Veröffentlichungen
Treffer 351 - 400 von 9454 Ergebnissen
Blättern
- erste Seite
- vorherige Seite
- 101-150
- 251-300
- 301-350
- Sie sind auf Seite:351-400
- 401-450
- 451-500
- letzte Seite
- nächste Seite
- 601-650
-
QuelleBeteiligte
-
[Beitrag zu einem Tagungsband]
On the Definition of Development Objectives for Air Taxis Derived from a Holistic Stakeholder Analysis
In: Luft- und Raumfahrt - Visionen für eine nachhaltige Zukunft : Deutscher Luft- und Raumfahrtkongress 2021 : 31. August-2. September 2021, in Bremen und Online : Publikationen zum DLRK 2021 / DGLR, 1-12, 2022Schuh, Günther
Spangenberg, Maximilian
Stuerken, Johann -
[Fachzeitschriftenartikel]
Measurement uncertainty of a new machine-integrated, PSD based approach for thermo-elastic error measurement
In: MM Science journal, 2022, 5713-5720, 2022
[DOI: 10.17973/MMSJ.2022_06_2021191]Brecher, Christian
Spierling, Robert (Corresponding author)
Fey, Marcel -
[Buchbeitrag]
An energy efficient production technology for the recycling of thermoplastic tape into a new semi-finished product for further use
In: SAMPE Europe Conference 2021 Baden/Zurich. Innovating Towards Perfection. Baden/Zurich, Switzerland and Online 29-30 September 2021. Volume 2 of 2, 680-687, 2022Schwane, Martin
Schulz, Malena
Janssen, Henning
Brecher, Christian -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Preparation of Papers for IFAC Conferences & Symposia : Adaptive fixture system for reducing machining distortion caused by residual stresses in milling
In: IFAC-PapersOnLine, 55 (2), 264-269, 2022
[DOI: 10.1016/j.ifacol.2022.04.204]Landwehr, Markus
Kalocsay, R. (Corresponding author)
Kolvenbach, Christian
Ganser, Philipp
Bergs, Thomas -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Cost-effective production of glass fibre reinforced towpregs
In: Innovating towards perfection : SAMPE Europe Conference 2021 Baden/Zurich : Baden/Zurich, Switzerland and online, 29-30 September 2021 / SAMPE Europe. - Volume 1, 527-534, 2022von Helden, Jonathan
Baumann, Heiko
Janssen, Henning
Brecher, Christian -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
ProdSim : An Open-source Python Package for Generating High-resolution Synthetic Manufacturing Data on Product, Machine and Shop-Floor Levels
In: Procedia CIRP, 107, 1343-1348, 2022Fuchs, Tom
Enslin, Chrismarie (Corresponding author)
Samsonov, Vladimir
Lütticke, Daniel
Schmitt, Robert H. -
[Fachzeitschriftenartikel]
Application of a multi tuned mass disc dampers system to a portal milling machine
In: MM Science journal, 2022 (2), 5620-5628, 2022
[DOI: 10.17973/MMSJ.2022_06_2022048]Brecher, Christian
Zhao, Guifeng (Corresponding author)
Fey, Marcel -
[Buchbeitrag, Fachzeitschriftenartikel]
5G-Based Multi-Sensor Platform for Monitoring of Workpieces and Machines : Prototype Hardware Design and Firmware
In: Electronics : open access journal, 11 (10), 1619, 2022
[DOI: 10.3390/electronics11101619]Mohanram, Praveen
Passarella, Alice
Zattoni, Elena (Corresponding author)
Padovani, Roberto
König, Niels
et al. -
[Buchbeitrag, Fachzeitschriftenartikel]
Smart Automotive E-Mobility—A Proposal for a New Curricula for Engineering Education
In: Education Sciences, 12 (5), 316, 2022
[DOI: 10.3390/educsci12050316]Curiel Ramirez, Luis Alberto (Corresponding author)
Bautista-Montesano, Rolando
Galluzzi, Renato
Izquierdo-Reyes, Javier
Ramírez-Mendoza, Ricardo A.
et al. -
[Buchbeitrag, Fachzeitschriftenartikel]
Investigations on the Potential of 5G for the Detection of Wear in Industrial Roller-Burnishing Processes
In: Electronics : open access journal, 11 (11), 1678, 2022
[DOI: 10.3390/electronics11111678]Kosel, Maximilian (Corresponding author)
Schippers, Tobias
Abdul, Aziz
Ishii, Kristina
Mainczyk, Jacek
et al. -
[Buchbeitrag, Fachzeitschriftenartikel]
Prototype of 5G Integrated with TSN for Edge-Controlled Mobile Robotics
In: Electronics : open access journal, 11 (11), 1666, 2022
[DOI: 10.3390/electronics11111666]Kehl, Pierre (Corresponding author)
Ansari, Junaid
Jafari, Mohammad Hossein
Becker, Paul
Sachs, Joachim
et al. -
[Buchbeitrag, Fachzeitschriftenartikel]
Empirical Study on 5G NR Cochannel Coexistence
In: Electronics, 11 (11), 13 pp., 2022
[DOI: 10.3390/electronics11111676]Caro, Jordi Biosca
Ansari, Junaid (Corresponding author)
Sachs, Joachim
de Bruin, Peter
Sivri, Sertap
et al. -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Analysis of tool wear in face hobbing plunging manufacturing processes
In: Procedia CIRP, 107, 1174-1179, 2022Alexopoulos, Charalampos (Corresponding author)
Brimmers, Jens
Bergs, Thomas -
[Fachzeitschriftenartikel]
A systematic approach towards mastering complexity through hybrid assembly planning
In: CIRP journal of manufacturing science and technology : CIRP-JMST, 15 (38), 159-171, 2022
[DOI: 10.1016/j.cirpj.2022.04.011]Fölling, Carsten (Corresponding author)
Burggräf, Peter
Wang, Siyuan
Adlon, Tobias -
[Fachzeitschriftenartikel]
Digitale Fabrikplanung als Befähiger zur Erreichung der Klimaziele: Skalierbares Fabrik- und Produktionskonzept für die Serienproduktion von Wasserelektrolyseuren
In: wt Werkstattstechnik online, 112 (04), 210-215, 2022
[DOI: 10.37544/1436-4980-2022-04-10]Burggräf, Peter
Adlon, Tobias
Beyer, Moritz
Xu, Tingni
Lehde genannt Kettler, Nils (Corresponding author)
et al. -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
An extended LuGre model for estimating nonlinear frictions in feed drive systems of machine tools
In: Procedia CIRP, 107, 452-457, 2022
[DOI: 10.1016/j.procir.2022.05.007]Xi, Tiandong (Corresponding author)
Fujita, Tomoya
Kehne, Sebastian
Ikeda, Ryosuke
Fey, Marcel
et al. -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Edge computing-based virtual measuring machine for process-parallel prediction of workpiece quality in metal cutting
In: Procedia CIRP, 107, 363-368, 2022
[DOI: 10.1016/j.procir.2022.04.059]Huang, Ziqi (Corresponding author)
Wiesch, Marian
Fey, Marcel
Brecher, Christian -
[Fachzeitschriftenartikel]
Identification of a Practical Digital Twin for Simulation of Machine Tools
In: International journal of automation technology : IJAT, 16 (3), 261-268, 2022
[DOI: 10.20965/ijat.2022.p0261]Fujita, Tomoya
Xi, Tiandong (Corresponding author)
Ikeda, Ryosuke
Kehne, Sebastian
Fey, Marcel
et al. -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Analysis of the Impact of the Tolerance Chain on the Excitation Behavior in Series Gearboxes
In: Dresdner Maschinenelemente Kolloquium - DMK 2022, 26.-27. April / Technische Universität Dresden ; Herausgeber: Prof. Dr.-Ing. Berthold Schlecht, 293-316, 2022Roth, Laurenz Fabian (Corresponding author)
Brimmers, Jens
Brecher, Christian -
[Fachzeitschriftenartikel]
Optimierte Antriebs- und Sensorauslegung für intelligente Vorschubachssysteme
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 117 (6), 368-373, 2022
[DOI: 10.1515/zwf-2022-1063]Herfs, Werner
Kehne, Sebastian (Corresponding author)
Neus, Stephan -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Analysis of tool wear in face hobbing plunging manufacturing processes
In: Procedia CIRP, 107, 1174-1179, 2022
[DOI: 10.1016/j.procir.2022.05.127]Alexopoulos, Charalampos (Corresponding author)
Brimmers, Jens
Bergs, Thomas -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Digital Vehicle Protocol based on Distributed Ledger Technology in Production
In: Procedia CIRP, 107, 804-809, 2022Beckschulte, Sebastian (Corresponding author)
Huebser, Louis
Kiesel, Raphael
Schmitt, Robert H. -
[Abstract, Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Towards Automated Car-T Cell Manufacturing - Keeping up with Technological Advancement
In: Cytotherapy : official journal of ISCT, the International Society for Cellular Therapy, 24 (5, Supplement), S166-S166, 2022
[DOI: 10.1016/S1465-3249(22)00437-6]Herbst, Laura Marie
Erkens, Frederik
Hort, Simon
Baeckel, Niklas
Niessing, Bastian
et al. -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Digital Vehicle Protocol based on Distributed Ledger Technology in Production
In: Procedia CIRP, 107, 804-809, 2022
[DOI: 10.1016/j.procir.2022.05.066]Beckschulte, Sebastian (Corresponding author)
Huebser, Louis
Kiesel, Raphael
Schmitt, Robert H. -
[Buchbeitrag, Fachzeitschriftenartikel]
Techno-Economic Evaluation of 5G-NSA-NPN for Networked Control Systems
In: Electronics : open access journal, 11 (11), 1736, 2022
[DOI: 10.3390/electronics11111736]Kiesel, Raphael (Corresponding author)
Schmitt, Sarah
König, Niels
Brochhaus, Maximilian
Vollmer, Thomas
et al. -
[Fachzeitschriftenartikel]
Towards digital shadows for production planning and control in injection molding
In: CIRP journal of manufacturing science and technology : CIRP-JMST, 38, 243-251, 2022
[DOI: 10.1016/j.cirpj.2022.05.003]Sapel, Patrick (Corresponding author)
Gannouni, Aymen
Fulterer, Judith
Hopmann, Christian
Schmitz, Mauritius
et al. -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Investigation of residual stresses and workpiece distortion during high-feed milling of slender stainless steel components
In: Procedia CIRP, 108, 495-500, 2022
[DOI: 10.1016/j.procir.2022.03.077]Liu, Hui (Corresponding author)
Schraknepper, Daniel
Bergs, Thomas -
[Fachzeitschriftenartikel]
Investigation of the cutting fluid’s flow and its thermomechanical effect on the cutting zone based on fluid-structure interaction (FSI) simulation
In: The international journal of advanced manufacturing technology, 121 (1/2), 267-281, 2022
[DOI: 10.1007/s00170-022-09266-1]Liu, Hui (Corresponding author)
Meurer, Markus Joachim
Schraknepper, Daniel
Bergs, Thomas -
[Buch, Doktorarbeit]
Bewertung von Produktvarianten mittels Process Data Mining
In: Ergebnisse aus der Produktionstechnik 18/2022, 2022Menges, Alexander Dominic -
[Buchbeitrag, Fachzeitschriftenartikel]
Design for 3D Printed Tools: Mechanical Material Properties for Direct Polymer Additive Tooling
In: Polymers, 14 (9), 1694, 2022
[DOI: 10.3390/polym14091694]Frohn-Sörensen, Peter (Corresponding author)
Geueke, Michael
Engel, Bernd
Löffler, Bernd Wolfgang (Corresponding author)
Bickendorf, Philipp
et al. -
[Buch, Doktorarbeit]
Datenbasierte Beschreibung der Prozessperformance in der Auftragsabwicklung
In: Ergebnisse aus der Produktionstechnik 23/2022, 2022Schmitz, Seth -
[Beitrag zu einem Tagungsband]
Introduction of a Highly Iterative Design Process for Air Taxis
In: Luft- und Raumfahrt - Visionen für eine nachhaltige Zukunft : Deutscher Luft- und Raumfahrtkongress 2021 : 31. August-2. September 2021, in Bremen und Online : Publikationen zum DLRK 2021 / DGLR, 2022Schuh, Günther
Spangenberg, Maximilian
Schreiber, Nick -
[Buch, Doktorarbeit]
Applikation maschinell lernender Systeme in der vernetzten adaptiven Produktion
In: Ergebnisse aus der Produktionstechnik 19/2022, 2022Scholz, Paul -
[Buch, Doktorarbeit]
Standortrollen in Produktionsnetzwerken
In: Ergebnisse aus der Produktionstechnik 10/2022, 2022Fränken, Bastian -
[Buch, Tagungsband]
Aachen Forum on Gear Production: Gear Finishing Technology and Quality Inspection 9th - 10th November 2021, 2022Bergs, Thomas (Editor)
Brecher, Christian (Editor) -
[Buch, Doktorarbeit]
Model-based process prediction for predictive-reactive scheduling in automated stem cell production
In: Ergebnisse aus der Produktionstechnik 15/2022, 2022Ochs, Jelena -
[Buch, Doktorarbeit]
Optimizing hyperparameters for machine learning algorithms in production
In: Ergebnisse aus der Produktionstechnik 31/2022, 2022Krauß, Jonathan -
[Buch, Doktorarbeit]
Werkzeugseitiger Einsatz von NiTi-FGL zur Verbesserung der dynamischen Prozessstabilität bei der Fräsbearbeitung
In: Ergebnisse aus der Produktionstechnik Band 16/2022, 2022Schäfer, Alexander -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Deep learning and rule-based image processing pipeline for automated metal cutting tool wear detection and measurement
In: IFAC-PapersOnLine, 55 (2), 534-539, 2022
[DOI: 10.1016/j.ifacol.2022.04.249]Holst, Carsten (Corresponding author)
Yavuz, Taha Berk
Gupta, Pranjul
Ganser, Philipp
Bergs, Thomas -
[Fachzeitschriftenartikel]
Analysis of the thermo-mechanical load and productivity during force-compliant grinding of pcBN
In: Journal of materials processing technology, 305, 117604, 2022
[DOI: 10.1016/j.jmatprotec.2022.117604]Müller, Ulrich Hermann (Corresponding author)
Prinz, Sebastian
Barth, Sebastian
Bergs, Thomas -
[Fachzeitschriftenartikel]
Development of a Life Cycle Model for Deep Tech Startups
In: Journal of production systems and logistics, 2, 5, 2022
[DOI: 10.15488/11730]Schuh, Günther
Studerus, Bastian
Hämmerle, Carsten -
[Fachzeitschriftenartikel]
Description Approach for the Transfer of Competencies and Resources in Collaborations Between Corporates and Deep Tech Startups
In: Journal of production systems and logistics, 2, 7, 2022
[DOI: 10.15488/11860]Schuh, Günther
Studerus, Bastian
Rohmann, Aaron -
[Fachzeitschriftenartikel]
Defining the Intelligent Manufacturing Enterprise
In: Journal of production systems and logistics, 2, 6, 2022
[DOI: 10.15488/11731]Schuh, Günther
Scheuer, Thomas
Padovano, Riley Colleen -
[Fachzeitschriftenartikel]
Schneller als ein Wimpernschlag : Highspeed-Mikroskopie für Hochdurchsatz-Qualitätskontrolle
In: InVision, 2022 (2), 48-49, 2022Narrog, Florian
Nießing, Bastian
Schmitt, Robert H. -
[Buch, Doktorarbeit]
Bewertungsmetrik leistungsbestimmender Faktoren von Supply-Chains in Industriebetrieben
In: Schriftenreihe Rationalisierung 183, 2022Scholz, Svenja Julia -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Transmitter Positioning of Distributed Large-Scale Metrology Within Line-Less Mobile Assembly Systems
In: Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021 / edited by Thorsten Schüppstuhl, Kirsten Tracht, Annika Raatz, 15-26, 2022
[DOI: 10.1007/978-3-030-74032-0_2]Nicksch, Christoph (Corresponding author)
Hüttner, Alexander K.
Schmitt, Robert H. -
[Fachzeitschriftenartikel]
Adaptive Prüfung in der Variantenproduktion - Durch App-basierte Prüfplanung Aufwände reduzieren
In: Qualität und Zuverlässigkeit, 67 (3), 14-16, 2022Huber, Meike (Corresponding author)
Greipel, Jonathan Simon
Schmitt, Robert H. -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Data fusion of local and global sensors within a Global Reference System in aeroplane assembly
In: Technisches Messen, 89 (10), 658-670, 2022
[DOI: 10.1515/teme-2022-0008]Huber, Meike (Corresponding author)
Nicksch, Christoph
Schmitt, Robert H. -
[Fachzeitschriftenartikel]
Daten sind Gold wert : Warum Datenmanagement für Unternehmen zum Erfolgsfaktor wird
In: Qualität und Zuverlässigkeit : QZ, 67 (5), 22-25, 2022Beckschulte, Sebastian
Schlegel, Peter
Günther, Robin Yannick Rocky
Schmitt, Robert H. -
[Tagungsband]
NFDI4Ing CC-41 Community Meeting 2022: Stand und Ausblick des FDMs in Maschinenbau und Produktionstechnik, 2022
[DOI: 10.5281/zenodo.6346778]Hamann, Tobias
Moser, Mario Niclas
Schmitt, Robert
Richter, Manuela
Mozgova, Iryna
et al.
Blättern
- erste Seite
- vorherige Seite
- 101-150
- 251-300
- 301-350
- Sie sind auf Seite:351-400
- 401-450
- 451-500
- letzte Seite
- nächste Seite
- 601-650