[Contribution to a book, Contribution to a conference proceedings]
Managing Complex Interactions between Production and Failure Management : a System-theoretical Model
In: 2021 International Conference on Electrical, Computer and Energy Technologies (ICECET), 9-10 Dec. 2021, 5 Seiten, 2022
[DOI: 10.1109/ICECET52533.2021.9698640]

Beckschulte, Sebastian (Corresponding author)
Liang, Junjie
Günther, Robin Yannick Rocky
Schmitt, Robert H.

[Journal Article]
Schadensdiagnose an angetriebenen Werkzeugen mittels MEMS-Sensorik
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 117 (3), 128-132, 2022
[DOI: 10.1515/zwf-2022-1021]

Brecher, Christian
Neus, Stephan
Christoffers, Daniel (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
Data Quality Assessment to Apply Process Mining in Production Processes
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, editors, 515-524, 2021
[DOI: 10.1007/978-3-030-78424-9_57]

Neumann, Henning (Corresponding author)
Müller-Roden, Moritz
Schmitz, Seth
Gützlaff, Andreas
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
Databased Decision Support for the Design of Business Processes in Manufacturing Companies
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, editors, 565-573, 2021
[DOI: 10.1007/978-3-030-78424-9_62]

Schopen, Marco (Corresponding author)
Geesmann, Lars
Schmitz, Seth
Gützlaff, Andreas
Schuh, Günther

[Journal Article]
Model predictive force control in milling based on an ensemble KALMAN filter
In: Journal of intelligent manufacturing, 33 (7), 1907-1919, 2022
[DOI: 10.1007/s10845-022-01931-2]

Schwenzer, Max
Stemmler, Sebastian
Ay, Muzaffer
Rüppel, Adrian K. (Corresponding author)
Bergs, Thomas
et al.

[Book, Dissertation / PhD Thesis]
Modeling the material behavior under metal cutting conditions
In: Ergebnisse aus der Produktionstechnik 7/2022, 2022

Hardt, Marvin Yannick

[Journal Article]
Influence of the Tool Wear on the Quality and Service Life of Gears for the Geared Turbofan Technology Machined by Five-Axis Milling
In: Journal of engineering for gas turbines and power, 144 (6), 061005, 2022
[DOI: 10.1115/1.4053911]

Zachert, Christoph (Corresponding author)
Lakner, Thomas
Greschert, René
Schraknepper, Daniel
Bergs, Thomas

[Journal Article]
Anwendungsfälle der Brennstoffzelle im Nutzfahrzeugsektor
In: Motortechnische Zeitschrift, 83 (2/3), 16-23, 2022
[DOI: 10.1007/s35146-021-0782-6]

Schuh, Günther
Schenk, Leonard
Scholz, Paul

[Book, Dissertation / PhD Thesis]
An empiric quality control framework to enhance conventional manufacturing
In: Ergebnisse aus der Produktionstechnik 11/2022, 2022

Galland, Laura

[Contribution to a book, Journal Article]
Inline Optical Coherence Tomography for Multidirectional Process Monitoring in a Coaxial LMD-w Process
In: Applied Sciences, 12 (5), 2701, 2022
[DOI: 10.3390/app12052701]

Stehmar, Charlotte (Corresponding author)
Gipperich, Marius
Kogel-Hollacher, Markus
Velazquez Iturbide, Alfredo
Schmitt, Robert H.

[Contribution to a book, Contribution to a conference proceedings]
Process stabilization through pulsed laser-induced melt pool shaping in dual-beam LMD
In: Laser 3D Manufacturing IX : 22-27 January 2022, San Francisco, California, United States : 20-24 February 2022, online / Bo Gu, Hongqiang Chen, Henry Helvajian (editors) ; sponsored and published by: SPIE, 10 Seiten, 2022
[DOI: 10.1117/12.2606192]

Gipperich, Marius
Gräfe, Stefan
Day, Robin
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
CAD-based AND/OR Graph Generation Algorithms in (Dis)assembly Sequence Planning of Complex Products
In: Procedia CIRP, 106, 144-149, 2022

Münker, Sören (Corresponding author)
Schmitt, Robert H.

[Book, Dissertation / PhD Thesis]
Beitrag zur Qualitätssicherung beim in-situ Tape-Legen komplexer Laminate
In: Ergebnisse aus der Produktionstechnik 9/2022, 2022
[DOI: 10.18154/RWTH-2022-02788]

Buschhoff, Clemens

[Contribution to a conference proceedings, Journal Article]
CAD-based AND/OR Graph Generation Algorithms in (Dis)assembly Sequence Planning of Complex Products
In: Procedia CIRP, 106, 144-149, 2022
[DOI: 10.1016/j.procir.2022.02.169]

Münker, Sören (Corresponding author)
Schmitt, Robert H.

[Book, Dissertation / PhD Thesis]
Modellierung und Prognose der Qualitätswahrnehmung mittels Machine Learning
In: Ergebnisse aus der Produktionstechnik 12/2022, 2022

Gussen, Lars Christopher Konrad

[Journal Article]
Entscheidungsunterstützung im Produktionsmanagement
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 117 (3), 98-103, 2022
[DOI: 10.1515/zwf-2022-1015]

Müller, Kai Bruno (Corresponding author)
Buschmann, Daniel
Cramer, Simon Tristan
Enslin, Chrismarie
Fischer, Markus
et al.

[Book, Dissertation / PhD Thesis]
Referenzmodell für das Customer-Success-Management im Subskriptionsgeschäft des Maschinen-und Anlagenbaus
In: Schriftenreihe Rationalisierung 181, 2022

Holst, Lennard

[Journal Article]
Virtual indoor-GPS for measurement uncertainty determination in reconfigurable environments
In: Production engineering : research and development, 16 (4), 545-560, 2022
[DOI: 10.1007/s11740-022-01111-4]

Nicksch, Christoph (Corresponding author)
Sabzehi, Mielad
Schmitt, Robert H.

[Contribution to a book, Journal Article]
Asymptotic Posterior Normality of Multivariate Latent Traits in an IRT Model
In: Psychometrika : a journal of quantitative psychology, 87 (3), 1146-1172, 2022
[DOI: 10.1007/s11336-021-09838-2]

Kornely, Mia Johanna
Kateri, Maria (Corresponding author)

[Contribution to a book, Journal Article]
Performance of 5G Trials for Industrial Automation
In: Electronics : open access journal, 11 (3), 412, 2022
[DOI: 10.3390/electronics11030412]

Ansari, Junaid (Corresponding author)
Andersson, Christian
de Bruin, Peter
Farkas, János
Grosjean, Leefke
et al.

[Book, Dissertation / PhD Thesis]
Model predictive control strategy to coordinate production planning and building automation
In: Ergebnisse aus der Produktionstechnik 4/2022, 2022
[DOI: 10.18154/RWTH-2022-02403]

Zhou, Beiyan

[Journal Article]
Effect of Friction Modelling on Damage Prediction in Deep Drawing Simulations of Rotationally Symmetric Cups
In: Defect and diffusion forum : DDF, 414, 103-109, 2022
[DOI: 10.4028/p-29o20d]

Nick, Matthias (Corresponding author)
Müller, Martina (Corresponding author)
Voigts, Herman Otto (Corresponding author)
Weiser, Ingo Felix (Corresponding author)
Herrig, Tim (Corresponding author)
et al.

[Journal Article]
Perspectives on data-driven models and its potentials in metal forming and blanking technologies
In: Production engineering, 16 (5), 607-625, 2022
[DOI: 10.1007/s11740-022-01115-0]

Liewald, Mathias (Corresponding author)
Bergs, Thomas
Groche, Peter
Behrens, Bernd-Arno
Briesenick, David
et al.

[Contribution to a book, Journal Article]
Visualizing Street Pavement Anomalies through Fog Computing V2I Networks and Machine Learning
In: Sensors, 22 (2), 456, 2022
[DOI: 10.3390/s22020456]

Bustamante-Bello, Rogelio (Corresponding author)
García-Barba, Alec
Arce-Saenz, Luis A.
Curiel Ramirez, Luis Alberto
Izquierdo-Reyes, Javier
et al.

[Dataset]
Messdatensätze zur Beurteilung der Leistungsfähigkeit von Lokalisierungsmethoden für Bluetooth Low Energy, 2022
[DOI: 10.18154/RWTH-2022-02244]

Elser, Hannes
Jongebloed, Philip

[Journal Article]
Methodology for the integrative adaption of manufacturing process and inspection sequences to component changes of safety-critical medical products
In: Production engineering, 16 (4), 535-544, 2022
[DOI: 10.1007/s11740-022-01114-1]

Stauder, Lars Niklas (Corresponding author)
Knott, Anna-Lena
Schmitt, Robert H.
Bergs, Thomas

[Journal Article]
Prediction of the critical conditions for dynamic recrystallization in metals
In: International journal of materials research : IJMR, 94 (5), 628-635, 2022
[DOI: 10.1515/ijmr-2003-0109]

Gottstein, Günter (Corresponding author)
Brünger, E.
Frommert, M.
Goerdeler, M.
Zeng, M.
et al.

[Book, Dissertation / PhD Thesis]
Methodik zur potenzial- und risikobasierten Technologiebewertung
In: Ergebnisse aus der Produktionstechnik 8/2022, 2022

Scholz, Patrick

[Book, Dissertation / PhD Thesis]
Definition und Auslegung von datenbasierten Dienstleistungen im Werkzeugbau
In: Ergebnisse aus der Produktionstechnik 1/2022, 2022

Boshof, Julian

[Contribution to a book, Contribution to a conference proceedings]
Investigation of Combined Flat Coining and Fine Blanking of 16MnCr5 to Influence the Die Roll Formation
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, editors, 112-121, 2021
[DOI: 10.1007/978-3-030-78424-9_13]

Schweinshaupt, Frank Oliver (Corresponding author)
Weiser, Ingo Felix
Herrig, Tim
Bergs, Thomas

[Contribution to a book]
Feinschneidbarkeit von Mangan-Bor-Stahl
In: Tagungsband zum 16. Erlanger Workshop Warmblechumformung 2021, 2022

Weiser, Ingo Felix
Herrig, Tim
Bergs, Thomas

[Book, Dissertation / PhD Thesis]
Cost-efficient design of adaptations for manufacturing process sequences of safety-critical components
In: Ergebnisse aus der Produktionstechnik 2/2022, 2022

Hermann, Lennard W.

[Contribution to a book, Contribution to a conference proceedings]
Controlled Synthesis of Fibre-reinforced Plastics Images from Segmentation Maps using Generative Adversarial Neural Networks
In: Proceedings of the 14th International Conference on Agents and Artificial Intelligence : February 3-5, 2022 / editors: Ana Paula Rocha, Luc Steels and Jaap van den Herik, 801-809, 2022
[DOI: 10.5220/0010913700003116]

Schaaf, Nicolas
Zhou, Hans Aoyang
Enslin, Chrismarie
Brillowski, Florian Sascha
Lütticke, Daniel

[Journal Article]
Model-Based, Experimental Thermoelastic Analysis of a Large Scale Turbine Housing
In: Journal of machine engineering, 22 (1), 84-95, 2022
[DOI: 10.36897/jme/146435]

Emonts, Dominik (Corresponding author)
Sanders, Mark Pascal
Montavon, Benjamin Leendert
Schmitt, Robert H.

[Contribution to a book, Journal Article]
Towards a Data Lake for High Pressure Die Casting
In: Metals : open access journal, 12 (2), 349, 2022
[DOI: 10.3390/met12020349]

Rudack, Maximilian Markus (Corresponding author)
Rath, Michael (Corresponding author)
Vroomen, Uwe
Bührig-Polaczek, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Optimisation of a Workpiece Clamping Position with Reinforcement Learning for Complex Milling Applications
In: Machine kearning, optimization, and data science: 7th International Conference, LOD 2021, Grasmere, UK, October 4-8, 2021, Revised Selected Papers / Giuseppe Nicosia, Varun Ojha, Emanuele La Malfa, Gabriele La Malfa, Giorgio Jansen, Panos M. Pardalos, Giovanni Giuffrida, Renato Umeton (eds.). - Part II, 261-276, 2022
[DOI: 10.1007/978-3-030-95470-3_20]

Enslin, Chrismarie
Samsonov, Vladimir (Corresponding author)
Köpken, Hans-Georg
Bär, Schirin
Lütticke, Daniel

[Book, Dissertation / PhD Thesis]
Interdisziplinäre Spezifikation produktionstechnischer Systeme
In: Ergebnisse aus der Produktionstechnik 36/2021, 2022

Flender, Jerome

[Contribution to a book, Contribution to a conference proceedings]
Investigation of the Ball Motion Behavior in Spindle Bearings under Dynamic Loads
In: 23rd International Colloquium Tribology : industrial and automotive lubrication : conference proceedings 2022 / published by Ksenija Topolovec-Miklozic, Andreas Pauschitz, Arshia Fatemi ; TAE - Technische Akademie Esslingen, 385-387, 2022

Eckel, Hans-Martin (Corresponding author)
Brecher, Christian
Neus, Stephan

[Journal Article]
Sheared edge defect segmentation using a convolutional U-Net for quantified quality assessment of fine blanked workpieces
In: Precision engineering, 75, 129-141, 2022
[DOI: 10.1016/j.precisioneng.2022.01.010]

Wolfschläger, Dominik (Corresponding author)
Woltersmann, Jan-Henrik
Montavon, Benjamin Leendert
Schmitt, Robert H.

[Journal Article]
Feature selection for measurement models
In: International journal of quality & reliability management, 2022
[DOI: 10.1108/IJQRM-07-2021-0245]

Müller, Tobias
Segin, Alexander
Weigand, Christoph
Schmitt, Robert H.

[Journal Article]
Understanding Kinematics of the Orthogonal Cutting Using Digital Image Correlation : Measurement and Analysis
In: Journal of manufacturing science and engineering, 144 (3), 031008, 2021
[DOI: 10.1115/1.4051917]

Zhang, Dong (Corresponding author)
Meurer, Markus Joachim (Corresponding author)
Zhang, Xiao-Ming (Corresponding author)
Bergs, Thomas (Corresponding author)
Ding, Han (Corresponding author)

[Conference Presentation]
Hochleistungswerkstoffe aus der Luft- und Raumfahrt : Schleifverhalten von faserverstärkten Nichtoxidkeramiken
In: Schleiftagung 2022 online 2022-01-26 - 2022-01-27, 2022

Prinz, Sebastian

[Book, Dissertation / PhD Thesis]
Smart retrofitting as a structured approach for an organization to implement industry 4.0 using its existing resources
In: Ergebnisse aus der Produktionstechnik 3/2022, 2022
[DOI: 10.18154/RWTH-2022-01548]

Guerreiro, Bruno Vallarelli

[Book, Dissertation / PhD Thesis]
Organisation von Subskription im Maschinen- und Anlagenbau
In: Ergebnisse aus der Produktionstechnik 35/2021, 2022

Liu, Yuan

[Book, Dissertation / PhD Thesis]
Verbesserung von Effizienz und Zuverlässigkeit der Produktentwicklung durch adaptives Anforderungsmanagement
In: Ergebnisse aus der Produktionstechnik 30/2021, 2022
[DOI: 10.18154/RWTH-2022-01261]

Pickshaus, Tobias

[Journal Article]
Decentralized Holonic Control System Model for Line-less Mobile Assembly Systems
In: Robotics and computer-integrated manufacturing, 75, 102301, 2022
[DOI: 10.1016/j.rcim.2021.102301]

Buckhorst, Armin Friedrich (Corresponding author)
Grahn, Lea
Schmitt, Robert H.

[Book]
Special Issue "5G Technology in Smart Manufacturing"
In: Electronics : open access journal, 2021

Schmitt, Robert H. (Editor)
Sachs, Joachim (Editor)

[Contribution to a book, Contribution to a conference proceedings]
Design and Evaluation of a Function-Oriented Tooth Flank Roughness
In: Aachen Forum on Gear Production: Gear Finishing Technology and Quality Inspection 9th - 10th November 2021 / Thomas Bergs, Christian Brecher (eds.), 177-192, 2022

Lang, Martin (Corresponding author)
Bergs, Thomas
Brimmers, Jens

[Contribution to a book, Contribution to a conference proceedings]
Potentials and Challenges of Profile Gear Grinding with Vitrified Bonded cBN
In: Aachen Forum on Gear Production: Gear Finishing Technology and Quality Inspection 9th - 10th November 2021 / Thomas Bergs, Christian Brecher (eds.), 31-47, 2022

Schalley, Babette (Corresponding author)
Bergs, Thomas
Brimmers, Jens
Solf, Mareike

[Journal Article]
Adaptive surface geometry determination in multi-material x-ray computed tomography using fringe projection
In: Measurement science and technology, 33 (4), 044001, 2022
[DOI: 10.1088/1361-6501/ac41dc]

Großeheide, Jonas
Geiger, Kilian Leonard
Schmidt, Ânderson
Bütow, Calvin
Montavon, Benjamin Leendert
et al.