Publications
Showing 301 - 350 of 9583 Results
Turn Page
- First Page
- Previous Page
- 51-100
- 201-250
- 251-300
- Sie sind auf Seite:301-350
- 351-400
- 401-450
- Last Page
- Next Page
- 551-600
-
SourceAuthors and Contributors
-
[Contribution to a conference proceedings, Journal Article]
Simulation based derivation of changed rim zone properties caused by thermal loadings during EDM process
In: Procedia CIRP, 113, 41-46, 2022
[DOI: 10.1016/j.procir.2022.09.117]Heß, Dennis Raphael (Corresponding author)
Grethe, Peter
Heidemanns, Lukas Franz
Herrig, Tim
Klink, Andreas
et al. -
[Contribution to a conference proceedings, Journal Article]
Numerical Investigation of the EDM Induced Temperature Field in a Composite Ceramic
In: Procedia CIRP, 108, 31-36, 2022
[DOI: 10.1016/j.procir.2022.03.011]Heß, Dennis Raphael (Corresponding author)
Olivier, Marcel Christoph
Schneider, Sebastian
Heidemanns, Lukas Franz
Klink, Andreas
et al. -
[Contribution to a conference proceedings, Journal Article]
Investigation of residual stresses and workpiece distortion during high-feed milling of slender stainless steel components
In: Procedia CIRP, 108, 495-500, 2022Liu, Hui
Schraknepper, Daniel
Bergs, Thomas -
[Contribution to a conference proceedings, Journal Article]
Experimental investigation on friction under machining conditions with cutting fluid supply
In: Procedia CIRP, 108, 378-383, 2022Gerhard, Nicklas
Göttlich, Tim
Schraknepper, Daniel
Bergs, Thomas -
[Book, Dissertation / PhD Thesis]
Bewertung und Optimierung der Vollständigkeit von Betriebsdaten im Kontext der Fehlerprädiktion
In: Ergebnisse aus der Produktionstechnik 36/2022, 2022
[DOI: 10.18154/RWTH-2022-10641]Schlegel, Peter -
[Journal Article]
Methodik zur Entwicklung eines Verschleißmodells für galvanisch gebundene cBN-Schleifscheiben
In: wt Werkstattstechnik online, 112 (6), 420-424, 2022
[DOI: 10.37544/1436-4980-2022-6-70]Bredthauer, Marc (Corresponding author)
Mattfeld, Patrick-Marcel
Barth, Sebastian
Bergs, Thomas -
[Contribution to a book, Contribution to a conference proceedings]
Explanations of Performance Differences in Segment Lining for Tunnel Boring Machines
In: Intelligent Data Engineering and Automated Learning - IDEAL 2022 : 23rd International Conference, IDEAL 2022, Manchester, UK, November 24-26, 2022, Proceedings / Hujun Yin, David Camacho, Peter Tino, 122-133, 2022
[DOI: 10.1007/978-3-031-21753-1_13]Zhou, Hans Aoyang (Corresponding author)
Gannouni, Aymen
Bazazo, Tala
Tröndle, Johannes
Abdelrazeq, Anas
et al. -
[Contribution to a conference proceedings, Journal Article]
Numerical prediction of machining induced residual stresses when hard cutting AISI 4140
In: Procedia CIRP, 108, 583-588, 2022Meurer, Markus Joachim (Corresponding author)
Tekkaya, Berk
Schraknepper, Daniel
Bergs, Thomas
Münstermann, Sebastian -
[Journal Article]
Digitalized manufacturing process sequences - foundations and analysis of the economic and ecological potential
In: CIRP journal of manufacturing science and technology, 39, 387-400, 2022
[DOI: 10.1016/j.cirpj.2022.09.001]Beckers, Alexander
Hommen, Tim
Becker, Marco
Kornely, Mia Johanna
Reuter, Eike
et al. -
[Contribution to a conference proceedings, Journal Article]
Numerical prediction of machining induced residual stresses when hard cutting AISI 4140
In: Procedia CIRP, 108, 583-588, 2022
[DOI: 10.1016/j.procir.2022.03.092]Meurer, Markus Joachim (Corresponding author)
Tekkaya, Berk
Schraknepper, Daniel
Bergs, Thomas
Münstermann, Sebastian -
[Contribution to a conference proceedings, Journal Article]
Effects of the Manufacturing Chain on the Surface Integrity when Machining Fir Tree Slots with Alternative Manufacturing Processes
In: Procedia CIRP, 108, 728-733, 2022
[DOI: 10.1016/j.procir.2022.03.112]Küpper, Ugur (Corresponding author)
Seelbach, Tobias Markus
Heidemanns, Lukas Franz
Prinz, Sebastian
Herrig, Tim
et al. -
[Contribution to a book, Contribution to a conference proceedings]
Bio-inspired manufacturing of molded optics and optical systems
In: Polymer Optics and Molded Glass Optics: Design, Fabrication, and Materials 2022 : 22 August 2022, San Diego, California, United States / Alan Symmons, Nelson E. Claytor (editors) ; sponsored and published by: SPIE, 6 Seiten, 2022
[DOI: 10.1117/12.2633562]Grunwald, Tim
Bergs, Thomas -
[Contribution to a book, Contribution to a conference proceedings]
Mold protective coatings for precision glass molding
In: Polymer Optics and Molded Glass Optics: Design, Fabrication, and Materials 2022 : 22 August 2022, San Diego, California, United States / Alan Symmons, Nelson E. Claytor (editors) ; sponsored and published by: SPIE, 4 Seiten, 2022
[DOI: 10.1117/12.2633076]Friedrichs, Marcel (Corresponding author)
Grunwald, Tim
Bergs, Thomas -
[Journal Article]
Flexible Steuerungssoftware für die vollautomatisierte ATMP-Herstellung
In: TechnoPharm : making science work, 12 (5), 242-247, 2022
[DOI: 10.24406/publica-533]Hort, Simon (Corresponding author)
Schmitt, Robert H. -
[Talk (non-conference)]
Digitalisierung der Arbeit - 1. Wohlstandsgewinn oder Jobkiller? 2. Kollaps unseres Sozialsystems oder Startpunkt neuer Sozialmodelle?
In: disputatio academica Aachen 2022-11-15 - 2022-11-15, 2022Schiffer, Carsten (Originator)
Baier, Ralph Oliver (Interviewee)
Goppold, Marvin (Interviewee)
Kiesel, Raphael (Interviewee)
Klütsch, Jennifer (Interviewee)
et al. -
[Contribution to a book, Contribution to a conference proceedings]
Feinschneidbarkeit von pressgehärtetem Mangan-Bor-Stahl - eine Zukunftsperspektive?
In: 17, 2022Weiser, Ingo Felix
Herrig, Tim
Bergs, Thomas -
[Contribution to a conference proceedings, Journal Article]
Evaluation of Material Shortage Effect on Assembly Systems Considering Flexibility Levels
In: Procedia CIRP, 107, 966-971, 2022Melnychuk, Oleksandr
Rachner, Jonas Sebastian
Kaven, Lea
Göppert, Amon Mirko Robin
Schmitt, Robert H.
et al. -
[Contribution to a conference proceedings, Journal Article]
Empirical Studies on the Influence of Tool and Process Parameters on the Machinability in Plunge Milling of Lead-Free CuZn-Alloys
In: Procedia CIRP, 115, 113-118, 2022Brans, Kilian (Corresponding author)
Baier, Stefan
Schraknepper, Daniel
Bergs, Thomas -
[Contribution to a conference proceedings, Journal Article]
Reactive online scheduling of mobile resources for adaptive layout evolution in line-less assembly system
In: Procedia CIRP, 107, 270-275, 2022Kaven, Lea (Corresponding author)
Rachner, Jonas Sebastian
Schmid, Thomas
Göppert, Amon Mirko Robin
Schmitt, Robert H. -
[Contribution to a conference proceedings, Journal Article]
Touch-based Augmented Reality Marking Techniques on Production Parts
In: Procedia CIRP, 107, 517-521, 2022Schmetz, Arno
Bellgardt, Martin
Wehrwein, Vincent
Kuhlen, Torsten
Brecher, Christian -
[Contribution to a conference proceedings, Journal Article]
Investigations on five-axis milling and subsequent five-axis grinding of gears
In: Procedia CIRP, 107, 705-711, 2022Bergs, Thomas
Schneider, Sebastian A. M. (Corresponding author)
Janßen, Christopher Maria
Jahnel, Kirk
Ganser, Philip
et al. -
[Contribution to a book, Contribution to a conference proceedings]
Integrating an XPath-Enhanced OPC UA Data Collection Into Industrial Communication
In: 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) : 6-9 Sept. 2022 / [IEEE Industrial Electronics Society, IEEE], 8 Seiten, 2022
[DOI: 10.1109/ETFA52439.2022.9921562]Theissen-Lipp, Johannes
Kocher, Max
Rath, Michael
Ulrich, Sebastian
Rudack, Maximilian Markus
et al. -
[Contribution to a conference proceedings, Journal Article]
Empirical Studies on the Influence of Tool and Process Parameters on the Machinability in Plunge Milling of Lead-Free CuZn-Alloys
In: Procedia CIRP, 115, 113-118, 2022
[DOI: 10.1016/j.procir.2022.10.059]Brans, Kilian (Corresponding author)
Baier, Stefan
Schraknepper, Daniel
Bergs, Thomas -
[Contribution to a conference proceedings, Journal Article]
Evaluation of the influence of different milling parameters and tool wear on the rim zone of a 5-axis milled large gear
In: Procedia CIRP, 108, 43-48, 2022
[DOI: 10.1016/j.procir.2022.03.013]Zachert, Christoph (Corresponding author)
Greschert, René
Schraknepper, Daniel
Brimmers, Jens
Bergs, Thomas -
[Contribution to a conference proceedings, Journal Article]
Evaluation of the influence of different milling parameters and tool wear on the rim zone of a 5-axis milled large gear
In: Procedia CIRP, 108, 43-48, 2022Zachert, Christoph (Corresponding author)
Greschert, René
Schraknepper, Daniel
Brimmers, Jens
Bergs, Thomas -
[Contribution to a conference proceedings, Journal Article]
Surface Integrity Characterization by Barkhausen Noise Measurement after Milling Processes with End Mills
In: Procedia CIRP, 115, 202-207, 2022
[DOI: 10.1016/j.procir.2022.10.074]Zachert, Christoph (Corresponding author)
Schraknepper, Daniel
Bergs, Thomas -
[Contribution to a conference proceedings, Journal Article]
Surface Integrity Characterization by Barkhausen Noise Measurement after Milling Processes with End Mills
In: Procedia CIRP, 115, 202-207, 2022Zachert, Christoph (Corresponding author)
Schraknepper, Daniel
Bergs, Thomas -
[Journal Article]
Knowledge-based process design optimization in blisk manufacturing
In: Journal of engineering for gas turbines and power, 144 (11), 111011, 2022
[DOI: 10.1115/1.4055496]Landwehr, Markus (Corresponding author)
Ganser, Philipp
Vinogradov, Georg
Bergs, Thomas -
[Contribution to a conference proceedings, Journal Article]
Implementation of an Automated Manufacturing Platform for Engineering of Functional Osteochondral Implants
In: Procedia CIRP, 110, 32-35, 2022Krieger, Judith
Nießing, Bastian
König, Niels
Mota, Carlos
La Pointe, Vanessa
et al. -
[Contribution to a conference proceedings, Journal Article]
Structure protects function - An enabler for the functionalization of component surfaces by biohybrid coatings
In: Procedia CIRP, 110, 133-138, 2022Bergs, Thomas
Schwaneberg, Ulrich
Apelt, Sebastian
Jakob, Felix
Rodriguez-Emmenegger, Cesar
et al. -
[Contribution to a conference proceedings, Journal Article]
Methode zur Verschleißvorhersage für den feststoffgeschmierten Zwei-Scheiben-Kontakt
In: Tribologie und Schmierungstechnik, 69 (4), 24-32, 2022Sklenak, Sebastian
Mevissen, Christian
Brimmers, Jens
Brecher, Christian
Lenz, Bastian
et al. -
[Contribution to a book, Contribution to a conference proceedings]
Methode zur Verschleißvorhersage für den feststoffgeschmierten Zwei-Scheiben-Kontakt
In: Tagungsband zur Tribologie-Fachtagung 2022, 6 Seiten, 2022Sklenak, Sebastian (Corresponding author)
Mevissen, Christian
Brimmers, Jens
Brecher, Christian
Lenz, Bastian
et al. -
[Contribution to a book, Contribution to a conference proceedings]
Anomaly Detection in Control Systems With Interval Dissimilarity
In: 2022 Cybernetics & Informatics (K&I) : [Proceedings], 6 Seiten, 2022
[DOI: 10.1109/KI55792.2022.9925972]Kemmerling, Marco
Combrzynski-Nogala, Maciej
Hasler, Marc
Enslin, Chrismarie
Lutticke, Daniel
et al. -
[Contribution to a conference proceedings, Journal Article]
Surface Integrity of Wire Electrochemical Machined Inconel 718
In: Procedia CIRP, 108, 152-157, 2022Herrig, Tim (Corresponding author)
Heidemanns, Lukas Franz
Ehle, Lisa Christine
Weirich, Thomas E.
Bergs, Thomas -
[Contribution to a book, Contribution to a conference proceedings]
IFIP WG 5.7 International Conference on Advances in Production Management Systems (APMS) - Smart Manufacturing and Logistics Systems - Turning Ideas into Action
In: Advances in Production Management Systems. Smart Manufacturing and Logistics Systems: Turning Ideas into Action : IFIP WG 5.7 International Conference, APMS 2022, Gyeongju, South Korea, September 25-29, 2022, Proceedings, Part I / edited by Duck Young Kim, Gregor von Cieminski, David Romero, 110-117, 2022
[DOI: 10.1007/978-3-031-16407-1_14]Schuh, Günther
Gützlaff, Andreas
Fulterer, Judith
Hermann, Annkristin Sophie Alessandra (Corresponding author) -
[Contribution to a book, Contribution to a conference proceedings]
Case-Study-Based Requirements Analysis of Manufacturing Companies for Auto-ML Solutions
In: Advances in Production Management Systems. Smart Manufacturing and Logistics Systems: Turning Ideas into Action : IFIP WG 5.7 International Conference, APMS 2022, Gyeongju, South Korea, September 25-29, 2022, Proceedings, Part I / edited by Duck Young Kim, Gregor von Cieminski, David Romero, 43-50, 2022
[DOI: 10.1007/978-3-031-16407-1_6]Schuh, Günther
Stroh, Max-Ferdinand
Benning, Justus (Corresponding author) -
[Contribution to a book, Contribution to a conference proceedings]
Breaking Transactional Sales: Towards an Acquisition Cycle in Subscription Business of Manufacturing Companies
In: Advances in Production Management Systems. Smart Manufacturing and Logistics Systems: Turning Ideas into Action : IFIP WG 5.7 International Conference, APMS 2022, Gyeongju, South Korea, September 25-29, 2022, Proceedings, Part II / edited by Duck Young Kim, Gregor von Cieminski, David Romero, 283-293, 2022
[DOI: 10.1007/978-3-031-16411-8_34]Rix, Calvin (Corresponding author)
Schuh, Günther
Stich, Volker
Holst, Lennard -
[Contribution to a book, Contribution to a conference proceedings]
Interactions in the Multi-level Distribution Management of Data-Driven Services for Manufacturing Companies
In: Advances in Production Management Systems. Smart Manufacturing and Logistics Systems: Turning Ideas into Action : IFIP WG 5.7 International Conference, APMS 2022, Gyeongju, South Korea, September 25-29, 2022, Proceedings, Part II / edited by Duck Young Kim, Gregor von Cieminski, David Romero, 270-282, 2022
[DOI: 10.1007/978-3-031-16411-8_33]Faulhaber, Marcel (Corresponding author)
Stich, Volker
Schuh, Günther
Holst, Lennard -
[Contribution to a conference proceedings, Journal Article]
Surface Integrity of Wire Electrochemical Machined Inconel 718
In: Procedia CIRP, 108, 152-157, 2022
[DOI: 10.1016/j.procir.2022.04.069]Herrig, Tim (Corresponding author)
Heidemanns, Lukas Franz
Ehle, Lisa Christine
Weirich, Thomas E.
Bergs, Thomas -
[Contribution to a book, Contribution to a conference proceedings]
Development of Technology Strategies under Volatility and Uncertainty : A concept for the Continuous-Iterative Analysis of the Firm and its Environment
In: Technology management and leadership in digital transformation - looking ahead to post-COVID era : PICMET '22 : Portland International Conference on Management of Engineering and Technology : proceedings / editor: Dundar F. Kocaoglu ; organized by Portland State University, Department of Engineering & Technology Management ; sponsored by IEEE TEMS (Technology and Engineering Management Society), Portland State University Foundation, 19 pp., 2022
[DOI: 10.23919/PICMET53225.2022.9882878]Schuh, Günther
Patzwald, Marc
Studerus, Bastian -
[Contribution to a conference proceedings]
Thermographische Tragbildprüfung in der Großserienfertigung von Achsgetrieben
In: DGZfP IRT-2022 : Thermographie-Kolloquium 2022, 28. -29. Sep 2022, Saarbrücken, Germany, 1-9, 2022Gerdhenrichs, Stefan (Corresponding author)
Buschmann, Daniel
Frey, Johannes
Schmitt, Robert H. -
[Journal Article]
Entwicklung eines Qualität-4.0-Reifegradmodells
In: Qualität und Zuverlässigkeit, 67 (2), 36-39, 2022Brochhaus, Maximilian
Schmitt, Robert H.
Fleischer, Karten
Koch, Julian
Trampler, Michael -
[Journal Article]
Simulation of the Refractive Index Variation and Validation of the Form Deviation in Precisely Molded Chalcogenide Glass Lenses (IRG 26) Considering the Stress and Structure Relaxation
In: Materials, 15 (19), 6756, 2022
[DOI: 10.3390/ma15196756]Jiang, Cheng (Corresponding author)
Tovar, Carlos Marin
Staasmeyer, Jan-Helge
Friedrichs, Marcel
Grunwald, Tim
et al. -
[Book, Dissertation / PhD Thesis]
Intelligente Produktionsplanungsprozesse im Werkzeugbau
In: Ergebnisse aus der Produktionstechnik 28/2022, 2022Busch, Max -
[Book, Dissertation / PhD Thesis]
Strategien zur Steigerung der Flächeneffizienz von Fabriken im urbanen Umfeld
In: Ergebnisse aus der Produktionstechnik 29/2022, 2022Henkel, Jérôme -
[Contribution to a conference proceedings, Journal Article]
Comparison of Feature Extraction Algorithms for Prediction of Quality Characteristics
In: Procedia CIRP, 112, 579-584, 2022Cramer, Simon Tristan
Buschmann, Daniel
Schmitt, Robert H. -
[Contribution to a book, Contribution to a conference proceedings]
Determination and Evaluation of the Maximum Surface Densification of Cold Rolled Powder Metal Gears
In: [WorldPM 2022 Congress & Exhibition : Proceedings. - Developing the powder metallurgy future. 9.-13. Oktober 2022, Lyon, France], 6 Seiten, 2022Hellenbrand, Gerrit
Klee, Lukas (Corresponding author)
Mevissen, Dieter
Brimmers, Jens
Brecher, Christian
et al. -
[Contribution to a book, Contribution to a conference proceedings]
Influence of Tool and Process Parameters on the Chip Characteristic Values in Hard Skiving and the Minimal Chip Thickness
In: 9th WZL Gear Conference in the USA 2022 : Gear and Transmission Research, July 20th/ 22th 2022, Elgin, IL/ USA( Hosted by Reishauer), 9-1-9-23, 2022Georgoussis, Adrianos (Corresponding author)
Brimmers, Jens
Bergs, Thomas -
[Contribution to a book, Contribution to a conference proceedings]
Approach for multiscale modeling the thermomechanical tool load in gear hobbing
In: International Conference on Gears 2022, 4th International Conference on High Performance Plastic Gears 2022, 4th International Conference on Gear Production 2022 : Garching / Munich, Germany September 12 - 14, 2022 / VDI-Society for Product and Process Design, 1489-1502, 2022
[DOI: 10.51202/9783181023891-1489]Troß, Nico (Corresponding author)
Brimmers, Jens
Bergs, Thomas -
[Contribution to a book, Contribution to a conference proceedings]
Process-Machine Interaction in Gear Honing considering Elastic Honing Ring Behavior
In: 9th WZL Gear Conference in the USA 2022 : Gear and Transmission Research, July 20th/ 22th 2022, Elgin, IL/ USA( Hosted by Reishauer), 5-1-5-21, 2022Schrank, Maximilian Günter (Corresponding author)
Brimmers, Jens
Bergs, Thomas
Turn Page
- First Page
- Previous Page
- 51-100
- 201-250
- 251-300
- Sie sind auf Seite:301-350
- 351-400
- 401-450
- Last Page
- Next Page
- 551-600