[Book, Dissertation / PhD Thesis]
Modellierung der Schleifkraft beim Kegelradschleifen
In: Ergebnisse aus der Produktionstechnik 32/2022, 2022

Solf, Mareike

[Contribution to a conference proceedings, Journal Article]
Concept for the reduction of non-value-adding operations in Laser Powder Bed Fusion (L-PBF)
In: Procedia CIRP, 107, 344-349, 2022

Groneberg, Hajo (Corresponding author)
Horstkotte, Rainer
Prümmer, Marcel
Bergs, Thomas
Döpper, Frank

[Book, Dissertation / PhD Thesis]
Adaptiver laserunterstützter Tapewickelprozess für die Herstellung von Druckbehältern aus endlosfaserverstärkten Thermoplasten
In: Ergebnisse aus der Produktionstechnik 33/2022, 2022

Schäkel, Martin Gunther Christian

[Dissertation / PhD Thesis]
Analyse des Betriebsverhaltens von Kugelgewindetrieben unter statischen axialen Betriebslasten, 2022

Eßer, Bastian

[Contribution to a book, Contribution to a conference proceedings]
Methodology for the Startup Life Cycle-Dependent Design of Cooperation between Corporates and Startups
In: 2022 Portland International Conference on Management of Engineering and Technology (PICMET) : [Proceedings] - IEEE, 2022. - ISBN 978-1-890843-41-0 - doi:10.23919/PICMET53225.2022.9882614, 13 pp., 2022
[DOI: 10.23919/PICMET53225.2022.9882614]

Schuh, Günther
Studerus, Bastian

[Contribution to a conference proceedings, Journal Article]
Concept for the reduction of non-value-adding operations in Laser Powder Bed Fusion (L-PBF)
In: Procedia CIRP, 107, 344-349, 2022
[DOI: 10.1016/j.procir.2022.04.056]

Groneberg, Hajo (Corresponding author)
Horstkotte, Rainer
Prümmer, Marcel
Bergs, Thomas
Döpper, Frank

[Contribution to a conference proceedings]
Digital Twin Validation for the In-Situ Automated Fiber Placement Process of Thermoplastic Composites
In: [SAMPE Conference and Exhibition 2022, SAMPE, 2022-05-23 - 2022-05-26, Charlotte, North Carolina, USA], 558-572, 2022

Schulz, Malena
Baumann, Heiko
Janssen, Henning
Brecher, Christian

[Journal Article]
Cell Cluster Sorting in Automated Differentiation of Patient-specific Induced Pluripotent Stem Cells Towards Blood Cells
In: Frontiers in Bioengineering and Biotechnology, 2022 (10), No. 755983, 12 pp., 2022
[DOI: 10.3389/fbioe.2022.755983]

Ma, Zhiyao
Szymanskide Toledo, Marcelo Augusto
Wanek, Paul
Elsafi Mabrouk, Mohamed H.
Smet, Francis
et al.

[Contribution to a book, Contribution to a conference proceedings]
Manufacturing of Bio-Based Thermoplastic Fiber-Metal-Laminates Using a Novel Consolidation Process
In: International SAMPE Conference and Exhibition (SAMPE 2022) : Charlotte, North Caroline, USA, 23-26 May 2022 / SAMPE, 532-546, 2022

von Helden, Jonathan
Schulte, Jonas
Janssen, Henning
Brecher, Christian

[Journal Article]
Needle to needle robot-assisted manufacture of cell therapy products
In: Bioengineering & translational medicine, 7 (3), e10387, 2022
[DOI: 10.1002/btm2.10387]

Ochs, Jelena
Hanga, Mariana P.
Shaw, Georgina
Duffy, Niamh
Kulik, Michael
et al.

[Journal Article]
Potential and challenges of tool condition monitoring in gear hobbingPotenziale und Herausforderungen der Werkzeugverschleißüberwachung beim Wälzfräsen
In: Forschung im Ingenieurwesen, 2022
[DOI: 10.1007/s10010-022-00593-z]

Hendricks, Steffen (Corresponding author)
Troß, Nico
Brimmers, Jens
Bergs, Thomas

[Journal Article]
Optical coherence tomography and convolutional neural networks can differentiate colorectal liver metastases from liver parenchyma ex vivo
In: Journal of cancer research and clinical oncology, 2022
[DOI: 10.1007/s00432-022-04263-z]

Amygdalos, Iakovos (Corresponding author)
Hachgenei, Enno
Burkl, Luisa
Vargas, David
Goßmann, Paul
et al.

[Journal Article]
Datenbasierte Standortauswahl
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 117 (5), 258-263, 2022
[DOI: 10.1515/zwf-2022-1067]

Schuh, Günther
Gützlaff, Andreas
Adlon, Tobias
Schupp, Steffen
Endrikat, Morten
et al.

[Journal Article]
Knowledge-Based Adaptation of Product and Process Design in Blisk Manufacturing
In: Journal of engineering for gas turbines and power, 144 (1), 011023, 2021
[DOI: 10.1115/1.4052029]

Ganser, Philipp (Corresponding author)
Landwehr, Markus
Schiller, Sven
Vahl, Christopher
Mayer, Sebastian
et al.

[Contribution to a book, Contribution to a conference proceedings]
An Interdisciplinary View on Humane Interfaces for Digital Shadows in the Internet of Production
In: 2022 15th International Conference on Human System Interaction (HSI) : 28-31 July 2022, 8 Seiten, 2022
[DOI: 10.1109/HSI55341.2022.9869467]

Pütz, Sebastian (Corresponding author)
Baier, Ralph Oliver
Brauner, Philipp
Brillowski, Florian Sascha
Dammers, Hannah
et al.

[Contribution to a book, Journal Article]
Compact thermo-mechanical models for the fast simulation of machine tools with nonlinear component behavior
In: Automatisierungstechnik : AT, 70 (8), 692-704, 2022
[DOI: 10.1515/auto-2022-0029]

Vettermann, Julia (Corresponding author)
Steinert, Alexander
Brecher, Christian
Benner, Peter
Saak, Jens

[Journal Article]
Numerical predictions of orthogonal cutting-induced residual stress of super alloy Inconel 718 considering dynamic recrystallization
In: The international journal of advanced manufacturing technology, 17 Seiten, 2022
[DOI: 10.1007/s00170-022-09846-1]

Soufian, Emadedin (Corresponding author)
Darabi, Roya
Abouridouane, Mustapha
Reis, Ana
Bergs, Thomas

[Contribution to a book]
Resilience Drivers in Next Generation Manufacturing
In: Forecasting next generation manufacturing : digital shadows, human-machine collaboration, and data-driven business models / Frank T. Piller, Verena Nitsch, Dirk Lüttgens, Alexander Mertens, Sebastian Pütz, Marc Van Dyck editors, 119-128, 2022
[DOI: 10.1007/978-3-031-07734-0_8]

Schollemann, Alexander (Corresponding author)
Wiesch, Marian
Brecher, Christian
Schuh, Günther

[Contribution to a book]
Organization Routines in Next Generation Manufacturing
In: Forecasting next generation manufacturing : digital shadows, human-machine collaboration, and data-driven business models / Frank T. Piller, Verena Nitsch, Dirk Lüttgens, Alexander Mertens, Sebastian Pütz, Marc Van Dyck editors, 75-94, 2022
[DOI: 10.1007/978-3-031-07734-0_5]

Brauner, Philipp (Corresponding author)
Vervier, Luisa Sophie
Brillowski, Florian Sascha
Dammers, Hannah
Steuer-Dankert, Linda
et al.

[Contribution to a book]
Governance Structures in Next Generation Manufacturing
In: Forecasting next generation manufacturing : digital shadows, human-machine collaboration, and data-driven business models / Frank T. Piller, Verena Nitsch, Dirk Lüttgens, Alexander Mertens, Sebastian Pütz, Marc Van Dyck editors, 55-73, 2022
[DOI: 10.1007/978-3-031-07734-0_4]

Brecher, Christian
Jarke, Matthias
Piller, Frank Thomas
Schuh, Günther
Becker, Annika
et al.

[Contribution to a conference proceedings, Journal Article]
The Line-less Mobile Assembly System Simultaneous Scheduling and Location Problem
In: Procedia CIRP, 106, 203-208, 2022

Buckhorst, Armin Friedrich
do Canto, M. K. B.
Schmitt, Robert H.

[Contribution to a conference proceedings, Journal Article]
A Holonic Control System Approach for Line-less Mobile Assembly System Operations
In: Procedia CIRP, 107, 1449-1454, 2022

Buckhorst, Armin Friedrich (Corresponding author)
do Canto, M. K. B.
Rabelo, R. J.
Schmitt, Robert H.

[Preprint]
Ontology-based task allocation for heterogeneous resources in Line-less Mobile Assembly Systems
In: 7th MHI Colloquium 2022 Karlsruhe 2022-07-20 - 2022-07-21, 2022
[DOI: 10.36227/techrxiv.19773352.v1]

Kluge-Wilkes, Aline Chantal (Corresponding author)
Gunaseelan, Balaji
Schmitt, Robert H.

[Abstract, Contribution to a conference proceedings, Journal Article]
"Jointpromise" : Concept of a Multi-step, Automated Platform for Precision Manufacturing of Joint Implants
In: Tissue engineering / A, 28, 1857, 2022

Krieger, Judith (Corresponding author)
Snowball, Stan
Luyten, Frank P.
Papantoniou, Ioannis
Schmitt, Robert H.

[Contribution to a book, Contribution to a conference proceedings]
Augmenting image datasets for quality control models using CycleGANs
In: Proceedings of the 22nd International Conference of the European Society for Precision Engineering and Nanotechnology : 30th May-3rd June 2022, Geneva, CH : conference proceedings / editors: R.K. Leach, A. Akrofi-Ayesu, C. Nisbet, D. Phillips ; internal review committee: H. Mainand Durand, O. Riemer, E. Savio, 4 Seiten, 2022

Moriz, Alexander (Corresponding author)
Wolfschläger, Dominik
Montavon, Benjamin Leendert
Schmitt, Robert H.

[Contribution to a book, Contribution to a conference proceedings]
Experimental Investigation of Contact Heat Transfer at High Pressures
In: Proceedings of the 9th International Conference on Fluid Flow, Heat and Mass Transfer (FFHMT’22) Niagara Falls, Canada - June 08-10, 2022 / Dr. Boguslaw Kruczek, Conference Chair and Proceedings Editor; Dr. Xianshe Feng, Conference Chair and Proceedings Editor, 140, 1-9, 2022
[DOI: 10.11159/ffhmt22.140]

Göttlich, Tim (Corresponding author)
Helmig, Thorsten
Gerhard, Nicklas
Bergs, Thomas
Kneer, Reinhold

[Contribution to a book, Contribution to a conference proceedings]
Numerical Investigation on Evolving Chip Geometry and Its Impact on Convective Heat Transfer during Orthogonal Cutting Processes
In: Proceedings of the 9th International Conference on Fluid Flow, Heat and Mass Transfer (FFHMT’22) Niagara Falls, Canada - June 08-10, 2022 / Dr. Boguslaw Kruczek, Conference Chair and Proceedings Editor; Dr. Xianshe Feng, Conference Chair and Proceedings Editor, 139, 1-9, 2022
[DOI: 10.11159/ffhmt22.139]

Helmig, Thorsten (Corresponding author)
Göttlich, Tim
Liu, Hui (Corresponding author)
Nguyen, Nhat
Bergs, Thomas
et al.

[Contribution to a conference proceedings, Journal Article]
A Holonic Control System Approach for Line-less Mobile Assembly System Operations
In: Procedia CIRP, 107, 1449-1454, 2022
[DOI: 10.1016/j.procir.2022.05.173]

Buckhorst, Armin Friedrich (Corresponding author)
do Canto, M. K. B.
Rabelo, R. J.
Schmitt, Robert H.

[Contribution to a conference proceedings, Journal Article]
The Line-less Mobile Assembly System Simultaneous Scheduling and Location Problem
In: Procedia CIRP, 106, 203-208, 2022
[DOI: 10.1016/j.procir.2022.02.179]

Buckhorst, Armin Friedrich (Corresponding author)
do Canto, M. K. B.
Schmitt, Robert H.

[Journal Article]
Towards monitoring of a cricket production using instance segmentation
In: Journal of insects as food and feed, 8 (7), 763-772, 2022
[DOI: 10.3920/JIFF2021.0165]

Wenning, Marius Julian (Corresponding author)
Piotrowski, Tobias
Janzen, Jürgen
Nießing, Bastian
Schmitt, Robert H.

[Journal Article]
Toward Rapid, Widely Available Autologous CAR-T Cell Therapy - Artificial Intelligence and Automation Enabling the Smart Manufacturing Hospital
In: Frontiers in medicine, 9, 913287, 2022
[DOI: 10.3389/fmed.2022.913287]

Hort, Simon
Herbst, Laura
Bäckel, Niklas
Erkens, Frederik
Niessing, Bastian
et al.

[Patent]
Greifer zum Greifen von Objekten, 2022

Heibeyn, Jan
König, Niels
Radermacher, Klaus

[Contribution to a conference proceedings, Journal Article]
AI-Based Failure Management : Value Chain Approach in Commercial Vehicle Industry
In: Procedia CIRP, 109, 251-256, 2022

Günther, Robin Yannick Rocky (Corresponding author)
Beckschulte, Sebastian
Wende, Martin
Mende, Hendrik
Schmitt, Robert H.

[Contribution to a book, Contribution to a conference proceedings]
Fine Blanking Limits of Manganese-Boron-Steel in Fine Blanking Compared to Tempered Steel with Variation of Sheet Metal Temperature
In: [ESAFORM 2022 - 25th International Conference in Material Forming, ESAFORM 22, 2022-04-27 - 2022-04-29, Braga, Portugal], 1122-1130, 2022
[DOI: 10.4028/p-7cwhpb]

Weiser, Ingo Felix (Corresponding author)
Herrig, Tim (Corresponding author)
Bergs, Thomas (Corresponding author)

[Journal Article]
Testing the reliability of monocular obstacle detection methods in a simulated 3D factory environment
In: Journal of intelligent manufacturing, 33 (7), 2157-2165, 2022
[DOI: 10.1007/s10845-022-01983-4]

Wenning, Marius Julian (Corresponding author)
Backhaus, Anton Akira
Adlon, Tobias
Burggräf, Peter

[Patent]
Nachweis von Umwelteinflüssen mittels Biolumineszenz, 2022

Borlinghaus, Jan
Gruhlke, Martin C. H.
Reiter, Jana
Slusarenko, Alan
Riesener, Michael

[Contribution to a conference proceedings, Journal Article]
Advanced experimental setup for in-process measurement of thermo-mechanical load and tool wear when drive shaft turning
In: Procedia CIRP, 108, 323-328, 2022
[DOI: 10.1016/j.procir.2022.03.054]

Abouridouane, Mustapha (Corresponding author)
Augspurger, Thorsten
Reinisch, Niklas Manuel
Rajaei, Ali
Fernández, Mauricio
et al.

[Contribution to a book]
Deployment of machine learning and artificial intelligence solutions in the manufacturing environment
In: ICNAP Study Report 2021, 38-49, 2022

Kies, Alexander
Heymann, Henrik
Schmitt, Robert H.

[Contribution to a book]
Extended reality applied for production line industrialization. How to benefit from extended reality in production?
In: ICNAP Study Report 2021, 32-37, 2022

Brochhaus, Maximilian
Brandstätter, Tobias Claus
Grunert, Dennis
Schmitt, Robert H.

[Contribution to a book]
Data-driven business models. Monetizing industrial data
In: ICNAP Study Report 2021. International Center for Networked, Adaptive Production, 8-19, 2022

Studerus, Bastian
Patzwald, Marc
Cassel, Leonard
Schauss, Marc
Schuh, Günther

[Book]
ICNAP Study Report 2021 / International Center for Networked, Adaptive Production, 2022

Lossie, Karl
Pothen, Mario
Patzwald, Marj
Studerus, Bastian
Cassel, Leonard
et al.

[Contribution to a book, Contribution to a conference proceedings]
Importance of a 5G Network for Construction Sites : Limitation of WLAN in 3D Sensing Applications
In: Proceedings of the 39th International Symposium on Automation and Robotics in Construction / International Association for Automation and Robotics in Construction ; editors in chief: Linner, Tomas; García de Soto, Borja; Hu, Rongbo; Brilakis, Ioannis, 391-398, 2022
[DOI: 10.22260/ISARC2022/0054]

Lee, Hyung Joo
Krishnan, Ajith
Brell-Cokcan, Sigrid
Knußmann, Janina
Brochhaus, Maximilian
et al.

[Journal Article]
Modeling nonequilibrium thermoviscoelastic material behaviors of glass in nonisothermal glass molding
In: Journal of the American Ceramic Society, 105 (11), 6799-6815, 2022
[DOI: 10.1111/jace.18605]

Vu, Anh Tuan (Corresponding author)
Avila Hernandez, Rocio de los Angeles
Grunwald, Tim
Bergs, Thomas

[Journal Article]
Sinogram interpretability based CT artefact reduction for multi-material workpieces
In: Nondestructive testing and evaluation : NDT & E, 1-13, 2022
[DOI: 10.1080/10589759.2022.2091134]

Grozmani, Natalia (Corresponding author)
Chupina, Daria
Montavon, Benjamin Leendert
Schmitt, Robert H.

[Contribution to a conference proceedings, Journal Article]
Structure protects function - An enabler for the functionalization of component surfaces by biohybrid coatings
In: Procedia CIRP, 110, 133-138, 2022
[DOI: 10.1016/j.procir.2022.06.025]

Bergs, Thomas
Schwaneberg, Ulrich
Apelt, Sebastian (Corresponding author)
Jakob, Felix
Rodriguez-Emmenegger, Cesar
et al.

[Contribution to a conference proceedings, Journal Article]
Implementation of an Automated Manufacturing Platform for Engineering of Functional Osteochondral Implants
In: Procedia CIRP, 110, 32-35, 2022
[DOI: 10.1016/j.procir.2022.06.008]

Krieger, Judith
Nießing, Bastian
König, Niels
Mota, Carlos
La Pointe, Vanessa
et al.

[Book, Dissertation / PhD Thesis]
Kontextbasierte Integration agiler und plangetriebener Entwicklungsprozesse
In: Ergebnisse aus der Produktionstechnik 26/2022, 2022

Ays, Laura Johanna

[Dataset]
Series of Time Series representing Fine-blanking Punch Force Strokes with Wear assessment, 2022
[DOI: 10.7910/DVN/OYNDZO]

Niemietz, Philipp

[Book]
Green Growth : Wie Technologiemanagement einen Beitrag zur Nachhaltigkeitstransformation leisten kann, 2022
[DOI: 10.24406/IPT-N-649049]

Schuh, Günther
Krebs, Leonie
Becker, Helen
Patzwald, Marc

[Journal Article]
Relating wear stages in sheet metal forming based on short- and long-term force signal variations
In: Journal of intelligent manufacturing, 33 (7), 2143-2155, 2022
[DOI: 10.1007/s10845-022-01979-0]

Niemietz, Philipp (Corresponding author)
Kornely, Mia Johanna
Trauth, Daniel
Bergs, Thomas