Veröffentlichungen
Treffer 301 - 350 von 9142 Ergebnissen
Blättern
- erste Seite
- vorherige Seite
- 51-100
- 201-250
- 251-300
- Sie sind auf Seite:301-350
- 351-400
- 401-450
- letzte Seite
- nächste Seite
- 551-600
-
QuelleBeteiligte
-
[Beitrag zu einem Tagungsband]
Investigations on the Impact of Additively Manufactured Coolant Channels and Outlet Nozzles on Free Jet and Jet Forces in High-Pressure Cutting Fluid Supply
In: Proceedings of the Machining Innovations Conference for Aerospace Industry (MIC) 2021, 41-49, 2021
[DOI: 10.2139/ssrn.3936402]Kelliger, Tobias (Corresponding author)
Liu, Hui
Schraknepper, Daniel
Bergs, Thomas -
[Fachzeitschriftenartikel]
Nachbearbeitung additiv gefertigter Fräswerkzeuge
In: wt Werkstattstechnik online, 111 (11/12), 818-823, 2021
[DOI: 10.37544/1436-4980-2021-11-12-48]Kelliger, Tobias (Corresponding author)
Zachert, Christoph
Schraknepper, Daniel
Bergs, Thomas -
[Fachzeitschriftenartikel]
Industrie 4.0 als Chance gegen den Fachkräftemangel. Eine Betrachtung für den deutschen Mittelstand
In: Industrie 4.0 Management, 37 (1), 12-15, 2021Schuh, Günther
Scholz, Patrick
Scheuer, Thomas
Latz, Tim -
[Fachzeitschriftenartikel]
CBN-Kornverschleißmodellierung/Numerical modeling of CBN grain wear during single grain engagement - CBN-grain wear modelling
In: wt Werkstattstechnik online, 111 (6), 414-418, 2021
[DOI: 10.37544/1436-4980-2021-06-58]Bredthauer, Marc
Mattfeld, Patrick-Marcel
Barth, Sebastian
Bergs, Thomas -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Wear monitoring in fine blanking processes using feature based analysis of acoustic emission signals
In: Procedia CIRP, 104, 164-169, 2021
[DOI: 10.1016/j.procir.2021.11.028]Unterberg, Martin Christian (Corresponding author)
Voigts, Herman Otto
Weiser, Ingo Felix
Feuerhack, Andreas
Trauth, Daniel
et al. -
[Fachzeitschriftenartikel]
Feinschneiden von hochfesten Stahlgüten
In: wt Werkstattstechnik online, 111 (10), 698-703, 2021
[DOI: 10.37544/1436-4980-2021-10-44]Voigts, Herman Otto
Weiser, Ingo Felix
Herrig, Tim
Bergs, Thomas -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Degree of Centralization: Impact on the Economic Efficiency by Considering Different Waste Types
In: IEEE IEEM 21 virtual : 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : 13-16 December 2021 / organizers: IEEE Singapore Section, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 275-279, 2021
[DOI: 10.1109/IEEM50564.2021.9673095]Schuh, Günther
Gützlaff, Andreas
Ays, Julian Leander
Rey, Markus
Schlosser, Tino Xaver (Corresponding author) -
[Buch]
Datenbasierte Geschäftsmodelle - Chancen und Herausforderungen am Beispiel der Batteriezellfertigung, 2021
[DOI: 10.24406/IPT-N-644065]Schuh, Günther
Patzwald, Marc
Latz, Tim
Ismail, Abdus Samad
Holst, Lennard
et al. -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Increasing Agility: A Tangible XR for Rapid Prototype Development, Design Exploration and Usability Assessment
In: Advances in manufacturing, production management and process control : proceedings of the AHFE 2021 Virtual Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, July 25-29, 2021, USA / Stefan Trzcielinski, Beata Mrugalska, Waldemar Karwowski, Emilio Rossi, Massimo Di Nicolantonio, editors, 85-91, 2021
[DOI: 10.1007/978-3-030-80462-6_11]Meyer, Nils Ronald (Corresponding author)
Preutenborbeck, Michael
Usai, Marcel
Briele, Kristof Rene
Witzel, André
et al. -
[Preprint]
Human Action Nodes for Behavior Trees, 2021Behery, Mohamed (Corresponding author)
Trinh, Minh (Corresponding author)
Lakemeyer, Gerhard (Corresponding author) -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Development of measuring systems for contact force and relative velocity in robot-guided centrifugal finishing
In: Procedia CIRP, 104, 14-19, 2021Ohlert, Marius (Corresponding author)
Schriever, Tim
Prinz, Sebastian
Barth, Sebastian
Bergs, Thomas -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Algorithm-Based Optimization of Gear Mesh Efficiency in Stepped Planetary Gear Stages for Electric Vehicles
In: Fall Technical Meeting AGMA 2021, November 1-3, 2021, 136-151, 2021Westphal, Christian Michael (Corresponding author)
Brimmers, Jens
Brecher, Christian -
[Fachzeitschriftenartikel]
Auslegung einer elektrischen Antriebsachse für einen schweren Lkw
In: ATZheavy duty, 14 (2), 20-25, 2021
[DOI: 10.1007/s35746-021-0423-5]Köller, Sven
Uerlich, Roland
Westphal, Christian Michael
Franck, Marius -
[Fachzeitschriftenartikel]
Design of an Electric Drive Axle for a Heavy Truck
In: ATZ heavyduty worldwide, 14 (2), 20-25, 2021
[DOI: 10.1007/s41321-021-0420-8]Köller, Sven
Uerlich, Roland
Westphal, Christian Michael
Franck, Marius -
[Fachzeitschriftenartikel]
Simulazione multibody di trasmissioni epicicloidali per autocarri pesanti
In: Organi di trasmissione, 2021 (6), 30-40, 2021Westphal, Christian Michael (Corresponding author)
Brimmers, Jens
Brecher, Christian -
[Fachzeitschriftenartikel]
Investigation of the Potential of Using Surrogate Models in the Gear Design Process
In: Gear technology, 2021 (Nov/Dez), 68-74, 2021Brimmers, Jens
Willecke, Marius (Corresponding author)
Löpenhaus, Christoph
Brecher, Christian -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Design and Simulation of a Back to Back Test Rig for Ultra High Cycle Fatigue Testing of Gears Under Fully Reversed Load
In: Fall Technical Meeting AGMA 2021, 1.11.2021 to 3.11.2021, Chicago/ USA, 21FTN11 , 20 p., 2021Lövenich, Johannes Peter (Corresponding author)
Zalfen, Moritz Johannes
Malinowski, Oscar
Brecher, Christian
Brimmers, Jens
et al. -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Deep Reinforcement Learning for Robotic Control in High-Dexterity Assembly Tasks : A Reward Curriculum Approach
In: [2021 Fifth IEEE International Conference on Robotic Computing, IRC, 2021-11-15 - 2021-11-17, Taichung, Taiwan], 35-42, 2021
[DOI: 10.1109/IRC52146.2021.00012]Leyendecker, Lars (Corresponding author)
Schmitz, Markus
Zhou, Hans Aoyang
Samsonov, Vladimir
Rittstieg, Marius
et al. -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
CFD simulation to optimize the internal coolant channels of an additively manufactured milling tool
In: Procedia CIRP, 102, 234-239, 2021Zachert, Christoph (Corresponding author)
Liu, Hui
Lakner, Thomas
Schraknepper, Daniel
Bergs, Thomas -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Development of measuring systems for contact force and relative velocity in robot-guided centrifugal finishing
In: Procedia CIRP, 104, 14-19, 2021
[DOI: 10.1016/j.procir.2021.11.006]Ohlert, Marius (Corresponding author)
Schriever, Tim
Prinz, Sebastian
Barth, Sebastian
Bergs, Thomas -
[Buch, Doktorarbeit]
Selbstoptimierendes Haptikprüfsystem
In: Ergebnisse aus der Produktionstechnik 34/2021, 2021Frank, Daniel Sebastian -
[Abstract, Beitrag zu einem Tagungsband]
»JointPromise«: Concept of a multi-step, automated platform for precision manufacturing of joint implants
In: [TERMIS 6th World Congress 2021 : Book of Abstracts], #1857, 1 Seite, 2021Krieger, Judith
Snowball, Stan
Luyte, Frank P.
Schmitt, Robert H. -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
In-situ Evaluation of Surface Integrity Modifications by means of Barkhausen Noise Measurement
In: Procedia CIRP, 102, 465-470, 2021Shimosaka, K.
Bergs, Thomas
Schraknepper, D.
Münstermann, Sebastian
Meurer, Markus Joachim -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Prediction of the depth of dynamically recrystallized microstructure during hard turning of AISI 4140
In: Procedia CIRP, 101, 214-217, 2021Tekkaya, Berk
Meurer, Markus Joachim
Dölz, Michael
Münstermann, Sebastian -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Detecting Out-Of-Control Sensor Signals in Sheet Metal Forming using In-Network Computing
In: 2021 IEEE 30th International Symposium on Industrial Electronics (ISIE), 20-23 June 2021, 6 Seiten, 2021
[DOI: 10.1109/ISIE45552.2021.9576221]Kunze, Ike Sebastian (Corresponding author)
Niemietz, Philipp
Tirpitz, Liam
Glebke, René
Trauth, Daniel
et al. -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Prediction of the depth of dynamically recrystallized microstructure during hard turning of AISI 4140
In: Procedia CIRP, 101, 214-217, 2021
[DOI: 10.1016/j.procir.2021.03.129]Tekkaya, Berk (Corresponding author)
Meurer, Markus Joachim
Dölz, Michael
Münstermann, Sebastian -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
In-situ Evaluation of Surface Integrity Modifications by means of Barkhausen Noise Measurement
In: Procedia CIRP, 102, 465-470, 2021
[DOI: 10.1016/j.procir.2021.09.079]Shimosaka, K. (Corresponding author)
Bergs, Thomas
Schraknepper, D.
Münstermann, Sebastian
Meurer, Markus Joachim -
[Fachzeitschriftenartikel]
Statistical testing for sufficient control chart performances during monitoring of grouped processes
In: Quality and reliability engineering international, 37 (6), 2555-2567, 2021
[DOI: 10.1002/qre.2875]Kostyszyn, Kevin Nikolai (Corresponding author)
Brandstätter, Tobias Claus
Vollmer, Thomas
Schmitt, Robert H. -
[Fachzeitschriftenartikel]
Smarte Einsatzplanung und Schulung zur Qualitätssteigerung : Kompetenzgerechte Personaleinsatzplanung und arbeitsgebundene Schulung als Schlüssel zur Qualitätssteigerung in komplexen Produktionsprozessen
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 116 (12), 945-950, 2021
[DOI: 10.1515/zwf-2021-0213]Motz, Maximilian
Möhle, Janina
Lossie, Karl
Ast, Jonas
Rochow, Niklas E.
et al. -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
An Ecosystem for Digital Shadows in Manufacturing
In: Procedia CIRP, 104, 833-838, 2021Brecher, Christian
Dalibor, Manuela
Rumpe, Bernhard
Schilling, Katrin Laura
Wortmann, Andreas -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
An Ecosystem for Digital Shadows in Manufacturing
In: Procedia CIRP, 104, 833-838, 2021
[DOI: 10.1016/j.procir.2021.11.140]Brecher, Christian
Dalibor, Manuela
Rumpe, Bernhard
Schilling, Katrin Laura (Corresponding author)
Wortmann, Andreas -
[Buchbeitrag, Beitrag zu einem Tagungsband]
State Estimation and Model-Predictive Control for Multi-Robot Handling and Tracking of AGV Motions using iGPS
In: 2021 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) / IROS 2021 Online ; IEEE, RSJ, IEEE MSIT Robotics & Automation Society, SICE, IES, NIF - New Technology Foundation, 1038-1045, 2021
[DOI: 10.1109/IROS51168.2021.9636116]Storm, Christoph (Corresponding author)
Hose, Henrik (Corresponding author)
Schmitt, Robert H. (Corresponding author) -
[Fachzeitschriftenartikel]
Online capability-based resource allocation for on-site construction operations utilizing digital twin models
In: Construction robotics, 5 (3/4), 211-226, 2021
[DOI: 10.1007/s41693-022-00065-4]Münker, Sören (Corresponding author)
Wildemann, Peter R.
Göppert, Mirko Robin Amon
Brell-Cokcan, Sigrid
Schmitt, Robert H. -
Nicksch, Christoph
Leyendecker, Lars
Ma, Guocai
Li, Fei
Cao, Zhihong
et al. -
[Buch, Doktorarbeit]
Implementierung von Subskriptionsmodellen im Maschinen- und Anlagenbau
In: Ergebnisse aus der Produktionstechnik 32/2021, 2021Ebi, Manuel -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Towards predictive quality in production by applying a flexible process-independent meta-model
In: Procedia CIRP, 104, 1251-1256, 2021Liang, Junjie (Corresponding author)
Pelzer, Lukas
Müller, Kai Bruno
Cramer, Simon Tristan
Greb, Christoph
et al. -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Towards predictive quality in production by applying a flexible process-independent meta-model
In: Procedia CIRP, 104, 1251-1256, 2021
[DOI: 10.1016/j.procir.2021.11.210]Liang, Junjie (Corresponding author)
Pelzer, Lukas
Müller, Kai Bruno
Cramer, Simon Tristan
Greb, Christoph
et al. -
[Bericht]
Fertigungsmesstechnik in der digitalen Produktion, 2021Bodenbenner, Matthias Stefan
Bösser, Friedlhelm
Dessel, Sascha
Martin, André
Montavon, Benjamin Leendert
et al. -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Quantification of Influence of 5G Technology Implementation on Process Performance in Production
In: Procedia CIRP, 104, 104-109, 2021Kiesel, Raphael (Corresponding author)
Stichling, Kirstin
Hemmers, Philipp
Vollmer, Thomas
Schmitt, Robert H. -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Methodology for iterative system modeling in agile product development
In: Procedia CIRP, 100, 439-444, 2021Riesener, Michael
Dölle, Christian
Perau, Stefan (Corresponding author)
Lossie, Philipp
Schuh, Günther -
[Fachzeitschriftenartikel]
Erweitertes Berechnungsmodell für Kugelgewindetriebe : Berücksichtigung des Spindelsteigungsfehlers in der Simulation und Auslegung von Kugelgewindetrieben
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 116 (12), 917-921, 2021
[DOI: 10.1515/zwf-2021-0159]Brecher, Christian
Biernat, Benedikt Markus Hubert (Corresponding author)
Vorwerk-Handing, Lennard
Neus, Stephan -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Noise Optimization without Loss of Load-Carrying Capacity?
In: [The Brazilian Gear Conferene 2021 ITA - WZL, 2021-11-09 - 2021-11-10, Sao José dos Campos, Brazil], 2021Kasten, Marcel-Michél (Corresponding author)
Ahmad, Mubarik
Brecher, Christian -
[Fachzeitschriftenartikel]
Market Intelligence führt zu besserem Kundenverständnis : Variantenvielfalt muss sich am Kundennutzen orientieren
In: Industrie-Anzeiger, 144 (17), 22-23, 2021Schuh, Günther
Kuhn, Maximilian
Lender, Benjamin Nils Johannes (Corresponding author) -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Methodology for iterative system modeling in agile product development
In: Procedia CIRP, 100, 439-444, 2021
[DOI: 10.1016/j.procir.2021.05.101]Riesener, Michael
Dölle, Christian
Perau, Stefan (Corresponding author)
Lossie, Philipp
Schuh, Günther -
[Fachzeitschriftenartikel]
Virtuelle Klimatisierung
In: wt Werkstattstechnik online, 111 (11/12), 887-892, 2021
[DOI: 10.37544/1436-4980-2021-11-12-117]Emonts, Dominik
Sanders, Mark Pascal
Dahlem, Jan Philipp
Bodenbenner, Matthias Stefan
Montavon, Benjamin Leendert
et al. -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Quantification of Influence of 5G Technology Implementation on Process Performance in Production
In: Procedia CIRP, 104, 104-109, 2021
[DOI: 10.1016/j.procir.2021.11.018]Kiesel, Raphael (Corresponding author)
Stichling, Kirstin
Hemmers, Philipp
Vollmer, Thomas
Schmitt, Robert H. -
[Buchbeitrag]
Zukunftsfähige Produktionssysteme durch Predictive Quality
In: Masing Handbuch Qualitätsmanagement / Tilo Pfeifer, Robert Schmitt, 799-828, 2021
[DOI: 10.3139/9783446466210.035]Pfeifer, Tilo
Schmitt, Robert H.
Buschmann, Daniel
Ellerich, Max
Huebser, Louis
et al. -
[Buch, Doktorarbeit]
Systematische Bewertung von Änderungsanfragen in der Produktion
In: Schriftenreihe Rationalisierung 180, 2021Külschbach, Andreas -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Functional and Ecological Traceability of Process Chains : a data- and model-based approach
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Editors: Aachen Machine Tool Colloquium AWK ; Thomas Bergs, Christian Brecher, Robert Schmitt, Günther Schuh ; further contributors: Susanne Krause, Alexander Kreppein, Christian Lürken, Markus Meurer, Heidi Peters, Michèle Robrecht, Stefanie Strigl, 237-258, 2021Bergs, Thomas
Brimmers, Jens
Kappmeyer, Gregor
Löpenhaus, C.
Scheffler, Florian
et al. -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Funktionale und ökologische Rückverfolgbarkeit von Prozessketten : Ein daten- und modellbasierter Ansatz
In: Internet of Production - Turning Data into Sustainability : AWK'21 / Herausgeber: AWK Aachener Werkzeugmaschinen-Kolloquium ; Thomas Bergs, Christian Brecher, Robert Schmitt, Günther Schuh ; weitere Mitwirkende: Susanne Krause, Alexander Kreppein, Christian Lürken, Markus Meurer, Heidi Peters, Michèle Robrecht, Stefanie Strigl, 263-287, 2021Bergs, Thomas
Brimmers, Jens
Kappmeyer, Gregor
Löpenhaus, C.
Scheffler, Florian
et al.
Blättern
- erste Seite
- vorherige Seite
- 51-100
- 201-250
- 251-300
- Sie sind auf Seite:301-350
- 351-400
- 401-450
- letzte Seite
- nächste Seite
- 551-600