08-31 - 2021-09-02, Bremen, Germany], 2021 Authors and Contributors
Schuh, G�nther
Spangenberg, Maximilian
Schreiber, Nick
Source
[Contribution to a book, Contribution to a conference proceedings]
Smart Resilience Services for Industrial Production
In: Automation 2021 : 22. Leitkongress der Mess- und Automatisierungstechnik : navigating towards resilient production : 29. und 30. Juni 2021 : digital, 621-636, 2021 Authors and Contributors
Janzen, Sabine
�ks�z, Nurten
Sporkmann, Jan
Schlappa, Martin
Gerhard, Jens
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Three-dimensional multi-physical modelling of the influence of the cutting fluid on the chip formation process
In: Procedia CIRP, 102, 216-221, 2021 Authors and Contributors
Liu, Hui
Peng, Bingxiao
Meurer, Markus Joachim
Schraknepper, Daniel
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Three Dimensional Numerical Modeling of Face Turning Using the Coupled-Eulerian-Lagrangian Formulation102
In: Procedia CIRP, 102, 162-167, 2021 Authors and Contributors
Hardt, Marvin Yannick
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Spatially Resolved Tool Wear Prediction in Finish Milling
In: Procedia CIRP, 104, 85-90, 2021 Authors and Contributors
Holst, Carsten (Corresponding author)
K�nigs, Michael
Garcia, Eduardo Maia
Ganser, Philipp
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
An Improved Model for Contour Damage Compensation in 3D Waterjet Machining
In: Procedia CIRP, 102, 387-392, 2021 Authors and Contributors
Dadgar, M.
Schreiner, T. (Corresponding author)
Sch�ler, M.
Herrig, Tim
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings]
Knowledge-Based Adaptation of Product and Process Design in Blisk Manufacturing
In: Proceedings of ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition : June 7-11, 2021, virtual, online. - Volume 7: Industrial and cogeneration, manufacturing materials and metallurgy, GT2021-59562, V007T17A012, 1-9, 2021
[DOI: 10.1115/GT2021-59562] Authors and Contributors
Ganser, Philipp (Corresponding author)
Landwehr, Markus
Schiller, Sven
Vahl, Christopher
Mayer, Sebastian
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Three Dimensional Numerical Modeling of Face Turning Using the Coupled-Eulerian-Lagrangian Formulation
In: Procedia CIRP, 102, 162-167, 2021
[DOI: 10.1016/j.procir.2021.09.028] Authors and Contributors
Hardt, Marvin Yannick (Corresponding author)
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Three-dimensional multi-physical modelling of the influence of the cutting fluid on the chip formation process
In: Procedia CIRP, 102, 216-221, 2021
[DOI: 10.1016/j.procir.2021.09.037] Authors and Contributors
Liu, Hui (Corresponding author)
Peng, Bingxiao
Meurer, Markus Joachim
Schraknepper, Daniel
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Spatially Resolved Tool Wear Prediction in Finish Milling
In: Procedia CIRP, 104, 85-90, 2021
[DOI: 10.1016/j.procir.2021.11.015] Authors and Contributors
Holst, Carsten (Corresponding author)
K�nigs, Michael
Garcia, Eduardo Maia
Ganser, Philipp
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings]
Global Reward Design for Cooperative Agents to Achieve Flexible Production Control under Real-time Constraints
In: Proceedings of the 23rd International Conference on Enterprise Information Systems. - Volume 1, 515-526, 2021
[DOI: 10.5220/0010455805150526] Authors and Contributors
Pol, Sebastian
Baer, Schirin
Turner, Danielle
Samsonov, Vladimir
Meisen, Tobias (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Metrological Support of Medical Drillings at the Lateral Skull Base : Refinement of a drill with integrated temperature sensor technology
In: Current Directions in Biomedical Engineering, 7 (1), 171-175, 2021
[DOI: 10.1515/cdbme-2021-1037] Authors and Contributors
Knott, Anna-Lena (Corresponding author)
Kristin, Julia
Schipper, J�rg
Klenzner, Thomas
Prinzen, Tom
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Wear monitoring in fine blanking processes using feature based analysis of acoustic emission signals
In: Procedia CIRP, 104, 164-169, 2021 Authors and Contributors
Unterberg, Martin Christian
Voigts, Herman Otto
Weiser, Ingo Felix
Feuerhack, Andreas
Trauth, Daniel
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Highly Iterative Planning of Mixed-Model Assembly Lines
In: Production at the leading edge of technology : proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 / Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg editors, 680-688, 2020
[DOI: 10.1007/978-3-662-62138-7_68] Authors and Contributors
Maetschke, Jan Niklas (Corresponding author)
Fr�nken, Bastian
Sauermann, Frederick Christian
G�tzlaff, Andreas
Schuh, G�nther
Source
[Contribution to a book, Contribution to a conference proceedings]
Definition of Process Performance Indicators for the Application of Process Mining in End-to-End Order Processing Processes
In: Production at the leading edge of technology : proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 / Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg editors, 670-679, 2020
[DOI: 10.1007/978-3-662-62138-7_67] Authors and Contributors
Schmitz, Seth (Corresponding author)
Renneberg, Florian
Cremer, Sven Alexander
G�tzlaff, Andreas (Corresponding author)
Schuh, G�nther
Source
[Contribution to a book, Contribution to a conference proceedings]
Requirements for an Event-Based Visualization of Product Complexity
In: Production at the leading edge of technology : proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 / Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg editors, 707-716, 2020
[DOI: 10.1007/978-3-662-62138-7_71] Authors and Contributors
Koch, Jan Felix
D�lle, Christian (Corresponding author)
Riesener, Michael
Schuh, G�nther
Source
[Contribution to a book, Contribution to a conference proceedings]
Combining Process Mining and Machine Learning for Lead Time Prediction in High Variance Processes
In: Production at the leading edge of technology : proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 / Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg editors, 528-537, 2020
[DOI: 10.1007/978-3-662-62138-7_53] Authors and Contributors
Welsing, Martin (Corresponding author)
Maetschke, Jan Niklas
Thomas, Katharina
G�tzlaff, Andreas
Schuh, G�nther
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Data-based improvement of engineering change impact analyses in manufacturing
In: Procedia CIRP, 99, 580-585, 2021
[DOI: 10.1016/j.procir.2021.03.079] Authors and Contributors
Schuh, Guenther
Guetzlaff, Andreas
Sauermann, Frederick
Krug, Marius Paul (Corresponding author)
Source
[Journal Article]
Strategische Entwicklung von Standortrollen
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 116 (12), 877-881, 2021
[DOI: 10.1515/zwf-2021-0202] Authors and Contributors
Schuh, G�nther
G�tzlaff, Andreas
Schlosser, Tino Xaver
Ays, Julian Leander
Rodemann, Niklas
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Function-Oriented Flank Roughness: Influence of Fine and Polish Generating Gear Grinding
In: [The Brazilian Gear Conference 2021, 2021-09-09 - 2021-09-11, S�o Jos� dos Campos, Brazil], IV-1-IV-19, 2021 Authors and Contributors
Lang, Martin (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
W�lzfestigkeit erodierter Oberfl�chen im Zwei-Scheiben-Zahnradanalogieversuch
In: Tribologie und Schmierungstechnik, 68 (3/4), 38-44, 2021
[DOI: 10.24053/TuS-2021-0018] Authors and Contributors
Mevissen, Dieter Johannes Wilheln (Corresponding author)
K�pper, Ugur
Brimmers, Jens
Bergs, Thomas
Source
[Journal Article]
Industrielle Datenprozesse f�r KI-Technologien: Handlungsempfehlungen am Beispiel von Robotik-Applikationen
In: Industrie 4.0 Management, 37 (6), 37-41, 2021 Authors and Contributors
Brecher, Christian
Belke, Manuel (Corresponding author)
Trinh, Minh Phuong
Gr�ndel, Lukas
Petrovic, Oliver
Source
[Contribution to a book, Contribution to a conference proceedings]
Messunsicherheitsbestimmung bei der Datenfusion lokaler und globaler Messtechnik zur Sektionsmontage im Flugzeugbau
In: Messunsicherheit praxisgerecht bestimmen - Pr�fprozesse in der industriellen Praxis 2021 : 10. VDI-Fachtagung : der Weg zum sicheren Messen und Pr�fen : Erfurt, 10. und 11. November 2021 / VDI VDE Mess- und Automatisierungstechnik, 47-62, 2021
[DOI: 10.51202/9783181023907-47] Authors and Contributors
Huber, Meike (Corresponding author)
Nicksch, Christoph
Schmitt, Robert H.
Source
[Journal Article]
Statistical Learning of Frequent Distractor Locations in Visual Search Involves Regional Signal Suppression in Early Visual Cortex
In: Cerebral cortex, 1-16, 2021
[DOI: 10.1093/cercor/bhab377] Authors and Contributors
Zhang, Bei (Corresponding author)
Weidner, Ralph
Allenmark, Fredrik
Bertleff, Sabine
Fink, Gereon R.
et al.
Source
[Contribution to a book]
Individual process chains in toolmaking through data and model-based forecasts
In: Internet of Production - Turning Data into Sustainability : AWK'21, 80-103, 2021 Authors and Contributors
Bergs, Thomas
Wilms, Marcel
Henrichs, Oliver
Weber, Sebastian
Stepien, Georg
et al.
Source
[Abstract, Contribution to a book]
Individuelle Prozessketten im Werkzeugbau durch daten- und modellbasierte Prognosen
In: Internet of Production - Turning Data into Sustainability : AWK'21, 81, 2021 Authors and Contributors
Bergs, Thomas
Wilms, Marcel
Henrichs, Oliver
Weber, Sebastian
Stepien, Georg
et al.
Source
[Contribution to a book]
Enabling Sustainable Production with the Digital Twin
In: Internet of Production - Turning Data into Sustainability : AWK'21, 106-175, 2021 Authors and Contributors
Bergs, Thomas
Gierlings, Sascha
Augspurger, Thorsten
Ganser, Philipp
Barth, Sebastian
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Nachhaltige Produktion mit dem Digitalen Zwilling
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Editors: Aachen Machine Tool Colloquium AWK ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; further contributors: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 2021 Authors and Contributors
Bergs, Thomas
Gierlings, Sascha
Augspurger, Thorsten
Ganser, Philipp
Barth, Sebastian
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Identification of Superior Improvement Trajectories for Production Lines via Simulation-Based Optimization with Reinforcement Learning
In: Advances in Production Management Systems : Artificial Intelligence for Sustainable and Resilient Production Systems : IFIP WG 5.7 International Conference, APMS 2021, Nantes, France, September 5-9, 2021, Proceedings, Part V / Editors: Alexandre Dolgui, Alain Bernard, David Lemoine, Gregor von Cieminski, David Romero, 405-413, 2021
[DOI: 10.1007/978-3-030-85914-5_43] Authors and Contributors
Schuh, G�nther
G�tzlaff, Andreas
Schmidhuber, Matthias
Maetschke, Jan Niklas (Corresponding author)
Barkhausen, Max
et al.
Source
[Journal Article]
Development of a virtual sensor for the comparison of heat partitions in milling under cryogenic cooling lubrication and high-pressure cutting fluid supply
In: CIRP journal of manufacturing science and technology : CIRP-JMST, 35, 118-131, 2021
[DOI: 10.1016/j.cirpj.2021.05.004] Authors and Contributors
Augspurger, Thorsten (Corresponding author)
Koch, Matthias
Lakner, Thomas
De Bartolomeis, Andrea
Shokrani, Alborz
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Towards a Method to Design Production Systems for Fixtureless Production with Component-integrated Fixture Features in Automotive Body Shops
In: [2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : [Proceedings], 13-16 Dec. 2021], 721-728, 2021
[DOI: 10.1109/IEEM50564.2021.9672883] Authors and Contributors
Fiedler, Falko (Corresponding author)
Bergweiler, Georg
Burggraf, Peter
Source
[Contribution to a book, Contribution to a conference proceedings]
Influence of Heat Treatment and Densification on the Load Capacity of Sintered Gears
In: Euro PM2020 Proceedings: Developing the Powder Metallurgy Future ,18 to 22 October 2021, Virtual Congress, 6 Seiten, 2021 Authors and Contributors
Scholzen, Philipp Alexander (Corresponding author)
Rajaei, Ali (Corresponding author)
Brimmers, Jens
Hallstedt, Bengt
Bergs, Thomas
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Creation of an expert system for design validation in BIM-based factory design through automatic checking of semantic information
In: Procedia CIRP, 99, 3-8, 2021
[DOI: 10.1016/j.procir.2021.03.012] Authors and Contributors
Burggr�f, Peter
Dannapfel, Matthias (Corresponding author)
Ebade Esfahani, Matthias Aref (Corresponding author)
Scheidler, Florian
Source
[Contribution to a book, Contribution to a conference proceedings]
Management Framework for the Highly Iterative and Integrated Product and Production Process Development (HIP 3 D)
In: 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 750-754, 2021
[DOI: 10.1109/IEEM50564.2021.9672983] Authors and Contributors
Schuh, G.
Guetzlaff, A.
Schmitz, Seth
Wlecke, Shari (Corresponding author)
Hermann, Annkristin
Source
[Contribution to a book, Contribution to a conference proceedings]
Process Chain Concept for the Automated Design of Polymer Additively Manufactured Forming Tools
In: 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 663-667, 2021
[DOI: 10.1109/IEEM50564.2021.9672831] Authors and Contributors
Schuh, G.
Bergweiler, Georg (Corresponding author)
Fiedler, Falko
Passgang, Arne
Bickendorf, P. (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Transfer of Industrial Product-service System Specific Risk Effects to Value Network Partners - Concept for an Integrated Risk Assessment and Distribution
In: 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 547-551, 2021
[DOI: 10.1109/IEEM50564.2021.9672822] Authors and Contributors
Riesener, Michael (Corresponding author)
Kuhn, M.
Kress, Julian (Corresponding author)
Schild, Lukas
Schuh, G.
Source
[Contribution to a book, Contribution to a conference proceedings]
Methodology for Organizing Product-service System Provision in Corporate Value Networks
In: 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : [Proceedings] - IEEE, 2021. - ISBN 978-1-6654-3771-4 - doi:10.1109/IEEM50564.2021.9672914, 542-546, 2021
[DOI: 10.1109/IEEM50564.2021.9672914] Authors and Contributors
Riesener, M.
Kuhn, M.
Kress, Julian
Tonnis, Julian (Corresponding author)
Schuh, G.
Source
[Contribution to a book, Contribution to a conference proceedings]
Concept for Enhancing the Contribution of Product Development to Organizational Resilience of Manufacturing Companies
In: 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 1303-1307, 2021
[DOI: 10.1109/IEEM50564.2021.9672979] Authors and Contributors
Riesener, M.
Kuhn, M.
Tittel, J. (Corresponding author)
Schuh, G.
Source
[Contribution to a book, Contribution to a conference proceedings]
Event Log-based Weaknesses Detection in Business Processes
In: 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 734-738, 2021
[DOI: 10.1109/IEEM50564.2021.9672975] Authors and Contributors
Schuh, G.
Guetzlaff, A.
Schmitz, Seth
Schopen, Marco (Corresponding author)
Broehl, Florian
Source
[Contribution to a book, Contribution to a conference proceedings]
Identification of Fields of Action for the Realization of a Sustainable Corporate Management
In: [2021 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM, 2021-12-13 - 2021-12-16, Singapore, Singapore], 498-502, 2021
[DOI: 10.1109/IEEM50564.2021.9673012] Authors and Contributors
Riesener, M.
Kuhn, M.
Schloesser, Sebastian
Bossmann, C. (Corresponding author)
Schuh, G.
Source
[Contribution to a book, Contribution to a conference proceedings]
Methodology for Structuring and Bundling Product-Service Systems
In: DS 112: Proceedings of the 23rd International DSM Conference (DSM 2021), Montr�al, Canada, October, 12 - 14, 2021 - The Design Society, 2021. - ISBN - doi:10.35199/dsm2021.7, 60-69, 2021
[DOI: 10.35199/dsm2021.7] Authors and Contributors
Riesener, Michael
D�lle, Christian
Kre�, Julian Maximilian (Corresponding author)
Bo�mann, Carsten
Schuh, G�nther
Source
[Contribution to a book]
"ReLIFE": Gesch�ftsmodelle zum datenbasierten Remanufacturing: Adaptives Remanufacturing zur Lebenszyklusoptimierung vernetzter Investitionsg�ter
In: Monetarisierung von technischen Daten : Innovationen aus Industrie und Forschung / Daniel Trauth, Thomas Bergs, Wolfgang Prinz (Hrsg.), 559-573, 2021
[DOI: 10.1007/978-3-662-62915-4_28] Authors and Contributors
Burggr�f, Peter
Dannapfel, Matthias (Corresponding author)
Wagner, Johannes
Heinbach, Benjamin
F�hlisch, Nils (Corresponding author)
et al.
Source
[Abstract, Book]
Concept for the usage data-based advancement of minimum viable products in the context of the internet of production
In: Proceedings of the 18th International Open and User Innovation Conference : Book of Abstracts : RWTH Aachen University, Aachen, Germany, June 21-22, 2021 / Edited by Frank Piller, Patrick Pollok, and Kathleen Diener, OUI 2020+1 Conference Co-Chairs ; Organized by The Institute for Technology and Innovation Management, RWTH Aachen University, The Institute for Management Cybernetics IFU e.V., an RWTH affiliated Institute, 53, 2021
[DOI: 10.2139/ssrn.3870410] Authors and Contributors
Riesener, M.
D�lle, C.
Becker, Annika
Perau, Stefan (Corresponding author)
Schuh, G.
Source
[Contribution to a book, Contribution to a conference proceedings]
Potential Analysis Of Flexible Small Series Production Of Spare Parts By Direct Polymer Additive Tooling
In: Proceedings of the Conference on Production Systems and Logistics : CPSL 2021, 288-298, 2021
[DOI: 10.15488/11244] Authors and Contributors
Schuh, G�nther
Bergweiler, Georg
Fiedler, Falko
Neumann, Daniel
Heetfeld, Lennart (Corresponding author)
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Decision Approach for the Design and Sensor Integration of an LPBF Manufactured Gripper End Effector
In: Procedia CIRP, 2021 (104), 128-133, 2021
[DOI: 10.1016/j.procir.2021.11.022] Authors and Contributors
Schuh, G.
Bergweiler, G.
Z�pfel, Martin
Salian, Anurag
Bickendorf, Philipp (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Adaptivity and adaptability as design parameters of cognitive worker assistance for enabling agile assembly systems
In: Procedia CIRP, 9/ 2021 (97), 224-229, 2021
[DOI: 10.1016/j.procir.2020.05.229] Authors and Contributors
Burggr�f, Peter
Dannapfel, Matthias
Adlon, Tobias (Corresponding author)
Kasalo, Mateo
Source
[Journal Article]
Die Modullandkarte des Aachener Fabrikplanungsvorgehens : Ganzheitliche, informatorische Vernetzung als Grundlage spezifischer Projektkonfigurationen
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 116 (12), 866-871, 2021
[DOI: 10.1515/zwf-2021-0222] Authors and Contributors
Burggr�f, Peter
Adlon, Tobias
Schupp, Steffen (Corresponding author)
F�lling, Carsten
Dannapfel, Matthias
Source
[Contribution to a conference proceedings, Journal Article]
Effects of Digital Twin Simulation Modelling on a Flexible and Fixtureless Production Concept in Automotive Body Shops
In: Procedia CIRP, 2021 (9) (104), 768-773, 2021
[DOI: 10.1016/j.procir.2021.11.129] Authors and Contributors
Schuh, G�nther
Bergweiler, Georg
Chougule, Mayur Vasant
Fiedler, Falko (Corresponding author)
Source
[Contribution to a conference proceedings]
Werkstoffspezifische Entwicklung der Werkzeuggeometrie f�r das Tauchfr�sen von bleifreien Cu-Zn-Werkstoffen
In: Kupfersymposium 2021 : Werkstofftagung vom 24. - 25. November 2021 : Tagungsbeitr�ge, 2021 Authors and Contributors
Baier, Stefan
Schraknepper, Daniel
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings]
Tool geometry analysis for plunge milling of lead-free CuZn-alloys
In: ESAFORM 2021 : 24th International Conference on Material Forming, 3793/1-3793/7, 2021
[DOI: 10.25518/esaform21.3793] Authors and Contributors
Baier, Stefan
Kokozinski, Lukas
Schraknepper, Daniel
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Modelling the Geometrical Accuracy for Different Part Geometries and Process Parameters when Broaching Fir-Tree Slots in Turbine Disks
In: Procedia CIRP, 102, 31-36, 2021 Authors and Contributors
Seelbach, Tobias Markus (Corresponding author)
Beja, L.
Schraknepper, D.
Bergs, Thomas
Source
[Contribution to a book]
As-a-Service Modelle f�r die Fertigungstechnik : Am Beispiel des Feinschneidens
In: Monetarisierung von technischen Daten : Innovationen aus Industrie und Forschung / Daniel Trauth, Thomas Bergs, Wolfgang Prinz (Hrsg.), 449-470, 2021
[DOI: 10.1007/978-3-662-62915-4_24] Authors and Contributors
Stanke, Joachim (Corresponding author)
Trauth, Daniel
Niemietz, Philipp
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings]
Potential and Challenges of Tool Condition Monitoring in Gear Hobbing
In: [The Brazilian Gear Conference ITA-WZL 2021, 2021-11-09 - 2021-11-10, S�o Jos� dos Campos, Brazil], 11-18, 2021 Authors and Contributors
Hendricks, Steffen (Corresponding author)
de Oliveira Teixeira, Patricia
Brimmers, Jens
Bergs, Thomas
Source
[Journal Article]
Analysis of the Operational Behavior of a High-Speed Planetary Gear Stage for Electric Heavy Duty Trucks in Multi-Body Simulation
In: Power Transmission Engineering, 15 (2), 46-54, 2021 Authors and Contributors
Westphal, Christian Michael (Corresponding author)
Brimmers, Jens
Brecher, Christian
Source
[Journal Article]
Ansatz zur Umsetzung des Internet of Production in produzierenden Unternehmen
In: Industrie 4.0: Business Lösungen 2021, 2021 (2), 14-18, 2021 Authors and Contributors
Riesener, M.
D�lle, C.
Perau, Stefan (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Risk Management in Factory Planning - A Literature Review
In: Procedia CIRP, 10 (104), 1191-1196, 2021
[DOI: 10.1016/j.procir.2021.11.200] Authors and Contributors
Burggr�f, Peter
Adlon, Tobias
Schupp, Steffen
Salzwedel, Jan (Corresponding author)
Source
[Journal Article]
Characteristic Value-Based Process Design of Gear Hobbing Processes with Radial Infeed
In: Gear technology, 38 (7), 42-53, 2021 Authors and Contributors
Bergs, Thomas
L�penhaus, C.
Tro�, Nico (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Creating Transparency on Product Variety Through Data-driven Similarity Analysis
In: 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : [Proceedings] - IEEE, 2021. - ISBN 978-1-6654-3771-4 - doi:10.1109/IEEM50564.2021.9672806, 1077-1081, 2021
[DOI: 10.1109/IEEM50564.2021.9672806] Authors and Contributors
Schuh, G.
Guetzlaff, A.
Schmidhuber, Matthias
Krug, Marius Paul (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Modelling the Geometrical Accuracy for Different Part Geometries and Process Parameters when Broaching Fir-Tree Slots in Turbine Disks
In: Procedia CIRP, 102, 31-36, 2021
[DOI: 10.1016/j.procir.2021.09.006] Authors and Contributors
Seelbach, Tobias Markus (Corresponding author)
Beja, L.
Schraknepper, D.
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings]
Monetization of manufacturing data to increase ecological efficiency
In: Internet of Production - Turning Data into Sustainability : AWK'21, 369-394, 2021 Authors and Contributors
Trauth, Daniel
Bergs, Thomas
G�lpen, Christian
Kornely, Mia Johanna
Maa�, Wolfgang
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Monetarisierung von Fertigungsdaten zur Steigerung der �kologischen Effizienz
In: Internet of Production - Turning Data into Sustainability : AWK'21, 409-436, 2021 Authors and Contributors
Trauth, Daniel
Bergs, Thomas
G�lpen, Christian
Kornely, Mia Johanna
Maa�, Wolfgang
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Towards a data-driven assistance system for operating segment erectors in tunnel boring machines
In: 2021 14th International Symposium on Computational Intelligence and Design (ISCID) : Proceedings. - 11-12 December 2021 Hangzhou, China, 263-267, 2021
[DOI: 10.1109/ISCID52796.2021.00068] Authors and Contributors
Zhou, Hans Aoyang (Corresponding author)
Gannouni, Aymen
Gentz, Christian Robert Maria
Trondle, Johannes
Neumann, Stephan
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Towards an Artificial Intelligence based Approach for Manufacturing Resilience
In: Automation 2021 : 22. Leitkongress der Mess- und Automatisierungstechnik : navigating towards resilient production : 29. und 30. Juni 2021 : digital, 649-664, 2021
[DOI: 10.51202/9783181023921-649] Authors and Contributors
�ks�z, Nurten
Bouschery, Sebastian
Schlappa, Martin
Sporkmann, Jan
Unterberg, Martin Christian
Source
[Journal Article]
Mobilit�tsentwicklung im M�nsterland. Bedarfsgerechte Gestaltung der Anbindungen des l�ndlichen Raums im B�rgerlabor mobiles M�nsterland
In: Internationales Verkehrswesen, 73 (3), 76-9, 2021 Authors and Contributors
Bertleff, Sabine
Klee, Philipp-Armand
Lender, Benjamin
Bickendorf, Philipp
Ladwig, Stefan
Source
[Contribution to a conference proceedings, Journal Article]
How Distributed Ledger Technologies affect business models of manufacturing companies
In: Procedia CIRP, 104, 152-157, 2021 Authors and Contributors
Mayer, Johannes (Corresponding author)
Niemietz, Philipp
Trauth, Daniel
Bergs, Thomas
Source
[Dissertation / PhD Thesis]
Entwicklung einer adaptierbaren Produktreifegradsystematik zur Absicherung der Produktqualit�t in fr�hen Entwicklungsphasen, 2021 Authors and Contributors
Klauke, Alexandra
Source
[Contribution to a conference proceedings, Journal Article]
How Distributed Ledger Technologies affect business models of manufacturing companies
In: Procedia CIRP, 104, 152-157, 2021
[DOI: 10.1016/j.procir.2021.11.026] Authors and Contributors
Mayer, Johannes (Corresponding author)
Niemietz, Philipp
Trauth, Daniel
Bergs, Thomas
Source
[Contribution to a book]
Die Rolle des Menschen im Kontext souver�ner Datenr�ume
In: Arbeitswelt und KI 2030 : Herausforderungen und Strategien f�r die Arbeit von morgen / Inka Knappertsbusch, Kai Gondlach (Hrsg.), 231-239, 2021
[DOI: 10.1007/978-3-658-35779-5_24] Authors and Contributors
Mayer, Johannes (Corresponding author)
Bergs, Thomas
Sander, Stefan
Trauth, Daniel
Source
[Contribution to a conference proceedings, Journal Article]
Automotive hybrid design production and effective end machining by novel abrasive waterjet technique
In: Procedia CIRP, 101, 374-377, 2021 Authors and Contributors
Sch�ler, Manuel (Corresponding author)
Heidrich, Daniel
Herrig, Tim
Fang, Xiangfan
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings]
Definition of the Operating Parameters of a High Speed Back-to-Back Test Rig to Examine the Tooth Root Load Capacity
In: [The Brazilian Gear Conference 2021 ITA WZL, 2021-11-09 - 2021-11-10, S�o Jos� dos Campos, Brazil], 2021 Authors and Contributors
Ahmad, Mubarik (Corresponding author)
Trippe, Moritz Johannes (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Automotive hybrid design production and effective end machining by novel abrasive waterjet technique
In: Procedia CIRP, 101, 374-377, 2021
[DOI: 10.1016/j.procir.2021.02.039] Authors and Contributors
Sch�ler, Manuel (Corresponding author)
Heidrich, Daniel
Herrig, Tim
Fang, Xiangfan
Bergs, Thomas
Source
[Contribution to a book]
Development of a Model to Evaluate the Potential of 5G Technology for Latency-critical Applications in Production
In: 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : [Proceedings], 739-744, 2021
[DOI: 10.1109/IEEM50564.2021.9673074] Authors and Contributors
Kiesel, Raphael (Corresponding author)
Boehm, F.
Pennekamp, Jan
Schmitt, Robert H.
Source
[Contribution to a conference proceedings]
Investigations on the Impact of Additively Manufactured Coolant Channels and Outlet Nozzles on Free Jet and Jet Forces in High-Pressure Cutting Fluid Supply
In: Proceedings of the Machining Innovations Conference for Aerospace Industry (MIC) 2021, 41-49, 2021
[DOI: 10.2139/ssrn.3936402] Authors and Contributors
Kelliger, Tobias (Corresponding author)
Liu, Hui
Schraknepper, Daniel
Bergs, Thomas
Source
[Journal Article]
Nachbearbeitung additiv gefertigter Fr�swerkzeuge
In: wt Werkstattstechnik online, 111 (11/12), 818-823, 2021
[DOI: 10.37544/1436-4980-2021-11-12-48] Authors and Contributors
Kelliger, Tobias (Corresponding author)
Zachert, Christoph
Schraknepper, Daniel
Bergs, Thomas
Source
[Journal Article]
Industrie 4.0 als Chance gegen den Fachkr�ftemangel. Eine Betrachtung f�r den deutschen Mittelstand
In: Industrie 4.0 Management, 37 (1), 12-15, 2021 Authors and Contributors
Schuh, G�nther
Scholz, Patrick
Scheuer, Thomas
Latz, Tim
Source
[Journal Article]
CBN-Kornverschlei�modellierung/Numerical modeling of CBN grain wear during single grain engagement - CBN-grain wear modelling
In: wt Werkstattstechnik online, 111 (6), 414-418, 2021
[DOI: 10.37544/1436-4980-2021-06-58] Authors and Contributors
Bredthauer, Marc
Mattfeld, Patrick-Marcel
Barth, Sebastian
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Wear monitoring in fine blanking processes using feature based analysis of acoustic emission signals
In: Procedia CIRP, 104, 164-169, 2021
[DOI: 10.1016/j.procir.2021.11.028] Authors and Contributors
Unterberg, Martin Christian (Corresponding author)
Voigts, Herman Otto
Weiser, Ingo Felix
Feuerhack, Andreas
Trauth, Daniel
et al.
Source
[Journal Article]
Feinschneiden von hochfesten Stahlg�ten
In: wt Werkstattstechnik online, 111 (10), 698-703, 2021
[DOI: 10.37544/1436-4980-2021-10-44] Authors and Contributors
Voigts, Herman Otto
Weiser, Ingo Felix
Herrig, Tim
Bergs, Thomas
Source
[Book]
Datenbasierte Gesch�ftsmodelle - Chancen und Herausforderungen am Beispiel der Batteriezellfertigung, 2021
[DOI: 10.24406/IPT-N-644065] Authors and Contributors
Schuh, G�nther
Patzwald, Marc
Latz, Tim
Ismail, Abdus Samad
Holst, Lennard
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Increasing Agility: A Tangible XR for Rapid Prototype Development, Design Exploration and Usability Assessment
In: Advances in manufacturing, production management and process control : proceedings of the AHFE 2021 Virtual Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, July 25-29, 2021, USA / Stefan Trzcielinski, Beata Mrugalska, Waldemar Karwowski, Emilio Rossi, Massimo Di Nicolantonio, editors, 85-91, 2021
[DOI: 10.1007/978-3-030-80462-6_11] Authors and Contributors
Meyer, Nils Ronald (Corresponding author)
Preutenborbeck, Michael
Usai, Marcel
Briele, Kristof Rene
Witzel, Andr�
et al.
Source
[Preprint]
Human Action Nodes for Behavior Trees, 2021 Authors and Contributors
Behery, Mohamed (Corresponding author)
Trinh, Minh (Corresponding author)
Lakemeyer, Gerhard (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Development of measuring systems for contact force and relative velocity in robot-guided centrifugal finishing
In: Procedia CIRP, 104, 14-19, 2021 Authors and Contributors
Ohlert, Marius (Corresponding author)
Schriever, Tim
Prinz, Sebastian
Barth, Sebastian
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings]
Algorithm-Based Optimization of Gear Mesh Efficiency in Stepped Planetary Gear Stages for Electric Vehicles
In: Fall Technical Meeting AGMA 2021, November 1-3, 2021, 136-151, 2021 Authors and Contributors
Westphal, Christian Michael (Corresponding author)
Brimmers, Jens
Brecher, Christian
Source
[Journal Article]
Auslegung einer elektrischen Antriebsachse f�r einen schweren Lkw
In: ATZheavy duty, 14 (2), 20-25, 2021
[DOI: 10.1007/s35746-021-0423-5] Authors and Contributors
K�ller, Sven
Uerlich, Roland
Westphal, Christian Michael
Franck, Marius
Source
[Journal Article]
Design of an Electric Drive Axle for a Heavy Truck
In: ATZ heavyduty worldwide, 14 (2), 20-25, 2021
[DOI: 10.1007/s41321-021-0420-8] Authors and Contributors
K�ller, Sven
Uerlich, Roland
Westphal, Christian Michael
Franck, Marius
Source
[Journal Article]
Simulazione multibody di trasmissioni epicicloidali per autocarri pesanti
In: Organi di trasmissione, 2021 (6), 30-40, 2021 Authors and Contributors
Westphal, Christian Michael (Corresponding author)
Brimmers, Jens
Brecher, Christian
Source
[Journal Article]
Investigation of the Potential of Using Surrogate Models in the Gear Design Process
In: Gear technology, 2021 (Nov/Dez), 68-74, 2021 Authors and Contributors
Brimmers, Jens
Willecke, Marius (Corresponding author)
L�penhaus, Christoph
Brecher, Christian
Source
[Contribution to a book, Contribution to a conference proceedings]
Design and Simulation of a Back to Back Test Rig for Ultra High Cycle Fatigue Testing of Gears Under Fully Reversed Load
In: Fall Technical Meeting AGMA 2021, 1.11.2021 to 3.11.2021, Chicago/ USA, 21FTN11 , 20 p., 2021 Authors and Contributors
L�venich, Johannes Peter (Corresponding author)
Trippe, Moritz Johannes
Malinowski, Oscar
Brecher, Christian
Brimmers, Jens
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Deep Reinforcement Learning for Robotic Control in High-Dexterity Assembly Tasks : A Reward Curriculum Approach
In: [2021 Fifth IEEE International Conference on Robotic Computing, IRC, 2021-11-15 - 2021-11-17, Taichung, Taiwan], 35-42, 2021
[DOI: 10.1109/IRC52146.2021.00012] Authors and Contributors
Leyendecker, Lars (Corresponding author)
Schmitz, Markus
Zhou, Hans Aoyang
Samsonov, Vladimir
Rittstieg, Marius
et al.
Source
[Contribution to a conference proceedings, Journal Article]
CFD simulation to optimize the internal coolant channels of an additively manufactured milling tool
In: Procedia CIRP, 102, 234-239, 2021 Authors and Contributors
Zachert, Christoph (Corresponding author)
Liu, Hui
Lakner, Thomas
Schraknepper, Daniel
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Development of measuring systems for contact force and relative velocity in robot-guided centrifugal finishing
In: Procedia CIRP, 104, 14-19, 2021
[DOI: 10.1016/j.procir.2021.11.006] Authors and Contributors
Ohlert, Marius (Corresponding author)
Schriever, Tim
Prinz, Sebastian
Barth, Sebastian
Bergs, Thomas
Source
[Book, Dissertation / PhD Thesis]
Selbstoptimierendes Haptikpr�fsystem
In: Ergebnisse aus der Produktionstechnik 34/2021, 2021 Authors and Contributors
Frank, Daniel Sebastian
Source
[Abstract, Contribution to a conference proceedings]
�JointPromise�: Concept of a multi-step, automated platform for precision manufacturing of joint implants
In: [TERMIS 6th World Congress 2021 : Book of Abstracts], #1857, 1 Seite, 2021 Authors and Contributors
Krieger, Judith
Snowball, Stan
Luyte, Frank P.
Schmitt, Robert H.
Source
[Contribution to a conference proceedings, Journal Article]
In-situ Evaluation of Surface Integrity Modifications by means of Barkhausen Noise Measurement
In: Procedia CIRP, 102, 465-470, 2021 Authors and Contributors
Shimosaka, K.
Bergs, Thomas
Schraknepper, D.
M�nstermann, Sebastian
Meurer, Markus Joachim
Source
[Contribution to a conference proceedings, Journal Article]
Prediction of the depth of dynamically recrystallized microstructure during hard turning of AISI 4140
In: Procedia CIRP, 101, 214-217, 2021 Authors and Contributors
Tekkaya, Berk
Meurer, Markus Joachim
D�lz, Michael
M�nstermann, Sebastian
Source
[Contribution to a book, Contribution to a conference proceedings]
Detecting Out-Of-Control Sensor Signals in Sheet Metal Forming using In-Network Computing
In: 2021 IEEE 30th International Symposium on Industrial Electronics (ISIE), 20-23 June 2021, 6 Seiten, 2021
[DOI: 10.1109/ISIE45552.2021.9576221] Authors and Contributors
Kunze, Ike Sebastian (Corresponding author)
Niemietz, Philipp
Tirpitz, Liam
Glebke, Ren�
Trauth, Daniel
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Prediction of the depth of dynamically recrystallized microstructure during hard turning of AISI 4140
In: Procedia CIRP, 101, 214-217, 2021
[DOI: 10.1016/j.procir.2021.03.129] Authors and Contributors
Tekkaya, Berk (Corresponding author)
Meurer, Markus Joachim
D�lz, Michael
M�nstermann, Sebastian
Source
[Contribution to a conference proceedings, Journal Article]
In-situ Evaluation of Surface Integrity Modifications by means of Barkhausen Noise Measurement
In: Procedia CIRP, 102, 465-470, 2021
[DOI: 10.1016/j.procir.2021.09.079] Authors and Contributors
Shimosaka, K. (Corresponding author)
Bergs, Thomas
Schraknepper, D.
M�nstermann, Sebastian
Meurer, Markus Joachim
Source
[Journal Article]
Statistical testing for sufficient control chart performances during monitoring of grouped processes
In: Quality and reliability engineering international, 37 (6), 2555-2567, 2021
[DOI: 10.1002/qre.2875] Authors and Contributors
Kostyszyn, Kevin Nikolai (Corresponding author)
Brandst�tter, Tobias Claus
Vollmer, Thomas
Schmitt, Robert H.
Source
[Journal Article]
Smarte Einsatzplanung und Schulung zur Qualit�tssteigerung : Kompetenzgerechte Personaleinsatzplanung und arbeitsgebundene Schulung als Schl�ssel zur Qualit�tssteigerung in komplexen Produktionsprozessen
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 116 (12), 945-950, 2021
[DOI: 10.1515/zwf-2021-0213] Authors and Contributors
Motz, Maximilian
M�hle, Janina
Lossie, Karl
Ast, Jonas
Rochow, Niklas E.
et al.
Source
[Contribution to a conference proceedings, Journal Article]
An Ecosystem for Digital Shadows in Manufacturing
In: Procedia CIRP, 104, 833-838, 2021 Authors and Contributors
Brecher, Christian
Dalibor, Manuela
Rumpe, Bernhard
Schilling, Katrin Laura
Wortmann, Andreas
Source
[Contribution to a conference proceedings, Journal Article]
An Ecosystem for Digital Shadows in Manufacturing
In: Procedia CIRP, 104, 833-838, 2021
[DOI: 10.1016/j.procir.2021.11.140] Authors and Contributors
Brecher, Christian
Dalibor, Manuela
Rumpe, Bernhard
Schilling, Katrin Laura (Corresponding author)
Wortmann, Andreas
Source
[Contribution to a book, Contribution to a conference proceedings]
State Estimation and Model-Predictive Control for Multi-Robot Handling and Tracking of AGV Motions using iGPS
In: [2021 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2021, 2021-09-27 - 2021-10-01, online], 1038-1045, 2021
[DOI: 10.1109/IROS51168.2021.9636116] Authors and Contributors
Storm, Christoph (Corresponding author)
Hose, Henrik (Corresponding author)
Schmitt, Robert H. (Corresponding author)
Source
[Journal Article]
Online capability-based resource allocation for on-site construction operations utilizing digital twin models
In: Construction robotics, 5 (3/4), 211-226, 2021
[DOI: 10.1007/s41693-022-00065-4] Authors and Contributors
M�nker, S�ren (Corresponding author)
Wildemann, Peter R.
G�ppert, Mirko Robin Amon
Brell-Cokcan, Sigrid
Schmitt, Robert H.
Source
[Journal Article]
AI in Collaborative Robotics
In: Innovatie nu (4), 15-20, 2021 Authors and Contributors
Nicksch, Christoph
Leyendecker, Lars
Ma, Guocai
Li, Fei
Cao, Zhihong
et al.
Source
[Book, Dissertation / PhD Thesis]
Implementierung von Subskriptionsmodellen im Maschinen- und Anlagenbau
In: Ergebnisse aus der Produktionstechnik 32/2021, 2021 Authors and Contributors
Ebi, Manuel
Source
[Contribution to a conference proceedings, Journal Article]
Towards predictive quality in production by applying a flexible process-independent meta-model
In: Procedia CIRP, 104, 1251-1256, 2021 Authors and Contributors
Liang, Junjie (Corresponding author)
Pelzer, Lukas
M�ller, Kai Bruno
Cramer, Simon Tristan
Greb, Christoph
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Towards predictive quality in production by applying a flexible process-independent meta-model
In: Procedia CIRP, 104, 1251-1256, 2021
[DOI: 10.1016/j.procir.2021.11.210] Authors and Contributors
Liang, Junjie (Corresponding author)
Pelzer, Lukas
M�ller, Kai Bruno
Cramer, Simon Tristan
Greb, Christoph
et al.
Source
[Report]
Fertigungsmesstechnik in der digitalen Produktion, 2021 Authors and Contributors
Bodenbenner, Matthias Stefan
B�sser, Friedlhelm
Dessel, Sascha
Martin, Andr�
Montavon, Benjamin Leendert
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Quantification of Influence of 5G Technology Implementation on Process Performance in Production
In: Procedia CIRP, 104, 104-109, 2021 Authors and Contributors
Kiesel, Raphael (Corresponding author)
Stichling, Kirstin
Hemmers, Philipp
Vollmer, Thomas
Schmitt, Robert H.
Source
[Contribution to a conference proceedings, Journal Article]
Methodology for iterative system modeling in agile product development
In: Procedia CIRP, 100, 439-444, 2021 Authors and Contributors
Riesener, Michael
D�lle, Christian
Perau, Stefan (Corresponding author)
Lossie, Philipp
Schuh, G�nther
Source
[Journal Article]
Erweitertes Berechnungsmodell f�r Kugelgewindetriebe : Ber�cksichtigung des Spindelsteigungsfehlers in der Simulation und Auslegung von Kugelgewindetrieben
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 116 (12), 917-921, 2021
[DOI: 10.1515/zwf-2021-0159] Authors and Contributors
Brecher, Christian
Biernat, Benedikt Markus Hubert (Corresponding author)
Vorwerk-Handing, Lennard
Neus, Stephan
Source
[Contribution to a book, Contribution to a conference proceedings]
Noise Optimization without Loss of Load-Carrying Capacity?
In: [The Brazilian Gear Conferene 2021 ITA - WZL, 2021-11-09 - 2021-11-10, Sao Jos� dos Campos, Brazil], 2021 Authors and Contributors
Kasten, Marcel-Mich�l (Corresponding author)
Ahmad, Mubarik
Brecher, Christian
Source
[Journal Article]
Market Intelligence f�hrt zu besserem Kundenverst�ndnis : Variantenvielfalt muss sich am Kundennutzen orientieren
In: Industrie-Anzeiger, 144 (17), 22-23, 2021 Authors and Contributors
Schuh, G�nther
Kuhn, Maximilian
Lender, Benjamin Nils Johannes (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Methodology for iterative system modeling in agile product development
In: Procedia CIRP, 100, 439-444, 2021
[DOI: 10.1016/j.procir.2021.05.101] Authors and Contributors
Riesener, Michael
D�lle, Christian
Perau, Stefan (Corresponding author)
Lossie, Philipp
Schuh, G�nther
Source
[Journal Article]
Virtuelle Klimatisierung
In: wt Werkstattstechnik online, 111 (11/12), 887-892, 2021
[DOI: 10.37544/1436-4980-2021-11-12-117] Authors and Contributors
Emonts, Dominik
Sanders, Mark Pascal
Dahlem, Jan Philipp
Bodenbenner, Matthias Stefan
Montavon, Benjamin Leendert
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Quantification of Influence of 5G Technology Implementation on Process Performance in Production
In: Procedia CIRP, 104, 104-109, 2021
[DOI: 10.1016/j.procir.2021.11.018] Authors and Contributors
Kiesel, Raphael (Corresponding author)
Stichling, Kirstin
Hemmers, Philipp
Vollmer, Thomas
Schmitt, Robert H.
Source
[Contribution to a book]
Zukunftsf�hige Produktionssysteme durch Predictive Quality
In: Masing Handbuch Qualit�tsmanagement / Tilo Pfeifer, Robert Schmitt, 799-828, 2021
[DOI: 10.3139/9783446466210.035] Authors and Contributors
Pfeifer, Tilo
Schmitt, Robert H.
Buschmann, Daniel
Ellerich, Max
Huebser, Louis
et al.
Source
[Book, Dissertation / PhD Thesis]
Systematische Bewertung von �nderungsanfragen in der Produktion
In: Schriftenreihe Rationalisierung 180, 2021 Authors and Contributors
K�lschbach, Andreas
Source
[Contribution to a book, Contribution to a conference proceedings]
Functional and Ecological Traceability of Process Chains : a data- and model-based approach
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Editors: Aachen Machine Tool Colloquium AWK ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; further contributors: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 237-258, 2021 Authors and Contributors
Bergs, Thomas
Brimmers, Jens
Kappmeyer, Gregor
L�penhaus, C.
Scheffler, Florian
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Funktionale und �kologische R�ckverfolgbarkeit von Prozessketten : Ein daten- und modellbasierter Ansatz
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Herausgeber: AWK Aachener Werkzeugmaschinen-Kolloquium ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; weitere Mitwirkende: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 263-287, 2021 Authors and Contributors
Bergs, Thomas
Brimmers, Jens
Kappmeyer, Gregor
L�penhaus, C.
Scheffler, Florian
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Predictive Quality - Data Analytics for increasing corporate sustainability
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Editors: Aachen Machine Tool Colloquium AWK ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; further contributors: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 259-286, 2021 Authors and Contributors
Schmitt, Robert H.
Kurzhals, Reiner
Kiesel, Raphael
Nilgen, Guido
Schlegel, Peter (Corresponding author)
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Predictive Quality - Data Analytics zur Steigerung unternehmerischer Nachhaltigkeit
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Herausgeber: AWK Aachener Werkzeugmaschinen-Kolloquium ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; weitere Mitwirkende: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 289-318, 2021 Authors and Contributors
Schmitt, Robert H.
Kurzhals, Reiner
Kiesel, Raphael
Nilgen, Guido
Schlegel, Peter (Corresponding author)
et al.
Source
[Contribution to a conference proceedings]
Industrial Innovation & Employability : Sustainable Skilling of Smart Experts
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Herausgeber: AWK Aachener Werkzeugmaschinen-Kolloquium ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; weitere Mitwirkende: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 379-408, 2021 Authors and Contributors
Metzmacher, Amelie Isabel
Hellebrandt, Thomas Sven
Adam, Tobias
Heine, Ina
Bergholz, Markus
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Sustainable business models for maschine tools
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Editors: Aachen Machine Tool Colloquium AWK ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; further contributors: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 395-420, 2021 Authors and Contributors
Brecher, Christian
Butz, Felix
Kaever, Michael
Nagel, Erik
Neus, Stephan
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Nachhaltige Gesch�ftsmodelle f�r Werkzeugmaschinen
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Herausgeber: AWK Aachener Werkzeugmaschinen-Kolloquium ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; weitere Mitwirkende: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 437-466, 2021 Authors and Contributors
Brecher, Christian
Butz, Felix
Kaever, Michael
Nagel, Erik
Neus, Stephan
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Data Science in Production
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Editors: Aachen Machine Tool Colloquium AWK ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; further contributors: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 202-236, 2021 Authors and Contributors
Brecher, Christian
Biernat, Benedikt Markus Hubert
Fey, Marcel
Kehne, Sebastian
Lohrmann, Vincent
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Data Science in Production
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Herausgeber: AWK Aachener Werkzeugmaschinen-Kolloquium ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; weitere Mitwirkende: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 225-261, 2021 Authors and Contributors
Brecher, Christian
Biernat, Benedikt Markus Hubert
Fey, Marcel
Kehne, Sebastian
Lohrmann, Vincent
et al.
Source
[Book, Proceedings]
Internet of Production - Turning Data into Sustainability : AWK'21, 2021
[DOI: 10.24406/ipt-n-640534] Authors and Contributors
Bergs, Thomas (Editor)
Brecher, Christian (Editor)
Schmitt, Robert H. (Editor)
Schuh, G�nther (Editor)
Krause, Susanne (Contributor)
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Future Assembly - Automation beyond Mass Production
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Herausgeber: AWK Aachener Werkzeugmaschinen-Kolloquium ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; weitere Mitwirkende: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 195-218, 2021 Authors and Contributors
Schmitt, Robert H.
Eickhorst, Dirk
Fl�ter, Felix
Freeman, Philip L.
G�ppert, Mirko Robin Amon
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Industrial Innovation & Employability - Sustainable Skilling of Smart Experts
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Editors: Aachen Machine Tool Colloquium AWK ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; further contributors: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 336-368, 2021 Authors and Contributors
Metzmacher, Amelie Isabel
Hellebrandt, Thomas Sven
Adam, Tobias
Heine, Ina
Bergholz, Markus
et al.
Source
[Contribution to a book]
Qualit�tsmanagement f�r die Erbringung von Dienstleistungen und Neuerung von Gesch�ftsmodellen
In: Masing Handbuch Qualit�tsmanagement / Tilo Pfeifer, Robert Schmitt, 883-901, 2021
[DOI: 10.3139/9783446466210.038] Authors and Contributors
Baskaya, Sait
Adam, Tobias
Schmitt, Robert H.
Source
[Contribution to a book]
Qualit�tsmanagement bei der Entwicklung von Dienstleistungen und Gesch�ftsmodellen
In: Masing Handbuch Qualit�tsmanagement / Tilo Pfeifer, Robert Schmitt, 534-547, 2021
[DOI: 10.3139/9783446466210.023] Authors and Contributors
Adam, Tobias
Baskaya, Sait
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Investigating the Applicability of In-Network Computing to Industrial Scenarios
In: 2021 4th IEEE International Conference on Industrial Cyber-Physical Systems (ICPS) : online, 10-13 May, 2021 / organized by: University of Victoria ; sponsored by: the Institute of Electrical and Electronics Engineers (IEEE), IEEE Industrial Electronics Society (IES), 334-340, 2021
[DOI: 10.1109/ICPS49255.2021.9468247] Authors and Contributors
Kunze, Ike Sebastian (Corresponding author)
Glebke, Rene
Scheiper, Jan
Bodenbenner, Matthias Stefan
Schmitt, Robert H.
et al.
Source
[Book, Dissertation / PhD Thesis]
Gestaltung agiler Entwicklungsnetzwerke
In: Ergebnisse aus der Produktionstechnik 29/2021, 2021 Authors and Contributors
Kuhn, Maximilian
Source
[Journal Article]
Tiefziehen mit additiv gefertigten Werkzeugen
In: wt Werkstattstechnik online, 111 (11/12), 812-817, 2021
[DOI: 10.37544/1436-4980-2021-11-12-42] Authors and Contributors
L�ffler, Bernd Wolfgang (Corresponding author)
Schuh, G�nther
Bergweiler, Georg
Fiedler, Falko
Lackner, Nikolaus
Source
[Book, Dissertation / PhD Thesis]
Ressourcenschonende additive Fertigung von Schwei�vorrichtungen im Karosseriebau
In: Ergebnisse aus der Produktionstechnik 28/2021, 2021 Authors and Contributors
Lichtenth�ler, Kolja
Source
[Journal Article]
New Bearing Steel for High-Speed Applications
In: MM Science journal, 2021 (6), 5334-5339, 2021
[DOI: 10.17973/MMSJ.2021_12_2021129] Authors and Contributors
Brecher, Christian
Neus, Stephan
G�rtner, Marcus Holger (Corresponding author)
Catana, Leonardo
Greco, Feliciano
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Adaptive Remanufacturing : Methodology towards an intelligent maintenance strategy for production resources
In: Procedia CIRP, 98, 330-335, 2021 Authors and Contributors
Burggr�f, Peter
Adlon, Tobias
M�ller, Katharina Maria
F�hlisch, Nils
Dackweiler, Jonas
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Collaboration is not Evil : A Systematic Look at Security Research for Industrial Use
In: [Learning from Authoritative Security Experiment Results (LASER) 2020, 8 December 2020, Virtual ], [1]-16, 2021
[DOI: 10.14722/laser-acsac.2020.23088] Authors and Contributors
Pennekamp, Jan (Corresponding author)
Buchholz, Erik (Corresponding author)
Dahlmanns, Markus (Corresponding author)
Kunze, Ike Sebastian (Corresponding author)
Braun, Stefan (Corresponding author)
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Ontology-based data management for adaptable safety functions in cyber-physical production systems
In: Procedia CIRP, 104, 194-199, 2021 Authors and Contributors
Brecher, Christian
Buchsbaum, Melanie Sarah Katharina (Corresponding author)
Ziegler, Frances
Storms, Simon
Source
[Contribution to a conference proceedings, Journal Article]
An Approach for Knowledge-Driven, Flexible Process Generation
In: Procedia CIRP, 104, 1239-1244, 2021 Authors and Contributors
Fimmers, Christian (Corresponding author)
Storms, Simon
Herfs, Werner
Brecher, Christian
Source
[Contribution to a conference proceedings, Journal Article]
Virtual Single Flank Testing : Applications for Industry 4.0
In: Procedia CIRP, 104, 476-481, 2021 Authors and Contributors
Willecke, Marius (Corresponding author)
Brimmers, Jens
Brecher, Christian
Source
[Contribution to a conference proceedings, Journal Article]
FlexARobOS : A modern approach for flexible automation of machine tools
In: Procedia CIRP, 104, 506-511, 2021 Authors and Contributors
Blanke, Philipp (Corresponding author)
Storms, Simon
Brecher, Christian
K�nigs, Michael
Source
[Contribution to a conference proceedings, Journal Article]
Development of a method for applying free kinematics for gear profile grinding
In: Procedia CIRP, 104, 1373-1377, 2021 Authors and Contributors
Jan�en, Christopher Maria (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Separating Entangled Workpieces in Random Bin Picking using Deep Reinforcement Learning
In: Procedia CIRP, 104, 881-886, 2021 Authors and Contributors
Moosmann, Marius
Kulig, Marco
Spenrath, Felix
M�nnig, Manuel
Roggendorf, Simon
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Separating Entangled Workpieces in Random Bin Picking using Deep Reinforcement Learning
In: Procedia CIRP, 2021 (104), 881-886, 2021
[DOI: 10.1016/j.procir.2021.11.148] Authors and Contributors
Moosmann, Marius (Corresponding author)
Kulig, Marco
Spenrath, Felix
M�nnig, Manuel
Roggendorf, Simon
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Development of a method for applying free kinematics for gear profile grinding
In: Procedia CIRP (104), 1373-1377, 2021
[DOI: 10.1016/j.procir.2021.11.231] Authors and Contributors
Jan�en, Christopher Maria (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings]
Funktionale und �kologische R�ckverfolgbarkeit von Prozessketten : Ein daten- und modellbasierter Ansatz
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Herausgeber: AWK Aachener Werkzeugmaschinen-Kolloquium ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; weitere Mitwirkende: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 259-283, 2021 Authors and Contributors
Bergs, Thomas
Brimmers, Jens
Kappmeyer, Gregor
L�penhaus, C.
Scheffler, Florian
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Flexible creation of a 3D-Map in an unknown environment by a robot
In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 8 Seiten, 2021
[DOI: 10.1109/ETFA45728.2021.9613215] Authors and Contributors
Blanke, Philipp (Corresponding author)
Sharma, Shubham
Storms, Simon
Brecher, Christian
Source
[Contribution to a conference proceedings, Journal Article]
FlexARobOS : A modern approach for flexible automation of machine tools
In: Procedia CIRP (104), 506-511, 2021
[DOI: 10.1016/j.procir.2021.11.085] Authors and Contributors
Blanke, Philipp (Corresponding author)
Storms, Simon
Brecher, Christian
K�nigs, Michael
Source
[Contribution to a conference proceedings, Journal Article]
Virtual Single Flank Testing : Applications for Industry 4.0
In: Procedia CIRP (104), 476-481, 2021
[DOI: 10.1016/j.procir.2021.11.080] Authors and Contributors
Willecke, Marius (Corresponding author)
Brimmers, Jens
Brecher, Christian
Source
[Contribution to a conference proceedings, Journal Article]
An Approach for Knowledge-Driven, Flexible Process Generation
In: Procedia CIRP (104), 1239-1244, 2021
[DOI: 10.1016/j.procir.2021.11.208] Authors and Contributors
Fimmers, Christian (Corresponding author)
Storms, Simon
Herfs, Werner
Brecher, Christian
Source
[Contribution to a conference proceedings, Journal Article]
Ontology-based data management for adaptable safety functions in cyber-physical production systems
In: Procedia CIRP (104), 194-199, 2021
[DOI: 10.1016/j.procir.2021.11.033] Authors and Contributors
Brecher, Christian
Buchsbaum, Melanie Sarah Katharina (Corresponding author)
Ziegler, Frances
Storms, Simon
Source
[Journal Article]
Berechnung der statischen axialen Steifigkeit von Planentenrollengewindetrieben
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 116 (5), 327-331, 2021
[DOI: 10.1515/zwf-2021-0050] Authors and Contributors
Brecher, Christian
Frenken, Thomas
Neus, Stephan (Corresponding author)
Source
[Journal Article]
Erfassung von Werkzeugverschlei� mittels MEMS-Sensorik
In: Konstruktion : Zeitschrift f�r Produktentwicklung und Ingenieur-Werkstoffe, 73 (11/12), 41-44, 2021
[DOI: 10.37544/0720-5953-2021-11-12-41] Authors and Contributors
Brecher, Christian
Neus, Stephan
Christoffers, Daniel (Corresponding author)
Source
[Journal Article]
Echtzeitf�higkeit in der schiffbaulichen Fertigung
In: wt Werkstattstechnik online, 111 (4), 217-221, 2021
[DOI: 10.37544/1436-4980-2021-04-39] Authors and Contributors
Burggr�f, Peter
Adlon, Tobias
M�ller, Katharina Maria
Vierschilling, Sebastian Patrick
Minderjahn, Richard
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Adaptive Remanufacturing : Methodology towards an intelligent maintenance strategy for production resources
In: Procedia CIRP, 2021 (98), 330-335, 2021
[DOI: 10.1016/j.procir.2021.01.112] Authors and Contributors
Burggr�f, Peter
Adlon, Tobias
M�ller, Katharina Maria
F�hlisch, Nils
Dackweiler, Jonas
et al.
Source
[Book, Dissertation / PhD Thesis]
Gestaltung agiler Produktionsnetzwerke
In: Ergebnisse aus der Produktionstechnik 33/2021, 2021 Authors and Contributors
Ays, Julian Leander
Source
[Book]
Erfolgreich Additive Manufacturing nutzen im Werkzeugbau, 2021 Authors and Contributors
Boos, Wolfgang
Arntz, Kristian
Kelzenberg, Christoph Maximilian Bernd
Pr�mmer, Marcel
Ebbecke, Christoph Wilhelm
et al.
Source
[Journal Article]
Systematischer Leitfaden zur Potenzial-Analyse von Additive Manufacturing (AM) im Werkzeugbau
In: Der Stahlformenbauer : Fachzeitschrift f�r: Formenbau, Werkzeugbau, Modellbau, Prototypen- und Musterbau, Funkenerosionstechnik, 38 (2), 30-34, 2021 Authors and Contributors
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Pr�mmer, Marcel
Boshof, Julian
Frey, Christoph
et al.
Source
[Journal Article]
Systematic guideline for analyzing the potential of additive manufacturing in toolmaking
In: The mold & die journal, 9 (1), 12-15, 2021 Authors and Contributors
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Pr�mmer, Marcel
Boshof, Julian
Frey, Christoph
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Efficient modeling of material dissolution in electrochemical machining
In: Proceedings in applied mathematics and mechanics : PAMM, 21 (1), e202100042, 2021
[DOI: 10.1002/pamm.202100042] Authors and Contributors
van der Velden, Tim (Corresponding author)
Rommes, Bob
Klink, Andreas
Reese, Stefanie
Waimann, Johanna
Source
[Book, Proceedings]
Internet of Production - Turning Data into Sustainability : AWK'21, 2021
[DOI: 10.24406/ipt-n-640533] Authors and Contributors
Bergs, Thomas (Editor)
Brecher, Christian (Editor)
Schmitt, Robert H. (Editor)
Schuh, G�nther (Editor)
Krause, Susanne (Contributor)
et al.
Source
[Website]
Increasing efficiency with network of textile process chains, 2021 Authors and Contributors
Rath, Michael
Gannouni, Aymen
Kreutzer, Dennis
Thiel, Jan
Granich, Dominik
et al.
Source
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
The Concept of Digital Twin and Digital Shadow in Manufacturing
In: Procedia CIRP, 101, 81-84, 2021 Authors and Contributors
Bergs, Thomas
Gierlings, Sascha
Auerbach, Thomas
Klink, Andreas
Schraknepper, Daniel
et al.
Source
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Understanding the Influence of Chemical and Thermal Loads on the Productivity for Processing 42CrMo4 Steel and Titanium via Laser-Induced Thermochemical Machining
In: Procedia CIRP, 101, 202-205, 2021 Authors and Contributors
Eckert, S. (Corresponding author)
Vollertsen, F.
Schupp, Alexander
Zander, Brita Daniela
Rommes, Bob
et al.
Source
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Experimental investigation of abrasive properties in waterjet machining
In: Procedia CIRP, 101, 210-213, 2021 Authors and Contributors
Sch�ler, M. (Corresponding author)
Dadgar, M.
Herrig, Tim
Klink, Andreas
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Process Performance of High Energy Wire EDM
In: Procedia CIRP, 101, 230-233, 2021 Authors and Contributors
K�pper, Ugur (Corresponding author)
Herrig, Tim
Welling, D.
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Concept for the experimental and numerical study of fluid-structure interaction and gas transport in Precise Electrochemical Machiningc
In: Procedia CIRP, 102, 204-209, 2021 Authors and Contributors
Rommes, Bob (Corresponding author)
Lauwers, Daniel
Herrig, Tim
Meinke, Matthias
Schr�der, Wolfgang
et al.
Source
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Modelling of Energy Distribution in SEDM on the Basis of Gas Bubble Observations
In: Procedia CIRP, 102, 293-298, 2021 Authors and Contributors
Petersen, Timm (Corresponding author)
Schneider, Sebastian
Klink, Andreas
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Investigation on residual stress induced by multiple EDM discharges
In: Procedia CIRP, 102, 482-487, 2021 Authors and Contributors
Schneider, Sebastian (Corresponding author)
Vorspohl, Julian
Frerichs, Friedhelm
Klink, Andreas
Meinke, Matthias
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Filling the Semantics Gap in Industrial Communication: Middleware+ for an Internet of Production
In: IFAC-PapersOnLine, 54 (1), 432-437, 2021
[DOI: 10.1016/j.ifacol.2021.08.049] Authors and Contributors
Kiesel, Raphael (Corresponding author)
Weiss, Arno (Corresponding author)
Schmitt, Robert H. (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Study of the multiphase electrolyte flow during electrochemical machining (ECM) using dynamic similarity
In: 17th International Symposium on Electrochemical Machining Technology INSECT 2021 : proceedings : November 25-26, 2021, KU Leuven, Department of Mechanical Engineering / editors: Prof. Dr. ir. Dominiek Reynaerts, Dr. ir. Krishna Kumar Saxena, 2021 Authors and Contributors
Tchoupe, Elio
Heidemanns, Lukas Franz
Herrig, Tim
Klink, Andreas
Lauwers, daniel
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Experimental study on ECM of Fe-25Al-1Zr and its influence on high temperature oxidation resistance
In: 17th International Symposium on Electrochemical Machining Technology INSECT 2021 : proceedings : November 25-26, 2021, KU Leuven, Department of Mechanical Engineering / editors: Prof. Dr. ir. Dominiek Reynaerts, Dr. ir. Krishna Kumar Saxena, 2021 Authors and Contributors
Sous, Florian
P�tz, Ren� Daniel
Schupp, Alexander
Heidemanns, Lukas Franz
Herrig, Tim
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Wire electrical discharge machinability and load-bearing capacity of ATZ-WC composite ceramics
In: ESAFORM 2021 : 24th International Conference on Material Forming, 4032, 1-9, 2021
[DOI: 10.25518/esaform21.4032] Authors and Contributors
Olivier, Marcel Christoph (Corresponding author)
He�, Dennis Raphael
Gommeringer, Andrea
Kern, Frank
Herrig, Tim
et al.
Source
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Empirical Modeling of Abrasive Waterjet Process for Controlled Depth Machining of Dense Segmented Ceramic Thermal Barrier Coatings
In: Procedia CIRP, 102, 355-360, 2021 Authors and Contributors
Borrmann, J. P.
Dadgar, M.
D�ring, J.-E.
Herrig, Tim
Bergs, Thomas
Source
[Journal Article]
Tribologisches Einsatzverhalten von PVD-Festschmierstoffsystemen im fluidfreien W�lzkontakt
In: Tribologie und Schmierungstechnik, 68 (3/4), 71-78, 2021 Authors and Contributors
Sklenak, Sebastian
Brimmers, Jens
Brecher, Christian
Lenz, Bastian
Mehner, Andreas
Source
[Contribution to a conference proceedings, Journal Article]
Benchmarking of Data Preprocessing Methods for Machine Learning-Applications in Production
In: Procedia CIRP, 104, 50-55, 2021 Authors and Contributors
Frye, Maik
Mohren, Johannes
Schmitt, Robert H.
Source
[Contribution to a conference proceedings, Journal Article]
Influence of heat treatment on the residual stress-related machining distortion of Ti-6Al-4V alloy monolithic parts
In: Procedia CIRP, 104, 1328-1333, 2021 Authors and Contributors
Landwehr, M. (Corresponding author)
Ohler, Fabian Georg
Behnken, H.
Holling, H.
Sambathkumar, R.
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Development of handling system concepts for additive process chains with Laser Powder Bed Fusion (L-PBF)
In: Procedia CIRP, 104, 1173-1178, 2021 Authors and Contributors
Horstkotte, Rainer (Corresponding author)
Heinrich, Florian
Pr�mmer, Marcel
Arntz, Kristian
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Mixed Reality Supported Learning for Industrial on-the-job Training
In: SSRN eLibrary, 2021
[DOI: 10.2139/ssrn.3864189] Authors and Contributors
Sautter, Bj�rn (Corresponding author)
Daling, Lea M. (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Benchmarking of Data Preprocessing Methods for Machine Learning-Applications in Production
In: Procedia CIRP, 104, 50-55, 2021
[DOI: 10.1016/j.procir.2021.11.009] Authors and Contributors
Frye, Maik (Corresponding author)
Mohren, Johannes
Schmitt, Robert H.
Source
[Contribution to a conference proceedings, Journal Article]
Human-centered performance management in manual assembly
In: Procedia CIRP, 97, 418-422, 2021 Authors and Contributors
Ohlig, Jasmin
Hellebrandt, Thomas Sven
Poetters, Patrick
Heine, Ina
Schmitt, Robert H.
et al.
Source
[Journal Article]
Pipeline for ontology-based modeling and automated deployment of digital twins for planning and control of manufacturing systems
In: Journal of intelligent manufacturing, 2021
[DOI: 10.1007/s10845-021-01860-6] Authors and Contributors
G�ppert, Mirko Robin Amon (Corresponding author)
Grahn, Lea
Rachner, Jonas Sebastian
Grunert, Dennis
Hort, Simon
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Development of handling system concepts for additive process chains with Laser Powder Bed Fusion (L-PBF)
In: Procedia CIRP, 104, 1173-1178, 2021
[DOI: 10.1016/j.procir.2021.11.197] Authors and Contributors
Horstkotte, Rainer (Corresponding author)
Heinrich, Florian
Pr�mmer, Marcel
Arntz, Kristian
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Human-centered performance management in manual assembly
In: Procedia CIRP, 97, 418-422, 2021
[DOI: 10.1016/j.procir.2020.05.261] Authors and Contributors
Ohlig, Jasmin (Corresponding author)
Hellebrandt, Thomas Sven
Poetters, Patrick
Heine, Ina
Schmitt, Robert H.
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Influence of heat treatment on the residual stress-related machining distortion of Ti-6Al-4V alloy monolithic parts
In: Procedia CIRP, 104, 1328-1333, 2021
[DOI: 10.1016/j.procir.2021.11.223] Authors and Contributors
Landwehr, M. (Corresponding author)
Ohler, Fabian Georg
Behnken, H.
Holling, H.
Sambathkumar, R.
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Empirical Modeling of Abrasive Waterjet Process for Controlled Depth Machining of Dense Segmented Ceramic Thermal Barrier Coatings
In: Procedia CIRP, 102, 355-360, 2021
[DOI: 10.1016/j.procir.2021.09.061] Authors and Contributors
Borrmann, J. P. (Corresponding author)
Dadgar, M.
D�ring, J.-E.
Herrig, Tim
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
An Improved Model for Contour Damage Compensation in 3D Waterjet Machining
In: Procedia CIRP, 102, 387-392, 2021
[DOI: 10.1016/j.procir.2021.09.066] Authors and Contributors
Dadgar, M.
Schreiner, T. (Corresponding author)
Sch�ler, M.
Herrig, Tim
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Production rescheduling through product quality prediction
In: Procedia manufacturing, 54, 142-147, 2021
[DOI: 10.1016/j.promfg.2021.07.022] Authors and Contributors
Frye, Maik (Corresponding author)
Gyulai, D�vid
Bergmann, J�lia
Schmitt, Robert H.
Source
[Journal Article]
Industry 4.0 Readiness: a new framework for maturity evaluation based on a bibliometric study of scientific articles from 2001 to 2020
In: Dyna : revista de la Facultad de Minas, 88 (218), 101-109, 2021
[DOI: 10.15446/dyna.v88n218.92543] Authors and Contributors
da Silva, I. A.
Barbalho, S. C. M.
Adam, Tobias
Heine, Ina
Schmitt, Robert H.
Source
[Journal Article]
FAIR sensor services : Towards sustainable sensor data management
In: Measurement : sensors, 18, 100206, 2021
[DOI: 10.1016/j.measen.2021.100206] Authors and Contributors
Bodenbenner, Matthias Stefan (Corresponding author)
Montavon, Benjamin Leendert
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Investigation of a new inductive double belt press for impregnating glass fibre fabrics with recycled polyethylene terephthalate
In: [SAMPE EUROPE Conference and Exhibition 2021 Baden/Z�rich - Switzerland], 2021 Authors and Contributors
Wigger, Philipp Karl Moritz
Emonts, Michael Gustav
Fischer, Kai
Brecher, Christian
Source
[Contribution to a book, Contribution to a conference proceedings]
Korrelationsbasierte Erkennung von Montagereihenfolgen mittels 6 DoF-Zeitreihendaten zur Prozessdiagrammerstellung
In: Qualit�tsmanagement in den 20er Jahren - Trends und Perspektiven : Bericht zur GQW-Jahrestagung 2020 in Koblenz / Bert Leyendecker Hrsg., 120-145, 2021
[DOI: 10.1007/978-3-662-63243-7_7] Authors and Contributors
Huebser, Louis (Corresponding author)
Thamm, Sascha
Hellebrandt, Thomas Sven
Heine, Ina
Schmitt, Robert H.
Source
[Journal Article]
Augmented Intelligence : Mensch trifft K�nstliche Intelligenz : Intelligentes Zusammenwirken von Mensch und KI f�r bessere Entscheidungen und Handlungen in der Produktion
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 116 (6), 433-437, 2021
[DOI: 10.1515/zwf-2021-0104] Authors and Contributors
Hellebrandt, Thomas Sven (Corresponding author)
Huebser, Louis
Adam, Tobias
Heine, Ina
Schmitt, Robert H.
Source
[Contribution to a book]
Qualit�tsgerechte Organisationsstrukturen
In: Masing Handbuch Qualit�tsmanagement, 39-53, 2021
[DOI: 10.3139/9783446466210.003] Authors and Contributors
Hellebrandt, Thomas Sven
Heine, Ina
Schmitt, Robert H.
Pfeifer, Tilo
Source
[Contribution to a book, Contribution to a conference proceedings]
Future Assembly - Automation Beyond Mass Production
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Editors: Aachen Machine Tool Colloquium AWK ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; further contributors: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 176-199, 2021 Authors and Contributors
Schmitt, Robert H.
Eickhorst, Dirk
Fl�ter, Felix
Freeman, Philip L.
G�ppert, Mirko Robin Amon
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Montage der Zukunft - Automatisierung jenseits der Massenproduktion
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Herausgeber: AWK Aachener Werkzeugmaschinen-Kolloquium ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; weitere Mitwirkende: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 195-221, 2021 Authors and Contributors
Schmitt, Robert H.
Eickhorst, Dirk
Fl�ter, Felix
Freeman, Philip L.
G�ppert, Mirko Robin Amon
et al.
Source
[Contribution to a book]
Nachhaltige Produktion durch Predictive Quality und Sustainability Analytics entlang der Lieferkette : Monetarisierungseffekte bei einem unternehmens�bergreifenden Datenaustausch
In: Monetarisierung von technischen Daten: Innovationen aus Industrie und Forschung / Daniel Trauth, Thomas Bergs, Wolfgang Prinz (Hrsg.), 521-536, 2021
[DOI: 10.1007/978-3-662-62915-4_26] Authors and Contributors
Schmitt, Robert H. (Corresponding author)
Buschmann, Daniel (Corresponding author)
Briele, Kristof Rene
Schlegel, Peter
Ellerich, Max
Source
[Contribution to a book, Contribution to a conference proceedings]
Predictive Quality - Data Analytics zur Steigerung unternehmerischer Nachhaltigkeit
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Herausgeber: AWK Aachener Werkzeugmaschinen-Kolloquium ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; weitere Mitwirkende: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 285-314, 2021 Authors and Contributors
Schmitt, Robert H.
Kurzhals, Reiner
Kiesel, Raphael
Nilgen, Guido
Schlegel, Peter (Corresponding author)
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Manufacturing Technologies for Fir Tree Slots : A Technological and Economic Evaluation
In: Proceedings of ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition : June 7-11, 2021, virtual, online / conference sponsor: International Gas Turbine Institute. - Volume 7: Industrial and cogeneration, manufacturing materials and metallurgy, GT2021-59652, V007T17A014, 6 Seiten, 2021
[DOI: 10.1115/GT2021-59652] Authors and Contributors
Heidemanns, Lukas Franz
Seelbach, Tobias Markus
K�pper, Ugur
Seimann, Martin Albert
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings]
Electrochemical Defect Analysis (EC-D) of Additive Manufactured Components
In: Proceedings of ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition : June 7-11, 2021, virtual, online / conference sponsor: International Gas Turbine Institute. - Volume 7: Industrial and cogeneration, manufacturing materials and metallurgy, 2021
[DOI: 10.1115/GT2021-59482] Authors and Contributors
Sous, Florian
Herrig, Tim
Bergs, Thomas
Karges, Florian
Feiling, Nicole
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Tolerance-Based Optimization of Sinking EDM for Industrial Seal Slot Manufacture
In: Proceedings of ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition : June 7-11, 2021, virtual, online / conference sponsor: International Gas Turbine Institute. - Volume 7: Industrial and cogeneration, manufacturing materials and metallurgy, 2021
[DOI: 10.1115/GT2021-59266] Authors and Contributors
Petersen, Timm
Zeis, Markus
Bergs, Thomas
Source
[Journal Article]
Tolerance-Based Optimization of Sinking Electrical Discharge Machining for Industrial Seal Slot Manufacture
In: Journal of engineering for gas turbines and power, 144 (3), 031007, 2021
[DOI: 10.1115/1.4052562] Authors and Contributors
Petersen, Timm (Corresponding author)
Zeis, Markus
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings]
Fracture Toughness and Tribological Properties of Cemented Carbides Machined by Sinking Electrical Discharge Machining
In: ESAFORM 2021 : 24th International Conference on Material Forming, 1518, 1-9, 2021
[DOI: 10.25518/esaform21.1518] Authors and Contributors
Petersen, Timm (Corresponding author)
K�pper, Ugur
Herrig, Tim
Klink, Andreas
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Investigation on residual stress induced by multiple EDM discharges
In: Procedia CIRP, 102, 482-487, 2021
[DOI: 10.1016/j.procir.2021.09.082] Authors and Contributors
Schneider, Sebastian (Corresponding author)
Vorspohl, Julian
Frerichs, Friedhelm
Klink, Andreas
Meinke, Matthias
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Modelling of Energy Distribution in SEDM on the Basis of Gas Bubble Observations
In: Procedia CIRP, 102, 293-298, 2021
[DOI: 10.1016/j.procir.2021.09.050] Authors and Contributors
Petersen, Timm (Corresponding author)
Schneider, Sebastian
Klink, Andreas
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Concept for the experimental and numerical study of fluid-structure interaction and gas transport in Precise Electrochemical Machining
In: Procedia CIRP, 102, 204-209, 2021
[DOI: 10.1016/j.procir.2021.09.035] Authors and Contributors
Rommes, Bob (Corresponding author)
Lauwers, Daniel
Herrig, Tim
Meinke, Matthias
Schr�der, Wolfgang
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Process Performance of High Energy Wire EDM
In: Procedia CIRP, 101, 230-233, 2021
[DOI: 10.1016/j.procir.2020.11.012] Authors and Contributors
K�pper, Ugur (Corresponding author)
Herrig, Tim
Welling, D.
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Experimental investigation of abrasive properties in waterjet machining
In: Procedia CIRP, 101, 210-213, 2021
[DOI: 10.1016/j.procir.2021.03.128] Authors and Contributors
Sch�ler, M. (Corresponding author)
Dadgar, M.
Herrig, Tim
Klink, Andreas
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Understanding the Influence of Chemical and Thermal Loads on the Productivity for Processing 42CrMo4 Steel and Titanium via Laser-Induced Thermochemical Machining
In: Procedia CIRP, 101, 202-205, 2021
[DOI: 10.1016/j.procir.2020.11.009] Authors and Contributors
Eckert, S. (Corresponding author)
Vollertsen, F.
Schupp, Alexander
Zander, Brita Daniela
Rommes, Bob
et al.
Source
[Contribution to a conference proceedings, Journal Article]
The Concept of Digital Twin and Digital Shadow in Manufacturing
In: Procedia CIRP, 101, 81-84, 2021
[DOI: 10.1016/j.procir.2021.02.010] Authors and Contributors
Bergs, Thomas
Gierlings, Sascha
Auerbach, Thomas
Klink, Andreas
Schraknepper, Daniel
et al.
Source
[Journal Article]
Comparison of Process Signatures for thermally dominated processes
In: CIRP journal of manufacturing science and technology : CIRP-JMST, 35, 217-235, 2021
[DOI: 10.1016/j.cirpj.2021.06.013] Authors and Contributors
Karpuschewski, B.
L�bben, Th.
Meinke, Matthias
Eckert, S.
Frerichs, F.
et al.
Source
[Journal Article]
Microstructural and chemical surface and rim zone changes of ferrite‐perlite 42CrMo4 steel after electrochemical machining
In: Materials science and engineering technology = Materialwissenschaft und Werkstofftechnik, 52 (11), 1214-1229, 2021
[DOI: 10.1002/mawe.202100087] Authors and Contributors
Ehle, Lisa Christine (Corresponding author)
Harst, Simon Christoph
Meyer, H.
Schupp, Alexander
Bey�, Oliver
et al.
Source
[Contribution to a book]
Evaluation Design for Learning with Mixed Reality in Mining Education Based on a Literature Review
In: Learning and Collaboration Technologies: Games and Virtual Environments for Learning : 8th International Conference, LCT 2021, Held as Part of the 23rd HCI International Conference, HCII 2021, Virtual Event, July 24-29, 2021, Proceedings, Part II / edited by Panayiotis Zaphiris, Andri Ioannou, 313-325, 2021
[DOI: 10.1007/978-3-030-77943-6_21] Authors and Contributors
Thurner, Stefan
Daling, Lea M.
Ebner, Markus
Ebner, Martin (Corresponding author)
Sch�n, Sandra
Source
[Contribution to a book, Journal Article]
Reprint of : Application cases of biological transformation in manufacturing technology
In: CIRP journal of manufacturing science and technology : CIRP-JMST, 34, 95-104, 2021
[DOI: 10.1016/j.cirpj.2021.06.008] Authors and Contributors
Bergs, Thomas (Corresponding author)
Schwaneberg, Ulrich
Barth, Sebastian
Hermann, L.
Grunwald, Tim
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
A Decision Matrix for Implementing AR, 360� and VR Experiences into Mining Engineering Education
In: HCI International 2021 - Posters : 23rd HCI International Conference, HCII 2021, Virtual Event, July 24-29, 2021, Proceedings, Part I, 225-232, 2021
[DOI: 10.1007/978-3-030-78642-7_30] Authors and Contributors
Daling, Lea M. (Corresponding author)
Khodaei, Samira
Abdelrazeq, Anas
Isenhardt, Ingrid
Source
[Contribution to a book, Contribution to a conference proceedings]
An innovative approach to connect parcel delivery operations with urban congestion
In: 2021 7th International Conference on Models and Technologies for Intelligent Transportation Systems (MT-ITS) : 16-17 June 2021 / publisher: IEEE, 6 Seiten, 2021
[DOI: 10.1109/MT-ITS49943.2021.9529313] Authors and Contributors
Loder, Allister
Otte, Thomas (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
A Reference Framework for the Performance-Based Decision Support of City Authorities in Urban Freight Transport
In: 2021 International Conference on ICT for Smart Society (ICISS) : [Proceedings] - IEEE, 2021. - ISBN 978-1-6654-1697-9 - doi:10.1109/ICISS53185.2021.9533210, 7 Seiten, 2021
[DOI: 10.1109/ICISS53185.2021.9533210] Authors and Contributors
Otte, Thomas (Corresponding author)
Meisen, Tobias (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Expert System for the Machine Learning Pipeline in Manufacturing
In: IFAC-PapersOnLine, 54 (1), 128-133, 2021
[DOI: 10.1016/j.ifacol.2021.08.014] Authors and Contributors
Frye, Maik
Krau�, Jonathan
Schmitt, Robert H.
Source
[Contribution to a conference proceedings, Journal Article]
DPART : a dital twin framework for the machining domain
In: MM Science journal, 2021 (5), 5134-5141, 2021
[DOI: 10.17973/MMSJ.2021_11_2021168] Authors and Contributors
Ganser, P. (Corresponding author)
Venek, T.
Rudel, V.
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Fundamental Investigations on the Machinability of Additively Manufactured Multi-Materials
In: MM Science journal, 2021, 5098-5105, 2021
[DOI: 10.17973/MMSJ.2021_11_2021160] Authors and Contributors
Kelliger, Tobias (Corresponding author)
Schraknepper, D.
Bergs, Thomas
Source
[Book, Dissertation / PhD Thesis]
Feinschneiden mit Hartmetallstempeln
In: Ergebnisse aus der Produktionstechnik 26/2021, 2021 Authors and Contributors
Voigts, Herman Otto
Source
[Journal Article]
Identifikation qualit�tskritischer Parameter
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 116 (10), 695-700, 2021
[DOI: 10.1515/zwf-2021-0154] Authors and Contributors
Abramowski, Johann-Philip (Corresponding author)
Kies, Alexander
Landwehr, Inga
Aichele, Andreas
Hachgenei, Enno
et al.
Source
[Journal Article]
On the simulation of the first natural frequency of a tuned mass disc damper
In: MM Science journal, 2021 (4), 4924-4929, 2021
[DOI: 10.17973/MMSJ.2021_10_2021091] Authors and Contributors
Brecher, Christian
Zhao, Guifeng (Corresponding author)
Fey, Marcel
Source
[Report]
Resilienz in der Strategiearbeit: Eine Bestandsaufnahme, 2021
[DOI: 10.24406/IPT-N-640933] Authors and Contributors
Schuh, G�nther (Corrressponding author)
Patzwald, Marc (Corrressponding author)
Krebs, Leonie (Corrressponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
A Conceptual Model for Digital Shadows in Industry and Its Application
In: Conceptual Modeling : 40th International Conference, ER 2021, Virtual Event, October 18-21, 2021, Proceedings / Aditya Ghose, Jennifer Horkoff, V�tor E. Silva Souza, Jeffrey Parsons, Joerg Evermann, 271-281, 2021
[DOI: 10.1007/978-3-030-89022-3_22] Authors and Contributors
Becker, Fabian
Bibow, Pascal
Dalibor, Manuela
Gannouni, Aymen
Hahn, Viviane
et al.
Source
[Abstract, Contribution to a conference proceedings]
Development of a technical-economic evaluation model for sustainable multifilament wound composite pressure vessels based on a Fuzzy Logic approach
In: Aachen-Dresden-Denkendorf : International Textile Conference : Digital Event, November 9-10, 2021 : Book of abstracts / Organization: Textil- und Faserforschung Denkendorf (DITF), DWI-Leibniz-Institut f�r Interaktive Materialien, Aachen, ITM, Institut f�r Textilmaschinen und Textile Hochleistungswerkstofftechnik der TU Dresden. - Scientific Board - Wissenschaftlicher Beirat: Bayram Aslan, Michael R. Buchmeiser, Chokri Cherif, Andreas Fery, G�tz T. Gresser, Thomas Gries, Jochen Gutmann, Stefan Hecht, Andreas Herrmann, Heike Illing-G�nther, Maike Rabe, Fabian Schreiber, Mathias Ulbricht, Lutz Vossebein, 70-71, 2021 Authors and Contributors
Kreutzer, Dennis (Corresponding author)
M�lling, Tim
Bitter-Krahe, Jan
Hees, Frank
Source
[Contribution to a conference proceedings]
Determination Of The Level Of Automation For Additive Manufacturing Process Chains
In: [2nd Conference on Production Systems and Logistics, CPSL 2021], 585-594, 2021
[DOI: 10.15488/11257] Authors and Contributors
Horstkotte, Rainer
Bruning, Benedikt
Pr�mmer, Marcel
Arntz, Kristian
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Friction behavior in metal cutting : Modeling and simulation
In: Procedia CIRP, 102, 405-410, 2021
[DOI: 10.1016/j.procir.2021.09.069] Authors and Contributors
Abouridouane, Mustapha
Bergs, Thomas
Schraknepper, Daniel
Wirtz, Guido
Source
[Report]
Sektionskonzept Meta(daten), Terminologien und Provenienz zur Einrichtung einer Sektion im Verein Nationale Forschungsdateninfrastruktur (NFDI) e.V, 2021
[DOI: 10.5281/ZENODO.5619089] Authors and Contributors
Koepler, Oliver (Corrressponding author)
Schrade, Torsten (Corrressponding author)
Neumann, Steffen
Stotzka, Rainer
Wiljes, Cord
et al.
Source
[Report]
Sektionskonzept Training & Education zur Einrichtung einer Sektion im Verein Nationale Forschungsdateninfrastruktur (NFDI) e.V, 2021
[DOI: 10.5281/ZENODO.5599770] Authors and Contributors
Herres-Pawlis, Sonja (Corrressponding author)
Pelz, Peter (Corrressponding author)
Kockmann, Norbert
Gl�ser, Roger
Richter, Manuela
et al.
Source
[Journal Article]
Pr�diktive Qualit�t in der Prozesslenkung : Neuronales Netz als SPC 4.0
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 116 (10), 662-666, 2021
[DOI: 10.1515/zwf-2021-0134] Authors and Contributors
Beckschulte, Sebastian (Corresponding author)
Klasen, Nils
Huebser, Louis
Schmitt, Robert H.
Source
[Journal Article]
(Selbst-)lernendes Fehlermanagement : Expertise der Fehlerbearbeitung systematisch nutzbar machen
In: Qualit�t und Zuverl�ssigkeit, 66 (10), 14-16, 2021 Authors and Contributors
G�nther, Robin Yannick Rocky (Corresponding author)
Beckschulte, Sebastian
Bennerscheid, Nicolas
Schmitt, Robert H.
Source
[Contribution to a conference proceedings]
Development of Digital Shadows for Production Control
In: Proceedings CPSL 2021 : 2nd Conference on Production Systems and Logistics (CPSL 2021) 10.-11.08.2021, online, 65-74, 2021
[DOI: 10.15488/11251] Authors and Contributors
Schuh, G�nther
G�tzlaff, Andreas
Schmidhuber, Matthias
Maibaum, Judith (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Requirements Engineering through Exploratory Analysis of Usage Data
In: 2021 IEEE Technology & Engineering Management Conference - Europe (TEMSCON-EUR) / IEEE; IEEE TEMS ; TEMSCON-EUR 2021 conference general co-chairs: Marina Dabić, Andy Chen, 314-319, 2021
[DOI: 10.1109/TEMSCON-EUR52034.2021.9488571] Authors and Contributors
Riesener, Michael
D�lle, Christian
Lender, Benjamin Nils Johannes (Corresponding author)
Schuh, G�nther
Source
[Contribution to a conference proceedings]
Pre-Selection Of Suitable Regression Methods For The Determination Of Interactions And Forecasts In Global Production Networks
In: Proceedings of the 2nd Conference on Production Systems and Logistics (CPSL 2021), 10.-11.08.2021, Vancouver/ Canada, Online, 749-759, 2021
[DOI: 10.15488/11239] Authors and Contributors
Schuh, G�nther
G�tzlaff, Andreas
Ays, Julian Leander
Rodemann, Niklas (Corresponding author)
Podbreznik, Miha
Source
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Friction behavior in metal cutting : Modeling and simulation
In: Procedia CIRP, 102, 405-410, 2021 Authors and Contributors
Abouridouane, Mustapha (Corresponding author)
Bergs, Thomas
Schraknepper, Daniel
Wirtz, Guido
Source
[Journal Article]
Psychoacoustic Optimization of Gear Noise - Chaotic Scattering of Micro Geometry and Pitch on Cylindrical Gears
In: Gear technology, 2021 (7), 54-65, 2021 Authors and Contributors
Kasten, Marcel-Mich�l (Corresponding author)
Brimmers, Jens
Brecher, Christian
Source
[Contribution to a book, Contribution to a conference proceedings]
Autoencoder based Wear Assessment in Sheet Metal Forming
In: International Deep-Drawing Research Group Conference (IDDRG 2021) 21st June - 2nd July 2021, Stuttgart, Germany, 012082, 2021
[DOI: 10.1088/1757-899X/1157/1/012082] Authors and Contributors
Niemietz, Philipp (Corresponding author)
Unterberg, Martin Christian
Trauth, Daniel
Bergs, Thomas
Source
[Journal Article]
Fields of action towards automated facility layout design and optimization in factory planning : A systematic literature review
In: CIRP journal of manufacturing science and technology, 35, 864-871, 2021
[DOI: 10.1016/j.cirpj.2021.09.013] Authors and Contributors
Burggr�f, Peter
Adlon, Tobias
Hahn, Viviane (Corresponding author)
Schulz-Isenbeck, Timm
Source
[Journal Article]
Perception Engineering Learning With Virtual Reality
In: IEEE transactions on learning technologies, 14 (4), 500-514, 2021
[DOI: 10.1109/TLT.2021.3107407] Authors and Contributors
Bohne, Thomas (Corresponding author)
Heine, Ina
Gurerk, Ozgur
Rieger, Christoph
Kemmer, Lukas
et al.
Source
[Book, Dissertation / PhD Thesis]
Virtual reference frame based on distributed large-scale metrology providing coordinates as a service
In: Ergebnisse aus der Produktionstechnik 27/2021, 2021
[DOI: 10.18154/RWTH-2021-10238] Authors and Contributors
Montavon, Benjamin Leendert
Source
[Contribution to a book, Contribution to a conference proceedings]
Recurrent Online and Transfer Learning of a CNC-Machining Center with Support Vector Machines
In: Proceedings of 2021 IEEE 30th International Symposium on Industrial Electronics (ISIE), 7 Seiten, 2021
[DOI: 10.1109/ISIE45552.2021.9576328] Authors and Contributors
Ay, Muzaffer (Corresponding author)
Schwenzer, Max
Abel, Dirk
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings]
Recommendations in E-learning: Identifying Current Trends with Automated Crawling Methods
In: EDULEARN21 : 13th International Conference on Education and New Learning Technologies : Conference Proceedings / Edited by L. G�mez Chova, A. L�pez Mart�nez, I. Candel Torres, 7914-7920, 2021
[DOI: 10.21125/edulearn.2021.1615] Authors and Contributors
Werz, Johanna Miriam
Schruff, Daniel
Schiffeler, Nina Maria
Borowski, Esther
Isenhardt, Ingrid
Source
[Journal Article]
Einflussfaktoren auf die Nutzungsintention von Pflegekr�ften zur Verwendung digitaler Technologien in der ambulanten Pflege : Fallstudie zur Einf�hrung eines Sensortextils
In: Zeitschrift f�r Arbeitswissenschaft : ZfA, 75 (4), 470-490, 2021
[DOI: 10.1007/s41449-021-00277-4] Authors and Contributors
G�sken, Sarah Ranjana (Corresponding author)
Frings, Katrin
Zafar, Faizan
Saltan, Timur
Fuchs-Frohnhofen, Paul
et al.
Source
[Book, Proceedings]
Internet of Production - Turning Data into Sustainability : AWK'21, 2021 Authors and Contributors
Bergs, Thomas (Editor)
Brecher, Christian (Editor)
Schmitt, Robert H. (Editor)
Schuh, G�nther (Editor)
Krause, Susanne (Contributor)
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Design of a semantic information model for automated tape placement systems using OPC-UA
In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 8 Seiten, 2021
[DOI: 10.1109/ETFA45728.2021.9613216] Authors and Contributors
Peitz, Alexander Constantin (Corresponding author)
Striet, Philipp (Corresponding author)
Emonts, Michael Gustav (Corresponding author)
Fischer, Kai (Corresponding author)
Brecher, Christian (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Thermal analysis of the laser-assisted tape placement process with a piece-flow principle
In: [SAMPE EUROPE Conference and Exhibition 2021 Baden/Z�rich - Switzerland], 1-8, 2021 Authors and Contributors
Striet, Philipp
Emonts, Michael Gustav
Fischer, Kai
Brecher, Christian
Source
[Contribution to a book, Contribution to a conference proceedings]
Industrial Innovation & Employability - Sustainable Skilling of Smart Experts
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Herausgeber: AWK Aachener Werkzeugmaschinen-Kolloquium ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; weitere Mitwirkende: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 369-404, 2021 Authors and Contributors
Metzmacher, Amelie Isabel
Hellebrandt, Thomas Sven
Adam, Tobias
Heine, Ina
Bergholz, Markus
et al.
Source
[Journal Article]
Efficient Determination of Stability Lobe Diagrams Deploying an Automated, Data-based Online NC Program Adaption
In: MM Science journal, 18 (4), 4830-4835, 2021
[DOI: 10.17973/MMSJ.2021_10_2021052] Authors and Contributors
Brecher, Christian
Klimaschka, Ralph Bernhard (Corresponding author)
Steinert, Alexander
Neus, Stephan
Source
[Contribution to a conference proceedings]
Investigation of transformation behaviour of pseudoelastic NiTi shape memory alloys under compressive loading to assess the potential use in vibration damping in milling operations
In: Proceedings of the ASME 2021 Conference on Smart Materials, Adaptive Structures, and Intelligent Systems, SMASIS2021, September 14 - 15, 2021, Virtual Conference, SMASIS2021- 67467, 2021
[DOI: 10.1115/SMASIS2021-67467] Authors and Contributors
Brecher, Christian
Klumpen, Niclas (Corresponding author)
Neus, Stephan
D�ltgen, Peter E.
Thei�, Ralf
et al.
Source
[Contribution to a book, Journal Article]
A Survey on AI-Driven Digital Twins in Industry 4.0: Smart Manufacturing and Advanced Robotics
In: Sensors, 21 (19), Artikel 6340, 2021
[DOI: 10.3390/s21196340] Authors and Contributors
Huang, Ziqi (Corresponding author)
Shen, Yang
Li, Jiayi
Fey, Marcel
Brecher, Christian
Source
[Contribution to a book, Contribution to a conference proceedings]
Nachhaltige Gesch�ftsmodelle f�r Werkzeugmaschinen
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Herausgeber: AWK Aachener Werkzeugmaschinen-Kolloquium ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; weitere Mitwirkende: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 433-462, 2021 Authors and Contributors
Brecher, Christian
Butz, Felix
Kaever, Michael
Nagel, Erik
Neus, Stephan
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Data Science in Production
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Herausgeber: AWK Aachener Werkzeugmaschinen-Kolloquium ; Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh ; weitere Mitwirkende: Susanne Krause, Alexander Kreppein, Christian L�rken, Markus Meurer, Heidi Peters, Mich�le Robrecht, Stefanie Strigl, 221-257, 2021 Authors and Contributors
Brecher, Christian
Biernat, Benedikt Markus Hubert
Fey, Marcel
Kehne, Sebastian
Lohrmann, Vincent
et al.
Source
[Journal Article]
Einsatz von Zementbeton f�r den St�nder einer Werkzeugmaschine
In: Werkstoffe in der Fertigung, 58 (4), 28-30, 2021 Authors and Contributors
Brecher, Christian
Kiesewetter-Marko, Caroline (Corresponding author)
Neus, Stephan
Source
[Journal Article]
Intelligente �berwachung von Werkzeugverschlei� : Datenanalyse in der Produktion basierend auf maschinen-internen Daten
In: VDI-Z integrierte Produktion, 163 (09), 63-66, 2021
[DOI: 10.37544/0042-1766-2021-09-63] Authors and Contributors
Brecher, Christian
Xi, Tiandong (Corresponding author)
Beninc�, Igor Medeiros
Kehne, Sebastian
Fey, Marcel
Source
[Contribution to a book, Contribution to a conference proceedings]
Estimation-Based Temperature Control InLaser-Assisted, Thermoplastic Automated TapePlacement
In: [SAMPE EUROPE Conference and Exhibition 2021 Baden/Z�rich - Switzerland], 2021 Authors and Contributors
Peitz, Alexander Constantin
Nalborczyk, Marcel
Emonts, Michael Gustav
Fischer, Kai
Brecher, Christian
Source
[News, Website]
Formged�chtnislegierungen - Schwingungen in der Maschine d�mpfen
In: Maschinenmarkt, 2021 Authors and Contributors
Brecher, Christian
Klumpen, Niclas (Corresponding author)
Neus, Stephan
D�ltgen, Peter
Thei�, R.
et al.
Source
[News, Website]
Zerspanungsprozesse nachhaltig auslegen
In: Maschinenmarkt, 2021 Authors and Contributors
Brecher, Christian
Klimaschka, Ralph Bernhard (Corresponding author)
Steinert, Alexander
Neus, Stephan
Source
[Contribution to a book, Journal Article]
Simulative and Experimental Determination of the Tooth Flank Fracture Load Capacity of Large Modulus Gears
In: Gear technology, 38 (August), 60-71, 2021 Authors and Contributors
Brecher, Christian
L�penhaus, Christoph
Goergen, Fabian (Corresponding author)
Source
[Contribution to a book]
Der Data Lifecycle von der Erfassung bis zur Erkenntnis: Einsparpotentiale in der automatisierten Fertigungstechnik
In: Monetarisierung von technischen Daten: Innovationen aus Industrie und Forschung / Daniel Trauth, Thomas Bergs, Wolfgang Prinz (Hrsg.), 537-558, 2021
[DOI: 10.1007/978-3-662-62915-4_27] Authors and Contributors
Brecher, Christian (Corresponding author)
Blanke, Philipp
Buchsbaum, Melanie Sarah Katharina
Dassen, Yannick
Fimmers, Christian (Corresponding author)
et al.
Source
[Journal Article]
Kompensation thermo-elastischer Maschinenfehler: Steigerung der Genauigkeit White-Box-basierter Korrekturmodelle
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 116 (7/8), 505-510, 2021
[DOI: 10.1515/zwf-2021-0122] Authors and Contributors
Brecher, Christian
Fey, Marcel
Wittmann, Marcel (Corresponding author)
Dehn, Mathias
Source
[Journal Article]
Prozess-Maschine-Interaktion des Verzahnungshonens : Modellierung der Prozess-Maschine-Interaktion beim Verzahnungshonen
In: wt Werkstattstechnik online, 111 (5), 336-342, 2021
[DOI: 10.37544/1436-4980-2021-05-70] Authors and Contributors
Brecher, Christian
Bergs, Thomas
Kiesewetter-Marko, Caroline (Corresponding author)
Schrank, Maximilian G�nter
Neus, Stephan
et al.
Source
[Contribution to a book, Journal Article]
Reprint of: Automated stem cell production by bio-inspired control
In: CIRP journal of manufacturing science and technology, 34, 84-94, 2021
[DOI: 10.1016/j.cirpj.2021.06.010] Authors and Contributors
Monostori, L�szl� (Corresponding author)
Cs�ji, Bal�zs Cs
Egri, P�ter
Kis, Kriszti�n B.
V�ncza, J�zsef
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
A 360-VR Authoring Tool for Engineering Teachers - Virtual Excursions for Mining Engineering Education Courses
In: Blended learning in engineering education: challenging, enlightening - and lasting? : SEFI 2021 49th Annual Conference : proceedings / editors: Hans-Ulrich Hei�, Hannu-Matti J�rvinen, Annette Mayer, Alexandra Schulz, 283-292, 2021 Authors and Contributors
Khodaei, Samira
Abdelrazeq, Anas
Daling, Lea M.
Isenhardt, Ingrid
Source
[Contribution to a conference proceedings, Journal Article]
A two-step digitalization level assessment approach for manufacturing companies
In: Procedia manufacturing, 54, 25-30, 2021
[DOI: 10.1016/j.promfg.2021.07.005] Authors and Contributors
Schuh, G�nther
Scheuer, Thomas (Corresponding author)
Nick, G�bor
Szaller, �d�m
V�rgedő, Tam�s
Source
[Book, Dissertation / PhD Thesis]
Increasing fatigue strength of austenitic stainless steel using machine hammer peening
In: Ergebnisse aus der Produktionstechnik 25/2021, 2021 Authors and Contributors
Mannens, Robby Norbert
Source
[Journal Article]
Systematization of Technological and Economic Risks for the Selection of new Technologies
In: Journal of production systems and logistics, 1, 12 S.; Artikelnummer 15, 2021
[DOI: 10.15488/11349] Authors and Contributors
Schuh, G�nther
Scholz, Patrick
Krech, Max
Source
[Book, Dissertation / PhD Thesis]
A redesign with particular focus on human factors in the automotive development process
In: Berichte aus dem Maschinenbau, 2021 Authors and Contributors
Surendra, Sanjiv
Source
[Conference Presentation]
Confidential Computing-Induced Privacy Benefits for the Bootstrapping of New Business Relationships
In: Cloud Computing Security Workshop online 2021-11-14 - 2021-11-14, 2021
[DOI: 10.18154/RWTH-2021-09499] Authors and Contributors
Pennekamp, Jan
Fuhrmann, Frederik
Dahlmanns, Markus
Heutmann, Timo
Kreppein, Alexander
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Derivation of Constituent Problem Characteristics for the Application of Machine Learning Systems
In: 2021 4th International Conference on Information and Computer Technologies : ICICT 2021 : Kahului, Maui Island, Hawaii, United States, 11-14 March 2021 : proceedings / advisory chair: Mohsen Guizani, Qatar University, Doha, Qatar (IEEE Fellow), 38-46, 2021
[DOI: 10.1109/ICICT52872.2021.00014] Authors and Contributors
Schuh, G�nther (Corresponding author)
Scholz, Paul (Corresponding author)
Burger, Timon (Corresponding author)
Source
[Journal Article]
Increasing Resilience in Procurement in the Context of the Internet of Production
In: Journal of production systems and logistics, 1, 16, 2021
[DOI: 10.15488/11350] Authors and Contributors
Linnartz, Maria
Motz, Ursula
Schr�er, Tobias
Stich, Volker
M�ller, Kai Bruno
et al.
Source
[Journal Article]
Industrielle Produktionsanlagen modular erweitern mit 5G : Ein Einblick in aktuelle Forschungsprojekte innerhalb des 5G-Industry Campus Europe
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 116 (5), 332-336, 2021
[DOI: 10.1515/zwf-2021-0080] Authors and Contributors
Schmitt, Sarah (Corresponding author)
Brunk, Nicolas
K�nig, Niels
Lange, Dirk
Schmitt, Robert H.
Source
[Journal Article]
Mold Making in Austria
In: Kunststoffe, 111 (10), 46-51, 2021 Authors and Contributors
Boos, Wolfgang
Arntz, Kristian
Kelzenberg, Christoph Maximilian Bernd
Pr�mmer, Marcel
Ebbecke, Christoph Wilhelm
et al.
Source
[Book, Dissertation / PhD Thesis]
Zum Einsatz elastischer Walzen und elektromagnetischer Induktion in Doppelbandpressen zur kontinuierlichen Herstellung thermoplastischer Faserverbundlaminate
In: Ergebnisse aus der Produktionstechnik 24/2021, 2021 Authors and Contributors
Wendt, Albert
Source
[Book]
Masing Handbuch Qualit�tsmanagement
In: Hanser eLibrary, 2021
[DOI: 10.3139/9783446466210] Authors and Contributors
Pfeifer, Tilo (Editor)
Schmitt, Robert H. (Editor)
Source
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
The finite cell method for the prediction of machining distortion caused by initial residual stresses in milling
In: Procedia CIRP, 104, 144-149, 2021 Authors and Contributors
Landwehr, M.
Schmid, Sebastian
Holla, V.
Ganser, P.
Bergs, Thomas
et al.
Source
[Contribution to a book]
Qualit�tsmanagement bei der Entwicklung smarter Produkte
In: Masing Handbuch Qualit�tsmanagement / Tilo Pfeifer, Robert Schmitt, 477-511, 2021
[DOI: 10.3139/9783446466210.021] Authors and Contributors
Kiesel, Raphael
Schmitt, Robert H.
Source
[Journal Article]
Entscheidungshilfe f�r IT-Sicherheitsinvestitionen
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 116 (3), 180-183, 2021
[DOI: 10.1515/zwf-2021-0036] Authors and Contributors
Heutmann, Timo
Zhou, Beiyan
Kiesel, Raphael
Schmitt, Robert H.
Source
[Book, Report]
Cybersecurity in Networked Production : White Paper, 2021
[DOI: 10.24406/ipt-n-633345] Authors and Contributors
Kiesel, Raphael
Kies, Alexander D.
Kreppein, Alexander (Corresponding author)
Heutmann, Timo
Dering, Jan
et al.
Source
[Contribution to a conference proceedings, Journal Article]
The finite cell method for the prediction of machining distortion caused by initial residual stresses in milling
In: Procedia CIRP, 102, 144-149, 2021
[DOI: 10.1016/j.procir.2021.09.025] Authors and Contributors
Landwehr, M. (Corresponding author)
Schmid, Sebastian
Holla, V.
Ganser, P.
Bergs, Thomas
et al.
Source
[Journal Article]
Approach for multiscale modeling the thermomechanical tool load in gear hobbing
In: Forschung im Ingenieurwesen, 12 Seiten, 2021
[DOI: 10.1007/s10010-021-00531-5] Authors and Contributors
Tro�, Nico (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Source
[Journal Article]
From Single Batch to Mass Production-Automated Platform Design Concept for a Phase II Clinical Trial Tissue Engineered Cartilage Product
In: Frontiers in medicine, 8, 712917, 2021
[DOI: 10.3389/fmed.2021.712917] Authors and Contributors
Haeusner, Sebastian (Corresponding author)
Herbst, Laura Marie (Corresponding author)
Bittorf, Patrick
Schwarz, Thomas
Henze, Chris
et al.
Source
[Book, Dissertation / PhD Thesis]
Vorhersage der geometrischen Oberfl�chenver�nderung im W�lzkontakt
In: Ergebnisse aus der Produktionstechnik 23/2021, 2021
[DOI: 10.18154/RWTH-2021-09098] Authors and Contributors
Mevissen, Dieter Johannes Wilhelm
Source
[Contribution to a conference proceedings]
Quantification of a System Dynamics Model for Optimized Failure Management in Manual Assembly
In: Proceedings CPSL 2021 : 2nd Conference on Production Systems and Logistics (CPSL 2021) 10.-11.08.2021, online, 167-176, 2021
[DOI: 10.15488/11278] Authors and Contributors
Liang, Junjie
G�nther, Robin Yannick Rocky
Beckschulte, Sebastian
Exner, Robin
Kiesel, Raphael
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Creating digital products in engineering companies : a practitioner’s review
In: Procedia CIRP, 100, 205-210, 2021 Authors and Contributors
Permin, Eike
Vollmer, Thomas (Corresponding author)
Grunert, Dennis
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Towards Production-Ready Reinforcement Learning Scheduling Agents: A Hybrid Two-Step Training Approach Based on Discrete-Event SimulationsSam
In: Simulation in Produktion und Logistik 2021 : Erlangen, 15.-17. September 2021 / J�rg Franke & Peter Schuderer (Hrsg.), 325-336, 2021 Authors and Contributors
Kemmerling, Marco
Samsonov, Vladimir
L�tticke, Daniel
Schuh, G�nther
G�tzlaff, Andreas
et al.
Source
[Journal Article]
Analyse der Wirkmechanismen im fluidfreien W�lzkontakt mit beschichteten Oberfl�chen
In: Forschung im Ingenieurwesen : research journal = Engineering research, 2021
[DOI: 10.1007/s10010-021-00534-2] Authors and Contributors
Sklenak, Sebastian (Corresponding author)
Brimmers, Jens
Brecher, Christian
Source
[Journal Article]
Influences on the excitation behavior of lightweight planetary gearboxes
In: Forschung im Ingenieurwesen : research journal = Engineering research, 2021
[DOI: 10.1007/s10010-021-00512-8] Authors and Contributors
Theling, Julian Anselm (Corresponding author)
Brimmers, Jens
Brecher, Christian
Source
[Journal Article]
Consideration of micro-interaction in the modeling of generating gear grinding processes
In: Forschung im Ingenieurwesen, 2021
[DOI: 10.1007/s10010-021-00533-3] Authors and Contributors
de Oliveira Teixeira, Patricia (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Creating digital products in engineering companies : a practitioner’s review
In: Procedia CIRP, 100, 205-210, 2021
[DOI: 10.1016/j.procir.2021.05.056] Authors and Contributors
Permin, Eike
Vollmer, Thomas (Corresponding author)
Grunert, Dennis
Schmitt, Robert H.
Source
[Book, Dissertation / PhD Thesis]
Datenbasiertes Lernen in Produktionsnetzwerken
In: Ergebnisse aus der Produktionstechnik 22/2021, 2021 Authors and Contributors
Hast, Katharina
Source
[Book, Dissertation / PhD Thesis]
Modellierung der Energiedissipation in der Funkenerosion
In: Ergebnisse aus der Produktionstechnik 21/2021, 2021 Authors and Contributors
Schneider, Sebastian
Source
[Contribution to a book, Contribution to a conference proceedings]
Human Digital Shadow: Data-based Modeling of Users and Usage in the Internet of Production
In: 14th International Conference on Human System Interaction : 8-10 July 2021 : Conference Proceedings : Gdańsk University of Technology / Organized by: Gdańsk University of Technology, GUT, Faculty of Electronics, Telecommunications and Informatics, Editors: Adam Bujnowski, Mariusz Kaczmarek, Jacek Rumiński, 8 Seiten, 2021
[DOI: 10.1109/HSI52170.2021.9538729] Authors and Contributors
Mertens, Alexander (Corresponding author)
P�tz, Sebastian
Brauner, Philipp
Brillowski, Florian Sascha
Buczak, Nadine
et al.
Source
[Journal Article]
IT-Sicherheit in der vernetzten Produktion : Unzureichende Sicherheitsma�nahmen gef�hrden den digitalen Wandel
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 116 (6), 442-447, 2021
[DOI: 10.1515/zwf-2021-0059] Authors and Contributors
Kiesel, Raphael
Kies, Alexander (Corresponding author)
Kreppein, Alexander
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Express Wire Coil Cladding (EW2C) As an Advanced Technology To Accelerate Additive Manufacturing and Coating
In: Proceedings of ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition : June 7-11, 2021, virtual, online / conference sponsor: International Gas Turbine Institute. - Volume 7: Industrial and cogeneration, manufacturing materials and metallurgy, V007T17A001, 9 Seiten, 2021
[DOI: 10.1115/GT2021-58709] Authors and Contributors
Gipperich, Marius
Riepe, Jan
Day, Robin
Bergs, Thomas
Source
[Journal Article]
Messtechnik im Werkzeug- und Formenbau
In: VDI-Z, 163 (05), 17-19, 2021
[DOI: 10.37544/0042-1766-2021-05-17] Authors and Contributors
Piotrowski, Tobias
Wilms, Marcel
Pr�mmer, Marcel
Schmitt, Robert H.
Source
[Journal Article]
Entwicklung einer neuen Messstrategie zur Qualit�tssicherung von Hypoidgetrieben : Objektivierung der Tragbildpr�fung
In: wt Werkstattstechnik online, 111 (6), 464-468, 2021
[DOI: 10.37544/1436-4980-2021-06-108] Authors and Contributors
Gerdhenrichs, Stefan
Chhor, Jimmy (Corresponding author)
Schmitt, Robert H.
Source
[Journal Article]
Modelling for Decision-making in Dynamical Line-less Assembly Systems
In: Journal of production systems and logistics, 1, 12, 2021
[DOI: 10.15488/11327] Authors and Contributors
Grunert, Dennis
G�ppert, Mirko Robin Amon
Hort, Simon
Rachner, Jonas Sebastian
Grahn, Lea
et al.
Source
[Proceedings]
The Predictive Model of Industrial Employability (PMIE) - Enabling employees to effectively perform future production work, 2021
[DOI: 10.1109/CISPEE47794.2021.9507207] Authors and Contributors
Metzmacher, Amelie Isabel (Corresponding author)
Beierle, Syrina
Heine, Ina
Letmathe, Peter
Schmitt, Robert H.
Source
[Website]
IoC - Internet of Construction, 2021 Authors and Contributors
Brell-Cokcan, Sigrid
Adams, Thomas Julian (Editor)
M�nker, S�ren (Editor)
Source
[Journal Article]
Evolution and future of manufacturing systems
In: CIRP annals, manufacturing technology, 70 (2), 635-658, 2021
[DOI: 10.1016/j.cirp.2021.05.008] Authors and Contributors
ElMaraghy, Hoda (Corresponding author)
Monostori, Laszlo
Schuh, G�nther
ElMaraghy, Waguih
Source
[Journal Article]
A novel approach for the efficient modeling of material dissolution in electrochemical machining
In: International journal of solids and structures, 229, 111106, 2021
[DOI: 10.1016/j.ijsolstr.2021.111106] Authors and Contributors
van der Velden, Tim (Corresponding author)
Rommes, Bob
Klink, Andreas
Reese, Stefanie
Waimann, Johanna
Source
[Contribution to a book, Journal Article]
Dynamic, Adaptive Inline Process Monitoring for Laser Material Processing by Means of Low Coherence Interferometry
In: Applied Sciences, 11 (16), 7556, 2021
[DOI: 10.3390/app11167556] Authors and Contributors
Zechel, Fabian (Corresponding author)
Jasovski, Julia
Schmitt, Robert H.
Source
[Book, Dissertation / PhD Thesis]
Agile Fabrikplanung durch das Minimum Viable Production System
In: Ergebnisse aus der Produktionstechnik 18/2021, 2021 Authors and Contributors
Bertling, Matthias
Source
[Book, Dissertation / PhD Thesis]
Qualifizierung digitaler Messprozesse
In: Ergebnisse aus der Produktionstechnik 20/2021, 2021
[DOI: 10.18154/RWTH-2021-08368] Authors and Contributors
Lehmann, Nico
Source
[Book, Dissertation / PhD Thesis]
Blockchainbasierte Maschinen- und Anlagenanbindungen f�r datenbasierte Dienstleistungen
In: Schriftenreihe Rationalisierung 179, 2021 Authors and Contributors
Voswinckel, Carl Themo
Source
[Contribution to a book, Journal Article]
Die Nationale Forschungsdateninfrastruktur f�r die Ingenieurwissenschaften (NFDI4Ing)
In: Bausteine Forschungsdatenmanagement, 2021 (2), [110]-123, 2021
[DOI: 10.17192/BFDM.2021.2.8329] Authors and Contributors
Bronger, Torsten
Demandt, Evariste Immanuel
Heine, Ina
Kraft, Angelina
Preu�, Nils
et al.
Source
[Report]
NFDI Cross-cutting Topics Workshop Report, 2021
[DOI: 10.5281/ZENODO.4593770] Authors and Contributors
Ebert, Barbara
Fluck, Juliane
Gl�ckner, Frank Oliver
Koepler, Oliver
Miller, Bernhard
et al.
Source
[Contribution to a book]
Das Internet of Production als Fundament der Datenverwertung in der Produktion : Herausforderungen und L�sungsans�tze des datengetriebenen Erkenntnisgewinns
In: Monetarisierung von technischen Daten : Innovationen aus Industrie und Forschung / Daniel Trauth, Thomas Bergs, Wolfgang Prinz (Hrsg.), 275-295, 2021
[DOI: 10.1007/978-3-662-62915-4_15] Authors and Contributors
Becker, Marco (Corresponding author)
Brockmann, Matthias
Niemietz, Philipp
Trauth, Daniel
Bergs, Thomas
et al.
Source
[Book, Dissertation / PhD Thesis]
High-pressure cutting fluid supply in milling
In: Ergebnisse aus der Produktionstechnik 17/2021, 2021 Authors and Contributors
Lakner, Thomas
Source
[Journal Article]
Digitalisierung in der manuellen Montage: Montageprozesse in Zeiten von Industrie 4.0
In: Qualit�t und Zuverl�ssigkeit : QZ, 66 (8), 18-21, 2021 Authors and Contributors
Beckschulte, Sebastian (Corresponding author)
Huebser, Louis
G�nther, Robin Yannick Rocky
Schmitt, Robert H.
Source
[Book, Dissertation / PhD Thesis]
Ideenspezifischer Anforderungsraum f�r die Umsetzung radikaler Innovationen
In: Ergebnisse aus der Produktionstechnik 19/2021, 2021 Authors and Contributors
Zeller, Paul
Source
[Book]
Monetarisierung von technischen Daten : Innovationen aus Industrie und Forschung
In: Springer eBook Collection, 2021
[DOI: 10.1007/978-3-662-62915-4] Authors and Contributors
Trauth, Daniel (Editor)
Bergs, Thomas (Editor)
Prinz, Wolfgang (Editor)
Source
[Journal Article]
Review on model predictive control: an engineering perspective
In: The international journal of advanced manufacturing technology, 117 (5/6), 1327-1349, 2021
[DOI: 10.1007/s00170-021-07682-3] Authors and Contributors
Schwenzer, Max (Corresponding author)
Ay, Muzaffer
Bergs, Thomas
Abel, Dirk
Source
[Contribution to a book, Contribution to a conference proceedings]
Understand and Control Complexity in Cyber-Physical Systems by Analyzing Complexity Drivers
In: [4th IEEE International Conference on Industrial Cyber-Physical Systems, ICPS 2021, 2021-05-10 - 2021-05-12, online], 255-260, 2021
[DOI: 10.1109/ICPS49255.2021.9468255] Authors and Contributors
Riesener, Michael
D�lle, Christian
Keuper, Alexander (Corresponding author)
Schuh, G�nther
Source
[Journal Article]
Potentials for Process Monitoring in Bevel Gear Grinding
In: Gear technology, 38 (5), 60-71, 2021 Authors and Contributors
Bergs, Thomas
L�penhaus, Christoph
Solf, Mareike (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Validation of the plane-based penetration calculation for gear skiving
In: Procedia CIRP, 99, 220-225, 2021 Authors and Contributors
Jan�en, Christopher Maria
Brimmers, Jens
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Calculation of the maximum chip thickness for a radial-axial infeed in gear hobbing
In: Procedia CIRP, 99, 232-236, 2021 Authors and Contributors
Tro�, Nico
Brimmers, Jens
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Generation and evaluation of automation concepts of additive process chains with Laser Powder Bed Fusion (L-PBF)
In: Procedia CIRP, 96, 97-102, 2021 Authors and Contributors
Horstkotte, Rainer (Corresponding author)
Heinrich, Florian
Pr�mmer, Marcel
Arntz, Kristian
Bergs, Thomas
Source
[Contribution to a book, Journal Article]
The Influence of Former Process Steps on Changes in Hardness, Lattice and Micro Structure of AISI 4140 Due to Manufacturing Processes
In: Metals : open access journal, 11 (7), 1102, 2021
[DOI: 10.3390/met11071102] Authors and Contributors
Borchers, Florian
Clausen, Brigitte (Corresponding author)
Ehle, Lisa Christine
Eich, Marco
Epp, J�r�my
et al.
Source
[Journal Article]
Direct measurement of thermo-elastic errors of a machine tool
In: CIRP annals, manufacturing technology, 70 (1), 333-336, 2021
[DOI: 10.1016/j.cirp.2021.04.084] Authors and Contributors
Brecher, Christian (Corresponding author)
Spierling, Robert
Fey, Marcel
Neus, Stephan
Source
[Preprint]
Using Large-Scale Drone Data to Monitor and Assess the Behavior of Freight Vehicles on Urban Level, 2021
[DOI: 10.18154/RWTH-2021-07390] Authors and Contributors
Loder, Allister (Corresponding author)
Otte, Thomas
Bogenberger, Klaus
Source
[Contribution to a book, Contribution to a conference proceedings]
Embedding Active Asset Administration Shells in the Internet of Things using the Smart Systems Service Infrastructure
In: Proceedings : 2020 IEEE 18th International Conference on Industrial Informatics (INDIN) : Warwick, United Kingdom - Online, 21 - 23 July, 2020 / Organized by WMG, International Manufacturing Centre, University of Warwick, United Kingdom ; Sponsored by The Institute of Electrical and Electronics Engineers (IEEE), IEEE Industrial Electronics Society (IES), 23-28, 2020
[DOI: 10.1109/INDIN45582.2020.9442249] Authors and Contributors
Wein, Stephan (Corresponding author)
Fimmers, Christian
Storms, Simon
Brecher, Christian
Gebhard, Marlene (Corresponding author)
et al.
Source
[Contribution to a book, Journal Article]
Automating Laboratory Processes by Connecting Biotech and Robotic Devices—An Overview of the Current Challenges, Existing Solutions and Ongoing Developments
In: Processes : open access journal, 9 (6), 966, 2021
[DOI: 10.3390/pr9060966] Authors and Contributors
Biermann, Ferdinand
Mathews, Julius
Nie�ing, Bastian
K�nig, Niels
Schmitt, Robert H. (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Investigation of Failure Mechanisms of Cemented Carbide Fine Blanking Punches by Means of Process Forces and Acoustic Emission
In: Forming the Future : Proceedings of the 13th International Conference on the Technology of Plasticity / Glenn Daehn, Jian Cao, Brad Kinsey, Erman Tekkaya, Anupam Vivek, Yoshinori Yoshida Editors, 1173-1187, 2021
[DOI: 10.1007/978-3-030-75381-8_98] Authors and Contributors
Voigts, Herman Otto (Corresponding author)
Hild, Rafael
Feuerhack, Andreas
Bergs, Thomas
Source
[Journal Article]
Kornbruchverhalten beim Abrichten von CBN
In: wt Werkstattstechnik online, 111 (6), 408-413, 2021
[DOI: 10.37544/1436-4980-2021-06-52] Authors and Contributors
Ohlert, Marius (Corresponding author)
Prinz, Sebastian
Barth, Sebastian
Bergs, Thomas
Source
[Book]
Sustainable Innovation : Nachhaltig Werte schaffen, 2021
[DOI: 10.1007/978-3-662-61910-0] Authors and Contributors
Schuh, G�nther
D�lle, Christian (Corresponding author)
Source
[Journal Article]
Digital image correlation analysis and modelling of the strain rate in metal cutting
In: CIRP annals, manufacturing technology, 70 (1), 45-48, 2021
[DOI: 10.1016/j.cirp.2021.04.055] Authors and Contributors
Bergs, Thomas
Abouridouane, Mustapha (Corresponding author)
Meurer, Markus Joachim
Peng, Bingxiao
Source
[Book, Dissertation / PhD Thesis]
Method for optimizing the tool and process design for bevel gear plunging processes
In: Ergebnisse aus der Produktionstechnik 15/2021, 2021 Authors and Contributors
Mazak, Julia
Source
[Contribution to a conference proceedings, Journal Article]
Process design for gear shaping of austempered ductile iron (ADI) components
In: Procedia CIRP, 99, 214-219, 2021 Authors and Contributors
K�hn, Felix
Brimmers, Jens
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Investigation of the chip formation during hobbing by means of an analytical approach
In: Procedia CIRP, 99, 226-231, 2021 Authors and Contributors
Bergs, Thomas
Brimmers, Jens
Georgoussis, Adrianos
Kr�mer, Markus
Source
[Contribution to a conference proceedings, Journal Article]
Quantification of complexity in cyber-physical systems based on key figures
In: Procedia CIRP, 100, 445-450, 2021 Authors and Contributors
Riesener, Michael
D�lle, Christian
Keuper, Alexander
Fruntke, Marc
Schuh, G�nther
Source
[Contribution to a conference proceedings, Journal Article]
Quantification of complexity in cyber-physical systems based on key figures
In: Procedia CIRP, 100, 445-450, 2021
[DOI: 10.1016/j.procir.2021.05.102] Authors and Contributors
Riesener, Michael
D�lle, Christian
Keuper, Alexander (Corresponding author)
Fruntke, Marc
Schuh, G�nther
Source
[Contribution to a book, Contribution to a conference proceedings]
Die 4.0 Phasen der Gesch�ftsmodellinnovation: Entwicklung von Gesch�ftsmodellen als kontinuierlicher Verbesserungsprozess und F�rderung unternehmensinterner Open Innovation Projekte
In: Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz : 26. und 27. Mai 2021 in Jena / Prof. Dr. Kristin Mitte (Hrsg.), 325-329, 2021 Authors and Contributors
Baskaya, Sait (Corresponding author)
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Bindung und F�rderung von Nachwuchswissenschaftler*innen an deutschen Hochschulen
In: Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz : 26. und 27. Mai 2021 in Jena / Prof. Dr. Kristin Mitte (Hrsg.), 256-263, 2021 Authors and Contributors
Baskaya, Sait (Corresponding author)
Heine, Ina
Schmitt, Robert H.
Source
[Journal Article]
Automatisierte Konstruktion von Schwei�vorrichtungen im Karosseriebau
In: Konstruktion : Zeitschrift f�r Produktentwicklung und Ingenieur-Werkstoffe, 73 (3), 63-69, 2021
[DOI: 10.37544/0720-5953-2021-03-63] Authors and Contributors
Lichtenth�ler, Kolja
H�ltgen, Christian (Corresponding author)
Fiedler, Falko
Bergweiler, Georg
Source
[Book]
Die Produktionswende: Turning Data into Sustainability - Durch das Internet of Production zu nachhaltiger Produktion und Betrieb, 2021 Authors and Contributors
Boos, Wolfgang (Corresponding author)
Keysselitz, B�rbel (Redactor)
Strigl, Stefanie (Redactor)
Source
[Contribution to a conference proceedings, Journal Article]
Tool wear in dry gear hobbing of 20MnCr5 case-hardening steel, 42CrMo4 tempered steel and EN-GJS-700-2 cast iron
In: Wear : an international journal on the science and technology of friction, lubrication and wear, 63 (476), 203737, 2021
[DOI: 10.1016/j.wear.2021.203737] Authors and Contributors
Tro�, Nico (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings]
Experimental Investigation of Process Forces and Part Quality for Fine Blanking of Stainless Steel with Inductive Heating
In: ESAFORM 2021 - 24th International Conference on Material Forming, 2575/1-2575/11, 2021
[DOI: 10.25518/esaform21.2575] Authors and Contributors
Weiser, Ingo Felix (Corresponding author)
Mannens, Robby Norbert
Feuerhack, Andreas
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Investigation of the chip formation during hobbing by means of an analytical approach
In: Procedia CIRP, 99, 226-231, 2021
[DOI: 10.1016/j.procir.2021.03.033] Authors and Contributors
Bergs, Thomas
Brimmers, Jens
Georgoussis, Adrianos (Corresponding author)
Kr�mer, Markus
Source
[Contribution to a conference proceedings, Journal Article]
Process design for gear shaping of austempered ductile iron (ADI) components
In: Procedia CIRP, 99, 214-219, 2021
[DOI: 10.1016/j.procir.2021.03.098] Authors and Contributors
K�hn, Felix (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Calculation of the maximum chip thickness for a radial-axial infeed in gear hobbing
In: Procedia CIRP, 99, 232-236, 2021
[DOI: 10.1016/j.procir.2021.03.032] Authors and Contributors
Tro�, Nico (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Validation of the plane-based penetration calculation for gear skiving
In: Procedia CIRP, 99, 220-225, 2021
[DOI: 10.1016/j.procir.2021.03.034] Authors and Contributors
Jan�en, Christopher Maria (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Source
[Journal Article]
Investigation of the Micro Hardness at the Cut Surface of Fine Blanked Parts with Variation of Sheet Material and Cutting Temperature
In: Key engineering materials : KEM, 883, 269-276, 2021
[DOI: 10.4028/www.scientific.net/KEM.883.269] Authors and Contributors
Weiser, Ingo Felix (Corresponding author)
Feuerhack, Andreas
Bergs, Thomas
Source
[Journal Article]
Intelligente �berwachung von Werkzeugverschlei�: Datenanalyse in der Produktion basierend auf maschinen-internen Daten
In: wt Werkstattstechnik online, 111 (5), 309-313, 2021
[DOI: 10.37544/1436-4980-2021-05-43] Authors and Contributors
Brecher, Christian
Xi, Tiandong (Corresponding author)
Beninc�, Igor Medeiros
Kehne, Sebastian
Fey, Marcel
Source
[Journal Article]
Digitalisierung der KSS-Pflege f�r den Mittelstand : Entwicklung einer mobilen Einheit f�r die K�hlschmierstoffversorgung
In: wt Werkstattstechnik online, 111 (5), 314-318, 2021
[DOI: 10.37544/1436-4980-2021-05-48] Authors and Contributors
Dassen, Yannick (Corresponding author)
M�ller, Aleksandra
Brecher, Christian
R�ppel, Adrian K.
Bergs, Thomas
Source
[Journal Article]
Lastverteilungen in Kugelgewindetrieben
In: wt Werkstattstechnik online, 111 (5), 271-276, 2021
[DOI: 10.37544/1436-4980-2021-05-5] Authors and Contributors
Brecher, Christian
Biernat, Benedikt Markus Hubert (Corresponding author)
Neus, Stephan
Source
[Contribution to a book, Contribution to a conference proceedings]
Gaining IIoT insights by leveraging ontology-based modelling of raw data and Digital Shadows
In: 2021 4th IEEE International Conference on Industrial Cyber-Physical Systems (ICPS), 231-236, 2021
[DOI: 10.1109/ICPS49255.2021.9468116] Authors and Contributors
Brecher, Christian (Corresponding author)
Buchsbaum, Melanie Sarah Katharina (Corresponding author)
M�ller, Aleksandra (Corresponding author)
Schilling, Katrin Laura (Corresponding author)
Obdenbusch, Markus (Corresponding author)
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Effects of grinding wheel wear on the thermo-mechanical loads in the grinding process
In: MM Science journal, 2021 (July), ICTIMT2021-046, 2021
[DOI: 10.17973/MMSJ.2021_7_2021075] Authors and Contributors
Bredthauer, Marc (Corresponding author)
Bergs, Thomas
Barth, Sebastian
Mattfeld, Patrick-Marcel
Source
[Journal Article]
The tribology between monocrystalline diamond and polycrystalline cubic boron nitride during frictional contact
In: Journal of manufacturing processes, 68 (Part A), 1147-1157, 2021
[DOI: 10.1016/j.jmapro.2021.06.026] Authors and Contributors
M�ller, Ulrich Hermann (Corresponding author)
Kaiser, Josef
Barth, Sebastian
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Concept for an augmented intelligence-based quality assurance of assembly tasks in global value networks
In: Procedia CIRP, 97, 423-428, 2021 Authors and Contributors
Thamm, Sascha
Huebser, Louis
Adam, Tobias
Hellebrandt, Thomas Sven
Heine, Ina
et al.
Source
[Journal Article]
A priori performance assessment of line-less mobile assembly systems
In: CIRP annals, manufacturing technology, 70 (1), 389-392, 2021
[DOI: 10.1016/j.cirp.2021.04.059] Authors and Contributors
Schmitt, Robert H. (Corresponding author)
H�ttemann, Guido
M�nker, S�ren
Source
[Contribution to a book, Contribution to a conference proceedings]
Influence of pass reduction in cold rolling on damage evolution in deep drawing of rotationally symmetric cups
In: International Deep-Drawing Research Group Conference (IDDRG 2021) 21st June - 2nd July 2021, Stuttgart, Germany, 1-8, 2021
[DOI: 10.1088/1757-899X/1157/1/012050] Authors and Contributors
Nick, Matthias (Corresponding author)
Liebsch, Conrad
M�ller, Martina
Weiser, Ingo Felix
Hirt, Gerhard
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Concept for an augmented intelligence-based quality assurance of assembly tasks in global value networks
In: Procedia CIRP, 97, 423-428, 2021
[DOI: 10.1016/j.procir.2020.05.262] Authors and Contributors
Thamm, Sascha (Corresponding author)
Huebser, Louis
Adam, Tobias
Hellebrandt, Thomas Sven
Heine, Ina
et al.
Source
[Journal Article]
Zustandsmonitoring f�r angetriebene Werkzeuge
In: Maschinenmarkt : MM, 127 (7), 46-49, 2021 Authors and Contributors
Brecher, Christian
Neus, Stephan
Christoffers, Daniel (Corresponding author)
Source
[Journal Article]
Entwicklung eines Beveloidverspannungspr�fstandes
In: wt Werkstattstechnik online, 111 (5), 277-281, 2021
[DOI: 10.37544/1436-4980-2021-05-11] Authors and Contributors
Willecke, Marius (Corresponding author)
Brimmers, Jens
Brecher, Christian
Source
[Journal Article]
Reduction of the tonality of gear noise by application of topography scattering for ground bevel gears
In: Gear solutions, 2021 (May), 29-37, 2021 Authors and Contributors
Kasten, Marcel-Mich�l (Corresponding author)
Brecher, Christian
L�penhaus, Christoph
Lemmer, Andreas
Bl�se, Werner
et al.
Source
[Journal Article]
Modell zur Erweiterung der Auslegung von Kugelgewindetrieben unter mehrachsigen Lasten
In: Ingenieur-Forum : Forum f�r den Bergischen, Bochumer, Emscher-Lippe, Lenne, M�nsterl�nder, Osnabr�ck-Emsland und Westf�lischen VDI-Bezirksverein, 2021 (1), 20-22, 2021 Authors and Contributors
Brecher, Christian
Biernat, Benedikt Markus Hubert
Klimaschka, Ralph Bernhard
Neus, Stephan
Source
[Contribution to a conference proceedings, Journal Article]
Optimal Positioning Methods of Integral Deformation Sensors : Expert Knowledge Versus Mathematical Optimization
In: MM Science journal, 2021 (July), ICTIMT2021-036, 2021
[DOI: 10.17973/MMSJ.2021_7_2021069] Authors and Contributors
Brecher, Christian
Herzog, R.
Naumann, A.
Spierling, Robert (Corresponding author)
Tzanetos, F.
Source
[Contribution to a conference proceedings, Journal Article]
Modeling the cooling effect of the cutting fluid in machining using a coupled fe-cfd simulation
In: MM Science journal, 2021 (July), ICTIMT2021-019, 2021
[DOI: 10.17973/MMSJ.2021_7_2021062] Authors and Contributors
Liu, Hui (Corresponding author)
Helmig, Thorsten
Augspurger, Thorsten
Nhat, N.
Kneer, Reinhold
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Solving Transient Inverse Heat Transfer Problems in Complex Geometries Using Physics-guided Neural Networks (PGNN)
In: MM Science journal, ICTIMT2021-013, 2021
[DOI: 10.17973/MMSJ.2021_7_2021057] Authors and Contributors
Emonts, Dominik (Corresponding author)
Yang, J.
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Frequency-based Identification of the Inertial Parameters of an Industrial Robot
In: Production at the leading edge of technology : proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 / Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg editors, 429-438, 2020
[DOI: 10.1007/978-3-662-62138-7_43] Authors and Contributors
Gr�ndel, Lukas (Corresponding author)
Reiners, Carsten
Lienenl�ke, Lars
Storms, Simon
Brecher, Christian
et al.
Source
[Contribution to a conference proceedings, Journal Article]
A Novel Design Concept For A Thermally Stable Linear Scale Using Two Different Materials
In: MM Science journal, 2021 (July), ICTIMT2021-055, 2021
[DOI: 10.17973/MMSJ.2021_7_2021081] Authors and Contributors
Lee, T. H. (Corresponding author)
Gim, H.
Oh, S.
Gotthardt, T.
Tzanetos, F.
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Holarchy for line-less mobile assembly systems operation in the context of the internet of production
In: Procedia CIRP, 99, 448-453, 2021
[DOI: 10.1016/j.procir.2021.03.064] Authors and Contributors
Buckhorst, Armin Friedrich (Corresponding author)
Montavon, Benjamin Leendert
Wolfschl�ger, Dominik
Buchsbaum, Melanie Sarah Katharina
Shahidi, Seyed Amirreza
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Preventing Discrepancies Between Indicated Algorithmic Certainty and Actual Performance : An Experimental Solution
In: HCI International 2021 - Posters : 23rd HCI International Conference, HCII 2021, Virtual Event, July 24-29, 2021, Proceedings, Part I, 573-580, 2021
[DOI: 10.1007/978-3-030-78642-7_77] Authors and Contributors
Werz, Johanna Miriam (Corresponding author)
Z�hl, Konstantin
Borowski, Esther
Isenhardt, Ingrid
Source
[Book, Dissertation / PhD Thesis]
Augmenting collaboration : impact of augmented reality on collaborative problem-solving processes
In: Edition Wissenschaft Apprimus, 2021 Authors and Contributors
Schiffeler, Nina Maria
Source
[Abstract, Contribution to a conference proceedings]
The future of production: The RWTH Internet of Production Delphi 2030 for the usage cycle
In: Proceedings of the 18th International Open and User Innovation Conference : Book of Abstracts : RWTH Aachen University, Aachen, Germany, June 21-22, 2021 / Edited by Frank Piller, Patrick Pollok, and Kathleen Diener, OUI 2020+1 Conference Co-Chairs ; Organized by The Institute for Technology and Innovation Management, RWTH Aachen University, The Institute for Management Cybernetics IFU e.V., an RWTH affiliated Institute, 50-50, 2021 Authors and Contributors
van Dyck, Marc
Becker, Annika
Braun, Stefan
Brauner, Philipp
Brillowski, Florian Sascha
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Agile Hybrid Assembly Systems : Bridging the Gap Between Line and Matrix Configurations
In: Advances in Automotive Production Technology - Theory and Application : Stuttgart Conference on Automotive Production (SCAP2020), 3-11, 2021
[DOI: 10.1007/978-3-662-62962-8_1] Authors and Contributors
G�ppert, Mirko Robin Amon (Corresponding author)
Schukat, Esben
Burggr�f, Peter
Schmitt, Robert H.
Source
[Book, Dissertation / PhD Thesis]
Methodik zur Verbesserung der Transparenz und Steuerbarkeit der Produktkomplexit�t
In: Ergebnisse aus der Produktionstechnik 14/2021, 2021 Authors and Contributors
Koch, Jan Felix
Source
[Journal Article]
Measuring the Kinematic Behavior of the Rolling Elements in a Spindle Bearing under Axial and Radial Loads
In: Bearing world journal, 2020 (5), 159-167, 2021 Authors and Contributors
Brecher, Christian
Eckel, Hans-Martin (Corresponding author)
Fey, Marcel
Neus, Stephan
Source
[Patent]
Verfahren zur Kontaktierung der Batteriezellen eines Batteriemoduls und Batteriel�schvorrichtung daf�r, 2021 Authors and Contributors
Fiedler, Falko
Bergweiler, Georg
Bethlehem, S�ren
Source
[Contribution to a conference proceedings, Journal Article]
The influence of energy input characteristics on surface integrity in wire EDM
In: Procedia CIRP, 95, 268-272, 2021
[DOI: 10.1016/j.procir.2020.11.004] Authors and Contributors
Maradia, Umang (Corresponding author)
Filisetti, Eric
Wiessner, Moritz
Schneider, Sebastian
Boccadoro, Marco
Source
[Contribution to a conference proceedings, Journal Article]
Simulation Assisted Cathode Design for the Manufacturing of Complex Geometries by Electrochemical Machining (ECM)
In: Procedia CIRP, 95, 688-693, 2021
[DOI: 10.1016/j.procir.2020.02.298] Authors and Contributors
Bergs, Thomas
Heidemanns, Lukas Franz (Corresponding author)
Klink, Andreas
Source
[Contribution to a conference proceedings, Journal Article]
Experimental Investigation concerning the Influence of Electrochemical Machining on Process Chain induced Residual Stress States
In: Procedia CIRP, 95, 726-730, 2021
[DOI: 10.1016/j.procir.2020.01.170] Authors and Contributors
Bergs, Thomas
Rommes, B. (Corresponding author)
Kohls, E.
Meyer, H.
Klink, Andreas
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Experimental Analysis on Wire Electrical Discharge Machinability of Electrically Conductive Silicon Carbide and Nitride as Function of Different Oil-Based Dielectrics
In: Procedia CIRP, 95, 290-295, 2021
[DOI: 10.1016/j.procir.2020.01.165] Authors and Contributors
Bergs, Thomas
Olivier, Marcel Christoph (Corresponding author)
Herrig, Tim
Klink, Andreas
Source
[Contribution to a conference proceedings, Journal Article]
Energetic Characterization of Trim Cut Process Signals in Wire EDM
In: Procedia CIRP, 95, 262-267, 2021
[DOI: 10.1016/j.procir.2020.02.281] Authors and Contributors
Bergs, Thomas
Welschof, Lukas Gabriel
Herrig, Tim
Klink, Andreas
Source
[Contribution to a conference proceedings, Journal Article]
Simulation of the Evolutions in Real Microstructure of Material under Thermal Cycle with High Thermal Gradients
In: Procedia CIRP, 95, 238-243, 2021
[DOI: 10.1016/j.procir.2020.01.149] Authors and Contributors
Bergs, Thomas
Mohammadnejad, Mehnoush
He�, Dennis Raphael
Heidemanns, Lukas Franz
Klink, Andreas (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Investigation of Waterjet Phases on Material Removal Characteristics
In: Procedia CIRP, 95, 12-17, 2021
[DOI: 10.1016/j.procir.2020.02.319] Authors and Contributors
Bergs, Thomas
Sch�ler, M. (Corresponding author)
Dadgar, M.
Herrig, Tim
Klink, Andreas
Source
[Contribution to a conference proceedings, Journal Article]
Geometrical Analysis of Wire Electrochemical Machining for the Manufacture of Turbine Disc Slots
In: Procedia CIRP, 95, 694-699, 2021
[DOI: 10.1016/j.procir.2020.01.163] Authors and Contributors
Herrig, Tim (Corresponding author)
O�wald, K.
Lochmahr, I.
Klink, Andreas
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Evaluation of the Process Performance in Wire EDM Based on an Online Process Monitoring System
In: Procedia CIRP, 95, 360-365, 2021
[DOI: 10.1016/j.procir.2020.02.325] Authors and Contributors
K�pper, Ugur (Corresponding author)
Herrig, Tim
Klink, Andreas
Welling, D.
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Observation of EDM plasma behavior influenced by parasitic working gap capacitance
In: Procedia CIRP, 95, 189-194, 2021
[DOI: 10.1016/j.procir.2020.01.198] Authors and Contributors
Petersen, Timm (Corresponding author)
Ahmed, Shamraze
Kunieda, Masanori
Klink, Andreas
Source
[Contribution to a conference proceedings, Journal Article]
High Entropy Alloy machining by EDM and ECM
In: Procedia CIRP, 95, 178-182, 2021
[DOI: 10.1016/j.procir.2020.02.318] Authors and Contributors
Klink, Andreas (Corresponding author)
Harst, Simon Christoph
Olivier, Marcel Christoph
Tombul, Ugur
Bergs, Thomas
Source
[Journal Article]
Experimental analysis on vibratory finishing of cemented carbides
In: Manufacturing letters, 28, 21-24, 2021
[DOI: 10.1016/j.mfglet.2021.02.004] Authors and Contributors
Bergs, Thomas
M�ller, Ulrich (Corresponding author)
Barth, Sebastian
Ohlert, Marius
Source
[Contribution to a book, Journal Article]
Aerosolbildung beim Schleifen: Systematische Untersuchung des Einflusses der Viskosit�t und der Schleifscheibenumfangsgeschwindigkeit auf die Schleifnebelbildung
In: Forum Schneidwerkzeug- und Schleiftechnik, 34 (2), 32-36, 2021 Authors and Contributors
Kaufmann, Tobias
Niemietz, Philipp
Trauth, Daniel
Source
[Contribution to a book, Journal Article]
Daten souver�n nutzen: Wie Sie den Wert Ihrer Daten durch unternehmens�bergreifende Zusammenarbeit steigern
In: Forum Schneidwerkzeug- und Schleiftechnik, 34 (1), 40-43, 2021 Authors and Contributors
Kaufmann, Tobias (Corresponding author)
Trauth, Daniel
Source
[Contribution to a book, Contribution to a conference proceedings]
An Online-Tool for career planning of women in STEM : From research to application
In: Proceedings of the 2021 IEEE Global Engineering Education Conference (EDUCON) : date and venue 21-23 April, 2021, Vienna, Austria / Editors Thomas Klinger, Christian Kollmitzer, Andreas Pester / IEEE, IEEE Education Society, 1019-1025, 2021
[DOI: 10.1109/EDUCON46332.2021.9453922] Authors and Contributors
Werz, Johanna Miriam (Corresponding author)
Schmitt, Miriam (Corresponding author)
Borowski, Esther (Corresponding author)
Wilkesmann, Uwe (Corresponding author)
Isenhardt, Ingrid (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Data-driven decision support for process quality improvements
In: Procedia CIRP, 99, 313-318, 2021 Authors and Contributors
Buschmann, Daniel
Enslin, Chrismarie
Elser, Hannes
L�tticke, Daniel
Schmitt, Robert H.
Source
[Contribution to a conference proceedings, Journal Article]
Potentials of Bluetooth Low Energy Beacons for order tracing in single and small batch production
In: Procedia CIRP, 97, 202-210, 2021 Authors and Contributors
Elser, Hannes
Jongebloed, Philip
Buschmann, Daniel
Ellerich, Max
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Towards an Adaptive Production Chain for Sustainable Sheet-Metal Blanked Components
In: Production at the leading edge of technology : proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 / Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg editors, 34-44, 2020
[DOI: 10.1007/978-3-662-62138-7_4] Authors and Contributors
Niemietz, Philipp (Corresponding author)
Kaufmann, Tobias
Unterberg, Martin Christian
Trauth, Daniel
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Data-driven decision support for process quality improvements
In: Procedia CIRP, 99, 313-318, 2021
[DOI: 10.1016/j.procir.2021.03.047] Authors and Contributors
Buschmann, Daniel (Corresponding author)
Enslin, Chrismarie
Elser, Hannes
L�tticke, Daniel
Schmitt, Robert H.
Source
[Contribution to a conference proceedings, Journal Article]
Potentials of Bluetooth Low Energy Beacons for order tracing in single and small batch production
In: Procedia CIRP, 97, 202-210, 2021
[DOI: 10.1016/j.procir.2020.05.226] Authors and Contributors
Elser, Hannes (Corresponding author)
Jongebloed, Philip
Buschmann, Daniel
Ellerich, Max
Schmitt, Robert H.
Source
[Report]
Entwicklung angepasster Werkzeuge und Prozesse zur Steigerung der Produktivit�t und Prozesssicherheit beim Fr�sen bleifreier Kupferwerkstoffe : Schlussbericht zu IGF-Vorhaben Nr. 20029 N : Berichtszeitraum 01.07.2018 - 31.12.2020, 2021 Authors and Contributors
Baier, Stefan (Corresponding author)
Schraknepper, Daniel
Bergs, Thomas
Source
[Book, Dissertation / PhD Thesis]
Modellierung des Werkzeugverschlei�es bei der Quarzglasumformung
In: Ergebnisse aus der Produktionstechnik 16/2021, 2021 Authors and Contributors
Grunwald, Tim
Source
[Journal Article]
Manuelle Fehleraufnahme bei Mass Customization : Entwicklung eines Prozessmodells zur manuellen Fehlerdatenaufnahme in der Montage am Beispiel eines Nutzfahrzeugherstellers
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 116 (4), 188-192, 2021
[DOI: 10.1515/zwf-2021-0038] Authors and Contributors
Beckschulte, Sebastian (Corresponding author)
Kiesel, Raphael
Schmitt, Robert H.
Source
[Journal Article]
Five-Axis Machine Tool Volumetric and Geometric Error Reduction by Indirect Geometric Calibration and Lookup Tables
In: Journal of manufacturing science and engineering, 143 (7), 071013, 2021
[DOI: 10.1115/1.4049846] Authors and Contributors
Esmaeili, Sareh M. (Corresponding author)
Mayer, J. R. R.
Sanders, Mark Pascal
Dahlem, Jan Philipp
Xing, Kanglin
Source
[Journal Article]
On-Machine Measurements im Internet of Production
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 116 (4), 259-262, 2021
[DOI: 10.1515/zwf-2021-0037] Authors and Contributors
Sanders, Mark Pascal (Corresponding author)
Xi, Tiandong
Dahlem, Jan Philipp
Fey, Marcel
Schmitt, Robert H.
et al.
Source
[Journal Article]
Konzept und Anwendung Autonomer Industrie 4.0-Komponenten auf Basis Agenten-basierter Ans�tze
In: Automatisierungstechnik : AT, 69 (6), 430-441, 2021
[DOI: 10.1515/auto-2020-0117] Authors and Contributors
Wein, Stephan (Corresponding author)
Dassen, Yannick
Pallasch, Christoph Heinrich
Miny, Torben Heinz
Storms, Simon
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Automation technology as a key component of the Industry 4.0 production development path
In: The international journal of advanced manufacturing technology, 117 (7/8), 2287-2295, 2021
[DOI: 10.1007/s00170-021-07246-5] Authors and Contributors
Brecher, Christian
M�ller, Aleksandra (Corresponding author)
Dassen, Yannick
Storms, Simon
Source
[Journal Article]
Predicting performance indicators with ANNs for AI-based online scheduling in dynamically interconnected assembly systems
In: Production engineering, 15 (5), 619-633, 2021
[DOI: 10.1007/s11740-021-01057-z] Authors and Contributors
G�ppert, Mirko Robin Amon (Corresponding author)
Mohring, Leon
Schmitt, Robert H.
Source
[Contribution to a book, Journal Article]
Influence of the frequency of pulsating high-pressure cutting fluid jets on the resulting chip length and surface finish
In: The international journal of advanced manufacturing technology, 117 (7/8), 2185-2196, 2021
[DOI: 10.1007/s00170-021-07177-1] Authors and Contributors
Splettst��er, Antonia Maren (Corresponding author)
Schraknepper, Daniel
Bergs, Thomas
Source
[Abstract, Contribution to a conference proceedings, Journal Article]
The stemcellfactory : automated generation and expansion of human induced pluripotent stem cells
In: Cytotherapy : official journal of ISCT, 23 (5, Supplement), 1214, S167-S168, 2021
[DOI: 10.1016/S1465324921006423] Authors and Contributors
Nie�ing, B.
Breitkreuz, Y.
Elanzew, A.
Koenig, N.
Schmitt, Robert H.
et al.
Source
[Abstract, Contribution to a conference proceedings, Journal Article]
"Jointpromise" : concept of a multi-step, automated platform for precision manufacturing of joint implants
In: Cytotherapy : official journal of ISCT, 23 (5, Supplement), 24, S31-S31, 2021
[DOI: 10.1016/S1465324921002929] Authors and Contributors
Krieger, J.
Nie�ing, B.
Snowball, S.
Luyten, F.
Papantoniou, I.
et al.
Source
[Book]
Erfolgreich Senkerodieren im Werkzeugbau, 2021 Authors and Contributors
Boos, Wolfgang
Herrig, Tim
Klink, Andreas
Arntz, Kristian
Pr�mmer, Marcel
et al.
Source
[Journal Article]
Development of a modified cross-over hop test to reduce measurement errors in return-to-competition testing
In: Sportverletzung, Sportschaden, -, a-1349-5605, 2021
[DOI: 10.1055/a-1349-5605] Authors and Contributors
Lambert, Christophe (Corresponding author)
Lambert, Maxime
Ellermann, Andree
Wafaisade, Arasch
Buse, Christian
et al.
Source
[Journal Article]
Machine learning-based predictive modeling of contact heat transfer
In: International journal of heat and mass transfer, 174, 121300, 2021
[DOI: 10.1016/j.ijheatmasstransfer.2021.121300] Authors and Contributors
Vu, Anh Tuan (Corresponding author)
Gulati, Shrey
Vogel, Paul-Alexander
Grunwald, Tim
Bergs, Thomas
Source
[Book]
Organisation im Wandel - Perspektiven der Servicetransformation
In: KVD-Service-Studie ; 2021 2021, 2021 Authors and Contributors
Rix, Calvin
Schrank, Regina
Schuh, G�nther (Editor)
Stich, Volker (Editor)
Frank, Jana (Editor)
Source
[Contribution to a conference proceedings, Journal Article]
Assembly system design in captive offshoring : A semi-systematic review of literature
In: Procedia CIRP, 97, 313-318, 2021 Authors and Contributors
Burggr�f, Peter
Dannapfel, Matthias
Adlon, Tobias
M�ller, Katharina Maria
Source
[Journal Article]
Design optimization of multi-energy systems using mixed-integer linear programming: Which model complexity and level of detail is sufficient?
In: Energy conversion and management, 240, 114249, 2021
[DOI: 10.1016/j.enconman.2021.114249] Authors and Contributors
Wirtz, Marco (Corresponding author)
Hahn, Maria
Schreiber, Thomas Bruno
M�ller, Dirk
Source
[Contribution to a conference proceedings, Journal Article]
Classification of gear pitting damage using vibration measurements
In: Technisches Messen : tm, 88 (5), 282-293, 2021
[DOI: 10.1515/teme-2021-0010] Authors and Contributors
Grzeszkowski, Mateusz (Corresponding author)
Nowoisky, Sebastian
Scholzen, Philipp Alexander
Kappmeyer, Gregor
G�hmann, Clemens
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Towards a flexible process-independent meta-model for production data
In: Procedia CIRP, 99, 586-591, 2021 Authors and Contributors
Cramer, Simon Tristan
Hoffmann, Max
Schlegel, Peter
Kemmerling, Marco
Schmitt, Robert H.
Source
[Journal Article]
Automated stem cell production by bio-inspired control
In: CIRP journal of manufacturing science and technology : CIRP-JMST, 33, 369-379, 2021
[DOI: 10.1016/j.cirpj.2021.03.013] Authors and Contributors
Monostori, L�szl� (Corresponding author)
Cs�ji, Bal�zs Cs
Egri, P�ter
Kis, Kriszti�n B.
V�ncza, J�zsef
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Reflectometry-based investigation of temperature fields during dual-beam Laser Metal Deposition
In: Proceedings Volume. - 11677, SPIE LASE, 6-12 MARCH 2021 Laser 3D Manufacturing VIII / Editors: Bo Gu, Hongqiang Chen, Henry Helvajian, 9 Seiten + Presentation, 2021
[DOI: 10.1117/12.2576112] Authors and Contributors
Gipperich, Marius
Peters, Christian
Riepe, Jan
Day, Robin
Bergs, Thomas
Source
[Journal Article]
Data-Driven Technology Management Supported by Artificial Intelligence Solutions
In: Journal of Production Systems and Logistics, 1, 4, 2021
[DOI: 10.15488/10528] Authors and Contributors
Schuh, G�nther
Bo�meyer, Hans-J�rgen
Br�kling, Andr�
Source
[Contribution to a book, Journal Article]
Fully Automated Cultivation of Adipose-Derived Stem Cells in the StemCellDiscovery—A Robotic Laboratory for Small-Scale, High-Throughput Cell Production Including Deep Learning-Based Confluence Estimation
In: Processes : open access journal, 9 (4), 575, 2021
[DOI: 10.3390/pr9040575] Authors and Contributors
Ochs, Jelena
Biermann, Ferdinand
Piotrowski, Tobias
Erkens, Frederik
Nie�ing, Bastian
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Design of Tailored Subscription Business Models - A Guide for Machinery and Equipment Manufacturers
In: Production at the leading edge of technology : proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 / Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg editors, 717-727, 2020
[DOI: 10.1007/978-3-662-62138-7_72] Authors and Contributors
Liu, Yuan (Corresponding author)
G�tzlaff, Andreas
Cremer, Sven Alexander
Grbev, T.
Schuh, G�nther
Source
[Book, Dissertation / PhD Thesis]
A model-based approach to comprehensive risk management for medical devices, 2021
[DOI: 10.18154/RWTH-2021-04766] Authors and Contributors
Casta�o Reyes, Carmen Elizabeth
Source
[Book]
Wettbewerbsfaktor Resilienz : Handlungsfelder f�r den krisensicheren Werkzeugbau, 2021 Authors and Contributors
Boos, Wolfgang
Trauth, Daniel
Arntz, Kristian
Pr�mmer, Marcel
Niemietz, Philipp
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Towards a flexible process-independent meta-model for production data
In: Procedia CIRP, 99, 586-591, 2021
[DOI: 10.1016/j.procir.2021.03.112] Authors and Contributors
Cramer, Simon Tristan (Corresponding author)
Hoffmann, Max
Schlegel, Peter
Kemmerling, Marco
Schmitt, Robert H.
Source
[Contribution to a conference proceedings, Journal Article]
Adaptive assembly systems for enabling agile assembly : Empirical analysis focusing on cognitive worker assistance
In: Procedia CIRP, 97, 319-324, 2021 Authors and Contributors
Burggr�f, Peter
Dannapfel, Heinrich Matthias
Adlon, Tobias (Corresponding author)
F�hlisch, Nils
Source
[Book, Dissertation / PhD Thesis]
Disziplin�bergreifendes Framework zur Unterst�tzung des technischen Service an Produktionssystemen
In: Ergebnisse aus der Produktionstechnik 12/2021, 2021 Authors and Contributors
Feng, Juejing
Source
[Contribution to a conference proceedings, Journal Article]
Holarchy for line-less mobile assembly systems operation in the context of the internet of production
In: Procedia CIRP, 99, 448-453, 2021 Authors and Contributors
Buckhorst, Armin Friedrich (Corresponding author)
Montavon, Benjamin Leendert
Wolfschl�ger, Dominik
Buchsbaum, Melanie Sarah Katharina
Shahidi, Seyed Amirreza
et al.
Source
[Journal Article]
The Inclusion of End-of-Life Modeling in the Life Cycle Energy Optimization Methodology
In: Journal of mechanical design, 143 (5), 052002, 2020
[DOI: 10.1115/1.4048447] Authors and Contributors
Bouchouireb, Hamza (Corresponding author)
Jank, Merle-Hendrikje
O’Reilly, Ciar�n J.
G�ransson, Peter
Sch�ggl, Josef-Peter
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Organizational Agility in Development Networks
In: Production at the leading edge of technology : proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 / Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg editors, 621-630, 2020
[DOI: 10.1007/978-3-662-62138-7_62] Authors and Contributors
Kuhn, Maximilian (Corresponding author)
D�lle, Christian
Riesener, Michael
Schuh, G�nther
Source
[Journal Article]
Insights on the Influence of Surface Chemistry and Rim Zone Microstructure of 42CrMo4 on the Efficiency of ECM
In: Materials, 14 (9), 2132, 2021
[DOI: 10.3390/ma14092132] Authors and Contributors
Schupp, Alexander
Bey�, Oliver
Rommes, Bob
Klink, Andreas
Zander, Brita Daniela (Corresponding author)
Source
[Book, Dissertation / PhD Thesis]
Potentiale von Machine Learning Modellen zur Prognose von Lastg�ngen bei Fertigungsprozessen
In: Ergebnisse aus der Produktionstechnik 4/2021, 2021 Authors and Contributors
Ellerich, Max
Source
[Book, Dissertation / PhD Thesis]
Produktportfoliosteuerung mittels pr�skriptiver Datenanalyseverfahren
In: Ergebnisse aus der Produktionstechnik 11/2021, 2021 Authors and Contributors
Jank, Merle-Hendrikje
Source
[Book, Dissertation / PhD Thesis]
Analyse der �bertragbarkeit des Schr�gverzahnungspulsens auf den Laufversuch
In: Ergebnisse aus der Produktionstechnik 3/2021, 2021 Authors and Contributors
R�ngeler, Markus
Source
[Book, Dissertation / PhD Thesis]
Bewertung der patienteninduzierten Unsicherheit medizinischer Computertomografiemessungen zur Absch�tzung des Verletzungsrisikos
In: Ergebnisse aus der Produktionstechnik 8/2021, 2021 Authors and Contributors
Bredemann, Judith
Source
[Report]
Automation 2030: Zukunft gestalten, Szenarien und Empfehlungen, 2021 Authors and Contributors
Bauer, Klaus
Bedenbender, Heinz
Bettenhausen, Kurt Dirk
Bilgic, Attila
Grieb, Herbert
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Adaptive assembly systems for enabling agile assembly : Empirical analysis focusing on cognitive worker assistance
In: Procedia CIRP, 97, 319-324, 2021
[DOI: 10.1016/j.procir.2020.05.244] Authors and Contributors
Burggr�f, Peter
Dannapfel, Heinrich Matthias
Adlon, Tobias (Corresponding author)
F�hlisch, Nils
Source
[Contribution to a book, Contribution to a conference proceedings]
Integrated Factory Modelling : Enabling Dynamic Changes for the Factory of the Future at the Example of E.GO Mobile AG
In: Technologies for economic and functional lightweight design: Conference proceedings 2020, 69-81, 2021
[DOI: 10.1007/978-3-662-62924-6_7] Authors and Contributors
Burggr�f, Peter
Dannapfel, Matthias
Vierschilling, Seastian Patrick (Corresponding author)
Source
[Journal Article]
Digital press shops : Data of an online survey among press shop experts
In: Data in Brief, 35, 106880, 2021
[DOI: 10.1016/j.dib.2021.106880] Authors and Contributors
Gro�, Marius
Lichtenth�ler, Kolja (Corresponding author)
Bergweiler, Georg
Burggr�f, Peter
Source
[Contribution to a conference proceedings, Journal Article]
Assembly system design in captive offshoring : A semi-systematic review of literature
In: Procedia CIRP, 97, 313-318, 2021
[DOI: 10.1016/j.procir.2020.05.243] Authors and Contributors
Burggr�f, Peter
Dannapfel, Matthias
Adlon, Tobias
M�ller, Katharina Maria (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Systematization of Adaptation Needs in the Design of Global Production Networks
In: Production at the leading edge of technology : proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 / Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg editors, 650-659, 2020
[DOI: 10.1007/978-3-662-62138-7_65] Authors and Contributors
Rodemann, Niklas (Corresponding author)
Niederau, M.
Thomas, Katharina
G�tzlaff, Andreas
Schuh, G�nther
Source
[Contribution to a book, Contribution to a conference proceedings]
Complexity-Oriented Description of Cyber-Physical Systems
In: Production at the leading edge of technology : proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 / Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg editors, 602-610, 2020
[DOI: 10.1007/978-3-662-62138-7_60] Authors and Contributors
Keuper, Alexander (Corresponding author)
D�lle, Christian
Riesener, Michael
Schuh, G�nther
Source
[Contribution to a book, Contribution to a conference proceedings]
Structured Approach for Changing Designer’s Mindset Towards Additive Manufacturing: From Theory to Practice
In: Industrializing Additive Manufacturing : Proceedings of AMPA2020 / Mirko Meboldt, Christoph Klahn Editors, 17-25, 2020
[DOI: 10.1007/978-3-030-54334-1_2] Authors and Contributors
de Souza Melo, Gustavo Menezes (Corresponding author)
Lukas, Gerret (Corresponding author)
Willkomm, Johannes Wilhelm
Ziegler, Stephan
Schuh, G�nther
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Identification of Project-Related Context Factors for the Tailored Design of Hybrid Development Processes
In: Production at the leading edge of technology : proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 / Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg editors, 640-649, 2020
[DOI: 10.1007/978-3-662-62138-7_64] Authors and Contributors
Ays, Julian Leander (Corresponding author)
D�lle, Christian
Riesener, Michael
Schuh, G�nther
Source
[Contribution to a book, Contribution to a conference proceedings]
Determination of a Dedicated, Cost-Effective Agility in Manufacturing Networks
In: Production at the leading edge of technology : proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 / Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg editors, 699-706, 2020
[DOI: 10.1007/978-3-662-62138-7_70] Authors and Contributors
Ays, Julian Leander (Corresponding author)
G�tzlaff, Andreas
Thomas, Katharina
Berbecker, Frederik
Schuh, G�nther
Source
[Journal Article]
Oxide Formation during Transpassive Material Removal of Martensitic 42CrMo4 Steel by Electrochemical Machining
In: Materials, 14 (2), 402, 2021
[DOI: 10.3390/ma14020402] Authors and Contributors
Zander, Brita Daniela (Corresponding author)
Schupp, Alexander
Bey�, Oliver
Rommes, Bob
Klink, Andreas
Source
[Book, Dissertation / PhD Thesis]
Leistungsmessung des Fehlermanagementprozesses
In: Ergebnisse aus der Produktionstechnik 10/2021, 2021 Authors and Contributors
R��mann, Maximilian
Source
[Contribution to a conference proceedings, Journal Article]
Life cycle assessment for milling of Ti- and Ni-based alloy aero engine components
In: Procedia CIRP, 98, 625-630, 2021 Authors and Contributors
Bergs, Thomas
Gr�nebaum, Timm Christian (Corresponding author)
Fricke, Kilian
Barth, Sebastian
Ganser, Philipp
Source
[Contribution to a conference proceedings, Journal Article]
A concept for low-emission production using Distributed Ledger Technology
In: Procedia CIRP, 98, 619-624, 2021 Authors and Contributors
Mayer, Johannes (Corresponding author)
Niemietz, Philipp
Trauth, Daniel
Bergs, Thomas
Source
[Contribution to a book, Journal Article]
Potentials of Vitrified and Elastic Bonded Fine Grinding Worms in Continuous Generating Gear Grinding
In: Journal of manufacturing and materials processing, 5 (1), 4, 2021
[DOI: 10.3390/jmmp5010004] Authors and Contributors
Schrank, Maximilian G�nter (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Source
[Contribution to a book, Journal Article]
Investigation of Mechanical Loads Distribution for the Process of Generating Gear Grinding
In: Journal of manufacturing and materials processing, 5 (1), 13, 2021
[DOI: 10.3390/jmmp5010013] Authors and Contributors
de Oliveira Teixeira, Patricia (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
A concept for low-emission production using Distributed Ledger Technology
In: Procedia CIRP, 98, 619-624, 2021
[DOI: 10.1016/j.procir.2021.01.164] Authors and Contributors
Mayer, Johannes (Corresponding author)
Niemietz, Philipp
Trauth, Daniel
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Life cycle assessment for milling of Ti- and Ni-based alloy aero engine components
In: Procedia CIRP, 98, 625-630, 2021
[DOI: 10.1016/j.procir.2021.01.165] Authors and Contributors
Bergs, Thomas
Gr�nebaum, Timm Christian (Corresponding author)
Fricke, Kilian
Barth, Sebastian
Ganser, Philipp
Source
[Journal Article]
Efficient parameterization of thermo-elastic correction models for externally driven spindles
In: MM Science journal, 2021 (March), 4291-4298, 2021
[DOI: 10.17973/MMSJ.2021_03_2020076] Authors and Contributors
Brecher, Christian
Steinert, Alexander (Corresponding author)
Spierling, Robert
Neus, Stephan
Source
[Journal Article]
Design of economically-optimized manufacturing process sequences using cross-process models
In: CIRP journal of manufacturing science and technology : CIRP-JMST, 24 (33), 15-29, 2021
[DOI: 10.1016/j.cirpj.2021.02.008] Authors and Contributors
Beckers, Alexander (Corresponding author)
Stauder, Lars Niklas
Gr�nebaum, Timm Christian
Barth, Sebastian
Bergs, Thomas
Source
[Journal Article]
Adaptive design of manufacturing process sequences in case of short-term disruptions in the production process
In: Manufacturing letters, 27, 92-95, 2021
[DOI: 10.1016/j.mfglet.2021.01.004] Authors and Contributors
Bergs, Thomas
Stauder, Lars Niklas (Corresponding author)
Beckers, Alexander
Gr�nebaum, Timm Christian
Barth, Sebastian
Source
[Journal Article]
Verschlei�mechanismen von CBN-K�rnern : Untersuchungen zur Identifizierung und Quantifizierung von CBN-Korn-Verschlei�mechanismen
In: wt Werkstattstechnik online, 111 (1/2), 77-81, 2021
[DOI: 10.37544/1436-4980-2021-01-02-81] Authors and Contributors
Bergs, Thomas
Bredthauer, Marc (Corresponding author)
Mattfeld, Patrick-Marcel
Barth, Sebastian
Source
[Journal Article]
On the Application of the Particle Swarm Optimization to the Inverse Determination of Material Model Parameters for Cutting Simulations
In: Modelling : international open access journal of modelling in engineering science, 2 (1), 129-148, 2021
[DOI: 10.3390/modelling2010007] Authors and Contributors
Hardt, Marvin Yannick (Corresponding author)
Jayaramaiah, Deepak
Bergs, Thomas
Source
[Journal Article]
Standzeiterh�hung beim Feinschneiden durch den Einsatz von Hartmetallstempeln
In: Maschinenbau : die Deutschland-Ausgabe des Schweizer Industriemagaz, 50 (1), 8-13, 2021
[DOI: 10.1007/s44029-020-0005-9] Authors and Contributors
Voigts, Herman Otto (Corresponding author)
Feuerhack, Andreas
Bergs, Thomas
Source
[Journal Article]
Hartmetallstempel erh�hen Leistungsf�higkeit des Feinschneidens von hochfestem Stahlblech
In: Diamond business, 16 (76), 52-52, 2021 Authors and Contributors
Voigts, Herman Otto (Corresponding author)
Source
[Journal Article]
Agile ramp-up production as an advantage of highly iterative product development
In: Manufacturing letters, 27, 4-7, 2020
[DOI: 10.1016/j.mfglet.2020.09.010] Authors and Contributors
Bergs, Thomas
Apelt, Sebastian (Corresponding author)
Beckers, Alexander
Barth, Sebastian
Source
[Journal Article]
Tool wear monitoring in roughing and finishing processes based on machine internal data
In: The international journal of advanced manufacturing technology, 113 (11/12), 3543-3554, 2021
[DOI: 10.1007/s00170-021-06748-6] Authors and Contributors
Xi, Tiandong (Corresponding author)
Beninc�, Igor Medeiros
Kehne, Sebastian
Fey, Marcel
Brecher, Christian
Source
[Book, Dissertation / PhD Thesis]
Gestaltungsmodell f�r den vernetzten und synchronisierten Serienanlauf von Werkzeugen
In: Ergebnisse aus der Produktionstechnik 5, 2021 Authors and Contributors
Stracke, Felix Konstantin
Source
[Book, Dissertation / PhD Thesis]
Phase field simulation of microstructure evolutions in the heat affected zone of a spark-eroded workpiece
In: Ergebnisse aus der Produktionstechnik 9/2021, 2021 Authors and Contributors
Mohammadnejad, Mehnoush
Source
[Journal Article]
Decision basis for multi-directional path planning for post-processing reduction in material extrusion
In: Production engineering, 15 (3/4), 457-466, 2021
[DOI: 10.1007/s11740-021-01018-6] Authors and Contributors
Hohenstein, Steffen Niklas (Corresponding author)
Bergweiler, Georg
Lukas, Gerret
Kr�mer, Viktoria
Otten, Tobias
Source
[Journal Article]
Reducing mass while improving the operational behavior : form optimization of planetary gearbox housings
In: Forschung im Ingenieurwesen = Engineering research, 85 (2), 543-551, 2021
[DOI: 10.1007/s10010-021-00445-2] Authors and Contributors
Theling, Julian Anselm (Corresponding author)
Brimmers, Jens
Brecher, Christian
Source
[Journal Article]
Considering multiple process observables to determine material model parameters for FE-cutting simulations
In: The international journal of advanced manufacturing technology, 113 (11/12), 3419-3421, 2021
[DOI: 10.1007/s00170-021-06845-6] Authors and Contributors
Hardt, Marvin Yannick (Corresponding author)
Bergs, Thomas
Source
[Contribution to a book, Journal Article]
Techno-Economic Analysis of Automated iPSC Production
In: Processes : open access journal, 9 (2), 240, 2021
[DOI: 10.3390/pr9020240] Authors and Contributors
Nie�ing, Bastian
Kiesel, Raphael
Herbst, Laura Marie
Schmitt, Robert H. (Corresponding author)
Source
[Journal Article]
Untersuchungskonzept zum Einfluss hoher Dehnraten auf die Zahnfu�tragf�higkeit
In: Forschung im Ingenieurwesen = Engineering research, 85 (2), 501-516, 2021
[DOI: 10.1007/s10010-021-00440-7] Authors and Contributors
Trippe, Moritz Johannes (Corresponding author)
L�venich, Johannes Peter
Malinowski, Oscar
Brecher, Christian
Brimmers, Jens
et al.
Source
[Journal Article]
Experimentelle Untersuchung von Einflussgr��en auf das Rasselger�uschverhalten von Stirnr�dern
In: Forschung im Ingenieurwesen = Engineering research, 85 (2), 527-542, 2021
[DOI: 10.1007/s10010-021-00442-5] Authors and Contributors
Namhoff, Christian (Corresponding author)
Kasten, Marcel-Mich�l
Brimmers, Jens
Brecher, Christian
Source
[Journal Article]
A time series classification approach to non-destructive hardness testing using magnetic Barkhausen noise emission
In: Production engineering, 15, 509-517, 2021
[DOI: 10.1007/s11740-021-01034-6] Authors and Contributors
Unterberg, Martin Christian (Corresponding author)
Stanke, Joachim Patrick Thomas
Trauth, Daniel
Bergs, Thomas
Source
[Book, Dissertation / PhD Thesis]
Laserunterst�tztes Kragenziehen
In: Ergebnisse aus der Produktionstechnik 35/2020, 2021 Authors and Contributors
Storms, Thomas
Source
[Journal Article]
Effect of laser-plume interaction on part quality in multi-scanner Laser Powder Bed Fusion
In: Additive manufacturing, 38, 101810, 2020
[DOI: 10.1016/j.addma.2020.101810] Authors and Contributors
Tenbrock, Christian (Corresponding author)
Kelliger, Tobias
Praetzsch, Niklas
Ronge, Marcel
Jauer, Lucas
et al.
Source
[Book, Dissertation / PhD Thesis]
Gestaltungsmodell f�r qualit�tsorientierte Produktionsanl�ufe
In: Ergebnisse aus der Produktionstechnik 2/2021, 2021 Authors and Contributors
Ngo, Quoc Hao
Source
[Book, Dissertation / PhD Thesis]
Konfiguration der Reihenfolgeplanung f�r die Variantenflie�fertigung
In: Schriftenreihe Rationalisierung 178, 2021 Authors and Contributors
Schr�ter, Moritz
Source
[Contribution to a book, Contribution to a conference proceedings]
Manufacturing Control in Job Shop Environments with Reinforcement Learning
In: Proceedings of the 13th International Conference on Agents and Artificial Intelligence / editors: Ana Paula Rocha ; Luc Steels and Jaap van den Herik. - . Volume 1: Online, 04-06.02.2021, 589-597, 2021
[DOI: 10.5220/0010202405890597] Authors and Contributors
Samsonov, Vladimir (First author)
Kemmerling, Marco
Paegert, Maren
L�tticke, Daniel
Sauermann, Frederick Christian
et al.
Source
[Book, Dissertation / PhD Thesis]
Datenbasierte Informationsmodelle zur explorativen Analyse von Anlagenkonfigurationen
In: Ergebnisse aus der Produktionstechnik 1/2021, 2021 Authors and Contributors
T�nnes, Carl Christian
Source
[Book, Dissertation / PhD Thesis]
Simulationsbasierte Bewertung der H�ufigkeit von Planungsl�ufen in der Produktionsplanung und -steuerung
In: Schriftenreihe Rationalisierung 177, 2021 Authors and Contributors
Frey, Dominik
Source
[Contribution to a conference proceedings, Journal Article]
Generation and evaluation of automation concepts of additive process chains with Laser Powder Bed Fusion (L-PBF)
In: Procedia CIRP, 96, 97-102, 2021
[DOI: 10.1016/j.procir.2021.01.059] Authors and Contributors
Horstkotte, Rainer (Corresponding author)
Heinrich, Florian
Pr�mmer, Marcel
Arntz, Kristian
Bergs, Thomas
Source
[Book, Dissertation / PhD Thesis]
Model-based a priori analysis of line-less mobile assembly systems
In: Ergebnisse aus der Produktionstechnik 6/2021, 2021
[DOI: 10.18154/RWTH-2021-02011] Authors and Contributors
H�ttemann, Guido
Source
[Book, Dissertation / PhD Thesis]
Reifegradbasierte Gestaltung der Unternehmenskultur am Beispiel der Instandhaltung
In: Schriftenreihe Rationalisierung 176, 2021 Authors and Contributors
Frank, Jana
Source
[Journal Article]
Approach to the numerical modelling of the chip temperatures in single grain scratching
In: Production Engineering, 15 (3/4), 451-455, 2021
[DOI: 10.1007/s11740-021-01017-7] Authors and Contributors
Bergs, Thomas
R�ttger, Jannik (Corresponding author)
Barth, Sebastian
Prinz, Sebastian
Source
[Journal Article]
Uncovering the human evaluation of changeability for automated factory layout planning : an expert survey
In: Production engineering, 15 (3/4), 285-298, 2021
[DOI: 10.1007/s11740-020-01015-1] Authors and Contributors
Burggr�f, Peter
Dannapfel, Matthias
Hahn, Viviane (Corresponding author)
Preutenborbeck, Michael
Source
[Book, Dissertation / PhD Thesis]
Statistical testing for sufficient control chart performances based on short runs and small mixed batches
In: Ergebnisse aus der Produktionstechnik 7/2021, 2021
[DOI: 10.18154/RWTH-2021-01826] Authors and Contributors
Kostyszyn, Kevin Nikolai
Source
[Contribution to a book, Contribution to a conference proceedings]
Modeling of Contact Conditions and Local Load in Bevel Gear Grinding
In: Production at the leading edge of technology : proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 / Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg editors, 246-255, 2020
[DOI: 10.1007/978-3-662-62138-7_25] Authors and Contributors
Solf, Mareike (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings]
Influence of a Two-Cut-Strategy on Tool Wear in Gear Hobbing
In: Production at the leading edge of technology : proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 / Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg editors, 225-234, 2020
[DOI: 10.1007/978-3-662-62138-7_23] Authors and Contributors
Tro�, Nico (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings]
Binder Jetting : PM Gears in Small Production
In: DDMC2020 - Fraunhofer Direct Digital Manufacturing Conference : proceedings : Direct Digital Manufacturing Conference, Berlin, June 23, 2020 / Fraunhofer Generativ, 5 Seiten, 2021 Authors and Contributors
Bergs, Thomas
Brimmers, Jens
Klee, Lukas (Corresponding author)
Source
[Journal Article]
Achieving parametric transparency in model-based factory planning
In: Production engineering, 15 (1), 57-67, 2021
[DOI: 10.1007/s11740-020-01010-6] Authors and Contributors
Burggr�f, Peter
Bergs, Thomas
Dannapfel, Heinrich Matthias
Korff, Andreas
Ebade Esfahani, Matthias Aref (Corresponding author)
et al.
Source
[Journal Article]
Investigations on the Application of the Downhill-Simplex-Algorithm to the Inverse Determination of Material Model Parameters for FE-Machining Simulations
In: Simulation modelling practice and theory, 107, 102214, 2020
[DOI: 10.1016/j.simpat.2020.102214] Authors and Contributors
Hardt, Marvin Yannick (Corresponding author)
Schraknepper, Daniel
Bergs, Thomas
Source
[Journal Article]
Im Dreischritt zur sicheren Produktion : Bedarfsorientierte und effiziente IT-Sicherheitskonzepte f�r KMU
In: Qualit�t und Zuverl�ssigkeit : QZ, 66 (1), 40-42, 2021 Authors and Contributors
Heutmann, Timo
Schmitt, Robert H.
Source
[Journal Article]
WZL-Doppelpulsator - Analogiepr�fstand zur Erzeugung von Zahnflankenbr�chen bei gro�moduligen Gerad- und Schr�gverzahnungen
In: Forschung im Ingenieurwesen, 85 (1), 77-87, 2021
[DOI: 10.1007/s10010-020-00432-z] Authors and Contributors
Goergen, Fabian (Corresponding author)
Brecher, Christian
Brimmers, Jens
Source
[Journal Article]
Efficient joint identification and fluted segment modelling of shrink-fit tool assemblies by updating extended tool models
In: Production engineering, 15, 21-33, 2020
[DOI: 10.1007/s11740-020-00999-0] Authors and Contributors
Brecher, Christian
Chavan, Prateek Satish (Corresponding author)
Fey, Marcel
Source
[Journal Article]
Untersuchung der Detektierbarkeit von realen Spindellagersch�den mit Methoden nach VDI 3832 aus Feldr�ckl�ufern
In: Forschung im Ingenieurwesen, 85 (1), 57-65, 2020
[DOI: 10.1007/s10010-020-00431-0] Authors and Contributors
Brecher, Christian
Neus, Stephan
Christoffers, Daniel (Corresponding author)
Eckel, Hans-Martin
Source
[Contribution to a book, Journal Article]
Experimental Investigation of Dimensional Precision of Deep Drawn Cups Using Direct Polymer Additive Tooling
In: Journal of manufacturing and materials processing, 5 (1), 3, 2020
[DOI: 10.3390/jmmp5010003] Authors and Contributors
Bergweiler, Georg
Fiedler, Falko
Shaukat, Ahsan
L�ffler, Bernd Wolfgang (Corresponding author)
Source
[Journal Article]
Deep-learning-based multi-class segmentation for automated, non-invasive routine assessment of human pluripotent stem cell culture status
In: Computers in biology and medicine, 129, 104172, 2020
[DOI: 10.1016/j.compbiomed.2020.104172] Authors and Contributors
Piotrowski, Tobias (Corresponding author)
Rippel, Oliver
Elanzew, Andreas
Nie�ing, Bastian
Stucken, Sebastian
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Domain-Specific Language for Sensors in the Internet of Production
In: Production at the leading edge of technology : proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020 / Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg editors, 448-456, 2020
[DOI: 10.1007/978-3-662-62138-7_45] Authors and Contributors
Bodenbenner, Matthias Stefan (Corresponding author)
Sanders, Mark Pascal
Montavon, Benjamin Leendert
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Basic Requirements to Designing Collaborative Augmented Reality : Status Quo and First Insights to a User-Centered Didactic Concept
In: Cross reality and data science in engineering : proceedings of the 17th International Conference on Remote Engineering and Virtual Instrumentation / Michael E. Auer, Dominik May, editors, 246-259, 2020
[DOI: 10.1007/978-3-030-52575-0_20] Authors and Contributors
Schiffeler, Nina Maria (Corresponding author)
Varney, Valerie
Borowski, Esther
Isenhardt, Ingrid
Source
[Contribution to a book, Contribution to a conference proceedings]
Studie �ber morphologische Effekte bei der taktiken Messung von Bliks unter Verwendung digitaler Twins
In: S�chsisches Geometriesymposium 2020 : Tolerierung | Fertigung | Messtechnik | Daten ; Tagungsband / Sophie Gr�ger, Marco Wei�gerber (Hrsg.), 1 Online-Ressource, 2020 Authors and Contributors
Schmidt, �nderson
Schmitt, Robert H.
Peterek, Martin Joachim
Source
[Contribution to a conference proceedings]
Methodology and use of variant fields in Factory Planning
In: Proceedings of the Conference on Production Systems and Logistics : CPSL 2020 / P. Nyhuis, D. Herberger, M. H�bner (Hrsg.), 110-118, 2020
[DOI: 10.15488/9652] Authors and Contributors
Dannapfel, Matthias (Corresponding author)
Vierschilling, Sebastian Patrick
Becker, Florian (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Efficient FE-Modelling of the transient thermo elastic machine behaviour of 5-axes machine tools
In: Special Interest Group: Thermal Issues : 26th-27th February 2020, Laboratory for Machine Tools and Production Engineering (WZL) of RTWH Aachen, Aachen, Germany / European Society for Precision Engineering and Nanotechnology, 148-149, 2020 Authors and Contributors
Brecher, Christian
Neus, Stephan
Dehn, Mathias Carsten (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Exzenter-Zykloiden-Verzahnungen
In: Innovationen rund ums Kegelrad 18.-19. M�rz 2020, 97-108, 2020 Authors and Contributors
Brecher, Christian
Brimmers, Jens
Westphal, Christian Michael
Landler, Stefan
Source
[Contribution to a book, Contribution to a conference proceedings]
Small Series Production and Geometric Analysis of Sheet Metal Car Body Parts Using Forming Tools Made of Fused Filament Fabricated PLA
In: IEEE IEEM virtual : 2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : 14-17 December 2020 / organizers: IEEE Singapore Section, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 156-160, 2020
[DOI: 10.1109/IEEM45057.2020.9309936] Authors and Contributors
Schuh, G�nther
Bergweiler, Georg
Fiedler, Falko
Bickendorf, Philipp (Corresponding author)
Schumacher, Philipp
Source
[Contribution to a book]
Internet of Production (IoP)
In: KI-Kompass f�r Entscheider : K�nstliche Intelligenz in der Industrie: Strategien - Potenziale - Use Cases / Ulrich Sendler, 265-272, 2020
[DOI: 10.3139/9783446465909.013] Authors and Contributors
D�lle, Christian
Perau, Stefan (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
The Semantic Web in the Internet of Production: A Strategic Approach with Use-Case Examples
In: SEMAPRO 2020 : the Fourteenth International Conference on Advances in Semantic Processing : October 25-29, 2020 / IARIA ; SEMAPRO 2020 editors: Tim vor der Br�ck, FFHS, Lucerne University of Applied Sciences and Arts, Switzerland, 68-72, 2020 Authors and Contributors
Theissen-Lipp, Johannes (Corresponding author)
Schilling, Katrin Laura (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Investigation of the Potential of Using Surrogate Models in the Gear Design Process
In: International Conference on Gears 2019, 3rd International Conference on High Performance Plastic Gears 2019, 3rd International Conference on Gear Production 2019 : Garching / Munich, Germany September 18 - 20, 2019 / VDI-Society for Product and Process Design, 2020 Authors and Contributors
Scholzen, Philipp Alexander
Billenstein, Daniel
Hammerl, Georg
L�penhaus, Christoph
Glenk, Christian
et al.
Source
[Contribution to a conference proceedings]
Design and Manufacturing Strategy of a Back-to-Back Test Rig for Investigation of Ultra High Cycle Fatigue Strength Regarding Tooth Root Strength in Aerospace Applications
In: Proceedings of the Machining Innovations Conference for Aerospace Industry (MIC) 2021, 78-85, 2020
[DOI: 10.2139/ssrn.3724213] Authors and Contributors
L�venich, Johannes Peter (Corresponding author)
Trippe, Moritz Johannes
Brimmers, Jens
Brecher, Christian
Stark, Sebastian
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Analysis of the Operational Behavior of a High-Speed Planetary Gear Stage for Electric Heavy-Duty Trucks in Multi-Body Simulation
In: Fall Technical Meeting AGMA 2020, October 2020, 10-1-10-15, 2020 Authors and Contributors
Westphal, Christian Michael (Corresponding author)
Brimmers, Jens
Brecher, Christian
Source
[Journal Article]
Informationsaufbereitung f�r Smart Devices : Verdichtung von Informationen f�r den Einsatz von Werkerassistenzsystemen in der Produktion
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 115 (5), 283-285, 2020
[DOI: 10.3139/104.112275] Authors and Contributors
Brandst�tter, Tobias Claus
Lossie, Karl
Schmitt, Robert H.
Source
[Journal Article]
Lastverteilung in Planetenrollengewindetrieben
In: wt Werkstattstechnik online, 110 (5), 322-327, 2020
[DOI: 10.37544/1436-4980-2020-05-54] Authors and Contributors
Brecher, Christian
Frenken, Thomas (Corresponding author)
Axelrad, Gabriel (Corresponding author)
Neus, Stephan
Source
[Journal Article]
Ganzheitliche Energieeffizienz in Produktionsst�tten : durch pr�diktive und kombinierte Regelung von Produktion und Peripherie
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 115 (5), 331-334, 2020
[DOI: 10.3139/104.112294] Authors and Contributors
Schmitt, Robert H.
Zhou, Beiyan
Source
[Journal Article]
Die Zukunft gestalten. 5G bietet neue M�glichkeiten f�r die Qualit�tssicherung
In: Qualit�t und Zuverl�ssigkeit, 65 (11), 50-53, 2020 Authors and Contributors
Schmitt, Sarah
K�nig, Niels
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Integrated Human-Centered Performance Management on the Shop Floor
In: Advances in human factors, business management and leadership : proceedings of the AHFE 2020 Virtual Conferences on Human Factors, Business Management and Society, and Human Factors in Management and Leadership, July 16-20, 2020, USA / Jussi Ilari Kantola, Salman Nazir, Vesa Salminen, editors, 584-591, 2020
[DOI: 10.1007/978-3-030-50791-6_75] Authors and Contributors
Hellebrandt, Thomas Sven (Corresponding author)
Ohlig, Jasmin
Poetters, Patrick
Heine, Ina
Leyendecker, Bert
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Identification and Characterization of Challenges in the Future of Manufacturing for the Application of Machine Learning
In: 2020 61st International Scientific Conference on Information Technology and Management Science of Riga Technical University (ITMS) : proceedings : October 15-16, 2020, Riga, Latvia / edited by: Janis Grabis, Andrejs Romanovs, Galina Kulesova ; organized by: Riga Technical University, IEEE Latvia Section, Information Technology Institute of RTU ; publisher: IEEE, 10 Seiten, 2020
[DOI: 10.1109/ITMS51158.2020.9259318] Authors and Contributors
Schuh, G�nther (Corresponding author)
Scholz, Paul (Corresponding author)
Nadicksbernd, Maximilian (Corresponding author)
Source
[Contribution to a book, Journal Article]
Quantification of economic potential of 5G for latency critical applications in production
In: Procedia manufacturing, 52, 113-120, 2020
[DOI: 10.1016/j.promfg.2020.11.021] Authors and Contributors
Kiesel, Raphael (Corresponding author)
van Roessel, Johannes
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Identifying and Analyzing Data Model Requirements and Technology Potentials of Machine Learning Systems in the Manufacturing Industry of the Future
In: 2020 61st International Scientific Conference on Information Technology and Management Science of Riga Technical University (ITMS) : proceedings : October 15-16, 2020, Riga, Latvia / edited by: Janis Grabis, Andrejs Romanovs, Galina Kulesova ; organized by: Riga Technical University, IEEE Latvia Section, Information Technology Institute of RTU ; publisher: IEEE, 2020
[DOI: 10.1109/ITMS51158.2020.9259303] Authors and Contributors
Schuh, G�nther
Scholz, Paul
Leich, Thomas
May, Richard
Source
[Book]
Angedacht
In: Angedacht, 2020, 74 Seiten : Illustrationen, 2020 Authors and Contributors
Hopmann, Christian (Editor)
Isenhardt, Ingrid (Editor)
Hees, Frank (Editor)
Neli�en, Nicole (Redactor)
Source
[Contribution to a book, Journal Article]
E-Schrott �konomisch aufbereiten
In: Recycling Magazin, 75 (Sonderheft), 6-7, 2020 Authors and Contributors
Kiesel, Raphael
Schmitt, Robert H.
Kies, Alexander
Source
[Book, Report]
Cybersecurity in der vernetzten Produktion : Whitepaper, 2020
[DOI: 10.24406/ipt-n-605817] Authors and Contributors
Kiesel, Raphael
Heutmann, Timo
Dering, Jan
Kies, Alexander
Vollmer, Thomas (Corresponding author)
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Digital Shadows as an Enabler for the Internet of Production
In: Advances in Production Management Systems : The Path to Digital Transformation and Innovation of Production Management Systems : IFIP WG 5.7 International Conference, APMS 2020, Novi Sad, Serbia, August 30 - September 3, 2020, Proceedings, Part I / Editors: Bojan Lalic, Vidosav Majstorovic, Ugljesa Marjanovic, Gregor von Cieminski, David Romero, 179-186, 2020
[DOI: 10.1007/978-3-030-57993-7_21] Authors and Contributors
Schuh, G�nther
G�tzlaff, Andreas
Sauermann, Frederick Christian
Maibaum, Judith (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Experimental investigations on the influence of temperature for Laser Metal Deposition with lateral Inconel 718 wire feeding
In: Procedia CIRP, 94, 29-34, 2020 Authors and Contributors
Bergs, Thomas
Kammann, Sebastian (Corresponding author)
Fraga, Gabriel
Riepe, Jan
Arntz, Kristian
Source
[Contribution to a conference proceedings, Journal Article]
Adaptive process monitoring for laser micro structuring of electrical steel using Optical Coherence Tomography with non-colour corrected lenses
In: Procedia CIRP, 94, 748-752, 2020 Authors and Contributors
Zechel, Fabian (Corresponding author)
Kunze, Rouwen
Widmann, Patrick
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Towards a Comparative Data Value Assessment Framework for Smart Product Service Systems
In: Advances in Production Management Systems. Towards Smart and Digital Manufacturing : IFIP WG 5.7 International Conference, APMS 2020, Novi Sad, Serbia, August 30 - September 3, 2020, Proceedings, Part II / edited by Bojan Lalic, Vidosav Majstorovic, Ugljesa Marjanovic, Gregor von Cieminski, David Romero, 330-337, 2020
[DOI: 10.1007/978-3-030-57997-5_39] Authors and Contributors
Holst, Lennard (Corresponding author)
Stich, Volker
Schuh, G�nther
Frank, Jana
Source
[Contribution to a conference proceedings, Journal Article]
Automated scenario analysis of reinforcement learning controlled line-less assembly systems
In: Procedia CIRP, 93, 1091-1096, 2020 Authors and Contributors
G�ppert, Mirko Robin Amon (Corresponding author)
Rachner, Jonas Sebastian
Schmitt, Robert H.
Source
[Journal Article]
Influence of the Contact Conditions in Cold Rolling on the Density Profile of Powder Metallurgical (PM) Gears
In: Gear technology, 37 (4), 50-54, 2020 Authors and Contributors
Frech, Tim (Corresponding author)
L�penhaus, Christoph
Klocke, Fritz
Source
[Contribution to a conference proceedings, Journal Article]
Consolidation of product lifecycle information within human-robot collaboration for assembly of multi-variant products
In: Procedia manufacturing (49), 217-221, 2020 Authors and Contributors
R�ckert, Patrick
Tracht, Kirsten
Herfs, Werner
Roggendorf, Simon
Schubert, Viktor
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Global Reference System for factory-wide integration of metrology enabling flexible automation in aeroplane assembly - requirements, concept and suitable technologies
In: Procedia manufacturing, 52, 89-94, 2020 Authors and Contributors
Nicksch, Christoph (Corresponding author)
Kluge-Wilkes, Aline Chantal
Huber, Meike
Schmitt, Robert H.
Source
[Contribution to a conference proceedings]
Potenziale des additive Manufacturing und werkstoffspezifischer KSS Zufuhr beim Fr�sen
In: Praxisforum Fr�sen Drehen Bohren : Innovationen in der spanenden Fertigung : 19. und 20. November 2019 in Neu-Ulm / Tagungsleitung und Fachbeirat: Professor Dr.-Ing. Michael Kaufeld, Dipl. Ing. Rainer Fritsch, Dr. Frank Jungblut, Dr. Niklas Kramer, Frank Pfeiffer, Professor Dr. h. c. Dr.-Ing. Eckart Uhlmann, 2020 Authors and Contributors
Lakner, Thomas (Corresponding author)
Bergs, Thomas
Schraknepper, Daniel
Seimann, M.
Koch, Matthias
Source
[Contribution to a conference proceedings]
Voltage- and Current-Measurement Based Force Estimation in Broaching Using Synchronous Motor Drive
In: Proceedings of the Machining Innovations Conference (MIC) 2020, 48-54, 2020
[DOI: 10.2139/ssrn.3724102] Authors and Contributors
Miura, Kazumasa (Corresponding author)
Seelbach, Tobias Markus
Augspurger, Thorsten
Schraknepper, Daniel
Bergs, Thomas
Source
[Book]
Distributed Ledger Technologien im Rheinischen Revier in Nordrhein-Westfalen - Produzierende Industrie 2020, 2020 Authors and Contributors
Trauth, Daniel
Niemietz, Philipp
Mayer, Johannes
Beckers, Alexander
Prinz, Wolfgang
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Tooth Root Testing of Steels with High Cleanliness
In: American Gear Manufacturers Association Fall Technical Meeting 2019 : Detroit, Michigan, USA, 14-16 October 2019, 192-207, 2020 Authors and Contributors
Trippe, Moritz Johannes
L�penhaus, Christoph
Brecher, Christian
Kamjou, Lily
L�thman, Elias
Source
[Contribution to a conference proceedings, Journal Article]
Consolidation of product lifecycle information within human-robot collaboration for assembly of multi-variant products
In: Procedia manufacturing (49), 217-221, 2020
[DOI: 10.1016/j.promfg.2020.07.022] Authors and Contributors
R�ckert, Patrick (Corresponding author)
Tracht, Kirsten
Herfs, Werner
Roggendorf, Simon
Schubert, Viktor
et al.
Source
[Journal Article]
Test di fatica a piede dente su acciai a elevato grado di purezza
In: Organi di trasmissione, 50 (6), 30-37, 2020 Authors and Contributors
Trippe, Moritz Johannes (Corresponding author)
L�penhaus, Christoph
Brecher, Christian
Kamjou, Lily
L�thman, Elias (Corresponding author)
Source
[Journal Article]
Tooth Root Testing of Steels with high cleanliness
In: Gear solutions, 2020 (7), 28-36, 2020 Authors and Contributors
Trippe, Moritz Johannes (Corresponding author)
L�penhaus, Christoph
Brecher, Christian
Kamjou, Lily
L�thman, Elias
Source
[Journal Article]
Methodik f�r roboterbasierte Produkttransporte: Dynamische Pfadplanung f�r modulare Anlagen
In: wt Werkstattstechnik online, 110 (05), 328-332, 2020
[DOI: 10.37544/1436-4980-2020-05-60] Authors and Contributors
Pieske, Simon
Blanke, Philipp
Hoffmann, Nicolai
Storms, Simon
Herfs, Werner
Source
[Contribution to a conference proceedings, Journal Article]
Hybrid approach to agile assembly planning - Empirical evaluation of the industrial practice
In: Procedia CIRP, 93, 1170-1175, 2020
[DOI: 10.1016/j.procir.2020.02.140] Authors and Contributors
Burggr�f, Peter
Dannapfel, Heinrich Matthias
Adlon, Tobias
F�lling, Carsten (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Applying Supervised and Reinforcement Learning to Design Product Portfolios in Accordance with Corporate Goals
In: Procedia CIRP, 91, 127-133, 2020
[DOI: 10.1016/j.procir.2020.02.157] Authors and Contributors
Riesner, Michael
D�lle, Christian
Dierkes, Christopher
Jank, Merle-Hendrikje (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Flexible Production Concept of a Low-Cost Battery Pack Housing for Electric Vehicles
In: Procedia CIRP, 93, 137-142, 2020
[DOI: 10.1016/j.procir.2020.04.038] Authors and Contributors
Schuh, G�nther
Bergweiler, Georg
Fiedler, Falko (Corresponding author)
Koltermann, Marcel
Source
[Contribution to a conference proceedings, Journal Article]
Feasibility and Process capability of polymer additive injection molds with slide technology
In: Procedia CIRP, 93, 102-107, 2020
[DOI: 10.1016/j.procir.2020.03.057] Authors and Contributors
Schuh, G�nther
Bergweiler, Georg
Lukas, Gerret
Abrams, Josef Andrew (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Capability-based assembly design: An approach for planning an agile assembly system in automotive industry
In: Procedia CIRP, 93, 1206-1211, 2020
[DOI: 10.1016/j.procir.2020.03.079] Authors and Contributors
Burggr�f, Peter
Dannapfel, Heinrich Matthias (Corresponding author)
Adlon, Tobias
Kahmann, Hannes (Corresponding author)
Schukat, Esben
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Application of time series data mining for the prediction of transition times in production
In: Procedia CIRP, 93, 897-902, 2020
[DOI: 10.1016/j.procir.2020.04.054] Authors and Contributors
Schuh, G�nther
G�tzlaff, Andreas (Corresponding author)
Sauermann, Frederick Christian
Theunissen, Theresa
Source
[Contribution to a conference proceedings, Journal Article]
Databased prediction and planning of order-specific transition times
In: Procedia CIRP, 93, 885-890, 2020
[DOI: 10.1016/j.procir.2020.04.026] Authors and Contributors
Schuh, G�nther
G�tzlaff, Andreas
Sauermann, Frederick Christian (Corresponding author)
Kaul, Oiver
Klein, Nicolas
Source
[Contribution to a conference proceedings, Journal Article]
Towards Temperature Control Measures for Polymer Additive Injection Molds
In: Procedia CIRP, 93, 90-95, 2020
[DOI: 10.1016/j.procir.2020.03.050] Authors and Contributors
Schuh, G�nther
Bergweiler, Georg
Lukas, Gerret (Corresponding author)
Oly, Matthias
Source
[Contribution to a conference proceedings, Journal Article]
Topology Optimisation and Metal Based Additive Manufacturing of Welding Jig Elements
In: Procedia CIRP, 93, 62-67, 2020
[DOI: 10.1016/j.procir.2020.04.066] Authors and Contributors
Schuh, G�nther
Bergweiler, Georg
Lichtenth�ler, Kolja (Corresponding author)
Fiedler, Falko
de la Puente Rebollo, Sergio
Source
[Contribution to a conference proceedings, Journal Article]
Modeling and evaluating agile assembly systems using mixed-integer linear programming
In: Procedia CIRP, 93, 1073-1078, 2020
[DOI: 10.1016/j.procir.2020.04.072] Authors and Contributors
Burggr�f, Peter
Dannapfel, Heinrich Matthias
Adlon, Tobias
Schukat, Esben (Corresponding author)
Kahmann, Hannes
et al.
Source
[Contribution to a conference proceedings, Journal Article]
High Entropy Alloy machining by EDM and ECM
In: Procedia CIRP, 95, 178-182, 2020 Authors and Contributors
Klink, Andreas
Harst, Simon Christoph
Olivier, Marcel Christoph
Tombul, Ugur
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Sheet Metal Forming Using Additively Manufactured Polymer Tools
In: Procedia CIRP, 93, 20-25, 2020
[DOI: 10.1016/j.procir.2020.04.013] Authors and Contributors
Schuh, G�nther
Bergweiler, Georg
Bickendorf, Philipp (Corresponding author)
Fiedler, Falko
Colag, Can
Source
[Contribution to a conference proceedings, Journal Article]
Adaptive remanufacturing for lifecycle optimization of connected production resources - A literature review
In: Procedia CIRP, 90, 61-66, 2020
[DOI: 10.1016/j.procir.2020.01.054] Authors and Contributors
Burggr�f, Peter
Wagner, Johannes
Dannapfel, Heinrich Matthias
Adlon, Tobias
Sa�mannshausen, Till
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Methodology for the implementation of subscription models in machinery and plant engineering
In: Procedia CIRP, 90, 730-735, 2020
[DOI: 10.1016/j.procir.2020.01.131] Authors and Contributors
Riesener, Michael
D�lle, Christian
Ebi, Manuel (Corresponding author)
Perau, Stefan
Source
[Contribution to a conference proceedings, Journal Article]
Observation of EDM plasma behavior influenced by parasitic working gap capacitance
In: Procedia CIRP, 95, 189-194, 2020 Authors and Contributors
Petersen, Timm
Ahmed, Shamraze
Kunieda, Masanori
Klink, Andreas
Source
[Contribution to a conference proceedings, Journal Article]
Evaluation of the Process Performance in Wire EDM Based on an Online Process Monitoring System
In: Procedia CIRP, 95, 360-365, 2020 Authors and Contributors
K�pper, Ugur
Herrig, Tim
Klink, Andreas
Welling, D.
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Geometrical Analysis of Wire Electrochemical Machining for the Manufacture of Turbine Disc Slots
In: Procedia CIRP, 95, 694-699, 2020 Authors and Contributors
Herrig, Tim
O�wald, K.
Lochmahr, I.
Klink, Andreas
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Investigation of Waterjet Phases on Material Removal Characteristics
In: Procedia CIRP, 95, 12-17, 2020 Authors and Contributors
Bergs, Thomas
Sch�ler, M.
Dadgar, M.
Herrig, Tim
Klink, Andreas
Source
[Contribution to a conference proceedings, Journal Article]
Identification of evaluation criteria for algorithms used within the context of product development
In: Procedia CIRP, 91, 508-515, 2020
[DOI: 10.1016/j.procir.2020.02.207] Authors and Contributors
Riesener, Michael
D�lle, Christian
Mendl-Heinisch, Michael Otto (Corresponding author)
Klumpen, Niclas
Source
[Contribution to a conference proceedings, Journal Article]
Simulation of the Evolutions in Real Microstructure of Material under Thermal Cycle with High Thermal Gradients
In: Procedia CIRP, 95, 238-243, 2020 Authors and Contributors
Bergs, Thomas
Mohammadnejad, Mehnoush
He�, Dennis Raphael
Heidemanns, Lukas Franz
Klink, Andreas
Source
[Contribution to a conference proceedings, Journal Article]
Energetic Characterization of Trim Cut Process Signals in Wire EDM
In: Procedia CIRP, 95, 262-267, 2020 Authors and Contributors
Bergs, Thomas
Welschof, Lukas Gabriel
Herrig, Tim
Klink, Andreas
Source
[Contribution to a conference proceedings, Journal Article]
Experimental Analysis on Wire Electrical Discharge Machinability of Electrically Conductive Silicon Carbide and Nitride as Function of Different Oil-Based Dielectrics
In: Procedia CIRP, 95, 290-295, 2020 Authors and Contributors
Bergs, Thomas
Olivier, Marcel Christoph
Herrig, Tim
Klink, Andreas
Source
[Contribution to a conference proceedings, Journal Article]
Experimental Investigation concerning the Influence of Electrochemical Machining on Process Chain induced Residual Stress States
In: Procedia CIRP, 95, 726-730, 2020 Authors and Contributors
Bergs, Thomas
Rommes, B.
Kohls, E.
Meyer, H.
Klink, Andreas
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Simulation Assisted Cathode Design for the Manufacturing of Complex Geometries by Electrochemical Machining (ECM)
In: Procedia CIRP, 95, 688-693, 2020 Authors and Contributors
Bergs, Thomas
Heidemanns, Lukas Franz (Corresponding author)
Klink, Andreas
Source
[Contribution to a conference proceedings, Journal Article]
The influence of energy input characteristics on surface integrity in wire EDM
In: Procedia CIRP, 95, 268-272, 2020 Authors and Contributors
Maradia, Umang
Filisetti, Eric
Wiessner, Moritz
Schneider, Sebastian
Boccadoro, Marco
Source
[Contribution to a book, Journal Article]
Influence of Planet Carrier Misalignments on the Operational Behavior of Planetary Gearboxes
In: Gear technology, 37 (5), 46-55, 2020 Authors and Contributors
Brecher, Christian
L�penhaus, Christoph
Theling, Julian Anselm (Corresponding author)
Source
[Journal Article]
Prozess-Empowerment durch Handlungsempfehlungen: Edge-KI-Architektur zur Vorhersage von Qualit�tsmerkmalen
In: wt Werkstattstechnik online, 110 (6), 1-5, 2020 Authors and Contributors
Kaufmann, Tobias
Ganguly, S.
Trauth, Daniel
Maa�, Wolfgang
Bergs, Thomas
Source
[Contribution to a book, Journal Article]
Nachhaltiges Fehlermanagement - Produktions- und Prozesskosten senken durch Digitalisierung
In: Wissenschaft trifft Praxis, 14, 25-29, 2020 Authors and Contributors
G�nther, Robin Yannick Rocky
Source
[Contribution to a conference proceedings]
Modeling of usage hypotheses for the identification of innovation potential
In: Proceedings of the 9th International Conference on Mass Customization and Personalization - Community of Europe (MCP-CE2020) : September 23 - 25, 2020, Novi Sad, Serbia / Organised by: University of Novi Sad - Faculty of Technical Sciences, Department of Industrial Engineering and Management, My Product - Center for Product Development and Management in cooperation with Ministry of Education, Science and Technological Development of the Republic of Serbia, Provincial Secretariat for Higher Education and Scientific Research of Autonomous Province of Vojvodina ; Editors: Zoran Anišić & Cipriano Forza, 191-198, 2020 Authors and Contributors
Riesener, Michael
D�lle, Christian
Becker, Annika (Corresponding author)
Schuh, G�nther (Corresponding author)
Source
[Journal Article]
Additive Fertigung von Zerspanwerkzeugen: Funktionsangepasste K�hlkan�le steigern die Produktivit�t
In: VDI-Z, 162 (5/6), 38-40, 2020 Authors and Contributors
Lakner, Thomas
Koch, Matthias (Corresponding author)
Bergs, Thomas
Schraknepper, Daniel (Corresponding author)
Source
[Report]
Steigerung der Produktivit�t beim Bohren und Fr�sen schwer zerspanbarer Werkstoffe durch den Einsatz einer inneren Kryo/MMS-Zufuhr - InKryo : Schlussbericht : Berichtszeitraum: 01.07.16 bis 30.06.19, 2020 Authors and Contributors
Koch, Matthias
Schraknepper, Daniel
Bergs, Thomas
Source
[Journal Article]
Robust mathematical formulation and probalistic description of agent-based computational economic market models
In: Advances in complex systems, 23 (6), 2050017, 2020
[DOI: 10.1142/S0219525920500174] Authors and Contributors
Beikirch, Maximilian
Cramer, Simon Tristan
Frank, Martin
Otte, Philipp Joachim
Pabich, Emma
et al.
Source
[Journal Article]
Absolute Dehnungsmessung per Smart Sensor/Absolute strain measuring Smart Sensor
In: wt Werkstattstechnik online, 110 (11/12), 763-767, 2020
[DOI: 10.37544/1436-4980-2020-11-12-27] Authors and Contributors
Sanders, Mark Pascal
Schulz, Jonas
Wunderlich, Ralf
Dahlem, Jan Philipp
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
IoT sensors integrated with the distributed protocol IOTA/Tangle : Bosch XDK110 use case
In: 2020 X Brazilian Symposium on Computing Systems Engineering (SBESC) / general chair: Ant�nio Augusto Fr�hlich (UFSC) ; publication chair: Leandro Buss Becker (UFSC) ; organization: Universidade de Federal de Santa Catarina, INE CTC-UFSC Inform�tica e estat�stica, LISHA ; sponsors: SBC - Sociedade deBrasileira de Computa��o, IES, IEEE, IFIP, 9277865, 2020
[DOI: 10.1109/SBESC51047.2020.9277865] Authors and Contributors
Fernandes Silvano, Wellington (Corresponding author)
De Michele, Daniel (Corresponding author)
Trauth, Daniel (Corresponding author)
Marcelino, Roderval (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
A Failure Handling Process Model for Failure Management in Manual Assembly
In: IEEE IEEM virtual : 2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : 14-17 December 2020 / organizers: IEEE Singapore Section, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 1225-1229, 2020
[DOI: 10.1109/IEEM45057.2020.9309866] Authors and Contributors
Exner, Robin Alexander
Ngo, Quoc Hao
Liang, Junjie (Corresponding author)
Ellerich, Max
G�nther, Robin Yannick Rocky
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Structured Data Preparation Pipeline for Machine Learning-Applications in Production
In: [17th IMEKO TC 10 and EUROLAB Virtual Conference "Global Trends in Testing, Diagnostics & Inspection for 2030", 2020-10-20 - 2020-10-22, online], 241-246, 2020 Authors and Contributors
Frye, Maik
Schmitt, Robert H.
Source
[Conference Presentation]
Tailored melt pool shape and temperature distribution by a dual laser beam LMD-w process
In: TCT Conference @ Formnext Connect online 2020-11-10 - 2020-11-12, 2020 Authors and Contributors
Gipperich, Marius
Riepe, Jan
Day, Robin
Bergs, Thomas
Source
[Conference Presentation]
Tailored melt pool shape by dual laser beam LMD-w process
In: Material Science and Engineering Congress 2020-09-22 - 2020-09-25, 2020 Authors and Contributors
Gipperich, Marius
Riepe, Jan
Day, Robin
Bergs, Thomas
Source
[Journal Article]
Virtuelle Demontage f�r XL-Produkte
In: wt Werkstattstechnik online, 110 (11/12), 833-837, 2020
[DOI: 10.37544/1436-4980-2020-11-12-97] Authors and Contributors
M�nker, S�ren (Corresponding author)
Polikarpov, Mikhail
Schmitt, Robert H.
Source
[Contribution to a book]
Methodik zur funktionsorientierten Charakterisierung der CBN-Schleifkorngeometrie
In: Jahrbuch Schleifen, Honen, L�ppen und Polieren : Verfahren und Maschinen / Hans-Werner Hoffmeister, Berend Denkena (Hrsg.). - 69, 100-110, 2020 Authors and Contributors
Bergs, Thomas
R�ttger, Jannik (Corresponding author)
Barth, Sebastian
Source
[Contribution to a conference proceedings, Journal Article]
Automated scenario analysis of reinforcement learning controlled line-less assembly systems
In: Procedia CIRP, 93, 1091-1096, 2020
[DOI: 10.1016/j.procir.2020.04.116] Authors and Contributors
G�ppert, Mirko Robin Amon (Corresponding author)
Rachner, Jonas Sebastian
Schmitt, Robert H.
Source
[Journal Article]
Digitale L�sungen zur Steuerung frei verketteter Montagesysteme: Realisierung von flexiblen Routen im Kontext Industrie 4.0
In: Industrie 4.0 Management, 36 (6), 43-47, 2020 Authors and Contributors
Rachner, Jonas Sebastian (Corresponding author)
Hort, Simon
Schmitt, Robert H.
Source
[Contribution to a conference proceedings]
Concept for the cost prognosis in the industrialization of highly iteratively developed physical products
In: [1st Conference on Production Systems and Logistics, Online, CPSL 2020, 2020-03-17 - 2020-03-20, Stellenbosch, South Africa], 99-109, 2020
[DOI: 10.15488/9651] Authors and Contributors
Schuh, G�nther
Prote, Jan-Philipp
G�tzlaff, Andreas
Cremer, Sven Alexander
Wlecke, Shari (Corresponding author)
Source
[Journal Article]
Adaptive und kontextspezifische technische Handlungsanweisungen
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 115 (12), 934-937, 2020
[DOI: 10.3139/104.112468] Authors and Contributors
Lossie, Karl
Nuy, Leo Max
Rachner, Jonas Sebastian (Corresponding author)
Schmitt, Robert H.
Source
[Contribution to a conference proceedings, Journal Article]
Identifying trending model coefficients with an ensemble Kalman filter : a demonstration on a force model for milling
In: IFAC-PapersOnLine, 53 (2), 2292-2298, 2020
[DOI: 10.1016/j.ifacol.2020.12.1490] Authors and Contributors
Schwenzer, Max (Corresponding author)
Visconti, Giuseppe
Ay, Muzaffer
Bergs, Thomas
Herty, Michael
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Meeting the Requirements of Industrial Production with a Versatile Multi-Sensor Platform Based on 5G Communication
In: 2020 IEEE 31st Annual International Symposium on Personal, Indoor and Mobile Radio Communications / IEEE PIMRC - IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, 31 August-3 September 2020, London, UK ; IEEE ComSoc - IEEE Communications Society, IEEE, 5 Seiten, 2020
[DOI: 10.1109/PIMRC48278.2020.9217230] Authors and Contributors
Schmitt, Sarah S.
Mohanram, Praveen
Padovani, Roberto
Konig, Niels
Jung, Sven (Corresponding author)
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Comparison of 5G Enabled Control Loops for Production
In: 2020 IEEE 31st Annual International Symposium on Personal, Indoor and Mobile Radio Communications / IEEE PIMRC - IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, 31 August-3 September 2020, London, UK ; IEEE ComSoc - IEEE Communications Society, IEEE, 6 Seiten, 2020
[DOI: 10.1109/PIMRC48278.2020.9217176] Authors and Contributors
Kehl, Pierre (Corresponding author)
Lange, Dirk (Corresponding author)
Maurer, Felix Konstantin (Corresponding author)
Nemeth, Gabor (Corresponding author)
Overbeck, Daniel (Corresponding author)
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
A Comparison of Augmented and Virtual Reality Features in Industrial Trainings
In: Virtual, Augmented and Mixed Reality. Industrial and Everyday Life Applications : 12th International Conference, VAMR 2020, Held as Part of the 22nd HCI International Conference, HCII 2020, Copenhagen, Denmark, July 19-24, 2020, Proceedings, Part II / edited by Jessie Y. C. Chen, Gino Fragomeni, 47-65, 2020
[DOI: 10.1007/978-3-030-49698-2_4] Authors and Contributors
Daling, Lea M. (Corresponding author)
Abdelrazeq, Anas
Isenhardt, Ingrid
Source
[Contribution to a book]
Sehen, H�ren, Trainieren : Gro�e R�ume durch Mixed Reality erfahrbar machen
In: Lehren und Lernen in den Ingenieurwissenschaften : innovativ - digital - international / Ingrid Isenhardt, Marcus Petermann, Martina Schmohr, A. Erman Tekkaya, Uwe Wilkesmann (Hg.), 6004805w267, [267]-275, 2020
[DOI: 10.3278/6004805w267] Authors and Contributors
Hohlbaum, Kathrin
Borowski, Esther
Isenhardt, Ingrid
Source
[Contribution to a book]
Zum Einsatz von Mixed Reality Technologie in Stimmbildung und Sprecherziehung f�r Lehrende der RWTH Aachen University
In: Sprechwissenschaft heute / herausgegeben von Wieland Kranich, 160-168, 2020 Authors and Contributors
Hohlbaum, Kathrin
Isenhardt, Ingrid
von Laguna, Katrin
Mei�ner, Bj�rn
Source
[Contribution to a book, Contribution to a conference proceedings]
Hybrid voice training : integrating virtual rooms into a voice training seminar
In: EDULEARN20 : 12th International Conference on Education and New Learning Technologies, Online 2nd-4th March 2020 : conference proceedings / edited by: L. G�mez Chova, A. L�pez Mart�nez, I. Candel Torres, IATED Academy, 2177-2181, 2020
[DOI: 10.21125/edulearn.2020.0679] Authors and Contributors
Hohlbaum, Kathrin
Borowski, Esther
Isenhardt, Ingrid
Source
[Contribution to a book]
Gamification und Mixed-Reality-Training f�r Lehrende : mehr als nur spielen
In: Lehren und Lernen in den Ingenieurwissenschaften : innovativ - digital - international / Ingrid Isenhardt, Marcus Petermann, Martina Schmohr, A. Erman Tekkaya, Uwe Wilkesmann (Hg.), 6004805w, 253-266, 2020
[DOI: 10.3278/6004805w253] Authors and Contributors
Schiffeler, Nina Maria
Borowski, Esther
Isenhardt, Ingrid
Source
[Contribution to a book, Contribution to a conference proceedings]
Flexible and Lightweight Framework for Active Industrial Asset Administration Shells
In: 2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS) : proceedings : online conference, Tampere, Finland, 10-12 June, 2020 / organized by Tampere University, Finland ; sponsored by the Institute of Electrical and Electronics Engineers (IEEE), IEEE Industrial Electronics Society (IES) ; co-sponsored by IEEE Technology and Engineering Management Society (TEMS), IEEE Systems Council, 549-554, 2020
[DOI: 10.1109/ICPS48405.2020.9274761] Authors and Contributors
Wein, Stephan (Corresponding author)
K�rfer, Lukas
Storms, Simon
Brecher, Christian
Source
[Journal Article]
How to Improve Collaboration Efficiency in the Built Environment of Factories by Using an Integrated Factory Modelling Concept : An Expert Study
In: International journal of design & nature and ecodynamics, 15 (4), 473-481, 2020
[DOI: 10.18280/ijdne.150403] Authors and Contributors
Burggr�f, Peter
Dannapfel, Heinrich Matthias
Ebade Esfahani, Matthias Aref (Corresponding author)
Schwamborn, Nora
Source
[Contribution to a book, Contribution to a conference proceedings]
Choosing the Right Communication Medium for Knowledge Transfer in Global Production Networks
In: IEEE IEEM virtual : 2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : 14-17 December 2020 / organizers: IEEE Singapore Section, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 5-63, 2020
[DOI: 10.1109/IEEM45057.2020.9309976] Authors and Contributors
Schuh, G�nther
G�tzlaff, Andreas
Hast, Katharina (Corresponding author)
Rodemann, Niklas
Rittstieg, Isabell
Source
[Contribution to a book, Contribution to a conference proceedings]
Framework for the Proactive Identification of Adaptation Needs in the Configuration of Global Production Networks
In: IEEE IEEM virtual : 2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : 14-17 December 2020 / organizers: IEEE Singapore Section, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 69-73, 2020
[DOI: 10.1109/IEEM45057.2020.9309963] Authors and Contributors
Schuh, G�nther
G�tzlaff, Andreas
Hast, Katharina
Rodemann, Niklas (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Business Model and Organization : Interdependencies for Customer-Centric Continuous Innovation in Subscription Business
In: [2020 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM, 2020-12-14 - 2020-12-17, Singapore, Singapore], 260-264, 2020
[DOI: 10.1109/IEEM45057.2020.9309897] Authors and Contributors
Schuh, G�nther
G�tzlaff, Andreas
Cremer, Sven Alexander
Lammersmann, Jannik
Liu, Yuan (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Time-related Differentiation of Complexity Costs Using Process Data Mining
In: IEEE IEEM virtual : 2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : 14-17 December 2020 / organizers: IEEE Singapore Section, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 1256-1260, 2020
[DOI: 10.1109/IEEM45057.2020.9309761] Authors and Contributors
Schuh, G�nther
D�lle, Christian
Kuhn, Maximilian
Koch, J.
Menges, Alexander Dominic
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Methodology for the Assessment of Complexity in Corporate Value Networks
In: IEEE IEEM virtual : 2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : 14-17 December 2020 / organizers: IEEE Singapore Section, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 445-449, 2020
[DOI: 10.1109/IEEM45057.2020.9309881] Authors and Contributors
Riesener, Michael
D�lle, Christian
Kre�, Julian Maximilian (Corresponding author)
Schuh, G�nther
Source
[Journal Article]
Innovationsmanagement im Wandel : Von Lean Innovation zu Sustainable Innovation
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 115 (12), 851-854, 2020
[DOI: 10.3139/104.112477] Authors and Contributors
Schuh, G�nther
D�lle, Christian
Perau, Stefan (Corresponding author)
Source
[Journal Article]
Komplexit�tskosten ermitteln und verursachungsgerecht zuordnen : Variantenvielfalt im Griff behalten
In: Industrie-Anzeiger, 142 (26), 24-25, 2020 Authors and Contributors
Schuh, G�nther
D�lle, Christian
Ruschitzka, Christina (Corresponding author)
Source
[Contribution to a conference proceedings]
Optimization approach for the combined planning and control of an agile assembly system for electric vehicles
In: Proceedings of the 1st Conference on Production Systems and Logistics (CPSL 2020), Stellenbosch 17. 20. March 2020, South Africa, Online, 137-146, 2020
[DOI: 10.15488/9655] Authors and Contributors
Burggr�f, Peter
Dannapfel, Heinrich Matthias
Adlon, Tobias
Riegauf, Aaron
Schukat, Esben (Corresponding author)
et al.
Source
[Book]
Kompetenzprofile in einer digital vernetzten Produktion : Ver�nderungen in Kompetenzanforderungen und Handlungsempfehlungen f�r eine anforderungsgerechte Weiterbildung in der metallverarbeitenden Industrie
In: Working Paper Forschungsf�rderung 198, 2020
[DOI: 10.18154/RWTH-2021-03737] Authors and Contributors
Schuh, G�nther
Kelzenberg, Christoph Maximilian Bernd
Helbig, Jens (Corresponding author)
Graberg, Tim
Source
[Journal Article]
Solarthermiekosten senken
In: RAS international, 75 (10), 18-20, 2020 Authors and Contributors
Kramer, Wolfgang (Corresponding author)
Keuper, Alexander (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Identification of evaluation criteria for algorithms used within the context of product development
In: Procedia CIRP, 91, 508-515, 2020 Authors and Contributors
Riesener, Michael
D�lle, Christian
Mendl-Heinisch, Michael Otto (Corresponding author)
Klumpen, Niclas
Source
[Contribution to a conference proceedings, Journal Article]
Methodology for the implementation of subscription models in machinery and plant engineering
In: Procedia CIRP, 90, 730-735, 2020 Authors and Contributors
Riesener, Michael
D�lle, Christian
Ebi, Manuel (Corresponding author)
Perau, Stefan
Source
[Journal Article]
Strategien in der Einzel- und Kleinserienfertigung : Teil 2/2: Stellhebel f�r weiteres Wachstum
In: Industrie-Anzeiger, 142 (22), 20-21, 2020 Authors and Contributors
Schuh, G�nther
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Boshof, Julian
Haase, Bernd (Corresponding author)
Source
[Journal Article]
Effiziente Werkzeuginstandhaltung : vom Kostenverursacher zum Wettbewerbsfaktor
In: massivUMFORMUNG, 4 (3), 64-68, 2020 Authors and Contributors
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Goertz, David
Haase, Bernd (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Matrix-Based Landscapes for Communication between Market and Product Perspective
In: DS 103: Proceedings of the 22nd International DSM Conference (DSM 2020), MIT, Cambridge, Massachusetts, October 13th - 15th 2020, 115-124, 2020
[DOI: 10.35199/dsm2020.12] Authors and Contributors
Riesener, Michael
D�lle, Christian (Corresponding author)
Lender, Benjamin Nils Johannes (Corresponding author)
Schuh, G�nther
Source
[Journal Article]
Wettbewerbsf�hig durch Industrie 4.0 - Analysephase
In: Digital manufacturing, 12 (2), 40-41, 2020 Authors and Contributors
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Goertz, David
Schweins, Julian Benedikt (Corresponding author)
Source
[Journal Article]
Flexibilit�tssteigerungen im Produktionsnetzwerk : Bestimmung eines wirtschaftlichen Flexibilit�tsgrads unter Nutzung netzwerkweiter Austauschpotenziale
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (9), 581-584, 2020
[DOI: 10.1515/zwf-2020-1150909] Authors and Contributors
Schuh, G�nther
G�tzlaff, Andreas
Thomas, Katharina
Ays, Julian Leander (Corresponding author)
Brinkmann, Hendrik
Source
[Journal Article]
Transformation globaler Produktionsnetzwerke : Trends und Herausforderungen
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 115 (4), 196-199, 2020
[DOI: 10.3139/104.112262] Authors and Contributors
Lanza, Gisela
Schuh, G�nther
Friedli, Thomas
Verhaelen, Bastian (Corresponding author)
Rodemann, Niklas (Corresponding author)
et al.
Source
[Journal Article]
Selbstfahrende Pkw in der Distributionslogistik
In: ATZ-Produktion, 7 (2), 52-55, 2020
[DOI: 10.1007/s35726-020-0072-5] Authors and Contributors
Burggr�f, Peter (Corresponding author)
Dannapfel, Matthias
Vierschilling, Sebastian Patrick
Wenning, Marius Julian
Source
[Journal Article]
Besseres Verst�ndnis : Analyse von Produktionsprozessen mit Predictive Quality-Ans�tzen
In: Qualit�t und Zuverl�ssigkeit : QZ, 65 (10), 50-52, 2020 Authors and Contributors
Beckschulte, Sebastian (Corresponding author)
Huebser, Louis
Schumacher, Christian
Schmitt, Robert H.
Kurzhals, Reiner
Source
[Journal Article]
So meistern KMU den digitalen Wandel : Schritt f�r Schritt zu Industrie 4.0
In: Industrie-Anzeiger, 142 (18), 22-23, 2020 Authors and Contributors
Schuh, G�nther
G�tzlaff, Andreas
Ays, Julian Leander (Corresponding author)
Schmidhuber, Matthias
Schlosser, Tino Xaver
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Sheet Metal Forming Using Additively Manufactured Polymer Tools
In: Procedia CIRP, 93, 20-25, 2020 Authors and Contributors
Schuh, G�nther
Bergweiler, Georg
Bickendorf, Philipp (Corresponding author)
Fiedler, Falko
Colag, Can
Source
[Contribution to a conference proceedings, Journal Article]
Modeling and evaluating agile assembly systems using mixed-integer linear programming
In: Procedia CIRP, 93, 1073-1078, 2020 Authors and Contributors
Burggr�f, Peter
Dannapfel, Heinrich Matthias
Adlon, Tobias
Schukat, Esben (Corresponding author)
Kahmann, Hannes
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Topology Optimisation and Metal Based Additive Manufacturing of Welding Jig Elements
In: Procedia CIRP, 93, 62-67, 2020 Authors and Contributors
Schuh, G�nther
Bergweiler, Georg
Lichtenth�ler, Kolja (Corresponding author)
Fiedler, Falko
de la Puente Rebollo, Sergio
Source
[Contribution to a conference proceedings, Journal Article]
Towards Temperature Control Measures for Polymer Additive Injection Molds
In: Procedia CIRP, 93, 90-95, 2020 Authors and Contributors
Schuh, G�nther
Bergweiler, Georg
Lukas, Gerret (Corresponding author)
Oly, Matthias
Source
[Contribution to a conference proceedings, Journal Article]
Hybrid approach to agile assembly planning - Empirical evaluation of the industrial practice
In: Procedia CIRP, 93, 1170-1175, 2020 Authors and Contributors
Burggr�f, Peter
Dannapfel, Heinrich Matthias
Adlon, Tobias
F�lling, Carsten (Corresponding author)
Source
[Journal Article]
Krisen als Chance : Strategien in der Einzel- und Kleinserienfertigung - Teil 1/2
In: Industrie-Anzeiger, 142 (21), 20-21, 2020 Authors and Contributors
Schuh, G�nther
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Boshof, Julian
Kessler, Niklas (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Databased prediction and planning of order-specific transition times
In: Procedia CIRP, 93, 885-890, 2020 Authors and Contributors
Schuh, G�nther
G�tzlaff, Andreas
Sauermann, Frederick Christian (Corresponding author)
Kaul, Oiver
Klein, Nicolas
Source
[Contribution to a conference proceedings, Journal Article]
Application of time series data mining for the prediction of transition times in production
In: Procedia CIRP, 93, 897-902, 2020 Authors and Contributors
Schuh, G�nther
G�tzlaff, Andreas (Corresponding author)
Sauermann, Frederick Christian
Theunissen, Theresa
Source
[Contribution to a conference proceedings, Journal Article]
Capability-based assembly design : An approach for planning an agile assembly system in automotive industry
In: Procedia CIRP, 93, 1206-1211, 2020 Authors and Contributors
Burggr�f, Peter
Dannapfel, Heinrich Matthias (Corresponding author)
Adlon, Tobias
Kahmann, Hannes (Corresponding author)
Schukat, Esben
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Determination of residual stresses in processes with multiple thermal loads
In: Procedia CIRP, 87, 509-514, 2020 Authors and Contributors
Vorspohl, Julian (Corresponding author)
Frerichs, Friedhelm
Schneider, Sebastian
Meinke, Matthias
Schr�der, Wolfgang
et al.
Source
[Book]
Aachener Marktspiegel Business Software - PLM/PDM 2020/2021, 2020 Authors and Contributors
D�lle, Christian (Corresponding author)
Jank, Merle-Hendrikje (Corresponding author)
L�tticke, Berthold
M�ller, Marc
Riesener, Michael
Source
[Contribution to a conference proceedings, Journal Article]
Applying Supervised and Reinforcement Learning to Design Product Portfolios in Accordance with Corporate Goals
In: Procedia CIRP, 91, 127-133, 2020 Authors and Contributors
Riesner, Michael
D�lle, Christian
Dierkes, Christopher
Jank, Merle-Hendrikje (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Adaptive remanufacturing for lifecycle optimization of connected production resources - A literature review
In: Procedia CIRP, 90, 61-66, 2020 Authors and Contributors
Burggr�f, Peter
Wagner, Johannes
Dannapfel, Heinrich Matthias
Adlon, Tobias
Sa�mannshausen, Till
et al.
Source
[Journal Article]
Wettbewerbsf�hig durch Industrie 4.0
In: Digital manufacturing, 12 (4), 42-43, 2020 Authors and Contributors
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Goertz, David
Boshof, Julian (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Derivation of Description Features for Engineering Change Request by Aid of Latent Dirichlet Allocation
In: Proceedings of the Design Society / DESIGN conference, 1, 697-706, 2020
[DOI: 10.1017/dsd.2020.98] Authors and Contributors
Riesener, Michael
D�lle, Christian
Mendl-Heinisch, Michael Otto
Schuh, G�nther
Keuper, Alexander (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Feasibility and Process capability of polymer additive injection molds with slide technology
In: Procedia CIRP, 93, 102-107, 2020 Authors and Contributors
Schuh, G�nther
Bergweiler, Georg
Lukas, Gerret
Abrams, Josef Andrew (Corresponding author)
Source
[Journal Article]
Digitale Transformation in der Produktionsplanung und -steuerung : Ergebnisse einer gemeinsamen Studie der produktionstechnischen Institute Fraunhofer IGCV, IFA, IPMT und WZL
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (4), 252-256, 2020
[DOI: 10.3139/104.112271] Authors and Contributors
Scherwitz, Philipp
Bank, Lukas
Roth, Stefan
Theumer, Philipp
Mundt, Christopher
et al.
Source
[Journal Article]
Sind Audits immer zeitraubend und unwirksam? : Warum digitalisierte Audits gro�es Potenzial haben
In: Qualit�t und Zuverl�ssigkeit : QZ, 65 (12), 42-45, 2020 Authors and Contributors
Buschmann, Daniel (Corresponding author)
Stoffers, Alexander
Schmitt, Robert H.
Source
[Contribution to a conference proceedings, Journal Article]
Global Reference System for factory-wide integration of metrology enabling flexible automation in aeroplane assembly - requirements, concept and suitable technologies
In: Procedia manufacturing, 52, 89-94, 2020
[DOI: 10.1016/j.promfg.2020.11.017] Authors and Contributors
Nicksch, Christoph (Corresponding author)
Kluge-Wilkes, Aline Chantal
Huber, Meike
Schmitt, Robert H.
Source
[Journal Article]
Fehlermanagement 4.0 : Effiziente Fehlerabstellung und -vermeidung mittels K�nstlicher Intelligenz
In: Qualit�t und Zuverl�ssigkeit : QZ, 65 (12), 18-21, 2020 Authors and Contributors
G�nther, Robin Yannick Rocky (Corresponding author)
Wangerow, Kai
Schmitt, Robert H.
Source
[Journal Article]
Mit Predictive Quality in die Zukunft sehen
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 115 (10), 715-718, 2020
[DOI: 10.3139/104.112428] Authors and Contributors
Beckschulte, Sebastian (Corresponding author)
G�nther, Robin Yannick Rocky
Huebser, Louis
Schmitt, Robert H.
Source
[Journal Article]
Digitalisierung des Fehlermanagements : Ein (selbst-)lernender Ansatz f�r kleine und mittlere Unternehmen (KMU)
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (6), 391-393, 2020
[DOI: 10.3139/104.112279] Authors and Contributors
G�nther, Robin Yannick Rocky
Schmitt, Robert H.
Source
[Contribution to a conference proceedings, Journal Article]
Flexible Production Concept of a Low-Cost Battery Pack Housing for Electric Vehicles
In: Procedia CIRP, 93, 137-142, 2020 Authors and Contributors
Schuh, G�nther
Bergweiler, Georg
Fiedler, Falko (Corresponding author)
Koltermann, Marcel
Source
[Contribution to a conference proceedings, Journal Article]
Surface Integrity Analysis of Ceramics Machined by Wire EDM Using Different Trim Cut Technologies
In: Procedia CIRP, 87, 251-256, 2020 Authors and Contributors
Bergs, Thomas
Olivier, Marcel Christoph (Corresponding author)
Gommeringer, Andrea
Kern, Frank
Klink, Andreas (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Load Capacity of Rolling Contacts Manufactured by Wire EDM Turning
In: Procedia CIRP, 87, 474-479, 2020 Authors and Contributors
Bergs, Thomas
Tombul, Ugur (Corresponding author)
Mevissen, Dieter
Klink, Andreas
Brimmers, Jens
Source
[Journal Article]
Modulazione del rumore tramite modifica topografica delle superfici
In: Organi di trasmissione, 50 (9), 32-40, 2020 Authors and Contributors
Kasten, Marcel-Mich�l (Corresponding author)
Brecher, Christian
L�penhaus, Christoph
Lemmer, A.
Bl�se, W.
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Reduzierung der Tonalit�t des Getriebeger�usches einer leichten NFZ-Starrachse
In: WZL-Seminar "Innovationen rund ums Kegelrad", 2020 Authors and Contributors
Kasten, Marcel-Mich�l (Corresponding author)
Brecher, Christian
Brimmers, Jens
Bl�se, Werner
Lemmer, Andreas
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Experimental Investigation on Process Signature for EDM Processes
In: Procedia CIRP, 87, 273-278, 2020 Authors and Contributors
Bergs, Thomas
Mohammadnejad, Mehnoush
Witteler, Maximilian
Heidemanns, Lukas Franz
Klink, Andreas (Corresponding author)
Source
[Contribution to a book]
Best of Benchmark : Grenzfallbetrachtung zwischen Fr�sen und Senkerosion
In: Mehr Wissen. Mehr Neugier. WBA-Forschungsbericht 2020, 64-70, 2020 Authors and Contributors
Wilms, Marcel (Corresponding author)
He�, Dennis Raphael
Schneider, Sebastian
Source
[Contribution to a book, Contribution to a conference proceedings]
Modellbasierte Datenanalyse als Basis f�r Zustands�berwachung in Werkzeugmaschinen
In: Steel and more : ASK 34 : Aachener Stahlkolloquium : 19. November 2020 : Online-Konferenz : Tagungsband / Ulrich Krupp und Sebastian M�nstermann (Hrsg.) ; Institut f�r Eisenh�ttenkunde - Institut f�r Bildsame Formgebung, Rheinisch-Westf�lische Technische Hochschule Aachen, 9-18, 2020 Authors and Contributors
Brecher, Christian
Brockmann, Matthias
Biernat, Benedikt Markus Hubert (Corresponding author)
Frenkel, Nils
Neus, Stephan
Source
[Contribution to a book, Contribution to a conference proceedings]
Evaluation of optimal positioning methods of integral deformation sensors for the correction of thermal errors in machine tools
In: Special Interest Group Meeting Thermal Issues: Laboratory for Machine Tools and Production Engineering (WZL) of RWTH Aachen, and Fraunhofer Institute for Production Technology IPT, DE, 26th 27th February 2020, Aachen/ Germany, 26-29, 2020 Authors and Contributors
Brecher, Christian
Herzog, Roland
Spierling, Robert (Corresponding author)
Tzanetos, Filipos
Naumann, Amdreas
Source
[Report]
Mikrogeometrische Schneidengestaltung von W�lzfr�sern aus PM-HSS - HobPrep, 2020 Authors and Contributors
K�hn, Felix
Brimmers, Jens
Bergs, Thomas
Source
[Journal Article]
Prozesskettenoptimierung in der Fr�serfertigung : Optimierung der Werkzeugfertigung durch Analyse der Randzoneneigenschaften entlang der Prozesskette
In: wt Werkstattstechnik online, 110 (11/12), 800-805, 2020
[DOI: 10.37544/1436-4980-2020-11-12-64] Authors and Contributors
Bergs, Thomas
Gr�nebaum, Timm Christian
Splettst��er, Antonia Maren (Corresponding author)
Beckers, Alexander
Barth, Sebastian
Source
[Journal Article]
Erforschung dynamischer Lagerlasten in Hauptspindeln
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 115 (12), 920-923, 2020
[DOI: 10.3139/104.112418] Authors and Contributors
Brecher, Christian
Eckel, Hans-Martin (Corresponding author)
Neus, Stephan
Source
[Journal Article]
Influence of an Additional Indexing Rotary Axis on Wire Electrical Discharge Machining Performance for the Automated Manufacture of Fir Tree Slots
In: Journal of engineering for gas turbines and power, 142 (9), 091005, 2020
[DOI: 10.1115/1.4046805] Authors and Contributors
Bergs, Thomas
K�pper, Ugur
Herrig, Tim
Klink, Andreas (Corresponding author)
Welling, David
Source
[Contribution to a book, Contribution to a conference proceedings]
Investigations of Single Pulse Smoothing Characteristics during PECM
In: 16th International Symposium on Electrochemical Machining Technology INSECT 2020 : proceedings : November 24-25, 2020, Fraunhofer Institute for Machine Tools and Forming Technology IWU Chemnitz / editors: Prof. Dr.-Ing. Andreas Schubert, Dr.-Ing. Mike Zinecker, Chemnitz University of Technology, Professorship Micromanufacturing Technology, 35-40, 2020 Authors and Contributors
Klink, Andreas (Corresponding author)
Rommes, Bob
Heidemanns, Lukas Franz
Herrig, Tim
Source
[Contribution to a book, Contribution to a conference proceedings]
Formation of Flow-Grooves during Electrochemical Machining
In: 16th International Symposium on Electrochemical Machining Technology INSECT 2020 : proceedings : November 24-25, 2020, Fraunhofer Institute for Machine Tools and Forming Technology IWU Chemnitz / editors: Prof. Dr.-Ing. Andreas Schubert, Dr.-Ing. Mike Zinecker, Chemnitz University of Technology, Professorship Micromanufacturing Technology, 27-32, 2020 Authors and Contributors
Rommes, Bob (Corresponding author)
Klink, Andreas
Herrig, Tim
Vorspohl, Julian
Ehle, Lisa Christine
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Experimental Investigation on Process Signature for EDM Processes
In: Procedia CIRP, 87, 273-278, 2020
[DOI: 10.1016/j.procir.2020.02.114] Authors and Contributors
Bergs, Thomas
Mohammadnejad, Mehnoush
Witteler, Maximilian
Heidemanns, Lukas Franz
Klink, Andreas (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Load Capacity of Rolling Contacts Manufactured by Wire EDM Turning
In: Procedia CIRP, 87, 474-479, 2020
[DOI: 10.1016/j.procir.2020.02.111] Authors and Contributors
Bergs, Thomas
Tombul, Ugur (Corresponding author)
Mevissen, Dieter
Klink, Andreas
Brimmers, Jens
Source
[Contribution to a conference proceedings, Journal Article]
Surface Integrity Analysis of Ceramics Machined by Wire EDM Using Different Trim Cut Technologies
In: Procedia CIRP, 87, 252-256, 2020
[DOI: 10.1016/j.procir.2020.02.026] Authors and Contributors
Bergs, Thomas
Olivier, Marcel Christoph (Corresponding author)
Gommeringer, Andrea
Kern, Frank
Klink, Andreas (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Determination of residual stresses in processes with multiple thermal loads
In: Procedia CIRP, 87, 509-514, 2020
[DOI: 10.1016/j.procir.2020.02.066] Authors and Contributors
Vorspohl, Julian (Corresponding author)
Frerichs, Friedhelm
Schneider, Sebastian
Meinke, Matthias
Schr�der, Wolfgang
et al.
Source
[Contribution to a conference proceedings]
Measuring the kinematic behavior of spindle bearing rolling elements under radial loads
In: Bearing world : International Bearing Conference, 19-23 October, 2020 : the expert forum for bearings, focusing on rolling bearings! / FVA, 149-153, 2020 Authors and Contributors
Brecher, Christian
Eckel, Hans-Martin (Corresponding author)
Fey, Marcel
Neus, Stephan
Source
[Journal Article]
Mit datenbasierten Modellen Fr�sprozesse optimieren : WZL-Forschungsergebnisse: Datengetriebene Ans�tze steigern die Genauigkeit von Simulationsmodellen zum Auslegen von Fr�sprozessen
In: NC-Fertigung, 41 (12), 32-33, 2020 Authors and Contributors
Brecher, Christian
Wiesch, Marian (Corresponding author)
Fey, Marcel
Source
[Journal Article]
Design of a tuned mass disc damper with variable natural frequency for chatter suppression
In: Vibroengineering procedia : VP, 2020 (34), 39-42, 2020
[DOI: 10.21595/vp.2020.21755] Authors and Contributors
Brecher, Christian
Zhao, Guifeng (Corresponding author)
Fey, Marcel
Source
[Contribution to a conference proceedings]
Enhancing the TCP position controllability and force observability of a feed drive axis with two direct length measuring systems
In: 18th International Conference on Precision Engineering (ICPE2020), Nov. 23-27. 2020 : Kobe/Japan : Virtual Conference, C-3-12, 2020 Authors and Contributors
Kehne, Sebastian (Corresponding author)
Fey, Marcel
Herfs, Werner
Brecher, Christian
Source
[Contribution to a book, Contribution to a conference proceedings]
Control of the static and dynamic stiffness of feed drive axes by using an external force sensor
In: Proceedings 2020 International Conference on Electrical Machines (ICEM) : online, 23-26 August, 2020 / organized by: International Conference of Electrical Machines Local Organizing Committee ; sponsored by the Institute of Electrical and Electronics Engineers, IEEE Industrial Electronics Society (IES), 1081-1085, 2020
[DOI: 10.1109/ICEM49940.2020.9271036] Authors and Contributors
Kehne, Sebastian (Corresponding author)
Fey, Marcel
Brecher, Christian
Herfs, Werner
Source
[Contribution to a conference proceedings]
Development of an Online Identification System for System Identification of Machine Tool Dynamics
In: 18th International Conference on Precision Engineering (ICPE2020) : Nov.23-27. 2020, Kobe/Japan : Virtual Conference, C-1-4 (4 p), 4 Seiten, 2020 Authors and Contributors
Fujita, Tomoya
Xi, Tiandong
Kehne, Sebastian
Fey, Marcel
Brecher, Christian
Source
[Contribution to a conference proceedings, Journal Article]
Investigations on the Influence of the Cemented Carbide Grade on the Surface Integrity when End Milling DA 718
In: Procedia CIRP, 93, 1490-1495, 2020 Authors and Contributors
Bergs, Thomas
Hardt, Marvin Yannick (Corresponding author)
Schraknepper, Daniel
Source
[Contribution to a book, Contribution to a conference proceedings]
Transfer of a Cylindrical Rolling Force Model for Cylindrical Discs to Rolling of PM Manufactured Spur Gears
In: Developing the powder metallurgy future : additve manufacturing - functional materials - hard materials and diamond tools - hot isostatic pressing - metal injection moulding - new materials, processes and applications - press and sinter : Euro PM2020 Virtual Congress : proceedings : 5-7 October 2020, online / EMPA - European Powder Metallurgy Association, 2020 Authors and Contributors
Bergs, Thomas
Brimmers, Jens
Klee, Lukas (Corresponding author)
Frech, Tim
Source
[Contribution to a conference proceedings, Journal Article]
Modelling and analysis of manufacturing tasks for combined phase-out and ramp-up production
In: Procedia CIRP, 91, 164-169, 2020 Authors and Contributors
Bergs, Thomas
Apelt, Sebastian (Corresponding author)
Rey, Jan
Barth, Sebastian
Source
[Contribution to a book, Contribution to a conference proceedings]
Metrological investigation and simulation of thermo-mechanical interactions in externally driven spindles
In: Special Interest Group Meeting Thermal Issues: Laboratory for Machine Tools and Production Engineering (WZL) of RWTH Aachen, and Fraunhofer Institute for Production Technology IPT, DE, 26th 27th February 2020, Aachen/ Germany, 14-17, 2020 Authors and Contributors
Brecher, Christian
Steinert, Alexander (Corresponding author)
Neus, Stephan
Fey, Marcel
Source
[Contribution to a conference proceedings, Journal Article]
Modeling of the Fracture Behavior of CBN Grains during Single Grain Dressing using FEM
In: Procedia CIRP, 93, 1514-1519, 2020 Authors and Contributors
Bergs, Thomas
Ohlert, Marius (Corresponding author)
Prinz, Sebastian
Barth, Sebastian
Source
[Contribution to a book, Contribution to a conference proceedings]
Case Study for the Integrated Development of a Modular System for Vehicle Superstructures of Battery Electric Light Commercial Vehicles
In: IEEE IEEM virtual : 2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : 14-17 December 2020 / organizers: IEEE Singapore Section, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 424-429, 2020
[DOI: 10.1109/IEEM45057.2020.9309747] Authors and Contributors
Schuh, G�nther
D�lle, Christian
Kreutzer, Ramon
Patzwald, Marc
Koch, Jan Felix (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Your customer’s digital shadow : Objectification of human perception by a multisensory measurement system
In: Procedia CIRP, 93, 1370-1375, 2020 Authors and Contributors
Gussen, Lars Christopher Konrad (Corresponding author)
Ellerich, Max
Schmitt, Robert H.
Viktorov, Nikola
Source
[Contribution to a conference proceedings, Journal Article]
Multi-Staged, Multi-Objective Optimization for Operation Management in Line-less Mobile Assembly Systems (LMAS)
In: Procedia CIRP, 93, 1121-1126, 2020 Authors and Contributors
Buckhorst, Armin Friedrich
Schmitt, Robert H.
Source
[Contribution to a conference proceedings, Journal Article]
Multi-Staged, Multi-Objective Optimization for Operation Management in Line-less Mobile Assembly Systems (LMAS)
In: Procedia CIRP, 93, 1121-1126, 2020
[DOI: 10.1016/j.procir.2020.04.046] Authors and Contributors
Buckhorst, Armin Friedrich (Corresponding author)
Schmitt, Robert H.
Source
[Contribution to a book, Journal Article]
Mit "Digitalen Schatten" Daten verdichten und darstellen : Der Exzellenzcluster "Internet der Produktion" forscht �ber die Produktionstechnik hinaus
In: RWTH-Themen : Berichte aus der Rheinisch-Westf�lischen Technischen Hochschule Aachen, 2020 (2), 18-23, 2020
[DOI: 10.18154/RWTH-2021-02496] Authors and Contributors
Jarke, Matthias
van der Aalst, Wil M. P.
Brecher, Christian
Brockmann, Matthias
Koren, Istv�n
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Your customer’s digital shadow : Objectification of human perception by a multisensory measurement system
In: Procedia CIRP, 93, 1370-1375, 2020
[DOI: 10.1016/j.procir.2020.03.011] Authors and Contributors
Gussen, Lars Christopher Konrad (Corresponding author)
Ellerich, Max
Schmitt, Robert H.
Viktorov, Nikola
Source
[Conference Presentation]
Einfluss des Schleifprozesses auf die Werkst�ckoberfl�che und -randzone von WC-Co Hartmetallen
In: 11. Wernesgr�ner Werkzeugsymposium Wernesgr�n 2020-01-29 - 2020-01-31, 2020
[DOI: 10.18154/RWTH-2021-02315] Authors and Contributors
Bergs, Thomas
Dehmer, Alexander Moritz (Corresponding author)
Wrobel, Christian
Source
[Contribution to a book, Contribution to a conference proceedings]
Methodology for the determination of the logic of innovation ideas for technical systems
In: 2020 IEEE Technology & Engineering Management Conference (TEMSCON) / IEEE, TEMSCON 2020, IEEE TEMS ; proceedings editor: Tugrul Daim (Portland State University, USA), 2020
[DOI: 10.1109/TEMSCON47658.2020.9140086] Authors and Contributors
Schuh, G�nther
Schwarberg, Thomas (Corresponding author)
Scholz, Patrick
Source
[Contribution to a book, Contribution to a conference proceedings]
Methodology Concept for the Determination of the Idea-specific Requirement Space for the Execution of Radical Innovations
In: 2020 IEEE Technology & Engineering Management Conference (TEMSCON) / IEEE, TEMSCON 2020, IEEE TEMS ; proceedings editor: Tugrul Daim (Portland State University, USA), 2020
[DOI: 10.1109/TEMSCON47658.2020.9140107] Authors and Contributors
Schuh, G�nther (Corresponding author)
Zeller, Paul (Corresponding author)
Source
[Journal Article]
Statische Eigenschaften von Werkzeugschnittstellen (Teil2)
In: Maschinenmarkt, 126 (19), 68-73, 2020 Authors and Contributors
Brecher, Christian
Bergs, Christian Siegfried (Corresponding author)
Neus, Stephan
Source
[Journal Article]
Generator mit Radialkraftregelung optimiert Luftfahrttechnik
In: Maschinenmarkt, 126 (Online First), 5 p. ID:46988604, 2020 Authors and Contributors
Brecher, Christian
Neus, Stephan
Malinowski, Oscar
G�rtner, Marcus Holger
Source
[Contribution to a conference proceedings]
Entwicklung und Validierung einer ebenenbasierten W�lzsch�lsimulation
In: Aktuelle Entwicklungen beim Vorverzahnen, Aachen, 04./05. November 2020, 21 Folien, 2020 Authors and Contributors
Jan�en, Christopher Maria (Corresponding author)
Brimmers, Jens (Corresponding author)
Bergs, Thomas
Source
[Contribution to a conference proceedings]
Leistungspotenziale von Zwei-Schnitt-Strategien beim W�lzfr�sen
In: Aktuelle Entwicklungen beim Vorverzahnen, Aachen, 04./05. November 2020, 22 Folien, 2020 Authors and Contributors
Tro�, Nico (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Source
[Journal Article]
Critical incidents of outsourcing processes in pharmaceutical supply chain : a mixed-methods approach
In: Journal of Industrial Engineering and Management : JIEM, 13 (3), 495-513, 2020
[DOI: 10.3926/jiem.3085] Authors and Contributors
Marinkovic, Valentina (Corresponding author)
Heine, Ina (Corresponding author)
Milosevic Georgiev, Andrijana (Corresponding author)
Schmitt, Robert H. (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Grinding wheel wear and material removal mechanisms during grinding of polycrystalline diamond
In: Procedia CIRP, 93, 1520-1525, 2020 Authors and Contributors
Bergs, Thomas
M�ller, Ulrich
Vits, Frederik
Barth, Sebastian
Source
[Contribution to a conference proceedings, Journal Article]
Analysis of the Influence of Surface Integrity of Cemented Carbides Machined by Sinking EDM on Flexural Fatigue
In: Procedia CIRP, 87, 456-641, 2020 Authors and Contributors
Bergs, Thomas
Petersen, Timm
Tombul, Ugur
Klink, Andreas
Source
[Contribution to a conference proceedings, Journal Article]
Experimental Investigation of Oxide Layer Formation Depending on Temperature Holding Time during Inductive Heating of Annealed 16MnCr5
In: Procedia manufacturing, 47, 1328-1333, 2020 Authors and Contributors
Weiser, Ingo Felix (Corresponding author)
Hild, Rafael
Feuerhack, Andreas
Trauth, Daniel
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
A Novel Test Bench to Investigate the Effects of the Tool Rotation on Cutting Fluid Jets to Improve the Tool Design via Additive Manufacturing
In: Procedia CIRP, 91, 9-14, 2020 Authors and Contributors
Lakner, Thomas
Bergs, Thomas
Schraknepper, Daniel
Source
[Preprint]
Identifying trending coefficients with an ensemble Kalman filter, 2020 Authors and Contributors
Schwenzer, Max
Visconti, Giuseppe
Ay, Muzaffer
Bergs, Thomas
Herty, Michael
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Automated machine learning for predictive quality in production
In: Procedia CIRP, 93, 443-448, 2020 Authors and Contributors
Krau�, Jonathan (Corresponding author)
Pacheco, Bruno Machado
Zang, Hanno Maximilian
Schmitt, Robert H.
Source
[Contribution to a conference proceedings, Journal Article]
Numerical Investigation of Damage in Single-step, Two-step, and Reverse Deep Drawing of Rotationally Symmetric Cups from DP800 Dual Phase Steel
In: Procedia manufacturing, 47, 636-642, 2020 Authors and Contributors
Nick, Matthias (Corresponding author)
Feuerhack, Andreas
Bergs, Thomas
Clausemeyer, Till
Source
[Book, Dissertation / PhD Thesis]
Multiscale modeling of thermomechanical loads in the broaching of direct aged inconel 718
In: Ergebnisse aus der Produktionstechnik 36/2020, 2020 Authors and Contributors
Peng, Bingxiao
Source
[Contribution to a conference proceedings, Journal Article]
A methodology for the ecological and economic assessment of manufacturing process sequences
In: Procedia CIRP, 90, 488-493, 2020 Authors and Contributors
Bergs, Thomas
Gr�nebaum, Timm Christian (Corresponding author)
Rey, Jan
Barth, Sebastian
Goldmanns, Marc
Source
[Contribution to a conference proceedings, Journal Article]
Identification of Unintended Effects Caused by Adaptations of Manufacturing Process Sequences for Safety-Critical Components
In: Procedia CIRP, 93, 1019-1024, 2020 Authors and Contributors
Bergs, Thomas
Hermann, Lennard (Corresponding author)
Rey, Jan
Barth, Sebastian
Source
[Contribution to a conference proceedings, Journal Article]
Preparation of symmetrical and asymmetrical cutting edges on solid cutting tools using brushing tools with filament-integrated diamond grits
In: Procedia CIRP, 93, 873-878, 2020 Authors and Contributors
Bergs, Thomas
Schneider, Sebastian (Corresponding author)
Amara, M.
Ganser, Philipp
Source
[Contribution to a book, Contribution to a conference proceedings]
Collision free motion planning for robots by capturing the environment
In: 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) : proceedings : Vienna, Austria - hybrid, 08-11 September, 2020 / organized by TU Wien, Austria ; sponsored by the Institute of Electrical and Electronics Engineers (IEEE), IEEE Industrial Electronics Society (IES), 636-642, 2020
[DOI: 10.1109/ETFA46521.2020.9211940] Authors and Contributors
Blanke, Philipp (Corresponding author)
Boltes, Marvin
Storms, Simon
Lienenl�ke, Lars
Brecher, Christian
Source
[Journal Article]
Maschinelles Lernen zur Pr�diktion der Bauteilqualit�t: Erweiterung eines Ansatzes zur merkmalsbasierten Qualit�tspr�diktion durch k�nstliche neuronale Netze
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (11), 834-837, 2020
[DOI: 10.3139/104.112458] Authors and Contributors
Brecher, Christian
Ochel, Janis
Lohrmann, Vincent (Corresponding author)
Fey, Marcel
Source
[Journal Article]
Umplanungsl�sung f�r CAM-Systeme : Ad-hoc Generierung von CAM-Planungen f�r alternative CNC-Maschinen
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (12), 869-872, 2020
[DOI: 10.3139/104.112466] Authors and Contributors
Brecher, Christian
Ochel, Janis (Corresponding author)
K�nigs, Michael
Chittem, Siram
Fey, Marcel
Source
[Contribution to a conference proceedings, Journal Article]
A Novel Test Bench to Investigate the Effects of the Tool Rotation on Cutting Fluid Jets to Improve the Tool Design via Additive Manufacturing
In: Procedia CIRP, 91, 9-14, 2020
[DOI: 10.1016/j.procir.2020.02.144] Authors and Contributors
Lakner, Thomas (Corresponding author)
Bergs, Thomas
Schraknepper, Daniel (Corresponding author)
Source
[Report]
Abschlussbericht zum Projekt Normung einer einheitlichen Kupplung f�r angetriebene Werkzeuge in Revolverdrehmaschinen REKUNORM (Revolverkupplungsnorm) im Rahmen des BMWi F�rderprogramms: WIPANO : Projektzeitraum: 01.09.2017-29.02.2020, 2020
[DOI: 10.2314/KXP:1736489321] Authors and Contributors
Brecher, Christian
Bergs, Christian Siegfried (Corresponding author)
Lembke, Dietrich
Source
[Contribution to a conference proceedings, Journal Article]
Analysis of the Influence of Surface Integrity of Cemented Carbides Machined by Sinking EDM on Flexural Fatigue
In: Procedia CIRP, 87, 456-641, 2020
[DOI: 10.1016/j.procir.2020.02.096] Authors and Contributors
Bergs, Thomas
Petersen, Timm (Corresponding author)
Tombul, Ugur
Klink, Andreas (Corresponding author)
Source
[Journal Article]
Statische Eigenschaften von Werkzeugschnittstellen (Teil1)
In: Maschinenmarkt, 126 (18), 60-63, 2020 Authors and Contributors
Brecher, Christian
Bergs, Christian Siegfried (Corresponding author)
Neus, Stephan
Source
[Journal Article]
Potenziale des Zahnflankenprofilschleifens mit keramisch gebundenem cBN
In: Die Antriebstechnik, 59 (10), 56-59, 2020 Authors and Contributors
Bergs, Thomas
Brimmers, Jens (Corresponding author)
Solf, Mareike
Source
[Contribution to a conference proceedings, Journal Article]
Bio-inspired control of automated stem cell production
In: Procedia CIRP, 88, 600-605, 2020 Authors and Contributors
Egri, P�ter
Cs�ji, Bal�zs Cs
Kis, Kriszti�n B.
Monostori, L�szl�
V�ncza, J�zsef
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Grinding wheel wear and material removal mechanisms during grinding of polycrystalline diamond
In: Procedia CIRP, 93, 1520-1525, 2020
[DOI: 10.1016/j.procir.2020.03.083] Authors and Contributors
Bergs, Thomas
M�ller, Ulrich (Corresponding author)
Vits, Frederik
Barth, Sebastian
Source
[Contribution to a conference proceedings, Journal Article]
Modeling of the Fracture Behavior of CBN Grains during Single Grain Dressing using FEM
In: Procedia CIRP, 93, 1514-1519, 2020
[DOI: 10.1016/j.procir.2020.03.021] Authors and Contributors
Bergs, Thomas
Ohlert, Marius (Corresponding author)
Prinz, Sebastian
Barth, Sebastian
Source
[Contribution to a conference proceedings, Journal Article]
Investigations on the Influence of the Cemented Carbide Grade on the Surface Integrity when End Milling DA 718
In: Procedia CIRP, 93, 1490-1495, 2020
[DOI: 10.1016/j.procir.2020.03.068] Authors and Contributors
Bergs, Thomas
Hardt, Marvin Yannick (Corresponding author)
Schraknepper, Daniel
Source
[Contribution to a conference proceedings, Journal Article]
Modelling and analysis of manufacturing tasks for combined phase-out and ramp-up production
In: Procedia CIRP, 91, 164-169, 2020
[DOI: 10.1016/j.procir.2020.02.164] Authors and Contributors
Bergs, Thomas
Apelt, Sebastian (Corresponding author)
Rey, Jan
Barth, Sebastian (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Identification of Unintended Effects Caused by Adaptations of Manufacturing Process Sequences for Safety-Critical Components
In: Procedia CIRP, 93, 1019-1024, 2020
[DOI: 10.1016/j.procir.2020.03.013] Authors and Contributors
Bergs, Thomas
Hermann, Lennard (Corresponding author)
Rey, Jan
Barth, Sebastian
Source
[Journal Article]
Inkrementelle Randzonenmodifikation von einsatzgeh�rteten 16MnCr5-Stirnr�dern mittels maschinellem Oberfl�chenh�mmern
In: Tribologie und Schmierungstechnik, 67 (2), 4-17, 2020
[DOI: 10.30419/TuS-2020-0008] Authors and Contributors
Bergs, Thomas
Uhlmann, Lars (Corresponding author)
Mannens, Robby Norbert
Trauth, Daniel
Source
[Journal Article]
Echtzeit-Bauteilpr�fung beim Feinschneiden: Pr�fstand zur Schnittteilcharakterisierung mittels Bildverarbeitung und neuronalen Netzen
In: wt Werkstattstechnik online, 110 (6), 382-388, 2020
[DOI: 10.37544/1436-4980-2020-06-22] Authors and Contributors
Voigts, Herman Otto (Corresponding author)
Hild, Rafael
Feuerhack, Andreas
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
A methodology for the ecological and economic assessment of manufacturing process sequences
In: Procedia CIRP, 90, 488-493, 2020
[DOI: 10.1016/j.procir.2020.01.065] Authors and Contributors
Bergs, Thomas
Gr�nebaum, Timm Christian (Corresponding author)
Rey, Jan
Barth, Sebastian
Goldmanns, Marc
Source
[Journal Article]
Prozessauslegung bei W�lzfr�sern untersucht
In: Branchenreport : Nachrichten f�r die Werkzeugmaschinenindustrie, 2020 (Juli), 10-11, 2020 Authors and Contributors
Tro�, Nico (Corresponding author)
Source
[Journal Article]
Schwingungsd�mpfung in Werkzeugmaschinen
In: Maschinenmarkt, 126 (11/12), 22-25, 2020 Authors and Contributors
Brecher, Christian
Klumpen, Niclas (Corresponding author)
Neus, Stephan
D�ltgen, Peter
Thei�, Ralf
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Numerical Investigation of Damage in Single-step, Two-step, and Reverse Deep Drawing of Rotationally Symmetric Cups from DP800 Dual Phase Steel
In: Procedia manufacturing, 47, 636-642, 2020
[DOI: 10.1016/j.promfg.2020.04.195] Authors and Contributors
Nick, Matthias (Corresponding author)
Feuerhack, Andreas
Bergs, Thomas
Clausemeyer, Till
Source
[Contribution to a conference proceedings, Journal Article]
Automated machine learning for predictive quality in production
In: Procedia CIRP, 93, 443-448, 2020
[DOI: 10.1016/j.procir.2020.04.039] Authors and Contributors
Krau�, Jonathan (Corresponding author)
Pacheco, Bruno Machado
Zang, Hanno Maximilian
Schmitt, Robert H.
Source
[Contribution to a conference proceedings, Journal Article]
Bio-inspired control of automated stem cell production
In: Procedia CIRP, 88, 600-605, 2020
[DOI: 10.1016/j.procir.2020.05.105] Authors and Contributors
Egri, P�ter
Cs�ji, Bal�zs Cs
Kis, Kriszti�n B.
Monostori, L�szl� (Corresponding author)
V�ncza, J�zsef
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Preparation of symmetrical and asymmetrical cutting edges on solid cutting tools using brushing tools with filament-integrated diamond grits
In: Procedia CIRP, 93, 873-878, 2020
[DOI: 10.1016/j.procir.2020.04.028] Authors and Contributors
Bergs, Thomas
Schneider, Sebastian (Corresponding author)
Amara, M.
Ganser, Philipp
Source
[Contribution to a conference proceedings]
Case study on technological applications for production planning and control in the context of industry 4.0
In: [CONFERENCE ON PRODUCTION SYSTEMS AND LOGISTICS CPSL 2020], 2020
[DOI: 10.15488/9683] Authors and Contributors
Schuh, G�nther
Scholz, Patrick
Source
[Contribution to a book, Contribution to a conference proceedings]
Assessing the application based utility potential of new technologies
In: 2020 IEEE Technology & Engineering Management Conference (TEMSCON) / IEEE, TEMSCON 2020, IEEE TEMS ; proceedings editor: Tugrul Daim (Portland State University, USA), 8 Seiten, 2020
[DOI: 10.1109/TEMSCON47658.2020.9140122] Authors and Contributors
Schuh, G�nther
Scholz, Patrick (Corresponding author)
Ando, Yuka Marie-Sophie
Source
[Contribution to a book, Contribution to a conference proceedings]
Identification of Indicators for the Assessment of Technological Risks within Technology Selection
In: 2020 61st International Scientific Conference on Information Technology and Management Science of Riga Technical University (ITMS) : proceedings : October 15-16, 2020, Riga, Latvia / edited by: Janis Grabis, Andrejs Romanovs, Galina Kulesova ; organized by: Riga Technical University, IEEE Latvia Section, Information Technology Institute of RTU ; publisher: IEEE, 2020
[DOI: 10.1109/ITMS51158.2020.9259226] Authors and Contributors
Schuh, G�nther (Corresponding author)
Scholz, Patrick (Corresponding author)
Seichter, Stefan
Source
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
PVD Coated Tools and Surface-Structured Workpieces in Dry Cold Forming of Steel
In: Defect and diffusion forum, 404, 19-27, 2020
[DOI: 10.4028/www.scientific.net/DDF.404.19] Authors and Contributors
Bobzin, Kirsten
Br�gelmann, Tobias
Kruppe, Nathan Christopher
Bergs, Thomas
Mattfeld, Patrick-Marcel
et al.
Source
[Contribution to a conference proceedings, Journal Article]
PROGRAMS project approach to maintenance management
In: IFAC-PapersOnLine, 53 (3), 313-318, 2020
[DOI: 10.1016/j.ifacol.2020.11.050] Authors and Contributors
Surico, M.
Ricatto, R.
Merlo, A.
N�meth, I.
Sardelis, A.
et al.
Source
[Journal Article]
Network-based factory planning for small and medium-sized enterprises
In: Production planning & control, 9 Seiten, 2020
[DOI: 10.1080/09537287.2020.1854885] Authors and Contributors
Burggr�f, Peter
Dannapfel, Matthias
Schneidermann, Dennis
Ebade Esfahani, Matthias Aref (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Privacy-Preserving Production Process Parameter Exchange
In: 36th Annual Computer Security Applications Conference : Virtual Conference 7-11 December 2020 : Proceedings, 510-525, 2020
[DOI: 10.1145/3427228.3427248] Authors and Contributors
Pennekamp, Jan (Corresponding author)
Buchholz, Erik (Corresponding author)
Lockner, Yannik Peter (Corresponding author)
Dahlmanns, Markus (Corresponding author)
Xi, Tiandong (Corresponding author)
et al.
Source
[Journal Article]
Interoperabilit�t als Erfolgsfaktor f�r die vernetzte, adaptive Produktion
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (5), 344-347, 2020
[DOI: 10.3139/104.112280] Authors and Contributors
Kiesel, Raphael
Pothen, Mario
Arntz, Kristian
Bergs, Thomas
Schmitt, Robert H.
Source
[Book, Dissertation / PhD Thesis]
Kontinuierliche Verbesserung mittels Prescriptive Analytics
In: Ergebnisse aus der Produktionstechnik 33/2020, 2020 Authors and Contributors
Busam, Thomas
Source
[Book, Dissertation / PhD Thesis]
Funktionsorientierte Auslegung topologischer Zahnflankenmodifikationen f�r Beveloidverzahnungen
In: Ergebnisse aus der Produktionstechnik 37/2020, 2020 Authors and Contributors
Brimmers, Jens
Source
[Book]
Tooling in Austria 2020, 2020 Authors and Contributors
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Boshof, Julian
Pr�mmer, Marcel
Ebbecke, Christoph Wilhelm
et al.
Source
[Contribution to a book]
Worldwide Lab - Garantierte Produktivit�tssteigerung durch Lernen im Netzwerk
In: Internet of Production - Turning Data into Value : Statusberichte aus der Produktionstechnik 2020, 254-280, 2020 Authors and Contributors
Schuh, G�nther
Burggr�f, Peter
Gottschalk, Sebastian
G�tzlaff, Andreas
Dannapfel, Matthias
et al.
Source
[Contribution to a book]
Value Capture - Datengetriebene Gesch�ftsmodelle erfolgreich in produzierenden Unternehmen implementieren
In: Internet of Production - Turning Data into Value : Statusberichte aus der Produktionstechnik 2020, 36-56, 2020 Authors and Contributors
Schuh, G�nther
Breit, Stefan
Echterfeld, Julian
Graberg, Tim
Kreutzer, Ramon
et al.
Source
[Contribution to a book]
Subskriptionsmodelle im Maschinen- und Anlagenbau
In: Internet of Production - Turning Data into Value : Statusberichte aus der Produktionstechnik 2020, 282-301, 2020 Authors and Contributors
Schuh, G�nther
Boshof, Julian
D�lle, Christian
Kelzenberg, Christoph Maximilian Bernd
Tittel, Jonas
Source
[Contribution to a book]
Predictive Quality - Data Analytics in produzierenden Unternehmen
In: Internet of Production - Turning Data into Value : Statusberichte aus der Produktionstechnik 2020, 226-253, 2020 Authors and Contributors
Schmitt, Robert H.
Kurzhals, Reiner
Ellerich, Max
Nilgen, Guido
Schlegel, Peter
et al.
Source
[Contribution to a book]
Neue Gesch�ftsmodelle f�r Werkzeugmaschinen
In: Internet of Production - Turning Data into Value : Statusberichte aus der Produktionstechnik 2020, 365-377, 2020 Authors and Contributors
Brecher, Christian
Neus, Stephan
Rettich, Thorsten
Steinert, Alexander
Wiesch, Marian
Source
[Contribution to a book]
Mit dem Digitalen Zwilling Prozessgrenzen �berwinden
In: Internet of Production - Turning Data into Value : Statusberichte aus der Produktionstechnik 2020, 81-113, 2020 Authors and Contributors
Bergs, Thomas
Gierlings, Sascha
Augspurger, Thorsten
Source
[Contribution to a book]
Looking 4.0-ward: Wie das Internet of Production die Besch�ftigungsf�higkeit in der Zukunft der Arbeit beeinflusst
In: Internet of Production - Turning Data into Value : Statusberichte aus der Produktionstechnik 2020, 302-339, 2020 Authors and Contributors
Metzmacher, Amelie Isabel
Hellebrandt, Thomas Sven
Heine, Ina
Bergholz, Markus
D�bbeler, Benjamin
et al.
Source
[Book]
Internet of Production - Turning Data into Value : Statusberichte aus der Produktionstechnik 2020, 2020
[DOI: 10.24406/ipt-n-589615] Authors and Contributors
Bergs, Thomas (Editor)
Brecher, Christian (Editor)
Schmitt, Robert H. (Editor)
Schuh, G�nther (Editor)
Source
[Contribution to a book]
Individuelle Prozessketten im Werkzeugbau durch daten- und modellbasierte Prognosen
In: Internet of Production - Turning Data into Value : Statusberichte aus der Produktionstechnik 2020, 57-70, 2020 Authors and Contributors
Bergs, Thomas
Arntz, Kristian
Pr�mmer, Marcel
Wilms, Marcel
Source
[Contribution to a book]
Holistic Automation - Wertsch�pfungspotentiale einer integrierten durchg�ngigen Vernetzung
In: Internet of Production - Turning Data into Value : Statusberichte aus der Produktionstechnik 2020, 21-35, 2020 Authors and Contributors
Brecher, Christian
Buchsbaum, Melanie Sarah Katharina
Blanke, Philipp
Hoffmann, Nicolai
Storms, Simon
et al.
Source
[Contribution to a book]
Future Assembly with Distributed Sensor Services
In: Internet of Production - Turning Data into Value : Statusberichte aus der Produktionstechnik 2020, 158-184, 2020 Authors and Contributors
Schmitt, Robert H.
Eickhorst, Dirk
Fl�ter, Felix
Freeman, Philip L.
Hanke, Norbert
et al.
Source
[Contribution to a book]
Funktionale R�ckverfolgbarkeit von Prozessketten. Ein daten- und modellbasierter Ansatz
In: Internet of Production - Turning Data into Value : Statusberichte aus der Produktionstechnik 2020, 209-225, 2020 Authors and Contributors
Bergs, Thomas
Brimmers, Jens
Kappmeyer, Gregor
L�penhaus, Christoph
Scheffler, Florian
et al.
Source
[Contribution to a book]
Biologische Transformation in der Produktion
In: Internet of Production - Turning Data into Value : Statusberichte aus der Produktionstechnik 2020, 137-157, 2020 Authors and Contributors
Brecher, Christian
Broos, Alexander
Essig, Bernd
Hofmann, Boris
Mallmann, Guilherme
et al.
Source
[Contribution to a book]
Architektur einer vernetzten, adaptiven Produktion
In: Internet of Production - Turning Data into Value : Statusberichte aus der Produktionstechnik 2020, 4-20, 2020 Authors and Contributors
Schmitt, Robert H.
K�nig, Niels
Jung, Sven
Peterek, Martin Joachim
Source
[Contribution to a book]
Analytics in der Produktion
In: Internet of Production - Turning Data into Value : Statusberichte aus der Produktionstechnik 2020, 186-208, 2020 Authors and Contributors
Brecher, Christian
Biernat, Benedikt Markus Hubert
Fey, Marcel
Ochel, Janis
Wiesch, Marian
Source
[Contribution to a book]
Always Beta - DevOps f�r cyber-physische Produkte
In: Internet of Production - Turning Data into Value : Statusberichte aus der Produktionstechnik 2020, 114-136, 2020 Authors and Contributors
Schuh, G�nther
Ays, Laura Johanna
Becker, Annika
Britz, Alexander
D�lle, Christian
et al.
Source
[Contribution to a conference proceedings]
Quantification of defects in CFRP plates using Lock-In thermography and artificial neural networks
In: [Euspen's 20th International Conference & Exhibition, EUSPEN ICE2020, 2020-06-08 - 2020-06-12, Geneva, Switzerland], 2020 Authors and Contributors
Wolfschl�ger, Dominik
Peterek, Martin Joachim
Schmitt, Robert H.
Kromberg, Konstantin
Source
[Journal Article]
Surface Integrity of AISI 52100 Bearing Steel after Robot-Based Machine Hammer Peening
In: Journal of manufacturing and materials processing, 4 (2), 61, 2020
[DOI: 10.3390/jmmp4020061] Authors and Contributors
Mannens, Robby Norbert (Corresponding author)
Uhlmann, Lars
Lambers, Felix
Feuerhack, Andreas
Bergs, Thomas
Source
[Contribution to a conference proceedings, Journal Article]
Klassifikation von Gr�bchensch�den an Zahnr�dern mittels Vibrationsmessungen
In: Technisches Messen : tm, 87 (Supplement 1), S56-S61, 2020
[DOI: 10.1515/teme-2020-0026] Authors and Contributors
Grzeszkowski, Mateusz (Corresponding author)
Nowoisky, Sebastian
Scholzen, Philipp Alexander
Kappmeyer, Gregor
G�hmann, Clemens (Corresponding author)
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Adaptive process monitoring for laser micro structuring of electrical steel using Optical Coherence Tomography with non-colour corrected lenses
In: Procedia CIRP, 94, 748-752, 2020
[DOI: 10.1016/j.procir.2020.09.141] Authors and Contributors
Zechel, Fabian (Corresponding author)
Kunze, Rouwen
Widmann, Patrick
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Requirements for Economic Analysis of 5G Technology Implementation in Smart Factories from End-User Perspective
In: 2020 IEEE 31st Annual International Symposium on Personal, Indoor and Mobile Radio Communications / IEEE PIMRC - IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, 31 August-3 September 2020, London, UK ; IEEE ComSoc - IEEE Communications Society, IEEE, 7 Seiten, 2020
[DOI: 10.1109/PIMRC48278.2020.9217281] Authors and Contributors
Kiesel, Raphael (Corresponding author)
Schmitt, Robert H. (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Experimental investigations on the influence of temperature for Laser Metal Deposition with lateral Inconel 718 wire feeding
In: Procedia CIRP, 94, 29-34, 2020
[DOI: 10.1016/j.procir.2020.09.007] Authors and Contributors
Bergs, Thomas
Kammann, Sebastian (Corresponding author)
Fraga, Gabriel
Riepe, Jan
Arntz, Kristian
Source
[Book, Dissertation / PhD Thesis]
Skalierbarkeit von Rolle-zu-Rolle-UV-Nano-Imprint-Prozessen
In: Ergebnisse aus der Produktionstechnik 31/2020, 2020
[DOI: 10.18154/RWTH-2020-12550] Authors and Contributors
Bastuck, Thomas
Source
[Book, Dissertation / PhD Thesis]
Auslegung der Makro- und Mikrogeometrie von W�lzfr�serschneiden
In: Ergebnisse aus der Produktionstechnik 32/2020, 2020 Authors and Contributors
K�hn, Felix
Source
[Contribution to a book, Contribution to a conference proceedings]
Punch-to-Punch Variations in Stamping Processes
In: SAMI 2020 : IEEE 18th World Symposium on Applied Machine Intelligence and Informatics : proceedings : January 23-25, 2020, Herl’any, Slovakia / organizers: Technical University of Košice (Slovakia), �buda University (Budapest, Hungary), University Research and Innovation Center, Antal Bejczy Center for Intelligent Robotics, ELFA Ltd. (Košice, Slovakia), Slovak Academy of Sciences, SMC TC on Computational Cybernetics, IEEE Computational Intelligence Chapter of Czechoslovak Section ; sponsors: IEEE Hungary Section, IEEE Joint Chapter of IES and RAS Hungary, IEEE Control Systems Chapter Hungary, IEEE SMC Chapter Hungary ; technical co-sponsor: IEEE SMC Society ; publisher: IEEE .2020.9108761, 000213-000218, 2020
[DOI: 10.1109/SAMI48414.2020.9108761] Authors and Contributors
Bergs, Thomas (Corresponding author)
Niemietz, Philipp (Corresponding author)
Kaufman, Tobias (Corresponding author)
Trauth, Daniel (Corresponding author)
Source
[Contribution to a book, Journal Article]
Comparison of Different Manufacturing Processes of AISI 4140 Steel with Regard to Surface Modification and Its Influencing Depth
In: Metals : open access journal, 10 (7), 895, 2020
[DOI: 10.3390/met10070895] Authors and Contributors
Borchers, Florian
Clausen, Brigitte (Corresponding author)
Eckert, Sandro
Ehle, Lisa Christine
Epp, Jeremy
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
AI-based Framework for Deep Learning Applications in Grinding
In: SAMI 2020 : IEEE 18th World Symposium on Applied Machine Intelligence and Informatics : proceedings : January 23-25, 2020, Herl’any, Slovakia / organizers: Technical University of Košice (Slovakia), �buda University (Budapest, Hungary), University Research and Innovation Center, Antal Bejczy Center for Intelligent Robotics, ELFA Ltd. (Košice, Slovakia), Slovak Academy of Sciences, SMC TC on Computational Cybernetics, IEEE Computational Intelligence Chapter of Czechoslovak Section ; sponsors: IEEE Hungary Section, IEEE Joint Chapter of IES and RAS Hungary, IEEE Control Systems Chapter Hungary, IEEE SMC Chapter Hungary ; technical co-sponsor: IEEE SMC Society ; publisher: IEEE, 2020
[DOI: 10.1109/SAMI48414.2020.9108743] Authors and Contributors
Kaufmann, Tobias (Corresponding author)
Sahay, S. (Corresponding author)
Niemietz, Philipp (Corresponding author)
Trauth, Daniel (Corresponding author)
Maa�, W. (Corresponding author)
et al.
Source
[Book, Dissertation / PhD Thesis]
Modellbasierte planungsintegrierte und steuerungstechnische St�rgr��enkompensation bei robotergest�tzten Bearbeitungsprozessen
In: Ergebnisse aus der Produktionstechnik 34/2020, 2020 Authors and Contributors
Lienenl�ke, Lars
Source
[Journal Article]
Prototype for dual digital traceability of metrology data using X.509 and IOTA
In: CIRP annals, manufacturing technology, 69 (1), 449-452, 2020
[DOI: 10.1016/j.cirp.2020.04.104] Authors and Contributors
Peterek, Martin Joachim (Corresponding author)
Montavon, Benjamin Leendert
Source
[Journal Article]
Data-based description of process performance in end-to-end order processing
In: CIRP annals, manufacturing technology, 69 (1), 381-384, 2020
[DOI: 10.1016/j.cirp.2020.03.013] Authors and Contributors
Schuh, G�nther (Corresponding author)
G�tzlaff, Andreas
Schmitz, Seth
van der Aalst, Wil M. P.
Source
[Journal Article]
Cutting force based surface integrity soft-sensor when hard machining AISI 4140
In: Technisches Messen : tm, 87 (11), 683-693, 2020
[DOI: 10.1515/teme-2020-0050] Authors and Contributors
Meurer, Markus Joachim
Tekkaya, Berk (Corresponding author)
Augspurger, Thorsten
Pullen, Thomas
Schraknepper, Daniel
et al.
Source
[Book, Dissertation / PhD Thesis]
Methode zur Beschreibung und Optimierung des Anregungsverhaltens von Planetengetrieben
In: Ergebnisse aus der Produktionstechnik 30/2020, 2020 Authors and Contributors
Piel, Daniel
Source
[Preprint]
Distributed Ledger Technologien im Rheinischen Revier in Nordrhein-Westfalen - Produzierende Industrie 2020, 2020
[DOI: 10.31224/osf.io/5mdw6] Authors and Contributors
Trauth, Daniel
Niemietz, Philipp
Mayer, Johannes
Beckers, Alexander
Prinz, Wolfgang
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Precision glass molding of infrared optics with anti-reflective microstructures
In: Optical Manufacturing and Testing XIII : 24 August-4 September 2020, online only, United States / Dae Wook Kim, Rolf Rascher (editors) ; sponsored and published by: SPIE, 8 Seiten + Presentation, 2020
[DOI: 10.1117/12.2570519] Authors and Contributors
Rojacher, Cornelia (Corresponding author)
Vu, Anh Tuan
Grunwald, Tim
Bergs, Thomas
Source
[Book, Dissertation / PhD Thesis]
Auslegung prototypischer Produktinkremente im Kontext agiler Entwicklungsprojekte
In: Ergebnisse aus der Produktionstechnik 29/2020, 2020 Authors and Contributors
Schl��er, Elmar Sebastian
Source
[Book, Dissertation / PhD Thesis]
Systemdynamische Modellierung des reaktiven Fehlermanagements in Produktionssystemen
In: Ergebnisse aus der Produktionstechnik 27/2020, 2020 Authors and Contributors
Gl�ckner, Henrik Stefan
Source
[Contribution to a conference proceedings, Journal Article]
Development of a Methodology for Strain Field Analysis during Orthogonal Cutting
In: Procedia CIRP, 87, 444-449, 2020 Authors and Contributors
Meurer, Markus Joachim (Corresponding author)
Augspurger, Thorsten
Tekkaya, Berk
Schraknepper, Daniel
Martins Pontes Lima, Andr� Eug�nio
et al.
Source
[Book, Dissertation / PhD Thesis]
Untersuchungen zum diodenlaserbasierten in-situ Tapelegen als Produktionstechnologie f�r einen gro�serienf�higen hybriden Leichtbau
In: Ergebnisse aus der Produktionstechnik 28/2020, 2020
[DOI: 10.18154/RWTH-2020-11789] Authors and Contributors
Peters, Tido Malte
Source
[Journal Article]
Effizientere Produktion mit Digitalen Schatten
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 115 (S1), 105-107, 2020
[DOI: 10.3139/104.112339] Authors and Contributors
Schuh, G�nther
H�fner, Constantin
Hopmann, Christian
Rumpe, Bernhard
Brockmann, Matthias
et al.
Source
[Journal Article]
Modelling of Grain Size Evolution with Different Approaches via FEM When Hard Machining of AISI 4140
In: Metals : open access journal, 10 (10), 1296, 2020
[DOI: 10.3390/met10101296] Authors and Contributors
Tekkaya, Berk (Corresponding author)
Meurer, Markus Joachim
M�nstermann, Sebastian
Source
[Journal Article]
The StemCellFactory: A Modular System Integration for Automated Generation and Expansion of Human Induced Pluripotent Stem Cells
In: Frontiers in Bioengineering and Biotechnology, 8, 580352, 2020
[DOI: 10.3389/fbioe.2020.580352] Authors and Contributors
Elanzew, Andreas
Nie�ing, Bastian
Langendoerfer, Daniel
Rippel, Oliver
Piotrowski, Tobias
et al.
Source
[Contribution to a conference proceedings]
Process Mining for Production Processes in the Automotive Industry
In: [Industry Forum of 18th International Conference on Business Process Management, BPM 2020], 2020 Authors and Contributors
Uysal, Merih Seran
van Zelst, Sebastiaan Johannes
Brockhoff, Tobias
Farhang Ghahfarokhi, Anahita
Pourbafrani, Mahsa
et al.
Source
[Book, Dissertation / PhD Thesis]
Datenbasierte Prognose und Planung auftragsspezifischer �bergangszeiten
In: Ergebnisse aus der Produktionstechnik 26/2020, 2020 Authors and Contributors
Sauermann, Frederick Christian
Source
[Book, Dissertation / PhD Thesis]
Kennzahlenbasiertes Bewertungssystem der Leistungsf�higkeit verketteter Fertigungssysteme in der mechanischen Fertigung des Werkzeugbaus
In: Ergebnisse aus der Produktionstechnik 25/2020, 2020 Authors and Contributors
Pr�mmer, Marcel
Source
[Contribution to a conference proceedings, Journal Article]
Clamping and substrate plate system for continuous additive build-up and post-processing of metal parts
In: Procedia CIRP, 93, 108-113, 2020 Authors and Contributors
Wollbrink, Moritz
Maslo, Semir
Zimmer, Daniel
Abbas, Karim
Arntz, Kristian
et al.
Source
[Journal Article]
Application cases of biological transformation in manufacturing technology
In: CIRP journal of manufacturing science and technology : CIRP-JMST, 31, 68-77, 2020
[DOI: 10.1016/j.cirpj.2020.09.010] Authors and Contributors
Bergs, Thomas (Corresponding author)
Schwaneberg, Ulrich
Barth, Sebastian
Hermann, Lennard
Grunwald, Tim
et al.
Source
[Book]
Integrative und selbstregulierende Produktionsanlage zur Herstellung von FVK-Bauteilen in gro�en St�ckzahlen : iComposite 4.0, 2020 Authors and Contributors
Brecher, Christian (Editor)
Hopmann, Christian (Editor)
Emonts, Michael Gustav (Editor)
Fischer, Kai (Editor)
Source
[Journal Article]
Contact Fatigue Strength of Austempered Ductile Iron (ADI) in Gear Applications
In: Metals : open access journal, 10 (9), 1147, 2020
[DOI: 10.3390/met10091147] Authors and Contributors
Goergen, Fabian (Corresponding author)
Mevissen, Dieter
Masaggia, Stefano
Veneri, Enrico
Brimmers, Jens
et al.
Source
[Book, Dissertation / PhD Thesis]
Fertigungsgerechte Zahnfu�optimierung von Stirnr�dern
In: Ergebnisse aus der Produktionstechnik 21/2020, 2020 Authors and Contributors
Pollaschek, Jonas
Source
[Contribution to a conference proceedings, Journal Article]
Clamping and substrate plate system for continuous additive build-up and post-processing of metal parts
In: Procedia CIRP, 93, 108-113, 2020
[DOI: 10.1016/j.procir.2020.04.015] Authors and Contributors
Wollbrink, Moritz (Corresponding author)
Maslo, Semir
Zimmer, Daniel
Abbas, Karim
Arntz, Kristian
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Design model for a value chain-oriented quality management in global tooling
In: Procedia CIRP, 93, 1013-1018, 2020
[DOI: 10.1016/j.procir.2020.04.011] Authors and Contributors
Bergs, Thomas
Pr�mmer, Marcel (Corresponding author)
L�rken, Christian
Arntz, Kristian
Source
[Book]
Tooling in Germany
In: Toolink in Germany, 2020, 2020 Authors and Contributors
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Pr�mmer, Marcel
Goertz, David
Boshof, Julian
et al.
Source
[Journal Article]
Lebensdauerverl�ngerung von Eisenbahnr�dern durch Laserauftragschwei�en mit Draht
In: ZEVrail, 144(10), 400-405, 2020 Authors and Contributors
Shamshoom, Jeries
Gipperich, Marius
Huberty, Benoit
Schindler, Christian
Bergs, Thomas
Source
[Book, Dissertation / PhD Thesis]
Spezifikation von intelligenten Produkten im Maschinenbau
In: Schriftenreihe Rationalisierung 175, 2020 Authors and Contributors
Hicking, Jan
Source
[Contribution to a book, Contribution to a conference proceedings]
Development of an Indicator Model for Anticipation of Strategy Implementation Failures
In: 2020 IEEE 7th International Conference on Industrial Engineering and Applications : ICIEA 2020 : April 16-21, 2020, Bangkok, Thailand / IEEE, 533-559, 2020
[DOI: 10.1109/ICIEA49774.2020.9101992] Authors and Contributors
Riesener, Michael
D�lle, Christian
Tittel, Jonas (Corresponding author)
Schuh, G�nther
Reuss, Maximilian
et al.
Source
[Book, Dissertation / PhD Thesis]
Prozessmodell f�r den Werkzeugbau im iterativen Produktentwicklungsprozess
In: Ergebnisse aus der Produktionstechnik 23/2020, 2020 Authors and Contributors
de Lange, Johan
Source
[Contribution to a conference proceedings, Journal Article]
Development of a Methodology for Strain Field Analysis during Orthogonal Cutting
In: Procedia CIRP, 87, 444-449, 2020
[DOI: 10.1016/j.procir.2020.03.004] Authors and Contributors
Meurer, Markus Joachim (Corresponding author)
Augspurger, Thorsten
Tekkaya, Berk
Schraknepper, Daniel
Martins Pontes Lima, Andr� Eug�nio
et al.
Source
[Book, Dissertation / PhD Thesis]
Beschleunigungsbasierte Prozessauslegung des ungef�hrten Vibrationsgleitschleifprozesses
In: Ergebnisse aus der Produktionstechnik 24/2020, 2020 Authors and Contributors
Lachenmaier, Maximilian
Source
[Journal Article]
Smart Electromobility : Interactive ecosystem of research, innovation, engineering, and entrepreneurship
In: International journal on interactive design and manufacturing : IJIDeM, 14 (4), 1443-1459, 2020
[DOI: 10.1007/s12008-020-00710-8] Authors and Contributors
Curiel Ramirez, Luis Alberto
Ramirez-Mendoza, Ricardo A. (Corresponding author)
Bustamante-Bello, M. Rogelio
Morales-Menendez, Ruben
Galvan, Jose Alfredo
et al.
Source
[Book, Dissertation / PhD Thesis]
Modellierung des Risikos thermischer Verletzungen bei minimalinvasiven Eingriffen an der lateralen Sch�delbasis
In: Ergebnisse aus der Produktionstechnik 12/2020, 2020 Authors and Contributors
Voigtmann, Christoph Michael
Source
[Journal Article]
Urban production : State of the art and future trends for urban factories
In: CIRP annals, manufacturing technology, 69 (2), 764-787, 2020
[DOI: 10.1016/j.cirp.2020.05.003] Authors and Contributors
Herrmann, Christoph (Corresponding author)
Juraschek, Max
Burggr�f, Peter
Kara, Sami
Source
[Journal Article]
Energy efficient machine tools
In: CIRP annals, manufacturing technology, 69 (2), 646-667, 2020
[DOI: 10.1016/j.cirp.2020.05.008] Authors and Contributors
Denkena, Berend (Corresponding author)
Abele, Eberhard
Brecher, Christian
Dittrich, Marc-Andr�
Kara, Sami
et al.
Source
[Journal Article]
Systematic generation of manufacturing changes for safety-critical components
In: Journal of manufacturing processes, 56, 270-280, 2020
[DOI: 10.1016/j.jmsy.2020.06.008] Authors and Contributors
Hermann, Lennard
Rey, Jan
Barth, Sebastian
Bergs, Thomas
Source
[Journal Article]
Application of two promising Reinforcement Learning algorithms for load shifting in a cooling supply system
In: Energy and buildings, 229, 110490, 2020
[DOI: 10.1016/j.enbuild.2020.110490] Authors and Contributors
Schreiber, Thomas Bruno (Corresponding author)
Eschweiler, S�ren
Baranski, Marc
M�ller, Dirk
Source
[Contribution to a book, Contribution to a conference proceedings]
OCT measurement of aspheric polymer lenses for adaptive assembly of micro optical imaging objectives
In: Optical Components and Materials XVII : 4-6 February 2020, San Francisco, California, United States / Shibin Jiang, Michel J.F. Digonnet (editors) ; sponsored and published by: SPIE, 1127613, 2020
[DOI: 10.1117/12.2546119] Authors and Contributors
Riediger, Max
Berger, Marvin
Hoeren, Maximilian
K�nig, Niels
Zontar, Daniel
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Offline development of active alignment based on empirical virtual environments
In: High-Power Diode Laser Technology XVIII : 2-4 February 2020, San Francisco, California, United States / Mark S. Zediker (editor) ; sponsored and published by: SPIE, 112620B, 2020
[DOI: 10.1117/12.2546809] Authors and Contributors
Zontar, Daniel
Tavakolian, Armin
Hoeren, Maximilian
Brecher, Christian
Source
[Journal Article]
Interactive urban route evaluation system for smart electromobility
In: International journal on interactive design and manufacturing, 14 (4), 1271-1283, 2020
[DOI: 10.1007/s12008-020-00708-2] Authors and Contributors
Curiel Ramirez, Luis Alberto (Corresponding author)
Ramirez-Mendoza, Ricardo A.
Bustamante-Bello, M. Rogelio
Morales-Menendez, Ruben
Lopez-Aguilar, Ariel A.
et al.
Source
[Book, Dissertation / PhD Thesis]
Dry full forward extrusion by textured workpieces and self-lubricating tool coatings
In: Ergebnisse aus der Produktionstechnik 22/2020, 2020 Authors and Contributors
Hild, Rafael
Source
[Journal Article]
Die German University of Technology in Oman (GUtech)
In: Political science applied : PSCA, 10, 32-35, 2020 Authors and Contributors
Schmitt, Robert H.
Adam, Tobias
Source
[Talk (non-conference)]
Die richtigen Daten zur richtigen Zeit - Wie Daten mit der MyDataEconomy-Plattform monetarisiert werden k�nnen
In: Executive MBA / RWTH Business School Aachen 2020-10-07 - 2020-10-07, 2020 Authors and Contributors
Trauth, Daniel
Source
[Talk (non-conference)]
Daten sind das neue �l - Wie man die digitale Wirtschaft steuert, antreibt und bewegt
In: Meeting Rotary Club Weinheim Weinheim 2020-10-13 - 2020-10-13, 2020 Authors and Contributors
Trauth, Daniel
Source
[Book, Dissertation / PhD Thesis]
Logistikeffizienz der Produktionssteuerung in der variantenreichen Kleinserienproduktion
In: Ergebnisse aus der Produktionstechnik 20/2020, 2020 Authors and Contributors
Welter, Tobias
Source
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Investigation of the Mechanical Punch Loads during Fine Blanking of High-Strength Steels with Cemented Carbide
In: Procedia manufacturing, 34, 90-100, 2020 Authors and Contributors
Baer, Oksana
Feuerhack, Andreas
Voigts, Herman Otto
Bergs, Thomas
Source
[Journal Article]
NFDI4Ing : the National Research Data Infrastructure for Engineering Sciences
In: Zenodo : research shared, 2020, 1-116, 2020
[DOI: 10.5281/ZENODO.4015201] Authors and Contributors
Schmitt, Robert H.
Anthofer, Verena
Auer, S�ren
Baskaya, Sait
Bischof, Christian
et al.
Source
[Talk (non-conference)]
The Right Data At The Right Time - How Future Shaping AI Is Made
In: OUT OF THE BOX.NRW Award Finale K�ln 2020-09-02 - 2020-09-02, 2020 Authors and Contributors
Trauth, Daniel
Source
[Contribution to a conference proceedings, Journal Article]
Simulation of Thermal Induced Microstructure Evolution within the Heat Affected Zone
In: Procedia CIRP, 82, 432-437, 2019 Authors and Contributors
Bergs, Thomas
Mohammadnejad, Mehnoush
He�, Dennis Raphael
Harst, Simon Christoph
Klink, Andreas
Source
[Contribution to a conference proceedings, Journal Article]
Stamping Process Modelling in an Internet of Production
In: Procedia manufacturing, 49, 61-68, 2020
[DOI: 10.1016/j.promfg.2020.06.012] Authors and Contributors
Niemietz, Philipp (Corresponding author)
Pennekamp, Jan
Kunze, Ike Sebastian
Trauth, Daniel
Wehrle, Klaus
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Private Multi-Hop Accountability for Supply Chains
In: IEEE International Conference on Communications workshops (ICC) : proceedings : Dublin, Ireland, 7-11 June 2020 / IEEE, 7 Seiten, 2020
[DOI: 10.1109/ICCWorkshops49005.2020.9145100] Authors and Contributors
Pennekamp, Jan (Corresponding author)
Bader, Lennart (Corresponding author)
Matzutt, Roman (Corresponding author)
Niemietz, Philipp (Corresponding author)
Trauth, Daniel (Corresponding author)
et al.
Source
[Book, Dissertation / PhD Thesis]
Elektrochemisches Schneiden mit einer Drahtelektrode
In: Ergebnisse aus der Produktionstechnik 18/2020, 2020 Authors and Contributors
Herrig, Tim
Source
[Book, Dissertation / PhD Thesis]
Gestaltung typenbasierter Transferprozesse von Innovationen aus firmeninternen Inkubatoren
In: Ergebnisse aus der Produktionstechnik 19/2020, 2020 Authors and Contributors
Vogt, Florian
Source
[Journal Article]
A low-cost camera-based tracking theodolite for large-scale metrology applications
In: International journal of computer integrated manufacturing : IJCIM, 33 (9), 869-879, 2020
[DOI: 10.1080/0951192X.2020.1803504] Authors and Contributors
Bodenbenner, Matthias Stefan (Corresponding author)
Montavon, Benjamin Leendert
Peterek, Martin Joachim
Schmitt, Robert H.
Source
[Journal Article]
Design and Development of a High Efficiency Air Turbine Spindle for Small-Part Machining
In: International journal of precision engineering and manufacturing-green technology : IJPEM-GT, 7 (5), 915-928, 2019
[DOI: 10.1007/s40684-019-00105-5] Authors and Contributors
Harris, Paul
Wintterer, Michael
Jasper, David Michael
Linke, Barbara
Brecher, Christian
et al.
Source
[Journal Article]
Study of the electrolyte flow at narrow openings during electrochemical machining
In: CIRP annals, manufacturing technology, 69 (1), 157-160, 2020
[DOI: 10.1016/j.cirp.2020.04.075] Authors and Contributors
Klink, Andreas (Corresponding author)
Heidemanns, Lukas Franz
Rommes, Bob
Source
[Journal Article]
Development of a process signature for electrochemical machining
In: CIRP annals, manufacturing technology, 69 (1), 153-156, 2020
[DOI: 10.1016/j.cirp.2020.04.078] Authors and Contributors
Bergs, Thomas (Corresponding author)
Harst, Simon
Source
[Journal Article]
Methodological Assessment of Data Suitability for Defect Prediction
In: Quality innovation prosperity : QIP = Kvalita inov�cia prosperita, 24 (2), 170-185, 2020
[DOI: 10.12776/qip.v24i2.1443] Authors and Contributors
Schlegel, Peter (Corresponding author)
Buschmann, Daniel (Corresponding author)
Ellerich, Max (Corresponding author)
Schmitt, Robert H. (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Automated PM-fiber array assembly with high-precision four DOF alignment
In: Optical Interconnects XX : 4-6 February 2020, San Francisco, California, United States / Henning Schr�der, Ray T. Chen (editors) ; sponsored and published by: SPIE, 2020
[DOI: 10.1117/12.2546643] Authors and Contributors
Berger, Marvin (Corresponding author)
Alippi, Andrea
Haag, Sebastian
Hoeren, Maximilian
Mueller, Tobias
et al.
Source
[Journal Article]
Automation, Monitoring, and Standardization of Cell Product Manufacturing
In: Frontiers in Bioengineering and Biotechnology, 8, 811, 2020
[DOI: 10.3389/fbioe.2020.00811] Authors and Contributors
Doulgkeroglou, Meletios-Nikolaos
Di Nubila, Alessia
Niessing, Bastian
K�nig, Niels
Schmitt, Robert H.
et al.
Source
[Journal Article]
Performance management on the shop floor : an investigation of KPI perception among managers and employees
In: International journal of quality and service sciences, 12 (4), 461-473, 2020
[DOI: 10.1108/IJQSS-04-2020-0051] Authors and Contributors
Ohlig, Jasmin
Hellebrandt, Thomas Sven
Metzmacher, Amelie Isabel
P�tters, Patrick
Heine, Ina
et al.
Source
[Book, Dissertation / PhD Thesis]
Vertrauen in Unternehmensnetzwerken durch Blockchain-Technologie
In: Schriftenreihe Rationalisierung 174, 2020 Authors and Contributors
Wieninger, Simon Sebastian
Source
[Journal Article]
Excellence cluster "Internet of Production" (IoP) of the RWTH Aachen - The digital world and production of the future
In: Thermal spray bulletin, 13 (1), 12-14, 2020 Authors and Contributors
Brockmann, Matthias
Wassong, Anja
Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Source
[Book, Dissertation / PhD Thesis]
Methodik zur hochiterativen Gestaltung von Fertigungsprozessfolgen
In: Ergebnisse aus der Produktionstechnik 16/2020, 2020 Authors and Contributors
Rey, Jan
Source
[Report]
Verzahnungsmodellierung f�r Systemsimulation - Abschlussbericht, 2020 Authors and Contributors
Andary, Faysal
Jacobs, Georg
Trippe, Moritz Johannes
Wischmann, Stefan Tobias
Berroth, Joerg Karl
Source
[Book, Dissertation / PhD Thesis]
Datenstrukturmodell f�r den digitalen Schatten der Auftragsabwicklung von Werkzeugbaubetrieben
In: Ergebnisse aus der Produktionstechnik 11/2020, 2020 Authors and Contributors
Kelzenberg, Christoph Maximilian Bernd
Source
[Journal Article]
Prozessuale Grundtypen f�r eine hybride Produktentwicklung
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 115 (6), 409-412, 2020
[DOI: 10.3139/104.112355] Authors and Contributors
Riesener, Michael
D�lle, Christian
Ays, Laura Johanna (Corresponding author)
Schuh, G�nther
Source
[Journal Article]
Agile Transformation in produzierenden Unternehmen
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 115 (6), 367-370, 2020
[DOI: 10.3139/104.112350] Authors and Contributors
Riesener, Michael
D�lle, Christian
Becker, Annika (Corresponding author)
Schuh, G�nther
Source
[Contribution to a conference proceedings, Journal Article]
Experimental Investigation of Oxide Layer Formation Depending on Temperature Holding Time during Inductive Heating of Annealed 16MnCr5
In: Procedia manufacturing, 47, 1328-1333, 2020
[DOI: 10.1016/j.promfg.2020.04.253] Authors and Contributors
Weiser, Ingo Felix (Corresponding author)
Hild, Rafael
Feuerhack, Andreas
Trauth, Daniel
Bergs, Thomas
Source
[Book, Dissertation / PhD Thesis]
Optische Koh�renztomographie f�r Laserdurchstrahlschwei�prozesse bei Kunststoffen
In: Ergebnisse aus der Produktionstechnik 15/2020, 2020 Authors and Contributors
Ackermann, Philippe
Source
[Book, Dissertation / PhD Thesis]
Optische Koh�renztomographie f�r die Quantifizierung funktioneller und morphologischer Eigenschaften von humanem Knorpelgewebe
In: Ergebnisse aus der Produktionstechnik 13/2020, 2020 Authors and Contributors
Brill, Nicolai-Andr�
Source
[Journal Article]
Experimental investigation of specific cutting forces and estimation of the heat partitioning under increasing tool wear in machining nickel-based super alloy IN 718
In: Production engineering, 14 (4), 491-498, 2020
[DOI: 10.1007/s11740-020-00971-y] Authors and Contributors
Augspurger, Thorsten (Corresponding author)
Schraknepper, Daniel
Bergs, Thomas
Source
[Book, Dissertation / PhD Thesis]
Additive Prozesskette zur Herstellung von thermoplastischen Faserverbundbauteilen-Hybridbauteilen
In: Ergebnisse aus der Produktionstechnik 14/2020, 2020
[DOI: 10.18154/RWTH-2020-07988] Authors and Contributors
Janssen, Henning
Source
[Report]
Monetarisierung von Fertigungsdaten: Bausteine, Herausforderungen und L�sungen f�r industrielle Datenmarktpl�tze f�r produzierende Industrien, 2020 Authors and Contributors
Trauth, Daniel
Bergs, Thomas
G�lpen, Christian
Maa�, Wolfgang
Mayer, Johannes
et al.
Source
[Report]
Monetization of manufacturing data: Components, Challenges and Solutions for Industrial Data Marketplaces in the Manufacturing Industry, 2020 Authors and Contributors
Trauth, Daniel
Bergs, Thomas
G�lpen, Christian
Maa�, Wolfgang
Mayer, Johannes
et al.
Source
[Journal Article]
Application of lean methods : a business game study in German companies
In: Management and production engineering review, 11 (2), 3-10, 2020
[DOI: 10.24425/MPER.2020.133724] Authors and Contributors
P�tters, Patrick (Corresponding author)
Schmitt, Robert H.
Leyendecker, Bert
Source
[Contribution to a book]
Monetarisierung von Fertigungsdaten
In: Internet of Production - Turning Data into Value: Statusberichte aus der Produktionstechnik 2020 / Thomas Bergs, Christian Brecher, Robert Schmitt, G�nther Schuh (Herausgeber), 340-364, 2020
[DOI: 10.18154/RWTH-2020-07877] Authors and Contributors
Trauth, Daniel (First author)
Bergs, Thomas
G�lpen, Christian
Maa�, Wolfgang
Mayer, Johannes
et al.
Source
[Book, Dissertation / PhD Thesis]
Disruptionsorientierter Spezifikationsprozess technischer Systeme
In: Ergebnisse aus der Produktionstechnik 17/2020, 2020 Authors and Contributors
Wetterney, Tim
Source
[Contribution to a book, Contribution to a conference proceedings]
Konzept einer Autonomen Industrie 4.0-Komponente auf Basis Agenten-basierter Ans�tze
In: Entwurf komplexer Automatisierungssysteme : EKA 2020 : Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen : 16. Fachtagung mit Spezial-Workshop, 2020 Authors and Contributors
Wein, Stephan
Dassen, Yannick
Miny, Torben Heinz (Corresponding author)
Storms, Simon
Brecher, Christian
Source
[Book, Dissertation / PhD Thesis]
Gestaltungsmodell zur digitalen Vernetzung von Werkzeugbaubetrieben mit Lieferanten
In: Ergebnisse aus der Produktionstechnik 4/2020, 2020 Authors and Contributors
Schultes, Thilo Konrad
Source
[Journal Article]
In-Process Tool Wear Measurement System Based on Image Analysis for CNC Drilling Machines
In: IEEE transactions on instrumentation and measurement, 69 (8), 5579-5588, 2019
[DOI: 10.1109/TIM.2019.2961572] Authors and Contributors
Lins, Romulo Goncalves (Corresponding author)
Guerreiro, Bruno
Marques de Araujo, Paulo Ricardo
Schmitt, Robert H.
Source
[Contribution to a book]
Monetarisierung von Maschinendaten: Secure-Audit-Trails und Micropayments beim Feinschneiden
In: Digitale Produktion : Nutzenversprechen, L�sungsans�tze, soziale Folgen / herausgegeben von Alexander Klein, Torsten Niechoj, 2020 Authors and Contributors
Trauth, Daniel
Unterberg, Martin Christian
Mattfeld, Patrick-Marcel
Source
[Contribution to a book]
Fertigungstechnik 4.0: Mit sicheren Audit-Trails und verteilten Fertigungsketten zur Fertigungs�konomie
In: Handbuch Industrie 4.0 : Recht, Technik, Gesellschaft / Walter Frenz, Hrsg., 517-541, 2020
[DOI: 10.1007/978-3-662-58474-3_26] Authors and Contributors
Bergs, Thomas
Klocke, Fritz
Trauth, Daniel (Corresponding author)
Rey, Jan (Corresponding author)
Source
[Journal Article]
Development of a hybrid DLT cloud architecture for the automated use of finite element simulation as a service for fine blanking
In: The international journal of advanced manufacturing technology, 108 (11/12), 3717-3724, 2020
[DOI: 10.1007/s00170-020-05567-5] Authors and Contributors
Stanke, Joachim Patrick Thomas (Corresponding author)
Unterberg, Martin Christian
Trauth, Daniel
Bergs, Thomas
Source
[Book, Dissertation / PhD Thesis]
Messung und Darstellung der Qualit�t von betrieblichen Informationsfl�ssen
In: Schriftenreihe Rationalisierung 173, 2020 Authors and Contributors
Birkmeier, Martin
Source
[Contribution to a book, Contribution to a conference proceedings]
A Research Framework for Human Aspects in the Internet of Production : An Intra-company Perspective
In: Advances in Manufacturing, Production Management and Process Control : Proceedings of the AHFE 2020 Virtual Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, July 16-20, 2020, USA / Beata Mrugalska, Stefan Trzcielinski, Waldemar Karwowski, Massimo Di Nicolantonio, Emilio Rossi, Editors, 3-17, 2020
[DOI: 10.1007/978-3-030-51981-0_1] Authors and Contributors
Brauner, Philipp
Brillowski, Florian Sascha
Dammers, Hannah
K�nigs, Peter
Kordtomeikel, Frauke Carole
et al.
Source
[Journal Article]
Dry forming of low alloy steel materials by full forward impact extrusion with self-lubricating tool coatings and structured workpieces
In: Dry metal forming open access journal : DMFOAJ, 6, 69-98, 2020
[DOI: 10.26092/elib/167] Authors and Contributors
Bobzin, Kirsten
Klocke, Fritz
Bergs, Thomas
Br�gelmann, Tobias
Feuerhack, Andreas
et al.
Source
[Journal Article]
A review on enabling technologies for resilient and traceable on-machine measurements
In: Journal of machine engineering, 20 (2), 5-17, 2020
[DOI: 10.36897/jme/122768] Authors and Contributors
Dahlem, Jan Philipp (Corresponding author)
Emonts, Dominik
Sanders, Mark Pascal
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Konzept f�r die automatisierte Erstellung von Verwaltungsschalen-Teilmodellen mit Hilfe dom�nenspezifischer Transformationssprachelemente
In: Automation 2020 : 21. Leitkongress Mess- u. Automatisierungstechnik : shaping automation for our future, 30. Juni und 01. Juli 2020 / VDI VDE Mess- und Automatisierungstechnik, 393-406, 2020
[DOI: 10.51202/9783181023754-393] Authors and Contributors
Miny, Torben Heinz (Corresponding author)
Thies, Michael Hermann
Epple, Ulrich
Wein, Stephan
Diedrich, Christian
Source
[Contribution to a conference proceedings]
Holistic data infrastructure and analytics system for rail freight transport
In: ITS European Congress : virtual, on 9-10 November 2020, ITS-2114, [1]-10, 2020
[DOI: 10.18154/RWTH-2020-06991] Authors and Contributors
Otte, Thomas (Corresponding author)
Bartels, Holger
Posada Moreno, Andres Felipe
Wittenburg, Georg
Ha�ler, Marc
Source
[Contribution to a conference proceedings]
The future of urban freight transport: A data-driven consolidation approach to accompany cities on their path to zero redundancy in freight movement
In: ITS European Congress : virtual, on 9-10 November 2020, ITS-20357, [1]-10, 2020
[DOI: 10.18154/RWTH-2020-06989] Authors and Contributors
Otte, Thomas (Corresponding author)
Gannouni, Aymen
Meisen, Tobias
Source
[Contribution to a book, Contribution to a conference proceedings]
Additive Manufacturing for Cost Efficient Hybrid Welding Jigs
In: The 10th International Conference on Engineering, Project, and Production Management, 559-571, 2020
[DOI: 10.1007/978-981-15-1910-9_46] Authors and Contributors
Lichtenth�ler, Kolja (Corresponding author)
Bergweiler, Georg
Kampker, Achim
Hollah, Ansgar Magnus (Corresponding author)
Leimbrink, Sebstian
Source
[Journal Article]
Battery pack remanufacturing process up to cell level with sorting and repurposing of battery cells
In: Journal of remanufacturing, Online First, 1-23, 2020
[DOI: 10.1007/s13243-020-00088-6] Authors and Contributors
Kampker, Achim
Wessel, Saskia
Fiedler, Falko
Maltoni, Francesco (Corresponding author)
Source
[Report]
Blockchain AuditCloud - Secure shifting of corporate audits to the cloud: How Blockchain/DLT can automate the certification of companies, 2020 Authors and Contributors
Trauth, Daniel
Bergs, Thomas
Mayer, Johannes
Beckers, Alexander
Stoffers, A.
Source
[Report]
Blockchain AuditCloud - Sichere Verlagerung von Unternehmensaudits in die Cloud: Wie Blockchain/DLT die Zertifizierung von Unternehmen in NRW automatisieren kann, 2020 Authors and Contributors
Trauth, Daniel
Bergs, Thomas
Mayer, Johannes
Beckers, Alexander
Stoffers, A.
Source
[Report]
SPAICER - Statusbericht 01: Kick-Off: Zahlen, Fakten und Hintergr�nde zum KI-Innovationswettbewerb des BMWi aus Sicht des DLR, 2020 Authors and Contributors
Trauth, Daniel
Source
[Report]
SPAICER - Status Report 01: Kick-Off: Facts, figures and background information on the BMWi’s AI innovation competition from the perspective of DLR, 2020 Authors and Contributors
Trauth, Daniel
Source
[Report]
Warum Sie jetzt trotzdem investieren, forschen und entwickeln sollten: Wie Sie Ihre FuE-Kosten anteilig geltend machen und welcher/s Zuschuss/Programm am besten zu Ihnen passt, 2020 Authors and Contributors
Trauth, Daniel
Becker, S.
Source
[Report]
Werkzeug- und Maschinen-Abonnements: Blockchain/DLT-basierte Gesch�ftsmodelle f�r die Produktionstechnik in NRW, 2020 Authors and Contributors
Trauth, Daniel
Beckers, Alexander
Mayer, Johannes
Gr�nebaum, Timm Christian
Bergs, Thomas
Source
[Report]
Tool and Machine Subscriptions: Blockchain/DLT-based business models for production engineering, 2020 Authors and Contributors
Trauth, Daniel
Beckers, Alexander
Mayer, Johannes
Gr�nebaum, Timm Christian
Bergs, Thomas
Source
[Report]
AI-based Framework for Deep Learning Applications in Grinding: Improving manufacturing resilience with virtual sensors, 2020 Authors and Contributors
Trauth, Daniel
Kaufmann, Tobias
Sahay, S.
Niemietz, Philipp
Maa�, W.
et al.
Source
[Contribution to a conference proceedings]
Data-based identification of knowledge transfer needs in global production networks
In: Proceedings of the 1st Conference on Production Systems and Logistics 2020 (CPSL 2020), 17 - 20.03.2020, Stellenbosch, South Africa, 69-77, 2020 Authors and Contributors
Schuh, G�nther
Prote, Jan-Philipp
G�tzlaff, Andreas
Thomas, Katharina (Corresponding author)
Volk, Moritz Johannes
Source
[Book, Report]
Tooling in Slovenia, 2020 Authors and Contributors
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
de Lange, Johan
Boshof, Julian
Ochel, Tim Peter (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Understanding Process Mining for Data-Driven Optimization of Order Processing
In: Procedia manufacturing, 45, 417-422, 2020
[DOI: 10.1016/j.promfg.2020.04.046] Authors and Contributors
Schuh, G�nther
G�tzlaff, Andreas
Cremer, Sven Alexander
Schopen, Marco (Corresponding author)
Source
[Contribution to a book]
Industrie 4.0 : Agile Entwicklung und Produktion im Internet of Production
In: Handbuch Industrie 4.0 : Recht, Technik, Gesellschaft / Walter Frenz, Hrsg., 467-488, 2020
[DOI: 10.1007/978-3-662-58474-3_24] Authors and Contributors
Schuh, G�nther
Riesener, Michael
Prote, Jan-Philipp
D�lle, Christian
Molitor, Marco
et al.
Source
[Journal Article]
Deviation of Starting Solutions Based on Product Architecture Flexibility Evaluation
In: Proceedings of the Design Society / International Conference on Engineering Design, 39 (1), 1077-1086, 2020
[DOI: 10.1017/dsd.2020.20] Authors and Contributors
Riesener, Michael
D�lle, Christian
Schuh, G�nther
Mendl-Heinisch, Michael Otto (Corresponding author)
Source
[Contribution to a conference proceedings]
Development of a decision support app for short term production control to improve the adherence to delivery dates
In: Proceedings of the 1st Conference on Production Systems and Logistics 2020 (CPSL 2020), 17 - 20.03.2020, Stellenbosch, South Africa, 438-447, 2020
[DOI: 10.15488/9686] Authors and Contributors
Steinlein, F. (Corresponding author)
Liu, Yuan
Stich, Volker
Source
[Journal Article]
So gelingt die ganzheitliche digitale Transformation : K�nigsweg zu h�herer Agilit�t
In: Industrie-Anzeiger, 142 (4), 26-27, 2020 Authors and Contributors
Schuh, G�nther
G�tzlaff, Andreas
Cremer, Sven Alexander
Liu, Yuan (Corresponding author)
Source
[Journal Article]
Analysis of the influence of the effective angles on the tool wear in gear hobbing
In: The international journal of advanced manufacturing technology, 108 (7/8), 2621-2632, 2020
[DOI: 10.1007/s00170-020-05499-0] Authors and Contributors
K�hn, Felix (Corresponding author)
L�penhaus, Christoph
Brimmers, Jens
Klocke, Fritz
Bergs, Thomas
Source
[Journal Article]
Mikrogeometrische Schneidengestaltung von W�lzfr�sern aus PM-HSS
In: Branchen-Report Werkzeugmaschinen, 2020, 13-14, 2020 Authors and Contributors
K�hn, Felix (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Development of a numerical simulation method for gear skiving
In: Procedia CIRP, 88, 352-357, 2020
[DOI: 10.1016/j.procir.2020.05.061] Authors and Contributors
Bergs, Thomas
Georgoussis, Adrianos (Corresponding author)
L�penhaus, Christoph
Source
[Contribution to a conference proceedings, Journal Article]
Determination of Johnson-Cook material model parameters for AISI 1045 from orthogonal cutting tests using the Downhill-Simplex algorithm
In: Procedia manufacturing, 48, 541-552, 2020
[DOI: 10.1016/j.promfg.2020.05.081] Authors and Contributors
Bergs, Thomas
Hardt, Marvin Yannick (Corresponding author)
Schraknepper, Daniel
Source
[Journal Article]
Last-Verlagerungsverhalten von Kugelgewindetrieben : Experimentelle Analyse der axialen Steifigkeit von Kugelgewindetrieben
In: wt Werkstattstechnik online, 110 (5), 295-298, 2020
[DOI: 10.37544/1436-4980-2020-05-27] Authors and Contributors
Brecher, Christian
Kneer, Florian (Corresponding author)
Neus, Stephan
Source
[Journal Article]
Dynamische Schmierzustandserkennung �l-Luft-geschmierter Spindellager
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (5), 327-330, 2020
[DOI: 10.3139/104.112293] Authors and Contributors
Brecher, Christian
Christoffers, Daniel (Corresponding author)
Neus, Stephan
Source
[Contribution to a conference proceedings, Journal Article]
Digital image processing with deep learning for automated cutting tool wear detection
In: Procedia manufacturing, 48, 947-958, 2020
[DOI: 10.1016/j.promfg.2020.05.134] Authors and Contributors
Bergs, Thomas
Holst, Carsten (Corresponding author)
Gupta, Pranjul
Augspurger, Thorsten
Source
[Book, Dissertation / PhD Thesis]
Methodennavigator f�r Business-Analytics produzierender Unternehmen
In: Schriftenreihe Rationalisierung 172, 2020 Authors and Contributors
Krechting, Denis
Source
[Book, Dissertation / PhD Thesis]
Pr�ferenzstrukturen von neuen Fahrzeug- und Mobilit�tsangeboten f�r latente Bed�rfnisse privater Nutzer
In: Schriftenreihe Rationalisierung 171, 2020 Authors and Contributors
Feige, Boris Alexander
Source
[Journal Article]
Steigerung der Innovationsproduktivit�t im Internet of Production
In: IT-Matchmaker.guide Industrie 4.0, 2020, 22-25, 2020 Authors and Contributors
Riesener, Michael
D�lle, Christian (Corresponding author)
Menges, Alexander Dominic
Source
[Journal Article]
Super Skiving Cutter: An Innovative Process Modification for Gear Skiving
In: Gear technology, 36 (6), 20 -25, 2020 Authors and Contributors
Monden, Tetsuji (Corresponding author)
Kikuchi, Toshimasa
Yoshikawa, Keisuke
Fujimura, N.
Georgoussis, Adrianos (Corresponding author)
Source
[Report]
Blockchain AuditCloud - Sichere Verlagerung von Unternehmensaudits in die CloudWie Blockchain / DLT die Zertifizierung von Unternehmen in NRW automatisieren kann, 2020 Authors and Contributors
Trauth, Daniel
Bergs, Thomas
Mayer, Johannes
Beckers, Alexander
Stoffers, Alexander
Source
[Conference Presentation]
A novel FEM-CFD interface for multi-physical simulations to model the effects of cutting fluid on the tool temperature during orthogonal cutting
In: Special Interest Group Meeting: Thermal Issues Aachen 2020-02-26 - 2020-02-27, 2020 Authors and Contributors
Liu, Hui
Helmig, Thorsten
Augspurger, Thorsten
Kneer, Reinhold
Bergs, Thomas
Source
[Contribution to a book, Journal Article]
Hybrid model approaches for compensating environmental influences in machine tools using integrated sensors
In: Automatisierungstechnik : AT, 68 (6), 465-476, 2020
[DOI: 10.1515/auto-2020-0007] Authors and Contributors
Dahlem, Jan Philipp (Corresponding author)
Sanders, Mark Pascal
Birck Fr�hlich, Herberth
Schmitt, Robert H.
Source
[Report]
MachineDataMarketplace.NRW - How a data economy can transform the industry in NRW, 2020 Authors and Contributors
Trauth, Daniel
Bergs, Thomas
Mayer, Johannes
Beckers, Alexander
Source
[Journal Article]
Performance measurement of the complaint and failure management process
In: Quality management journal, 27 (1), 2-20, 2020
[DOI: 10.1080/10686967.2019.1689801] Authors and Contributors
Ruessmann, Maximilian (Corresponding author)
Hellebrandt, Thomas Sven
Heine, Ina
Huber, Ulrich
Telpis, Vanya
et al.
Source
[Journal Article]
Biofunctionalized zinc peroxide nanoparticles inhibit peri-implantitis associated anaerobes and Aggregatibacter actinomycetemcomitans pH-dependent
In: Anaerobe, 62, 102153, 2020
[DOI: 10.1016/j.anaerobe.2020.102153] Authors and Contributors
Fr�ber, Katrin
Bergs, Christian Siegfried
Pich, Andrij
Conrads, Georg (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Analysis of the tooth rooth roughness of hobbed gears
In: Procedia CIRP, 88, 346-351, 2020
[DOI: 10.1016/j.procir.2020.05.060] Authors and Contributors
Bergs, Thomas
K�hn, Felix (Corresponding author)
L�penhaus, Christoph
Source
[Contribution to a conference proceedings, Journal Article]
Methodical data-driven integration of customer needs from Social Media into the product development process
In: Procedia CIRP, 88, 127-132, 2020
[DOI: 10.1016/j.procir.2020.05.023] Authors and Contributors
Lindemann, Marie (Corresponding author)
Briele, Kristof Rene
Schmitt, Robert H.
Source
[Book, Dissertation / PhD Thesis]
Blockchain-Applikation f�r das Supply-Chain-Management
In: Schriftenreihe Rationalisierung 170, 2020 Authors and Contributors
Holtkemper, David
Source
[Contribution to a conference proceedings]
Virtual Asset Representation for enabling Adaptive Assembly at the Example of Electric Vehicle Production
In: Proceedings of the 1st Conference on Production Systems and Logistics (CPSL 2020), South Africa, 17. 20. March 2020, 307- 314, 2020
[DOI: 10.15488/9672] Authors and Contributors
Burggr�f, Peter
Burggr�f, Peter
Adlon, Tobias
Hahn, Viviane (Corresponding author)
Riegauf, Aaron
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Artificial intelligence based decision model for a quality oriented production ramp-up
In: Procedia CIRP, 88, 521-526, 2020
[DOI: 10.1016/j.procir.2020.05.090] Authors and Contributors
Ngo, Quoc Hao (Corresponding author)
Schmitt, Sebastian
Ellerich, Max
Schmitt, Robert H.
Source
[Book, Dissertation / PhD Thesis]
Ambidextre Organisationsarchitekturen im industriellen Werkzeugbau
In: Ergebnisse aus der Produktionstechnik 10/2020, 2020 Authors and Contributors
Rittstieg, Felix
Source
[Contribution to a book, Journal Article]
Pulsed Laser Influence on Temperature Distribution during Dual Beam Laser Metal Deposition
In: Metals : open access journal, 10 (6), 766, 2020
[DOI: 10.3390/met10060766] Authors and Contributors
Gipperich, Marius (Corresponding author)
Riepe, Jan
Arntz, Kristian
Bergs, Thomas
Source
[Journal Article]
Direct Polymer Additive Tooling - Economic Analysis of Additive Manufacturing Technologies for Fabrication of Polymer Tools for Injection Molding
In: Key engineering materials, 843, 9-18, 2020
[DOI: 10.4028/www.scientific.net/KEM.843.9] Authors and Contributors
Kampker, Achim
Ayvaz, Peter (Corresponding author)
Lukas, Gerret
Source
[Journal Article]
Optical coherence tomography for non-destructive testing
In: Technisches Messen, 87 (6), 404-413, 2020
[DOI: 10.1515/teme-2019-0098] Authors and Contributors
Zechel, Fabian (Corresponding author)
Kunze, Rouwen
K�nig, Niels
Schmitt, Robert H.
Source
[Journal Article]
Der Digitale Zwilling �ber den Produktlebenszyklus
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (special), 97-100, 2020
[DOI: 10.3139/104.112324] Authors and Contributors
Massonet, Angela
Kiesel, Raphael
Schmitt, Robert H.
Source
[Journal Article]
Survey based dataset on automation decisions for assembly systems in Germany
In: Data in Brief, 31, 105782, 2020
[DOI: 10.1016/j.dib.2020.105782] Authors and Contributors
Burggr�f, Peter
Wagner, Johannes
Dannapfel, Heinrich Matthias (Corresponding author)
Fluchs, Sarah
M�ller, Katharina Maria (Corresponding author)
et al.
Source
[Contribution to a conference proceedings]
Generative Design In Factory Layout Planning: An Application Of Evolutionary Computing Within The Creation Of Production Logistic Concepts
In: Proceedings of the 1st Conference on Production Systems and Logistics (CPSL 2020), South Africa, 17. 20. March 2020, 147-156, 2020
[DOI: 10.15488/9656] Authors and Contributors
Dannapfel, M. (Corresponding author)
Vierschilling, Sebastian Patrick (Corresponding author)
Losse, Stephan
Matzke, Oliver
Source
[Journal Article]
Tribological conditions in grinding of polycrystalline diamond
In: Diamond and related materials, 108, 107930, 2020
[DOI: 10.1016/j.diamond.2020.107930] Authors and Contributors
Bergs, Thomas
M�ller, Ulrich (Corresponding author)
Vits, Frederik
Barth, Sebastian
Source
[Contribution to a book]
Vernetzte Produktion durch Digitale Schatten - Werkzeugmaschine 4.0
In: Handbuch Industrie 4.0 : Recht, Technik, Gesellschaft / Walter Frenz, Hrsg., 543-552, 2020
[DOI: 10.1007/978-3-662-58474-3_27] Authors and Contributors
Brecher, Christian
Brockmann, Matthias (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
Leveraging spatial uncertainty for online error compensation in EMT
In: International journal of computer assisted radiology and surgery, 15 (6), 1043-1051, 2020
[DOI: 10.1007/s11548-020-02189-w] Authors and Contributors
Krumb, Henry (Corresponding author)
Hofmann, Sofie
K�gler, David
Ghazy, Ahmed
Dorweiler, Bernhard
et al.
Source
[Contribution to a book, Journal Article]
A Novel Experimental Test Bench to Investigate the Effects of Cutting Fluids on the Frictional Conditions in Metal Cutting
In: Journal of manufacturing and materials processing, 4 (2), 45, 2020
[DOI: 10.3390/jmmp4020045] Authors and Contributors
Lakner, Thomas (Corresponding author)
Hardt, Marvin Yannick
Source
[Book, Report]
Abschlussbericht zum Forschungsprojekt KoSyF: Kollaborativ Synchronisierte Fertigung, 2020
[DOI: 10.18154/RWTH-2020-05992] Authors and Contributors
Brecher, Christian
Schmitt, Robert H.
Source
[Book]
Predictive Maintenance: Entwicklung vorausschauender Wartungssysteme f�r Werkzeugbaubetriebe und Serienproduzenten, 2020 Authors and Contributors
Schuh, G�nther
Kelzenberg, Christoph Maximilian Bernd
de Lange, Johan
Busch, Max
Stracke, Felix Konstantin
et al.
Source
[Journal Article]
PTI - Antriebskupplungen auf dem Pr�fstand
In: Drehteil + Drehmaschine, 32 (3), 50-53, 2020 Authors and Contributors
Brecher, Christian
Bergs, Christian Siegfried (Corresponding author)
Neus, Stephan
Source
[Contribution to a book, Contribution to a conference proceedings]
Identifikation von Informationen zur Beschreibung der Systemgrenzen eines sicheren, cyber-physischen Automatisierungssystems
In: Entwurf komplexer Automatisierungssysteme : EKA 2020 : Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen : 16. Fachtagung mit Spezial-Workshop, 10 Seiten, 2020 Authors and Contributors
Buchsbaum, Melanie Sarah Katharina (Corresponding author)
Brecher, Christian
Grochowski, Marco
Kowalewski, Stefan
Source
[Contribution to a book, Contribution to a conference proceedings]
Bef�higung der Testautomatisierung f�r ein cyber-physisches Produktionssystem
In: Entwurf komplexer Automatisierungssysteme : EKA 2020 : Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen : 16. Fachtagung mit Spezial-Workshop, 10 Seiten, 2020 Authors and Contributors
Grochowski, Marco
Kowalewski, Stefan
Buchsbaum, Melanie Sarah Katharina (Corresponding author)
Brecher, Christian
Source
[Journal Article]
Employing a U-net convolutional neural network for segmenting impact damages in optical lock-in thermography images of CFRP plates
In: Nondestructive testing and evaluation, 36 (4), 440-458, 2020
[DOI: 10.1080/10589759.2020.1758099] Authors and Contributors
Oliveira, B. C. F. (Corresponding author)
Seibert, A. A.
Borges, V. K.
Albertazzi, A.
Schmitt, Robert H.
Source
[Journal Article]
Comparison of grouping algorithms to increase the sample size for statistical process control
In: SN applied sciences, 2 (5), 935, 2020
[DOI: 10.1007/s42452-020-2728-x] Authors and Contributors
Greipel, Jonathan Simon (Corresponding author)
Nottenk�mper, Gina
Schmitt, Robert H.
Source
[Contribution to a conference proceedings, Journal Article]
Note: Laser-Based Additive Manufacturing of WC-Co with High-Temperature Powder Bed Preheating
In: Steel research international, 91 (5), 2070054, 2020
[DOI: 10.1002/srin.202070054] Authors and Contributors
Fries, Sofia (Corresponding author)
Genilke, Stephan
Wilms, Markus Benjamin
Seimann, Martin Albert
Weisheit, Andreas
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Equivalence analysis of plastic surface materials and comparable sustainable surfaces by a multisensory measurement system
In: Procedia manufacturing, 43, 627-634, 2020
[DOI: 10.1016/j.promfg.2020.02.143] Authors and Contributors
Gussen, Lars Christopher Konrad (Corresponding author)
Ellerich, Max
Schmitt, Robert H.
Source
[Report]
Maschinendatenmarktplatz.NRW - Wie eine Daten�konomie die Industrie in NRW transformieren kann, 2020 Authors and Contributors
Trauth, Daniel
Bergs, Thomas
Mayer, Johannes
Beckers, Alexander
Source
[Journal Article]
Digital Lean Lighthouse Factory - Nachhaltig effiziente Produktion
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 115 (3), 175-177, 2020
[DOI: 10.3139/104.112251] Authors and Contributors
Schuh, G�nther
Kozielski, Stefan Alexander
Weber, Wolfgang
G�tzlaff, Andreas
Sauermann, Frederick Christian (Corresponding author)
et al.
Source
[Book, Dissertation / PhD Thesis]
Transparency-driven vertikal data connection of production systems for resources monitoring in manufacturing
In: Ergebnisse aus der Produktionstechnik 8/2020, 2020 Authors and Contributors
Vollmer, Thomas
Source
[Book, Dissertation / PhD Thesis]
Development of wire- and powder-based laser metal deposition process for locally modified mechanical properties of X37CrMoV5-1 tool steel
In: Ergebnisse aus der Produktionstechnik 7/2020, 2020 Authors and Contributors
Teli, Mahesh Pradip
Source
[Contribution to a book, Journal Article]
A Digital Perspective on Machine Tool Calibration
In: International journal of automation technology : IJAT, 14 (3), 360-368, 2020
[DOI: 10.20965/ijat.2020.p0360] Authors and Contributors
Montavon, Benjamin Leendert (Corresponding author)
Dahlem, Jan Philipp
Peterek, Martin Joachim
Schmitt, Robert H.
Source
[Book, Dissertation / PhD Thesis]
Tribologie beim Schleifen von polykristallinem Diamant
In: Ergebnisse aus der Produktionstechnik 5/2020, 2020 Authors and Contributors
Vits, Frederik
Source
[Journal Article]
Multiagentensysteme in der Agilen Montage: Echtzeitf�hige Ablaufplanung flexibler Operationsabfolgen
In: wt Werkstattstechnik online, 110 (4), 170-176, 2020
[DOI: 10.37544/1436-4980-2020-04-4] Authors and Contributors
Burggr�f, Peter
Dannapfel, Heinrich Matthias
Adlon, Tobias
Kahmann, Hannes (Corresponding author)
Schukat, Esben
et al.
Source
[Journal Article]
Remote-Laserstrahlschwei�en von Lasche-Schlitz-Verbindungen aus Aluminiummehrschichtblech f�r einkosteng�nstiges Batteriepackgeh�use
In: Schweissen und Schneiden, 72 (3), 127-133, 2020 Authors and Contributors
Schuh, G�nther
Bergweiler, Georg
Fiedler, Falko (Corresponding author)
Kr�ger, Lukas
Source
[Journal Article]
FEM as-a-Service : zwischen Tradition und Daten�konomie
In: Digital manufacturing, 13 (2), 33-35, 2020 Authors and Contributors
Stanke, Joachim Patrick Thomas (Corresponding author)
Source
[Journal Article]
Construction of small sets of reference images for feature descriptors fitting and their use in the multiclassification of parts in industry
In: The international journal of advanced manufacturing technology, 108 (1/2), pages105-116, 2020
[DOI: 10.1007/s00170-020-05253-6] Authors and Contributors
Fr�hlich, Herberth Birck (Corresponding author)
Grozmani, Natalia
Wolfschl�ger, Dominik
Goncalves, Armando Albertazzi
Schmitt, Robert H.
Source
[Journal Article]
Influence of long-wave deviations on the quasi-static and dynamic excitation behavior at higher speeds
In: Applied acoustics, 165, 107307, 2020
[DOI: 10.1016/j.apacoust.2020.107307] Authors and Contributors
Ahmad, Mubarik (Corresponding author)
Brimmers, Jens
Brecher, Christian
Source
[Journal Article]
The Influence of Material Roughness, Hardness and Lubricant Additives on Micropitting Behaviour in Rolling-Sliding Contacts
In: Tribology online, 15 (2), 98-104, 2020
[DOI: 10.2474/trol.15.98] Authors and Contributors
Ohno, Takuya (Corresponding author)
Greschert, Ren�
L�penhaus, Christoph
Brecher, Christian
Source
[Journal Article]
Methodik zur numerischen Simulation des thermo-mechanischen Kontakts beim Einkorneingriff
In: Diamond business, 15 (1), 44-51, 2020 Authors and Contributors
Bergs, Thomas
R�ttger, Jannik (Corresponding author)
Prinz, Sebastian
Barth, Sebastian (Corresponding author)
Source
[Journal Article]
Correction to: Development and validation of a new friction model for cutting processes
In: The international journal of advanced manufacturing technology, 107 (11/12), 4371, 2020
[DOI: 10.1007/s00170-020-05335-5] Authors and Contributors
Peng, Bingxiao (Corresponding author)
Bergs, Thomas
Schraknepper, Daniel
Smigielski, Thobias
Klocke, Fritz
Source
[Journal Article]
Electron microscopic characterization of surface zones thermo-chemically modified by electrical discharge machining
In: Journal of materials processing technology, 280, 116596, 2020
[DOI: 10.1016/j.jmatprotec.2020.116596] Authors and Contributors
Ehle, L.
Schneider, Sebastian
Schwedt, Alexander
Richter, Silvia
Klink, Andreas (Corresponding author)
et al.
Source
[Contribution to a conference proceedings, Journal Article]
ECM roughing of profiled grooves in nickel-based alloys for turbomachinery applications
In: Procedia manufacturing, 40, 22-26, 2019
[DOI: 10.1016/j.promfg.2020.02.005] Authors and Contributors
Bergs, Thomas
Rommes, Bob (Corresponding author)
Smeets, Gregor Gabriel
Gmelin, Thomas
Heidemanns, Lukas Franz
et al.
Source
[Journal Article]
Flexibilisierung des Energiebedarfs w�hrend der Warmlauf-phase einer Hauptspindel
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 115 (4), 234-236, 2020
[DOI: 10.3139/104.112258] Authors and Contributors
Brecher, Christian
Strachkov, Anton (Corresponding author)
Steinert, Alexander
Neus, Stephan
Source
[Journal Article]
Strukturkrise bew�ltigen : Strategieentwicklung im Werkzeugbau
In: Form + Werkzeug, 28 (1), 24-25, 2020 Authors and Contributors
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Goertz, David (Corresponding author)
Busch, Max
Source
[Contribution to a conference proceedings, Journal Article]
Investigation of the independence of the best assembly orientations with respect to X-ray source parameters in industrial computed tomography
In: The e-journal of nondestructive testing & ultrasonics, 25 (2), 6 p, 2020 Authors and Contributors
Grozmani, Natalia (Corresponding author)
Chupina, D.
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Entwicklung eines selbstoptimierenden Pr�fsystems zur Erfassung der haptischen Bedienqualit�t
In: Potenziale K�nstlicher Intelligenz f�r die Qualit�tswissenschaft : Bericht zur GQW-Jahrestagung 2018 in N�rnberg / Robert H. Schmitt (Hrsg.), 199-220, 2020
[DOI: 10.1007/978-3-662-60692-6_12] Authors and Contributors
Frank, Daniel Sebastian
Schmitt, Robert H.
Chhor, Jimmy (Corresponding author)
Ellerich, Max (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Blueprint for a Priming Study to Identify Customer Needs in Social Media Reviews
In: Human systems engineering and design II : proceedings of the 2nd International Conference on Human Systems Engineering and Design (IHSED2019): Future Trends and Applications, September 16-18, 2019, Universit�t der Bundeswehr M�nchen, Munich, Germany / Tareq Ahram, Waldemar Karwowski, Stefan Pickl, Redha Taiar, editors, 79-84, 2020
[DOI: 10.1007/978-3-030-27928-8_13] Authors and Contributors
Briele, Kristof Rene (Corresponding author)
Krause, Alexander
Ellerich, Max
Schmitt, Robert H.
Source
[Journal Article]
Condition Monitoring of Ball Screw Drives Based on Frequency Shift
In: IEEE ASME transactions on mechatronics, 25 (3), 1211-1219, 2020
[DOI: 10.1109/TMECH.2020.2969846] Authors and Contributors
Xi, Tiandong (Corresponding author)
Kehne, Sebastian
Fujita, Tomoya
Epple, Alexander
Brecher, Christian
Source
[Book, Dissertation / PhD Thesis]
Gestaltungsmodell zur Steigerung der Regelbarkeit von Produktionsplanungs- und -steuerungssystemen
In: Schriftenreihe Rationalisierung 169, 2020 Authors and Contributors
Wetzchewald, Philipp
Source
[Book, Dissertation / PhD Thesis]
Integration von Lieferanten in agile Entwicklungsprozesse technischer Systeme
In: Ergebnisse aus der Produktionstechnik 6/2020, 2020 Authors and Contributors
Schr�der, Stephan
Source
[Journal Article]
Model-based monitoring of temperatures and heat flows in the milling cutter
In: The international journal of advanced manufacturing technology, 107 (9/10), 4231-4238, 2020
[DOI: 10.1007/s00170-020-05237-6] Authors and Contributors
Augspurger, Thorsten (Corresponding author)
Roson da Silva, Gabriel
Schraknepper, D.
Mattfeld, Patrick-Marcel
Bergs, Thomas
Source
[Book, Dissertation / PhD Thesis]
Laserstrahl-F�gevorbehandlung von CFK-Bauteilen in Formwerkzeugen von Spritzgie�anlagen
In: Ergebnisse aus der Produktionstechnik 9/2020, 2020
[DOI: 10.18154/RWTH-2020-05016] Authors and Contributors
Schares, Richard Ludwig
Source
[Book, Dissertation / PhD Thesis]
Komponenten industrieller, datenbasierter Dienstleistungen
In: Schriftenreihe Rationalisierung 167, 2020 Authors and Contributors
Kolz, Dominik Matthias
Source
[Contribution to a book, Journal Article]
Evaluation of Industry 4.0 Data formats for Digital Twin of Optical Components
In: International journal of precision engineering and manufacturing-green technology : IJPEM-GT, 7 (3), 573-584, 2020
[DOI: 10.1007/s40684-020-00196-5] Authors and Contributors
Schmetz, Arno (Corresponding author)
Lee, Tae Hun
Hoeren, Maximilian
Berger, Marvin
Ehret, Susanne
et al.
Source
[Journal Article]
Improved impact damage characterisation in CFRP samples using the fusion of optical lock-in thermography and optical square-pulse shearography images
In: NDT & E international, 111, 102215, 2020
[DOI: 10.1016/j.ndteint.2020.102215] Authors and Contributors
de Oliveira, Bernardo C. F. (Corresponding author)
Nienheysen, Philipp Thomas
Baldo, Crhistian R.
Gon�alves, Armando Albertazzi
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Investigation of the Influence of Elastic Gear Body Structures on the Operational Behavior of Gears
In: International Conference on Gears 2019, 3rd International Conference on High Performance Plastic Gears 2019, 3rd International Conference on Gear Production 2019 : Garching / Munich, Germany September 18 - 20, 2019 / VDI-Society for Product and Process Design, 785-796, 2020 Authors and Contributors
Scholzen, Philipp Alexander
Billenstein, Daniel
Hammerl, Georg
L�penhaus, Christoph
Glenk, Christian
et al.
Source
[Contribution to a book]
Datenbasiertes Qualit�tsmanagement im Internet of Production
In: Handbuch Industrie 4.0 : Recht, Technik, Gesellschaft / Walter Frenz, Hrsg., 489-516, 2019
[DOI: 10.1007/978-3-662-58474-3_25] Authors and Contributors
Schmitt, Robert H. (Corresponding author)
Ellerich, Max
Schlegel, Peter
Ngo, Quoc Hao
Emonts, Dominik
et al.
Source
[Journal Article]
Methodology for the identification of alternative manufacturing changes for safety-critical components
In: Production engineering, 14, 297-307, 2020
[DOI: 10.1007/s11740-020-00960-1] Authors and Contributors
Bergs, Thomas
Hermann, Lennard (Corresponding author)
Rey, Jan
Barth, Sebastian
Source
[Journal Article]
SABCEMM: A Simulator for Agent-Based Computational Economic Market Models
In: Computational economics, 55 (2), 707-744, 2020
[DOI: 10.1007/s10614-019-09910-1] Authors and Contributors
Trimborn, Torsten (Corresponding author)
Otte, Philipp Joachim
Cramer, Simon Tristan
Beikirch, Maximilian
Pabich, Emma
et al.
Source
[Journal Article]
5G-basierte Sensorik zur �berwachung der Produktion - Erprobung der 5G Mobilfunktechnologie in der Produktion auf dem 5G-Industry Campus Europe
In: Industrie 4.0 Management, 6 (1), 3 S., 2020 Authors and Contributors
Schmitt, Sarah
Jung, Sven
K�nig, Niels
Schmitt, Robert H.
Source
[Journal Article]
FactDAG: Formalizing Data Interoperability in an Internet of Production
In: IEEE internet of things journal, 7 (4), 3243-3253, 2020
[DOI: 10.1109/JIOT.2020.2966402] Authors and Contributors
Gleim, Lars Christoph (Corresponding author)
Pennekamp, Jan
Liebenberg, Martin Roland (Corresponding author)
Buchsbaum, Melanie Sarah Katharina (Corresponding author)
Niemietz, Philipp
et al.
Source
[Journal Article]
Contact pressure, slip-rate, and temperature dependent friction analysis regarding damage free deep drawing of stainless steel
In: Production engineering, 14 (2), 231-238, 2019
[DOI: 10.1007/s11740-019-00940-0] Authors and Contributors
Bergs, Thomas
Trauth, Daniel
Nick, Matthias
Hild, Rafael (Corresponding author)
Source
[Book, Dissertation / PhD Thesis]
Kostenprognose von Instandhaltungsleistungen parallel zur Produktentwicklung
In: Schriftenreihe Rationalisierung Band 166, 2020 Authors and Contributors
Optehostert, Felix
Source
[Contribution to a book, Contribution to a conference proceedings]
Zielgruppenspezifische Gestaltung von Apps im "Internet of Production" am Beispiel der strategischen Produktionsplanung
In: Digitale Arbeit, digitaler Wandel, digitaler Mensch? : 66. Kongress der Gesellschaft f�r Arbeitswissenschaft, TU Berlin, Fachgebiet Mensch-Maschine-Systeme/HU Berlin, Professur Ingenieurpsychologie, 16.-18. M�rz 2020, Berlin / Gesellschaft f�r Arbeitswissenschaft e.V., 2020 Authors and Contributors
Hellig, Tobias
G�tzlaff, Andreas
Thomas, Katharina
Brandl, Christopher
Mertens, Alexander
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Simulation of Thermal Induced Microstructure Evolution within the Heat Affected Zone
In: Procedia CIRP, 82, 432-437, 2019
[DOI: 10.1016/j.procir.2019.04.144] Authors and Contributors
Bergs, Thomas
Mohammadnejad, Mehnoush (Corresponding author)
He�, Dennis Raphael
Harst, Simon Christoph
Klink, Andreas
Source
[Journal Article]
Erweiterung der digitalen Prozesskette um das thermo-elastische Maschinenverhalten: Ein modellbasierter Ansatz
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (1/2), 31-35, 2020
[DOI: 10.3139/104.112209] Authors and Contributors
Brecher, Christian
Spierling, Robert
Wiesch, Marian (Corresponding author)
K�nigs, M.
Fey, Marcel
Source
[Book, Dissertation / PhD Thesis]
�bertragungsverhalten von Planetenrollengewindetrieben unterschiedlicher Gewindegangzahl der Spindel und der Mutter
In: Ergebnisse aus der Produktionstechnik Band 2/2020, 2020 Authors and Contributors
Hildebrand, Maria
Source
[Journal Article]
Vision based pixel-level bridge structural damage detection using a link ASPP network
In: Automation in construction, 110, 102973, 2019
[DOI: 10.1016/j.autcon.2019.102973] Authors and Contributors
Deng, Wenlong
Mou, Yongli
Kashiwa, Takahiro
Escalera, Sergio
Nagai, Kohei
et al.
Source
[Journal Article]
Quantifying disturbance risks on the process time for a robust, synchronized individual production
In: Production engineering, 14 (3), 289-296, 2020
[DOI: 10.1007/s11740-020-00956-x] Authors and Contributors
Heutmann, Timo (Corresponding author)
Tils, Alexander
Schmitt, Robert H.
Source
[Book, Dissertation / PhD Thesis]
Planungsbasierte Generierung von Abl�ufen f�r Maschinensteuerungen
In: Ergebnisse aus der Produktionstechnik 3/2020, 2020 Authors and Contributors
Behnen, Daniel
Source
[Book, Dissertation / PhD Thesis]
Verschlei� der Umformwerkzeuge beim Pr�zionsblankpressen von Quarzglas
In: Ergebnisse aus der Produktionstechnik 1/2020, 2020 Authors and Contributors
Dukwen, Julia
Source
[Journal Article]
Adaptive automation assembly: Identifying system requirements for technical efficiency and worker satisfaction
In: Computers & industrial engineering, 139, 105772, 2019
[DOI: 10.1016/j.cie.2019.03.036] Authors and Contributors
Fletcher, Sarah R. (Corresponding author)
Johnson, Teegan (Corresponding author)
Adlon, Tobias (Corresponding author)
Larreina, Jon (Corresponding author)
Casla, Patricia (Corresponding author)
et al.
Source
[Journal Article]
Jetzt das Unm�gliche wagen : das Ende von Streetscooter ist ein Armutszeugnis f�r Deutschland
In: Aachener Nachrichten, 76 (53, 2020/03/03), 9, 2020 Authors and Contributors
Schuh, G�nther
Source
[Journal Article]
Performance analysis of laser-treated hot forging dies with WC-Co-Cr
In: The international journal of advanced manufacturing technology, 106 (3/4), 1327-1336, 2019
[DOI: 10.1007/s00170-019-04710-1] Authors and Contributors
Gavalas, E. (Corresponding author)
Rossbach, A.
Feuerhack, Andreas
Source
[Journal Article]
Automated driving for car manufacturers’ vehicle logistics
In: Automatisierungstechnik, 68 (3), 222-227, 2020
[DOI: 10.1515/auto-2019-0087] Authors and Contributors
Wenning, Marius Julian (Corresponding author)
Kawollek, Sebastian
Kampker, Achim
Source
[Book, Dissertation / PhD Thesis]
Piezobasierte Werkzeugtechnologie zur replikativen Herstellung abbildender Mikrooptiken aus Kunststoff
In: Ergebnisse aus der Produktionstechnik 51/2019, 2020 Authors and Contributors
Meiers, Bernd
Source
[Book, Dissertation / PhD Thesis]
Bewertung von Prozessoptimierungsmethoden auf dem Shopfloor einer Serienmontage
In: Ergebnisse aus der Produktionstechnik 52/2019, 2020 Authors and Contributors
P�tters, Patrick
Source
[Journal Article]
Development and validation of a new friction model for cutting processes
In: The international journal of advanced manufacturing technology, 107 (11/12), 4357-4369, 2020
[DOI: 10.1007/s00170-019-04709-8] Authors and Contributors
Peng, Bingxiao (Corresponding author)
Bergs, Thomas
Schraknepper, Daniel
Smigielski, Thobias
Klocke, Fritz
Source
[Contribution to a conference proceedings, Journal Article]
Laser-Based Additive Manufacturing of WC-Co with High-Temperature Powder Bed Preheating
In: Steel research international, 91 (3), 1900511, 2020
[DOI: 10.1002/srin.201900511] Authors and Contributors
Fries, Sofia (Corresponding author)
Genilke, Stephan
Wilms, Markus Benjamin
Seimann, Martin Albert
Weisheit, Andreas
et al.
Source
[Contribution to a book, Journal Article]
Modeling of thermo-viscoelastic material behavior of glass over a wide temperature range in glass compression molding
In: Journal of the American Ceramic Society, 103 (4), 2791-2807, 2019
[DOI: 10.1111/jace.16963] Authors and Contributors
Vu, Anh Tuan (Corresponding author)
Vu, Anh Ngoc
Grunwald, Tim
Bergs, Thomas
Source
[Journal Article]
Modelling complex measurement processes for measurement uncertainty determination
In: International journal of quality reliability management, 37 (3), 494-516, 2020
[DOI: 10.1108/IJQRM-07-2019-0232] Authors and Contributors
M�ller, Tobias (Corresponding author)
Huber, Meike (Corresponding author)
Schmitt, Robert H. (Corresponding author)
Source
[Journal Article]
High-strength gears produced by powder metallurgical processes - KL500/93-2
In: Industrial lubrication & tribology, 72 (6), 723-728, 2019
[DOI: 10.1108/ILT-06-2018-0248] Authors and Contributors
Klocke, Fritz
Broeckmann, Christoph
L�penhaus, Christoph
Bezold, Alexander
Frech, Tim
et al.
Source
[Book, Dissertation / PhD Thesis]
Ein systemisches Management-Modell f�r die Fabrikplanung
In: Ergebnisse aus der Produktionstechnik 40/2019, 2020
[DOI: 10.18154/RWTH-2020-00934] Authors and Contributors
Dannapfel, Heinrich Matthias
Source
[Contribution to a conference proceedings, Journal Article]
Self‐Lubricating Physical Vapor Deposition Coatings for Dry Cold Massive Forming
In: Steel research international, 91 (5), 1900475, 2019
[DOI: 10.1002/srin.201900475] Authors and Contributors
Bobzin, Kirsten
Br�gelmann, Tobias
Kruppe, Nathan Christopher
Bergs, Thomas
Trauth, Daniel
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Implementation of an Autonomous Tool Trolley in a Production Line
In: Advances in service and industrial robotics : proceedings of the 28th International Conference on Robotics in Alpe-Adria-Danube Region (RAAD 2019) / Karsten Berns, Daniel G�rges, editors, 117-125, 2020
[DOI: 10.1007/978-3-030-19648-6_14] Authors and Contributors
Engemann, Heiko (Corresponding author)
Badri, Sriram
Wenning, Marius Julian
Kallweit, Stephan
Source
[Contribution to a conference proceedings, Journal Article]
Self-driving chassis for low-invest and highly flexible electric vehicle assembly
In: Procedia manufacturing, 43, 576-582, 2020
[DOI: 10.1016/j.promfg.2020.02.157] Authors and Contributors
Wenning, Marius Julian (Corresponding author)
Kawollek, Sebastian
Kampker, Achim
Source
[Journal Article]
Numerical and experimental determinations of contact heat transfer coefficients in nonisothermal glass molding
In: Journal of the American Ceramic Society, 103 (2), 1258-1269, 2019
[DOI: 10.1111/jace.16756] Authors and Contributors
Vu, Anh Tuan (Corresponding author)
Helmig, Thorsten
Vu, Anh Ngoc
Frekers, Yona Henrik
Grunwald, Tim
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Workpiece Coupling in Machine Tools Using Experimental-Analytical Dynamic Substructuring
In: Dynamic Substructures, Volume 4 : Proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics 2019 / edited by Andreas Linderholt, Matthew S. Allen, Randall L. Mayes, Daniel Rixen, 47-56, 2019
[DOI: 10.1007/978-3-030-12184-6_5] Authors and Contributors
Chavan, Prateek Satish (Corresponding author)
Brecher, Christian
Fey, Marcel
Loba, Matth�us (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Automation Configuration Evaluation in Adaptive Assembly Systems Based on Worker Satisfaction and Costs
In: Advances in Human Factors and Systems Interaction : Proceedings of the AHFE 2019 International Conference on Human Factors and Systems Interaction, July 24-28, 2019, Washington D.C., USA / edited by Isabel L. Nunes, 12-23, 2019
[DOI: 10.1007/978-3-030-20040-4_2] Authors and Contributors
Burggr�f, Peter
Dannapfel, Matthias
Adlon, Tobias (Corresponding author)
Riegauf, Aaron
Schmied, Jessica
Source
[Contribution to a book, Contribution to a conference proceedings]
Enabling Smart Workplaces by Implementing an Adaptive Software Framework
In: Advances in human factors and systems interaction : proceedings of the AHFE 2019 International Conference on Human Factors and Systems Interaction, July 24-28, 2019, Washington D.C., USA / Isabel L. Nunes, editor, 116-127, 2019
[DOI: 10.1007/978-3-030-20040-4_11] Authors and Contributors
Burggr�f, Peter
Kampker, Achim
Kreisk�ther, Kai Denis
Adlon, Tobias
Riegauf, Aaron (Corresponding author)
et al.
Source
[Journal Article]
Support vector regression to correct motor current of machine tool drives
In: Journal of intelligent manufacturing, 31 (3), 553-560, 2019
[DOI: 10.1007/s10845-019-01464-1] Authors and Contributors
Schwenzer, Max (Corresponding author)
Auerbach, Thomas
Miura, Kazumasa
D�bbeler, Benjamin
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings]
Calculation of mixed friction conditions in large-scale rolling-sliding contacts for different surface structures
In: International Conference on Gears 2019 / VDI Wissensforum GmbH, 2019
[DOI: 10.51202/9783181023556-555] Authors and Contributors
Mevissen, Dieter (Corresponding author)
L�penhaus, Christoph
Bergs, Thomas
Brecher, Christian
Source
[Book, Report]
Erfolgreich Fokussieren und Segmentieren im Werkzeugbau, 2019 Authors and Contributors
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd (Corresponding author)
Lange, J.
Goertz, D.
Ebbecke, C.
Source
[Contribution to a book, Contribution to a conference proceedings]
Smart Glasses for State Supervision in Self-optimizing Production Systems
In: Advances in production research : proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / Robert Schmitt, G�nther Schuh, editors, 2019
[DOI: 10.1007/978-3-030-03451-1_17] Authors and Contributors
Lossie, Karl (Corresponding author)
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Analysis of forming technologies for the production of bipolar plates
In: FC� - 1st Fuel Cell Conference Chemnitz 2019 - Saubere Antriebe. Effizient Produziert. : Wissenschaftliche Beitr�ge und Pr�sentationen der ersten Brennstoffzellenkonferenz am 26. und 27. November 2019 in Chemnitz / Herausgeber: Thomas von Unwerth, Welf-Guntram Drossel, 1 Online-Ressource (264 Seiten : Illustrationen, 2019 Authors and Contributors
M�ller, Clemens
Lee, Sangwook
Janssen, Henning
Brecher, Christian
Source
[Book]
Configuration of corporate incubators, 2019
[DOI: 10.24406/IPT-N-555849] Authors and Contributors
Schuh, G�nther
Lau, Felix
Vogt, Florian
Zimmermann, Richard
Source
[News]
Die vernetzte Baustelle : RWTH koordiniert das Forschungsprojekt "Internet of Construction" zur Verbesserung der Termintreue und Qualit�t in der Bauwirtschaft, 2019 Authors and Contributors
Brell-Cokcan, Sigrid (Corresponding author)
Schmitt, Robert H. (Corresponding author)
Source
[Website]
IoC - Internet of Construction : Informationsnetzwerke zur unternehmens�bergreifenden Kollaboration in den Fertigungsketten des Bauwesens, 2019 Authors and Contributors
Brell-Cokcan, Sigrid
Adams, Thomas Julian (Responsible party)
M�nker, S�ren (Responsible party)
Source
[Journal Article]
Gute Vorarbeit tr�gt Fr�chte : Erfolgreiches Lieferantenmanagement
In: Form + Werkzeug, 27 (5), 34-35, 2019 Authors and Contributors
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
de Lange, Johan
Busch, Max (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Analysis of the Dynamic Noise Behavior of PM Gears
In: Euro PM 2019 Congress & Exhibition : Euro PM 2019 proceedings : 13-16 October 2019, Maastricht Exhibition & Congress Centre (MECC), Maastricht, The Netherlands / EPMA, European Powder Metallurgy Association, 2019 Authors and Contributors
Scholzen, Philipp Alexander (Corresponding author)
Brecher, Christian
Brimmers, Jens
Source
[Journal Article]
Gestaltungsmodell zur Steigerung der Wirtschaftlichkeit von Bau-k�sten mechatronischer Produkte
In: Zeitschrift f�r wirtschaftlichen Fabrikbetrieb : ZWF, 114 (6), 367-371, 2019
[DOI: 10.3139/104.112095] Authors and Contributors
Schuh, G�nther
D�lle, Christian
Breunig, Stefan Armin Ernst
Becker, Annika (Corresponding author)
Source
[Report]
Thema: Auslegung von W�lzfr�sprozessen bei variablem Anschnitt - Anschnittstrategien : Schlussbericht zu IGF-Vorhaben Nr. 18517 : Berichtszeitraum: 01.01.2017-31.03.2019, 2019 Authors and Contributors
Brimmers, Jens
Tro�, Nico
Bergs, Thomas
Source
[Contribution to a book, Contribution to a conference proceedings]
Influence of the Grinding Process on the Workpiece Surface and the Workpiece External Zone Properties of Cemented Carbides
In: Euro PM 2019 Congress & Exhibition : Euro PM 2019 proceedings : 13-16 October 2019, Maastricht Exhibition & Congress Centre (MECC), Maastricht, The Netherlands / EPMA, European Powder Metallurgy Association, 2019 Authors and Contributors
Bergs, Thomas
Dehmer, Alexander Moritz (Corresponding author)
Barth, Sebastian
Wirtz, Christian
Source
[Contribution to a book]
PM-Werkzeuge in der Fertigungstechnik: Anwendung und Potentiale
In: Pulvermetallurgie - Schl�sseltechnologie f�r innovative Systeml�sungen : Vortr�ge und Ausstellerbeitr�ge des Hagener Symposiums am 28. und 29. November 2019 in Hagen / Herausgeber: Herbert Danninger, Lorenz Sigl, MArkus Schneider ; veranstaltet vom Ausschuss f�r Pulvermetallurgie, Deutsche Gesellschaft f�r Materialkunde (DGM), Deutsche Keramische Gesellschaft (DKG), Fachverband Pulvermetallurgie (FPM), Verein Deutscher Ingenieure - Gesellschaft Materials Engineering (VDI-GME), Stahlinstitut VDEh, Fachverband Pulvermetallurgie, 171-198, 2019 Authors and Contributors
Bergs, Thomas
Bletek, Thomas
Grunwald, Tim
Lakner, Thomas (Corresponding author)
Seelbach, Tobias Markus
et al.
Source
[Contribution to a conference proceedings]
Inkrementelle Randzonenmodifikation von einsatzgeh�rteten 16MnCr5-Stirnr�dern mittels maschinellem Oberfl�chenh�mmern
In: Tagungsband 60. Tribologie-Fachtagung 2019, 23.-25. September 2019, G�ttingen, 11 Seiten, 2019 Authors and Contributors
Bergs, Thomas
Uhlmann, Lars
Mannens, Robby Norbert (Corresponding author)
Trauth, Daniel
Source
[Contribution to a conference proceedings]
Simulation-Based Process Analysis of Generating Bevel Gear Cutting
In: [The Brazilian Gear Conference ITA-WZL 2019, 2019-07-31 - 2019-08-01, S�o Jos� dos Campos, Brazil], V-1-V23, 2019 Authors and Contributors
Mazak, Julia (Corresponding author)
Tro�, Nico (Corresponding author)
Source
[Journal Article]
Maschinelles Lernen in der Produktion : Anwendungsgebiete und frei verf�gbare Datens�tze
In: Industrie 4.0 Management, 35 (4), 39-42, 2019
[DOI: 10.30844/I40M_19-4_S39-42] Authors and Contributors
Krau�, Jonathan (Corresponding author)
Dori�en, Jonas
Mende, Hendrik
Frye, Maik
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Machine Learning and Artificial Intelligence in Production: Application Areas and Publicly Available Data Sets
In: Production at the leading edge of technology : proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019 / Jens Peter Wulfsberg, Wolfgang Hintze, Bernd-Arno Behrens, Editors, 2019
[DOI: 10.1007/978-3-662-60417-5_49] Authors and Contributors
Krau�, Jonathan (Corresponding author)
Dori�en, Jonas
Mende, Hendrik
Frye, Maik
Schmitt, Robert H.
Source
[Journal Article]
Industrie 4.0. Kommunikationssystem f�r die Produktion der Zukunft
In: Digital manufacturing, 14 (2), 12-13, 2019 Authors and Contributors
Kiesel, Raphael
Massonet, Angela Monika
Zhou, Beiyan
Heutmann, Timo
Schmitt, Robert H.
Source
[Journal Article]
Cybersecurity in der vernetzten Produktion Studie zu IT-Sicherheit in produzierenden Unternehmen
In: Fabriksoftware, 24 (4), 21-24, 2019
[DOI: 10.30844/FS19-4_21-24] Authors and Contributors
Kiesel, Raphael
Dering, Jan
Schmitt, Robert H.
Source
[Contribution to a conference proceedings]
In-Line, Real-Time Laser Process Monitoring Using Low-Coherence Interferometry
In: Lasers in Manufacturing 2019 : Munich ICM, Internationales Congress Center M�nchen, Germany, June 24-27, 2019 : World of Photonics Congress, 2019 Authors and Contributors
Riedel, Christoph A.
Ackermann, Philippe
Kunze, Rouwen E.
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
A methodology to realize energy-related use cases for a cloud-based smart energy management
In: The 4th IEEE International Conference on Smart Cloud/the 3rd International Symposium on Reinforcement Learning : 10-12 December 2019, Tokyo, Japan : proceedings / organized by: IEEE SmartCloud/ISRL 2019 Committee ; sponsored by: IEEE, IEEE Computer Society, IEEE TCSC, IEEE STC Smart Computing, Columbia University, Waseda University, North America Chinese Talents Association, Longxiang High Tech, 19-24, 2019
[DOI: 10.1109/SmartCloud.2019.00013] Authors and Contributors
Engl�nder, Jacques (Corresponding author)
Wenger, Lucas (Corresponding author)
Kledzinski, Yannick (Corresponding author)
Schmid, Thomas (Corresponding author)
Zeller, Violett (Corresponding author)
et al.
Source
[Abstract]
Homogenization of 3D metallic and polymeric microstructures in an ICME context
In: 5th World Congress on ICME Indianapolis, Indiana, 2019 Authors and Contributors
Laschet, Gottfried
Abouridouane, Mustapha
Koch, Simon Christian
Nokhostin, Hamed
Source
[Contribution to a conference proceedings, Journal Article]
Development of a framework for the flexibility assessment of automotive production concepts
In: Procedia CIRP, 81, 34-39, 2019 Authors and Contributors
Kampker, Achim
Bergweiler, Georg
Hollah, Ansgar Magnus
Bickendorf, Philipp (Corresponding author)
Hoffmann, Felix
Source
[Contribution to a conference proceedings, Journal Article]
Development of a framework for the flexibility assessment of automotive production concepts
In: Procedia CIRP, 81, 34-39, 2019
[DOI: 10.1016/j.procir.2019.03.007] Authors and Contributors
Kampker, Achim
Bergweiler, Georg
Hollah, Ansgar Magnus
Bickendorf, Philipp (Corresponding author)
Hoffmann, Felix
Source
[Contribution to a conference proceedings, Journal Article]
Implications of Service-related Business Models on Product Development Processes
In: Procedia CIRP, 80, 756-761, 2019 Authors and Contributors
Riesener, Michael
D�lle, Christian
Ebi, Manuel
Tittel, Jonas
Source
[Contribution to a conference proceedings, Journal Article]
Development of a decision logic for the selection of a flexible robotic system for the automated manufacturing in tooling
In: Procedia CIRP, 81, 435-440, 2019 Authors and Contributors
Wilms, Marcel (Corresponding author)
Bergs, Thomas
Arntz, Kristian
Johannsen, Lars
Strassburg, Simon
Source
[Contribution to a conference proceedings, Journal Article]
Periphery evaluation for interlinked manufacturing systems in industrial tooling
In: Procedia CIRP, 81, 470-475, 2019 Authors and Contributors
Pr�mmer, Marcel (Corresponding author)
Bergs, Thomas
Arntz, Kristian
L�rken, Christian
Source
[Contribution to a conference proceedings, Journal Article]
Hybrid modeling of thermo-elastic behavior of a three-axis machining center using integral deformation sensors
In: Procedia CIRP, 81, 1301-1306, 2019
[DOI: 10.1016/j.procir.2019.04.017] Authors and Contributors
Brecher, Christian
Lee, Tae Hun (Corresponding author)
Tzanetos, Filippos
Zontar, Daniel
Source
[Contribution to a conference proceedings, Journal Article]
Periphery evaluation for interlinked manufacturing systems in industrial tooling
In: Procedia CIRP, 81, 470-475, 2019
[DOI: 10.1016/j.procir.2019.03.120] Authors and Contributors
Pr�mmer, Marcel (Corresponding author)
Bergs, Thomas
Arntz, Kristian
L�rken, Christian
Source
[Contribution to a conference proceedings, Journal Article]
Development of a decision logic for the selection of a flexible robotic system for the automated manufacturing in tooling
In: Procedia CIRP, 81, 435-440, 2019
[DOI: 10.1016/j.procir.2019.03.075] Authors and Contributors
Wilms, Marcel (Corresponding author)
Bergs, Thomas
Arntz, Kristian
Johannsen, Lars
Strassburg, Simon
Source
[Contribution to a book, Contribution to a conference proceedings]
Statistical Certainties of Expert-Supported Quality Forecasts for Groups of Product Characteristics or Process Parameters
In: International Conference on Competitive Manufacturing (COMA2019) : Proceedings : 30 January 2019 - 1 February 2019, Stellenbosch, South Africa / organised by Department of Industrial Engineering, Stellenbosch University ; Editors: Prof Dimiter Dimitrov, Devon Hagedorn-Hansen, Konrad von Leipzig, 483-488, 2019 Authors and Contributors
Kostyszyn, Kevin
Schmitt, Robert H.
Source
[Contribution to a book]
Smart Devices in Production System Maintenance
In: Predictive Maintenance in Dynamic Systems : Advanced Methods, Decision Support Tools and Real-World Applications, 25-51, 2019
[DOI: 10.1007/978-3-030-05645-2_2] Authors and Contributors
Permin, Eike
Lindner, Florian
Kostyszyn, Kevin
Grunert, Dennis (Corresponding author)
Lossie, Karl
et al.
Source
[Journal Article]
Digital assistance during manual FRP manufacturing
In: JEC composites magazine, 127, 41-43, 2019 Authors and Contributors
Kostyszyn, Kevin
Sch�kel, Martin
Grunert, Dennis
Peters, Tido
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Conceptual Approach to Integrated Human-Centered Performance Management on the Shop Floor
In: Advances in human factors, business management and society : proceedings of the AHFE 2018 International Conference on Human Factors, Business Management and Society, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA / Jussi Ilari Kantola, Salman Nazir, Tibor Barath, editor, 309-321, 2018
[DOI: 10.1007/978-3-319-94709-9_30] Authors and Contributors
Hellebrandt, Thomas Sven (Corresponding author)
R��mann, Maximilian
Heine, Ina
Schmitt, Robert H.
Source
[Contribution to a book, Contribution to a conference proceedings]
Development of Production Planning and Control through the Empowerment of Artificial Intelligence
In: 2019 Second International Conference on Artificial Intelligence for Industries : AI4I 2019 : Laguna Hills, CA, USA, 25-27 September 2019 : proceedings / publisher: IEEE, 115-118, 2019
[DOI: 10.1109/AI4I46381.2019.00037] Authors and Contributors
Schuh, G�nther (Corresponding author)
Kelzenberg, Christoph Maximilian Bernd (Corresponding author)
de Lange, Johan (Corresponding author)
Busch, Max (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Qualifizierung und Optimierung von Bauteilpr�fprozessen auf Werkzeugmaschinen: Eignungsnachweis und Reduktion der Messabweichung mittels Modellwissen und integrierter Sensorik
In: 9. VDI-Fachtagung Messunsicherheit 2019: Messunsicherheit praxisgerecht bestimmen,13.- 14. November 2019, Erfurt, 319-336, 2019 Authors and Contributors
Dahlem, Jan Philipp
Emonts, Dominik (Corresponding author)
Peterek, Martin Joachim
Schmitt, Robert H.
Lehmann, Nico
Source
[Contribution to a book, Contribution to a conference proceedings]
Hybrid Welding Jigs with Additive Manufactured Functional Elements
In: 2019 IEEE International Conference on Industrial Engineering and Engineering Management : IEEM2019 : 15-18 Dec, Macau / IEEE ; organizers: IEEE Macau Section, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 484-488, 2019
[DOI: 10.1109/IEEM44572.2019.8978503] Authors and Contributors
Schuh, G�nther
Bergweiler, Georg
Fiedler, Falko
Lichtenth�ler, Kolja (Corresponding author)
Leimbrink, S.
Source
[Contribution to a book, Contribution to a conference proceedings]
Prediction of Workpiece Quality : An Application of Machine Learning in Manufacturing Industry
In: 6th International Conference on Computer Science, Engineering and Information Technology (CSEIT-2019), November 23-24, 2019, Zurich, Switzerland / Natarajan Meghanathan, Dhinaharan Nagamalai (eds.), 2019
[DOI: 10.5121/csit.2019.91316] Authors and Contributors
Schuh, G�nther
Scholz, Paul
Schorr, Sebastian
Harman, Durmus
M�ller, Matthias
et al.
Source
[Contribution to a conference proceedings]
Quantification of value added structure shifts and strategic reorientation by means of diversification analyses
In: [11th Expert Forum on electric vehicle drives and e-mobility, 2019-09-04 - 2019-09-05, Schweinfurt, Germany], 2019 Authors and Contributors
Scholz, Paul
Schuh, G�nther
Kreutzer, Ramon
Source
[Contribution to a book, Contribution to a conference proceedings]
A Review on Flexible Forming of Sheet Metal Parts
In: 2019 IEEE International Conference on Industrial Engineering and Engineering Management : IEEM2019 : 15-18 Dec, Macau / IEEE ; organizers: IEEE Macau Section, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 1221-1225, 2019
[DOI: 10.1109/IEEM44572.2019.8978879] Authors and Contributors
Schuh, Gunther
Bergweiler, Georg
Fiedler, Falko
Bickendorf, Philipp (Corresponding author)
Colag, Can
Source
[Contribution to a book, Contribution to a conference proceedings]
A Two-phased Risk Management Framework Targeting SMEs Project Portfolios
In: [9th International Conference on Simulation and Modeling Methodologies, Technologies and Applications, SIMULTECH 2019, 2019-07-29 - 2019-07-31, Prague, Czech Republic], 406-413, 2019
[DOI: 10.5220/0008119704060413] Authors and Contributors
Ponsard, Christoph
Germeau, Fabian
Ospina, Gustavo
Bitter, Jan
Mende, Hendrik
et al.
Source
[Book]
Interne und externe Kommunikation interdiszipli�rer Forschungsprojekte : ein Erfahrungsbericht
In: MIA Expertisen 7, 2019 Authors and Contributors
Hees, Frank
Bega�, Dieter M.
Fromhold-Eisebith, Martina
Schmitt, Gisela
Burggr�f, Peter
Source
[Book, Report]
Branchen, Produkte & Unternehmen : Urbane Produktion in Aachen
In: MIA Expertisen 5, 2019 Authors and Contributors
Hees, Frank
Bega�, Dieter M.
Fromhold-Eisebith, Martina
Schmitt, Gisela
Burggr�f, Peter
Source
[Book, Report]
Nutzung mischen : Produktion integrieren
In: MIA Expertisen 2, 2019 Authors and Contributors
Hees, Frank
Bega�, Dieter M.
Fromhold-Eisebith, Martina
Schmitt, Gisela
Burggr�f, Peter
Source
[Book, Report]
Akzeptanz urbaner Produktion : Ergebnisse einer Haushaltsbefragung in Aachen
In: MIA Expertisen 4, 2019
[DOI: 10.18154/RWTH-2020-06978] Authors and Contributors
Hees, Frank
Bega�, Dieter M.
Fromhold-Eisebith, Martina
Schmitt, Gisela
Burggr�f, Peter
Source
[Book, Report]
Urbane Produktion erfahren und erleben : die Ergebnisse in zwei Demonstratoren
In: MIA Expertisen 6, 2019 Authors and Contributors
Hees, Frank
Bega�, Dieter M.
Fromhold-Eisebith, Martina
Schmitt, Gisela
Burggr�f, Peter
Source
[Contribution to a book]
MRK und Arbeitssicherheit : Ein Fallbeispiel
In: Projektatlas Kompetenz Montage : kollaborativ und wandlungsf�hig / Herausgeber Dr. Frank Hees, RWTH Aachen University, Lehrstuhl f�r Informationsmanagement im Maschinenbau / ARIZ; Sarah M�ller-Abdelrazeq, RWTH Aachen University, Lehrstuhl f�r Informationsmanagement im Maschinenbau / ARIZ; Tristan Langer, RWTH Aachen University, Lehrstuhl f�r Informationsmanagement im Maschinenbau / ARIZ; Michael Voss, Festo AG / ARIZ; Prof. Dr. Robert H. Schmitt, RWTH Aachen University, Werkzeugmaschinenlabor WZL, Lehrstuhl f�r Fertigungsmesstechnik und Qualit�tsmanagement / freeMoVe; Guido H�ttemann, RWTH Aachen University, Werkzeugmaschinenlabor WZL, Lehrstuhl f�r Fertigungsmesstechnik und Qualit�tsmanagement / freeMoVe [und 25 andere], 170-171, 2019 Authors and Contributors
Gr�bel, Harald
Dieterich, Peter
Herfs, Werner
Storms, Simon
Roggendorf, Simon (Corresponding author)
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Influence of single-filament dimensions on geometrical density as a quality criterion for fused filament fabrication
In: Proceedings of the Special Interest Group Meeting on Advancing Precision in Additive Manufacturing : September 16-18 2019, Nantes, FR / editors: A. Bernard R.K. Leach, D.B Pedersen, J.S. Taylor ; proceedings compilation: C. Nisbet ; euspen ; American Society for Precision Engineering, 115-118, 2019 Authors and Contributors
Schmitt, Robert H.
Geiger, Kilian Leonard (Corresponding author)
Wolfschl�ger, Dominik
Peterek, Martin Joachim
Source
[Contribution to a conference proceedings, Journal Article]
Simulation Framework for Virtual Robot Programming in Reconfigurable Production Systems
In: Procedia CIRP, 86, 98-103, 2019
[DOI: 10.1016/j.procir.2020.01.045] Authors and Contributors
Brecher, Christian
Wein, Stephan (Corresponding author)
Xu, Xiaomei
Storms, Simon
Herfs, Werner
Source
[Contribution to a conference proceedings, Journal Article]
Additively manufactured milling tool with focused cutting fluid supply
In: Procedia CIRP, 81, 464-469, 2019
[DOI: 10.1016/j.procir.2019.03.118] Authors and Contributors
Lakner, Thomas (Corresponding author)
Bergs, Thomas
D�bbeler, Benjamin
Source
[Contribution to a book, Contribution to a conference proceedings]
Data-Driven Adaptive Processes : A Potential Enabler for Flexible and Versatile Automotive Body Shops
In: 2019 IEEE International Conference on Industrial Engineering and Engineering Management : IEEM2019 : 15-18 Dec, Macau / IEEE ; organizers: IEEE Macau Section, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 283-287, 2019
[DOI: 10.1109/IEEM44572.2019.8978606] Authors and Contributors
Schuh, G�nther
Bergweiler, Georg
Fiedler, Falko
Boelsen, Yannick (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Pulsierende KSS-Zufuhr unter erh�hten Dr�cken beim Schlichtdrehen schwer zerspanbarer Werkstoffe
In: 6. Aachener K�hlschmierstoff-Tagung : 23.-24. Oktober 2019 / Thomas Bergs, Daniel Schraknepper (Hrsg.), 261-271, 2019 Authors and Contributors
Bergs, Thomas
Splettst��er, Antonia Maren (Corresponding author)
Schraknepper, Daniel
Source
[Journal Article]
Beitrag zur Reduzierung der Vorrichtungskosten im Karosseriebau
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (7/8), 460-463, 2019
[DOI: 10.3139/104.112126] Authors and Contributors
Bergweiler, Georg (Corresponding author)
Triebs, Johannes Bernd (Corresponding author)
Hansen, J.
Lichtenth�ler, K.
Leimbrink, Sebastian
Source
[Journal Article]
Unternehmensqualifizierung f�r die Digitale Transformation
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114 (11), 776-779, 2019
[DOI: 10.3139/104.112191] Authors and Contributors
Schuh, G�nther
M�hlbradt, Thomas
Prote, Jan-Philipp
G�tzlaff, Andreas
Ays, Julian Leander
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Load path modelling in single-step deep drawing of rotationally symmetric cups
In: Procedia manufacturing, 29, 520-527, 2019
[DOI: 10.1016/j.promfg.2019.02.170] Authors and Contributors
Nick, Matthias (Corresponding author)
Mannens, Robby Norbert
Trauth, Daniel
Bergs, Thomas
Source
[Journal Article]
Produktrouten in frei verketteten Montagesystemen : Ermittlung und Bewertung von Produktrouten mittels Merkmalsklassifizierung
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (9), 517-520, 2019
[DOI: 10.3139/104.112146] Authors and Contributors
Lettmann, Pascal (Corresponding author)
H�ttemann, Guido (Corresponding author)
Schmitt, Robert H.
Source
[Abstract, Contribution to a conference proceedings]
Method for the continuous migration planning of the design of global production networks
In: 26th International EUROMA conference, Operations Adding Value to Society,Helsinki,Finland, 17-19 June 2019. Conference Book of abstracts, 286-286, 2019 Authors and Contributors
Schuh, G�nther
Prote, Jan-Philipp
Dany, Stefan
G�tzlaff, Andreas
Cremer, Sven Alexander
et al.
Source
[Journal Article]
Produktivit�tsbaukasten 4.0: Ganzheitliche Steigerung der Produktivit�t durch die Kombination von Lean und Industrie 4.0 auf Makro- und Mikroebene
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (6), 408-411, 2019
[DOI: 10.3139/104.112110] Authors and Contributors
Schuh, G�nther
Prote, Jan-Philipp
Molitor, Marco
Wlecke, Shari (Corresponding author)
Source
[Contribution to a book, Contribution to a conference proceedings]
Concept for the industrialization of physical products in the highly iterative product development
In: Production at the leading edge of technology : proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019 / Jens Peter Wulfsberg, Wolfgang Hintze, Bernd-Arno Behrens, Editors, 583-592, 2019
[DOI: 10.1007/978-3-662-60417-5_58] Authors and Contributors
Wlecke, Shari (Corresponding author)
Prote, Jan-Philipp
Molitor, Marco
M�ller, Christopher
Schuh, G�nther
Source
[Contribution to a conference proceedings, Journal Article]
Fixed Cost Management as an Enabler for Agile Manufacturing Networks
In: Procedia manufacturing, 39, 625-634, 2019
[DOI: 10.1016/j.promfg.2020.01.435] Authors and Contributors
Schuh, G�nther
Prote, Jan-Philipp
G�tzlaff, Andreas
Ays, Julian Leander (Corresponding author)
Donner, Angelina
Source
[Contribution to a book, Contribution to a conference proceedings]
Integrated Factory Modelling : Using BIM to disrupt the interface between manufacturing and construction in factory planning
In: Building Information Modelling (BIM) in Design, Construction and Operations III / Edited By: P. De Wilde, Free University of Brussels, Belgium; L. Mahdjoubi, University of the West of England, UK; A. Garrig�s Garrigos, University of Alicante, Spain, 143-155, 2019
[DOI: 10.2495/BIM190131] Authors and Contributors
Burggr�f, Peter
Dannapfel, Heinrich Matthias
Schneidermann, Dennis
Ebade Esfahani, Matthias Aref (Corresponding author)
Schwamborn, Nora
Source
[Report]
Manufacturing Resilience : Towards Resilience Management in Production Engineering, 2019 Authors and Contributors
Trauth, Daniel
Bergs, Thomas
Feuerhack, Andreas
G�lpen, Christian
Janzen, Sabine
et al.
Source
[Report]
Meet the Cognitive Manufacturing Lab : Who we are, 2019 Authors and Contributors
Trauth, Daniel
Bergs, Thomas
Feuerhack, Andreas
G�lpen, Christian
Janzen, Sabine
et al.
Source
[Report]
#SPAICER - Meet the Consortium : About Partners, Supporters and Sponsors, 2019 Authors and Contributors
Trauth, Daniel
Bergs, Thomas
Feuerhack, Andreas
G�lpen, Christian
Janzen, Sabine
et al.
Source
[Report]
#SPAICER - The Vision : AI-based Resilience Management in Production Engineering, 2019 Authors and Contributors
Trauth, Daniel
Bergs, Thomas
Feuerhack, Andreas
G�lpen, Christian
Janzen, Sabine
et al.
Source
[Report]
IILA x IOTA - Finite Element Method As A Service : M2M between FE Server and an Industrial Fineblanking Press, 2019 Authors and Contributors
Trauth, Daniel
Anggia, Ashri
Becker, Semjon
Stanke, Joachim Patrick Thomas
Source
[Report]
IILA x IOTA - Bridging the Gap between OT and IT in Production Metrology : Creating a Wireless Smart Device Gateway for Quality Applications using Mahr Measuring Instruments, 2019 Authors and Contributors
Trauth, Daniel
Anggia, Ashri
Becker, Semjon
Kamps, Sascha
Source
[Contribution to a book, Contribution to a conference proceedings]
Circular Economy : Challenges and Potentials for the Manufacturing Industry by Digital Transformation
In: The 2nd Annual International Symposium on Innovation and Entrepreneurship of the IEEE Technology and Engineering Management Society : October 24-26, 2019, Zhejiang University, Hangzhou, China / IEEE TEMS ISIE, 7 Seiten, 2019
[DOI: 10.1109/TEMS-ISIE46312.2019.9074421] Authors and Contributors
Riesener, Michael (Corresponding author)
D�lle, Christian (Corresponding author)
Mattern, Christian Alexander (Corresponding author)
Kre�, Julian Maximilian (Corresponding author)
Source
[Journal Article]
World of Tooling: Slovenia
In: European tool & mould making : ETMM, 21 (9), 16-18, 2019 Authors and Contributors
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Wiese, Jan-Hendrik
Frey, Christoph (Corresponding author)
Source
[Book, Report]
Digitale Transformation im Werkzeugbau, 2019 Authors and Contributors
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Wiese, Jan-Hendrik
Goertz, David
Boshof, Julian
et al.
Source
[Journal Article]
Apps in der Einzel- und Kleinserienfertigung : Durch mobile Anwendungen zur Agilit�t und dem Internet of Production
In: Kunststoffe , 109 (4), 31-35, 2019 Authors and Contributors
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd (Corresponding author)
Wiese, Jan-Hendrik
Schultes, Thilo Konrad
Source
[Journal Article]
Process Mining im Prototypenbau : Datenbasierte Verbesserung der hochiterativen Produktentwicklung
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (11), 707-710, 2019
[DOI: 10.3139/104.112186] Authors and Contributors
Schuh, G�nther
Prote, Jan-Philipp
G�tzlaff, Andreas
Cremer, Sven Alexander
Schmitz, Seth (Corresponding author)
Source
[Journal Article]
Konzeption, Entwicklung und Evaluierung einer App und Simulationsplattform : Entscheidungsunterst�tzung in der kurzfristigen Produktionssteuerung
In: Unternehmen der Zukunft / UdZForschung, 20 (1), 15-17, 2019 Authors and Contributors
Steinlein, Felix (Corresponding author)
Liu, Yuan (Corresponding author)
Source
[Journal Article]
Verbesserung der Liefertermintreue durch Simulation : App-basierte digitale Entscheidungsunterst�tzung in der kurzfristigen Produktionssteuerung
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (12), 819-822, 2019
[DOI: 10.3139/104.112201] Authors and Contributors
Schuh, G�nther
Stich, Volker (Corresponding author)
G�tzlaff, Andreas
Reschke, Jan
Cremer, Sven Alexander
et al.
Source
[Contribution to a book, Contribution to a conference proceedings]
Framework for the Continuous Increase of Product Performance by Analyzing Product Usage Data
In: 2019 IEEE International Conference on Industrial Engineering and Engineering Management : IEEM2019 : 15-18 Dec, Macau / IEEE ; organizers: IEEE Macau Section, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 1084-1088, 2019
[DOI: 10.1109/IEEM44572.2019.8978842] Authors and Contributors
Riesener, Michael
D�lle, Christian
Becker, Annika (Corresponding author)
Schuh, G�nther
Source
[Journal Article]
Paradigmenwechsel im Fabrikplanungsdatenmanagement : Wie BIM Daten verkn�pft, Fabrikplaner verbindet und Potenziale schafft
In: wt Werkstattstechnik online, 109 (4), 260-267, 2019 Authors and Contributors
Burggr�f, Peter
Dannapfel, Heinrich Matthias
Schneidermann, Dennis
Ebade Esfahani, Matthias Aref (Corresponding author)
Source
[Contribution to a conference proceedings, Journal Article]
The Biological Transformation of Industrial Manufacturing-Future Fields of Action in Bioinspired and Bio-based Production Technologies and Organization
In: Procedia manufacturing, 39, 737-744, 2019
[DOI: 10.1016/j.promfg.2020.01.437] Authors and Contributors
Miehe, Robert (Corresponding author)
Full, Johannes
Scholz, Paul
Demmer, Axel
Bauernhansl, Thomas
et al.
Source
[Contribution to a conference proceedings, Journal Article]
Methodology for the Design of Agile Product Development Networks
In: Procedia CIRP, 84, 1029-1034, 2019
[DOI: 10.1016/j.procir.2019.04.172] Authors and Contributors
Riesener, Michael
Rebentisch, Eric
D�lle, Christian
Kuhn, Maximilian (Corresponding author)
Brockmann, S�ren
Source
[Contribution to a conference proceedings, Journal Article]
Innovation Ecosystems for Industrial Sustainability
In: Procedia CIRP, 2019 (80), 27-32, 2019
[DOI: 10.1016/j.procir.2019.01.035] Authors and Contributors
Riesener, Michael
D�lle, Christian (Corresponding author)
Kuhn, Maximilian
Source
[Journal Article]
Cyber Production Management f�r den Mittelstand : Sprung aufs n�chste Industrie 4.0-Level
In: Industrie-Anzeiger, 141 (33/34), 26-27, 2019 Authors and Contributors
Burggr�f, Peter
Ebade Esfahani, Matthias Aref (Corresponding author)
Source
[Book, Report]
Erfolgreich Planen und Steuern im Werkzeugbau, 2019 Authors and Contributors
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Wiese, Jan-Hendrik
Ebbecke, Christoph Wilhelm
Busch, Max
et al.
Source
[Contribution to a book]
Aufgabenorientierte Zuordnung von Arbeitsinhalten zwischen Mensch und Roboter
In: Projektatlas Kompetenz Montage : kollaborativ und wandlungsf�hig / Herausgeber Dr. Frank Hees, RWTH Aachen University, Lehrstuhl f�r Informationsmanagement im Maschinenbau / ARIZ; Sarah M�ller-Abdelrazeq, RWTH Aachen University, Lehrstuhl f�r Informationsmanagement im Maschinenbau / ARIZ; Tristan Langer, RWTH Aachen University, Lehrstuhl f�r Informationsmanagement im Maschinenbau / ARIZ; Michael Voss, Festo AG / ARIZ; Prof. Dr. Robert H. Schmitt, RWTH Aachen University, Werkzeugmaschinenlabor WZL, Lehrstuhl f�r Fertigungsmesstechnik und Qualit�tsmanagement / freeMoVe; Guido H�ttemann, RWTH Aachen University, Werkzeugmaschinenlabor WZL, Lehrstuhl f�r Fertigungsmesstechnik und Qualit�tsmanagement / freeMoVe [und 25 andere], 92-97, 2019 Authors and Contributors
Blankemeyer, Sebastian
Pischke, Dennis
Stuke, Tobias
Ridder, Christoph
Herfs, Werner
et al.
Source
[Contribution to a book]

Faculties and Institutions

Main page RWTH

Intranet

Teaching

Research Environment

Production Metrology and Quality Management

Production Engineering

Manufacturing Technology

Machine Tools

Consulting

Practical Projects

Associates

Further Education and Events

Profile

Press and Media

Career

Contact

Faculties and Institutions

Faculties and Institutes

Institutions

Publications

Refine List

Type

Published

Organizational Unit