[Book, Dissertation / PhD Thesis]
Definition und Auslegung von datenbasierten Dienstleistungen im Werkzeugbau
In: Ergebnisse aus der Produktionstechnik 1/2022, 2022

Boshof, Julian

[Contribution to a book, Contribution to a conference proceedings]
Investigation of Combined Flat Coining and Fine Blanking of 16MnCr5 to Influence the Die Roll Formation
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, editors, 112-121, 2021
[DOI: 10.1007/978-3-030-78424-9_13]

Schweinshaupt, Frank Oliver (Corresponding author)
Weiser, Ingo Felix
Herrig, Tim
Bergs, Thomas

[Contribution to a book]
Feinschneidbarkeit von Mangan-Bor-Stahl
In: Tagungsband zum 16. Erlanger Workshop Warmblechumformung 2021, 2022

Weiser, Ingo Felix
Herrig, Tim
Bergs, Thomas

[Book, Dissertation / PhD Thesis]
Cost-efficient design of adaptations for manufacturing process sequences of safety-critical components
In: Ergebnisse aus der Produktionstechnik 2/2022, 2022

Hermann, Lennard W.

[Contribution to a book, Contribution to a conference proceedings]
Controlled Synthesis of Fibre-reinforced Plastics Images from Segmentation Maps using Generative Adversarial Neural Networks
In: Proceedings of the 14th International Conference on Agents and Artificial Intelligence : February 3-5, 2022 / editors: Ana Paula Rocha, Luc Steels and Jaap van den Herik, 801-809, 2022
[DOI: 10.5220/0010913700003116]

Schaaf, Nicolas
Zhou, Hans Aoyang
Enslin, Chrismarie
Brillowski, Florian Sascha
Lütticke, Daniel

[Journal Article]
Model-Based, Experimental Thermoelastic Analysis of a Large Scale Turbine Housing
In: Journal of machine engineering, 22 (1), 84-95, 2022
[DOI: 10.36897/jme/146435]

Emonts, Dominik (Corresponding author)
Sanders, Mark Pascal
Montavon, Benjamin Leendert
Schmitt, Robert H.

[Contribution to a book, Contribution to a conference proceedings]
Optimisation of a Workpiece Clamping Position with Reinforcement Learning for Complex Milling Applications
In: Machine kearning, optimization, and data science: 7th International Conference, LOD 2021, Grasmere, UK, October 4-8, 2021, Revised Selected Papers / Giuseppe Nicosia, Varun Ojha, Emanuele La Malfa, Gabriele La Malfa, Giorgio Jansen, Panos M. Pardalos, Giovanni Giuffrida, Renato Umeton (eds.). - Part II, 261-276, 2022
[DOI: 10.1007/978-3-030-95470-3_20]

Enslin, Chrismarie
Samsonov, Vladimir (Corresponding author)
Köpken, Hans-Georg
Bär, Schirin
Lütticke, Daniel

[Book, Dissertation / PhD Thesis]
Interdisziplinäre Spezifikation produktionstechnischer Systeme
In: Ergebnisse aus der Produktionstechnik 36/2021, 2022

Flender, Jerome

[Contribution to a book, Contribution to a conference proceedings]
Investigation of the Ball Motion Behavior in Spindle Bearings under Dynamic Loads
In: 23rd International Colloquium Tribology : industrial and automotive lubrication : conference proceedings 2022 / published by Ksenija Topolovec-Miklozic, Andreas Pauschitz, Arshia Fatemi ; TAE - Technische Akademie Esslingen, 385-387, 2022

Eckel, Hans-Martin (Corresponding author)
Brecher, Christian
Neus, Stephan

[Journal Article]
Sheared edge defect segmentation using a convolutional U-Net for quantified quality assessment of fine blanked workpieces
In: Precision engineering, 75, 129-141, 2022
[DOI: 10.1016/j.precisioneng.2022.01.010]

Wolfschläger, Dominik (Corresponding author)
Woltersmann, Jan-Henrik
Montavon, Benjamin Leendert
Schmitt, Robert H.

[Journal Article]
Feature selection for measurement models
In: International journal of quality & reliability management, 2022
[DOI: 10.1108/IJQRM-07-2021-0245]

Müller, Tobias
Segin, Alexander
Weigand, Christoph
Schmitt, Robert H.

[Journal Article]
Understanding Kinematics of the Orthogonal Cutting Using Digital Image Correlation : Measurement and Analysis
In: Journal of manufacturing science and engineering, 144 (3), 031008, 2021
[DOI: 10.1115/1.4051917]

Zhang, Dong (Corresponding author)
Meurer, Markus Joachim (Corresponding author)
Zhang, Xiao-Ming (Corresponding author)
Bergs, Thomas (Corresponding author)
Ding, Han (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
Surface Modification of Inconel 718 by Robot-Guided Centrifugal Finishing and Vibratory Finishing
In: Proceedings of the 2nd International Conference on Advanced Surface Enhancement (INCASE 2021) : innovation leading to industrialization / Yuefan Wei, Shuyun Chng editors, 3-7, 2021
[DOI: 10.1007/978-981-16-5763-4_1]

Ohlert, Marius (Corresponding author)
Prinz, Sebastian
Barth, Sebastian
Bergs, Thomas

[Book, Dissertation / PhD Thesis]
Smart retrofitting as a structured approach for an organization to implement industry 4.0 using its existing resources
In: Ergebnisse aus der Produktionstechnik 3/2022, 2022
[DOI: 10.18154/RWTH-2022-01548]

Guerreiro, Bruno Vallarelli

[Book, Dissertation / PhD Thesis]
Organisation von Subskription im Maschinen- und Anlagenbau
In: Ergebnisse aus der Produktionstechnik 35/2021, 2022

Liu, Yuan

[Book, Dissertation / PhD Thesis]
Verbesserung von Effizienz und Zuverlässigkeit der Produktentwicklung durch adaptives Anforderungsmanagement
In: Ergebnisse aus der Produktionstechnik 30/2021, 2022
[DOI: 10.18154/RWTH-2022-01261]

Pickshaus, Tobias

[Journal Article]
Decentralized Holonic Control System Model for Line-less Mobile Assembly Systems
In: Robotics and computer-integrated manufacturing, 75, 102301, 2022
[DOI: 10.1016/j.rcim.2021.102301]

Buckhorst, Armin Friedrich (Corresponding author)
Grahn, Lea
Schmitt, Robert H.

[Book]
Special Issue "5G Technology in Smart Manufacturing"
In: Electronics : open access journal, 2021

Schmitt, Robert H. (Editor)
Sachs, Joachim (Editor)

[Contribution to a book, Contribution to a conference proceedings]
Design and Evaluation of a Function-Oriented Tooth Flank Roughness
In: Aachen Forum on Gear Production: Gear Finishing Technology and Quality Inspection 9th - 10th November 2021 / Thomas Bergs, Christian Brecher (eds.), 177-192, 2022

Lang, Martin (Corresponding author)
Bergs, Thomas
Brimmers, Jens

[Contribution to a book, Contribution to a conference proceedings]
Potentials and Challenges of Profile Gear Grinding with Vitrified Bonded cBN
In: Aachen Forum on Gear Production: Gear Finishing Technology and Quality Inspection 9th - 10th November 2021 / Thomas Bergs, Christian Brecher (eds.), 31-47, 2022

Schalley, Babette (Corresponding author)
Bergs, Thomas
Brimmers, Jens
Solf, Mareike

[Journal Article]
Adaptive surface geometry determination in multi-material x-ray computed tomography using fringe projection
In: Measurement science and technology, 33 (4), 044001, 2022
[DOI: 10.1088/1361-6501/ac41dc]

Großeheide, Jonas
Geiger, Kilian Leonard
Schmidt, Ânderson
Bütow, Calvin
Montavon, Benjamin Leendert
et al.

[Contribution to a book, Journal Article]
Techno-Economic Evaluation of 5G Technology for Automated Guided Vehicles in Production
In: Electronics : open access journal, 11 (2), 192, 2022
[DOI: 10.3390/electronics11020192]

Kiesel, Raphael (Corresponding author)
Henke, Leonhard
Mann, Alexander Wilhelm
Renneberg, Florian
Stich, Volker
et al.

[Journal Article]
Identification and Analysis of Patterns of Machine Learning Systems in the Connected, Adaptive Production
In: Journal of production systems and logistics, 2, 1, 2022
[DOI: 10.15488/11626]

Schuh, Günther
Scholz, Paul
Portik, Johannes

[Book]
Nachhaltigen Wandel gestalten : Innovationsimpulse der RWTH, 2022
[DOI: 10.18154/RWTH-2021-11153]

Förster, Agnes (Responsible party)
Förster, Agnes (Redactor)
Strobel, Eva Christine (Redactor)
Böschen, Stefan Karl Josef (Redactor)
Letmathe, Peter (Redactor)
et al.

[Journal Article]
Method for Calculating Plastic Deformation of High Resolution and Large Contact Area
In: Journal of tribology, 144 (1), 011502, 2021
[DOI: 10.1115/1.4050603]

Sklenak, Sebastian (Corresponding author)
Mevissen, D. (Corresponding author)
Brimmers, Jens (Corresponding author)
Brecher, Christian (Corresponding author)

[Journal Article]
Electrochemical Defect Analysis of Additive Manufactured Components
In: Journal of engineering for gas turbines and power, 144 (1), 011001, 2021
[DOI: 10.1115/1.4052199]

Sous, Florian (Corresponding author)
Herrig, Tim (Corresponding author)
Bergs, Thomas (Corresponding author)
Karges, Florian (Corresponding author)
Feiling, Nicole (Corresponding author)
et al.

[Journal Article]
Effect of electrode material on removal efficiency regarding single discharges in wire EDM
In: The international journal of advanced manufacturing technology, 120 (3/4), 1583-1589, 2021
[DOI: 10.1007/s00170-021-07858-x]

Welschof, Lukas Gabriel (Corresponding author)
Schäfer, Niklas Cedric
Herrig, Tim
Klink, Andreas
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Mobile Robot Base Placement for Assembly Systems: Survey, Measures and Task Clustering
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, editors, 439-447, 2021
[DOI: 10.1007/978-3-030-78424-9_49]

Kluge-Wilkes, Aline Chantal (Corresponding author)
Schmitt, Robert H.

[Contribution to a book, Contribution to a conference proceedings]
Hybrid Modelling in Production: Approach and Evaluation
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, editors, 535-544, 2021
[DOI: 10.1007/978-3-030-78424-9_59]

Dorißen, Jonas (Corresponding author)
Schmitt, Robert H.

[Journal Article]
Express Wire Coil Cladding as an Advanced Technology to Accelerate Additive Manufacturing and Coating
In: Journal of engineering for gas turbines and power, 144 (2), 021003, 2021
[DOI: 10.1115/1.4052089]

Gipperich, Marius (Corresponding author)
Riepe, Jan
Day, Robin (Corresponding author)
Bergs, Thomas (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
Semantically Meaningful Segmentation of Milling Process Data
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, editors, 319-327, 2021
[DOI: 10.1007/978-3-030-78424-9_36]

Ochel, Janis (Corresponding author)
Fey, Marcel
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Internet of Sustainability - Data-Driven Sustainability Management in Production
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, editors, 639-647, 2021
[DOI: 10.1007/978-3-030-78424-9_70]

Briele, Kristof Rene (Corresponding author)
Chhor, Jimmy
Nuy, Leo Max
Sohnius, Felix
Gussen, Lars Christopher Konrad
et al.

[Contribution to a book, Contribution to a conference proceedings]
Quality Improvement Through Data Analysis - Qualification of Failure Management by Standardized Failure Recording in Manual Assembly
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, editors, 574-582, 2021
[DOI: 10.1007/978-3-030-78424-9_63]

Beckschulte, Sebastian (Corresponding author)
Günther, Robin Yannick Rocky
Kiesel, Raphael
Schmitt, Robert H.

[Journal Article]
Approach for multiscale modeling the thermomechanical tool load in gear hobbing
In: Forschung im Ingenieurwesen = Engineering research, 86 (3), 627-638, 2021
[DOI: 10.1007/s10010-021-00531-5]

Troß, Nico (Corresponding author)
Brimmers, Jens
Bergs, Thomas

[Contribution to a book, Journal Article]
Analyse der Wirkmechanismen im fluidfreien Wälzkontakt mit beschichteten Oberflächen
In: Forschung im Ingenieurwesen = Engineering research, 86 (3), 357-366, 2021
[DOI: 10.1007/s10010-021-00534-2]

Sklenak, Sebastian (Corresponding author)
Brimmers, Jens
Brecher, Christian

[Contribution to a conference proceedings, Journal Article]
Enabling automated checking of information in factory planning with ontologies - a case study
In: Procedia CIRP, 2022 (112), 73-78, 2021
[DOI: 10.1016/j.procir.2022.09.047]

Esfahani, Matthias Ebade
Burggräf, Peter
Adlon, Tobias (Corresponding author)
Matoni, Stephan (Corresponding author)

[Contribution to a conference proceedings, Journal Article]
Simulation of friction between diamond and polycrystalline cubic boron nitride
In: Procedia CIRP, 104, 44-49, 2021
[DOI: 10.1016/j.procir.2021.11.008]

Müller, Ulrich Hermann (Corresponding author)
Prinz, Sebastian
Barth, Sebastian
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Online Identification of Dynamic Characteristics for Machine Tool Digital Twin
In: Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21, 2021 (10), 034-095, 2021
[DOI: 10.1299/jsmelem.2021.10.034-095]

Fujita, Tomoya
Xi, Tiandong (Corresponding author)
Ikeda, Ryosuke
Kehne, Sebastian
Fey, Marcel
et al.

[Contribution to a conference proceedings, Journal Article]
Data-based improvement of engineering change impact analyses in manufacturing
In: Procedia CIRP, 99, 580-585, 2021

Schuh, Günther
Gützlaff, Andreas
Sauermann, Frederick Christian
Krug, Marius Paul (Corresponding author)

[Contribution to a conference proceedings, Journal Article]
Creation of an expert system for design validation in BIM-based factory design through automatic checking of semantic information
In: Procedia CIRP, 99, 3-8, 2021

Burggräf, Peter
Dannapfel, Heinrich Matthias
Ebade Esfahani, Matthias Aref (Corresponding author)
Scheidler, Florian

[Journal Article]
Numerische Modellierung des CBN-Kornverschleißes beim Einkorneingriff
In: wt Werkstattstechnik online, 111 (6), 414-418, 2021

Bredthauer, Marc (Corresponding author)
Mattfeld, Patrick-Marcel
Barth, Sebastian
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Kompakte thermo-mechanische Modelle zur schnellen Simulation von Werkzeugmaschinen unter Berücksichtigung von Komponenten mit nichtlinearem Verhalten
In: Tagungsband zum Workshop des GMA FA 1.30 - Modellbildung, Identifikation und Simulation in der Automatisierungstechnik, 269-283, 2021

Vettermann, Julia
Steinert, Alexander (Corresponding author)
Brecher, Christian
Benner, Peter
Saak, Jens

[Journal Article]
KI auf den Menschen ausgerichtet
In: IndustryArena eMagazine, 2021 (3), 28-29, 2021

Petrovic, Oliver (Corresponding author)
Engels, Alexander (Corresponding author)

[Book]
Managing the Fuzzy Front-End: Acht Erfolgsfaktoren für den Ideenprozess produzierender Unternehmen, 2021
[DOI: 10.24406/ipt-n-644066]

Schuh, Günther
Schwarberg, Thomas
Cobanoglu, Gabriel

[Contribution to a book, Contribution to a conference proceedings]
Data Analytics Production Line Optimization Model (DAPLOM) : A Systematic Framework for Process Optimizations
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, editors, 412-420, 2021
[DOI: 10.1007/978-3-030-78424-9_46]

Harman, Durmus (Corresponding author)
Buschmann, Daniel
Scheer, R.
Hellwig, M.
Knapp, M.
et al.

[Patent]
Anordnung aus einem Arbeitssystem zur Verrichtung von Arbeit mittels eines unter Druck stehenden Hydraulikfluids und einer Pumpvorrichtung, 2021

Reese Jimenez, Christian Hans
Fischer, Felix Lukas
Gärtner, Marcus Holger
Schmitz, Katharina

[Patent]
Verfahren zur Herstellung von Zahnflankenmodifikationen an Verzahnungen von Werkstücken sowie Werkzeuge zur Durchführung des Verfahrens, 2021

Löpenhaus, Christoph
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Dynamic Task Allocation for Cooperating, Heterogeneous Assembly Resources in LMAS
In: Towards sustainable customization bridging smart products and manufacturing systems : proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021 / Ann-Louise Andersen, Rasmus Andersen, Thomas Ditlev Brunoe, Maria Stoettrup Schioenning Larsen, Kjeld Nielsen, Alessia Napoleone, Stefan Kjeldgaard editors, 535-542, 2021
[DOI: 10.1007/978-3-030-90700-6_60]

Kluge-Wilkes, Aline Chantal (Corresponding author)
Schmitt, Robert H.

[Patent]
Verfahren zur Kontaktierung der Batteriezellen eines Batteriemoduls und Batterielöschvorrichtung dafür, 2021

Fiedler, Falko
Bergweiler, Georg
Bethlehem, Sören

[Patent]
Verfahren zur Erfassung einer axialen Verlängerung einer rotierenden Welle relativ zu einem Gehäuse, 2021

Fey, Marcel
Brecher, Christian
Eckel, Hans-Martin
Strachkov, Anton