[Buchbeitrag, Beitrag zu einem Tagungsband]
Binder Jetting in Gears: Process Design and Tooth Bending Strength for Gears made of 17-4PH
In: International Conference on Gears 2023: 5th International Conference on High Performance Plastic Gears 2023, 5th International Conference on Gear Production 2023, 1665- 1680, 2023

Klee, Lukas (Corresponding author)
Bergs, Thomas
Solf, Mareike
Brimmers, Jens

[Buchbeitrag, Beitrag zu einem Tagungsband]
Investigation of the machinability of different quenched and tempered steels for the alternative process chain of planetary pinions in wind turbine gearboxes
In: International Conference on Gears 2023: 5th International Conference on High Performance Plastic Gears 2023, 5th International Conference on Gear Production 2023, 1713-1730, 2023

Hendricks, Steffen (Corresponding author)
Solf, M.
Brimmers, Jens
Bergs, T.

[Buchbeitrag, Fachzeitschriftenartikel]
Studies on Protective Coatings for Molding Tools Applied in a Precision Glass Molding Process for a High Abbe Number Glass S-FPM3
In: Coatings : open access journal, 13 (8), 1438, 2023
[DOI: 10.3390/coatings13081438]

Chen, Chong
Friedrichs, Marcel
Jiang, Cheng
Wang, Li-Ang
Dang, Ming-Yang
et al.

[Fachzeitschriftenartikel]
In-process measurement of mechanical loads during electrical discharge machining
In: CIRP annals, manufacturing technology, 72 (1), 461-464, 2023
[DOI: 10.1016/j.cirp.2023.04.080]

Fischer, Andreas (Corresponding author)
Tausendfreund, Andreas
Heß, Dennis Raphael
Petersen, Timm
Stöbener, Dirk

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Practical analysis of productivity of grinding tools in the process of internal generating gear grinding
In: Procedia CIRP, 118, 608-613, 2023
[DOI: 10.1016/j.procir.2023.06.104]

Fujimura, Noritaka (Corresponding author)
de Oliveira Löhrer, Patricia (Corresponding author)
Bergs, Thomas
Spatzig, Alexander

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Calibration and Validation of a 20MnCr5 Material Model for FE-based Analysis of Gear Soft Machining Processes with AdvantEdge
In: Procedia CIRP, 118, 560-565, 2023
[DOI: 10.1016/j.procir.2023.06.096]

Troß, Nico (Corresponding author)
Thimm, Benedikt
Brimmers, Jens
Bergs, Thomas

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Simulative Study of the Applicability of Topological Modifications for Gear Skiving
In: Procedia CIRP, 2023 (118), 465-470, 2023
[DOI: 10.1016/j.procir.2023.06.080]

Janßen, Christopher Maria (Corresponding author)
Brimmers, Jens
Bergs, Thomas

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Validation of a Planar Penetration Calculation for Face Hobbing Generating of Bevel Gears
In: Procedia CIRP, 2023 (118), 477-482, 2023
[DOI: 10.1016/j.procir.2023.06.082]

Kamratowski, Melina (Corresponding author)
Brimmers, Jens
Bergs, Thomas

[Fachzeitschriftenartikel]
Simulation of machining behaviour of two-phase brittle materials during grinding by modelling single-grain scratching using a combination of FE and SPH methods
In: The international journal of advanced manufacturing technology, 128 (3/4), 1709-1723, 2023
[DOI: 10.1007/s00170-023-12006-8]

Dehmer, Alexander Moritz (Corresponding author)
Prinz, Sebastian
Breuer, Roman
Barth, Sebastian
Bergs, Thomas

[Buchbeitrag, Beitrag zu einem Tagungsband]
A Model Calculation of CO2 Emissions Saving Potential for Fine Blanking of Inductively Heated Sheet Metal with Comparison of the Product Variants
In: Manufacturing Driving Circular Economy : Proceedings of the 18th Global Conference on Sustainable Manufacturing, October 5-7, 2022, Berlin / edited by Holger Kohl, Günther Seliger, Franz Dietrich, 685-693, 2023
[DOI: 10.1007/978-3-031-28839-5_77]

Weiser, Ingo Felix (Corresponding author)
Herrig, Tim
Bergs, Thomas

[Fachzeitschriftenartikel]
Effect of mould surface roughness adjustments to increase the flow path length in the injection moulding process
In: Journal of manufacturing processes, 101, 974-981, 2023
[DOI: 10.1016/j.jmapro.2023.06.056]

Mascher, Moritz (Corresponding author)
Heß, Dennis Raphael
Hopmann, Christian
Bergs, Thomas

[Buch, Doktorarbeit]
Material removal and grinding wheel wear mechanisms during grinding of polycrystalline cubic boron nitride
In: Ergebnisse aus der Produktionstechnik 20/2023, 2023
[DOI: 10.18154/RWTH-2023-07507]

Müller, Ulrich Hermann

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Numerical analysis of the load paths and the resulting damage evolution during deep drawing of dual-phase steel
In: IOP conference series / Materials science and engineering, 1284, 012006, 2023
[DOI: 10.1088/1757-899X/1284/1/012006]

Müller, Martina (Corresponding author)
Herrig, Tim
Bergs, Thomas

[Beitrag zu einem Tagungsband]
Energie- und Ressourceneffizienz in der Fertigung
In: Empower Green Production. Tagungsband : AWK '23, 11.-12. Mai 2023 / Robert H. Schmitt, Thomas Bergs, Christian Brecher, Günther Schuh (Hrsg.), 151-182, 2023
[DOI: 10.24406/publica-962]

Bergs, Thomas (Corresponding author)
Barth, Sebastian
Beckers, Alexander
Dehmer, Alexander Moritz
Grünert, Gonsalves
et al.

[Beitrag zu einem Tagungsband]
Energy and Resource Efficiency in Manufacturing
In: Empower Green Production. Conference proceedings : AWK '23, 11.-12. Mai 2023 / Robert H. Schmitt, Thomas Bergs, Christian Brecher, Günther Schuh (Eds.), 142-172, 2023
[DOI: 10.24406/publica-946]

Bergs, Thomas (Corresponding author)
Barth, Sebastian
Beckers, Alexander
Dehmer, Alexander Moritz
Grünert, Golsalves
et al.

[Beitrag zu einem Tagungsband]
Quantification of Sustainability Impact
In: Empower Green Production. Conference proceedings : AWK '23, 11.-12. Mai 2023 / Robert H. Schmitt, Thomas Bergs, Christian Brecher, Günther Schuh (Eds.), 262-284, 2023
[DOI: 10.24406/publica-950]

Bergs, Thomas (Corresponding author)
Niemietz, Philipp
Kaufmann, Tobias
Gelbich, Daria
Mayer, Johannes
et al.

[Beitrag zu einem Tagungsband]
Manufacturing for a Circular Economy
In: Empower Green Production. Conference proceedings : AWK '23, 11.-12. Mai 2023 / Robert H. Schmitt, Thomas Bergs, Christian Brecher, Günther Schuh (Eds.), 118-141, 2023
[DOI: 10.24406/publica-945]

Bergs, Thomas (Corresponding author)
Brimmers, Jens

[Tagungsband]
Empower Green Production. Tagungsband : AWK '23, 11.-12. Mai 2023, 2023
[DOI: 10.24406/publica-939]

Schmitt, Robert H. (Editor)
Bergs, Thomas (Editor)
Brecher, Christian (Editor)
Schuh, Günther (Editor)
Brings, Hanna (Contributor)
et al.

[Tagungsband]
Empower Green Production. Conference Abstracts : 31. AWK 2023, May 11-12, 2023, 2023
[DOI: 10.24406/publica-938]

Schmitt, Robert H. (Editor)
Bergs, Thomas (Editor)
Brecher, Christian (Editor)
Schuh, Günther (Editor)
Brings, Hanna (Contributor)
et al.

[Tagungsband]
Empower Green Production. Conference proceedings : AWK '23, 11.-12. Mai 2023, 2023
[DOI: 10.24406/publica-940]

Schmitt, Robert H. (Editor)
Bergs, Thomas (Editor)
Brecher, Christian (Editor)
Schuh, Günther (Editor)
Brings, Hanna (Contributor)
et al.

[Fachzeitschriftenartikel]
Optimierte Kühlkanäle senken Verschleiß und CO2-Fußabdruck
In: Werkstatt und Betrieb, 2023 (5), 1, 2023

Kelliger, Tobias

[Fachzeitschriftenartikel]
Efficient cutting fluid supply in additively manufactured milling tools
In: European tool & mould making : ETMM, 1, 2023

Kelliger, Tobias

[Fachzeitschriftenartikel]
Effiziente Kühlschmierstoff-Zufuhr in additiv gefertigten Fräswerkzeugen
In: Fräsen+Bohren, 4/2023, 12-13, 2023

Kelliger, Tobias

[Fachzeitschriftenartikel]
Force modeling in generating Gear Grinding Considering the Grinding Worm Topography
In: Gear technology, 40 (3), 51-57, 2023

Löhrer, Patricia (Corresponding author)
Solf, Mareike
Brimmers, Jens
Bergs, Thomas

[Fachzeitschriftenartikel]
Additiv gefertigte Gewindewerkzeuge aus HSS
In: wt Werkstattstechnik online : wt, 113 (6), 242-248, 2023
[DOI: 10.37544/1436-4980-2023-06-34]

Kelliger, Tobias (Corresponding author)
Meurer, Markus Joachim
Bergs, Thomas

[Fachzeitschriftenartikel]
Potential of prediction in manufacturing process and inspection sequences for scrap reduction
In: CIRP journal of manufacturing science and technology, 44, 55-69, 2023
[DOI: 10.1016/j.cirpj.2023.04.012]

Knott, Anna-Lena (Corresponding author)
Stauder, Lars Niklas
Ruan, Xiaoyi
Schmitt, Robert H.
Bergs, Thomas

[Buch, Doktorarbeit]
Entwicklung eines Prozessmodells für die nicht-isotherme vakuumunterstützte Dünnglasumformung
In: Ergebnisse aus der Produktionstechnik 2023,13, 2023
[DOI: 10.18154/RWTH-2023-06531]

Vogel, Paul-Alexander

[Fachzeitschriftenartikel]
Binder jetting in gears : Process design and tooth bending strength for gears made of 17-4PH
In: Forschung im Ingenieurwesen = Engineering research, 2023
[DOI: 10.1007/s10010-023-00670-x]

Klee, Lukas (Corresponding author)
Bergs, Thomas
Solf, Mareike
Brimmers, Jens

[Buchbeitrag]
Materials in the Drive Chain - Modeling Materials for the Internet of Production
In: Internet of production : fundamentals, applications and proceedings / editors: Christian Brecher, Günther Schuh, Wil van der Aalst, Matthias Jarke, Frank T. Piller, Melanie Padberg, 1-21, 2023
[DOI: 10.1007/978-3-030-98062-7_23-1]

Rajaei, Ali
Becker, Marco
Deng, Yuanbin
Schenk, Oliver
Rooein, Soheil
et al.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Optical in Situ Analysis of Gas Bubble Evolution in Electrochemical Machining Based on Similarity Theory Using Particle Image Velocimetry
In: Procedia CIRP, 117, 257-262, 2023
[DOI: 10.1016/j.procir.2023.03.044]

Tchoupe Sambou, Hermann Elio (Corresponding author)
Lauwers, Daniel
Heidemanns, Lukas Franz
Herrig, Tim
Klink, Andreas
et al.

[Bericht]
Industrialisierung von Digitalem Engineering und Additiver Fertigung. Gesammelte Ergebnisse des geförderten Verbundforschungsprojektes, 2023
[DOI: 10.24406/PUBLICA-467]

Sjarov, Martin
Geiger, Kilian Leonard
Horstkotte, Rainer
Laag, Thomas
Kosche, Thomas
et al.

[Bericht]
Precision glass molding process enhancing the expanding of chip-on-tip endoscopes
In: Optics & Photonics International Congress 2023 Yokohama 2023-04-17 - 2023-04-21, 2023
[DOI: 10.24406/publica-1392]

Jiang, Cheng
Friedrichs, Marcel
Grunwald, Tim
Bergs, Thomas

[Konferenzbeitrag]
Precision glass molding process enhancing the expanding of chip on tip endoscopes
In: 9. Biomedical Imaging and Sensing Conference Yokohama 2023-04-19 - 2023-04-19, 2023
[DOI: 10.24406/publica-1391]

Jiang, Cheng (Corresponding author)
Friedrichs, Marcel
Grunwald, Tim
Bergs, Thomas

[Buchbeitrag, Beitrag zu einem Tagungsband]
Simulation of cBN Grain Wear During Single Grain Engagement Considering Cleavage Planes
In: 3rd International Conference on Thermal Issues in Machine Tools (ICTIMT2023) / edited by Steffen Ihlenfeldt, 289-307, 2023
[DOI: 10.1007/978-3-031-34486-2_21]

Bredthauer, Marc (Corresponding author)
Barth, Sebastian
Mattfeld, Patrick-Marcel
Bergs, Thomas

[Buchbeitrag, Beitrag zu einem Tagungsband]
Potential of Densified Binder Jetting Gears Regarding Tooth Root Load Capacity
In: Fraunhofer Direct Digital Manufacturing Conference DDMC 2023. Conference Proceedings, 15. März 2023 16. März 2023, Berlin, Germany, 6 P., 2023

Klee, Lukas (Corresponding author)
Brimmers, Jens (Corresponding author)
Bergs, Thomas

[Buchbeitrag, Beitrag zu einem Tagungsband]
Monitoring of fluctuating material properties for optimizing sheet-metal forming processes: a systematic literature review
In: Material Forming : ESAFORM 2023 : the 26th International ESAFORM Conference on Material Forming: ESAFORM 2023, held in Kraków, Poland, April 19-21, 2023 / editors: Lukasz Madej, Mateusz Sitko, Konrad Perzynskii, 2071-2080, 2023
[DOI: 10.21741/9781644902479-222]

Ortjohann, Lucia Christin (Corresponding author)
Becker, Marco (Corresponding author)
Niemietz, Philipp (Corresponding author)
Bergs, Thomas (Corresponding author)

[Buchbeitrag, Beitrag zu einem Tagungsband]
Coefficient of friction of cemented carbides machined by sinking EDM
In: Material Forming : ESAFORM 2023 : the 26th International ESAFORM Conference on Material Forming: ESAFORM 2023, held in Kraków, Poland, April 19-21, 2023 / editors: Lukasz Madej, Mateusz Sitko, Konrad Perzynskii, 1765-1774, 2023
[DOI: 10.21741/9781644902479-191]

Petersen, Timm (Corresponding author)
Küpper, Ugur (Corresponding author)
Herrig, Tim (Corresponding author)
Bergs, Thomas (Corresponding author)

[Buchbeitrag]
Decision Support for the Optimization of Continuous Processes using Digital Shadows
In: Internet of production : fundamentals, applications and proceedings / editors: Christian Brecher, Günther Schuh, Wil van der Aalst, Matthias Jarke, Frank T. Piller, Melanie Padberg, 1-22, 2023
[DOI: 10.1007/978-3-030-98062-7_12-1]

Idzik, Christian (Corresponding author)
Hilger, Daniel
Hosters, Norbert Michael
Kemmerling, Marco
Niemitz, Philipp
et al.

[Fachzeitschriftenartikel]
Data-driven indirect punch wear monitoring in sheet-metal stamping processes
In: Journal of intelligent manufacturing, 2023
[DOI: 10.1007/s10845-023-02129-w]

Unterberg, Martin Christian (Corresponding author)
Becker, Marco
Niemietz, Philipp
Bergs, Thomas

[Buchbeitrag, Beitrag zu einem Tagungsband]
Chevron cracking during full forward impact extrusion of aluminum alloy EN AW 7075 in dependence of heat treatment condition and tribological system
In: Material Forming : ESAFORM 2023 : the 26th International ESAFORM Conference on Material Forming: ESAFORM 2023, held in Kraków, Poland, April 19-21, 2023 / editors: Lukasz Madej, Mateusz Sitko, Konrad Perzynskii, 445-454, 2023
[DOI: 10.21741/9781644902479-49]

Müller, Martina
Schwark, Niklas (Corresponding author)
Weiser, Ingo Felix
Herrig, Tim
Bergs, Thomas

[Buchbeitrag, Beitrag zu einem Tagungsband]
Influence of process parameters and process set-up on damage evolution during stretch drawing of u-shaped profiles
In: Material Forming : ESAFORM 2023 : the 26th International ESAFORM Conference on Material Forming: ESAFORM 2023, held in Kraków, Poland, April 19-21, 2023 / editors: Lukasz Madej, Mateusz Sitko, Konrad Perzynskii, 727-736, 2023
[DOI: 10.21741/9781644902479-79]

Müller, Martina (Corresponding author)
Weiser, Ingo Felix (Corresponding author)
Herrig, Tim (Corresponding author)
Bergs, Thomas (Corresponding author)

[Buchbeitrag, Beitrag zu einem Tagungsband]
Modification of the surface integrity of powder metallurgically produced S390 via deep rolling
In: Material Forming : ESAFORM 2023 : the 26th International ESAFORM Conference on Material Forming: ESAFORM 2023, held in Kraków, Poland, April 19-21, 2023 / editors: Lukasz Madej, Mateusz Sitko, Konrad Perzynskii, 987-996, 2023
[DOI: 10.21741/9781644902479-108]

Herrmann, Peter (Corresponding author)
Herrig, Tim (Corresponding author)
Bergs, Thomas (Corresponding author)

[Buchbeitrag]
Evolving the Digital Industrial Infrastructure for Production : Steps Taken and the Road Ahead
In: Internet of production : fundamentals, applications and proceedings / editors: Christian Brecher, Günther Schuh, Wil van der Aalst, Matthias Jarke, Frank T. Piller, Melanie Padberg, 1-25, 2023
[DOI: 10.1007/978-3-030-98062-7_2-1]

Pennekamp, Jan (Corresponding author)
Belova, Anastasiia
Bergs, Thomas
Bodenbenner, Matthias Stefan
Bührig-Polaczek, Andreas
et al.

[Buchbeitrag]
Model-based controlling approaches for manufacturing processes
In: Internet of production : fundamentals, applications and proceedings / editors: Christian Brecher, Günther Schuh, Wil van der Aalst, Matthias Jarke, Frank T. Piller, Melanie Padberg, 1-26, 2023
[DOI: 10.1007/978-3-030-98062-7_7-1]

Rüppel, Adrian Karl (Corresponding author)
Ay, Muzaffer
Biernat, Benedikt Markus Hubert
Kunze, Ike Sebastian
Landwehr, Markus
et al.

[Fachzeitschriftenartikel]
Potenziale der modellbasierten Analyse des thermo-mechanischen Verhaltens von Schleifspindeln
In: Diamond business (1), 20-25, 2023

Bredthauer, Marc
Steinert, Alexander (Corresponding author)
Bergs, Thomas
Brecher, Christian
Neus, Stephan
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Orthogonal cutting with additively manufactured grooving inserts made from HS6-5-3-8 high-speed steel
In: Material Forming : ESAFORM 2023 : the 26th International ESAFORM Conference on Material Forming: ESAFORM 2023, held in Kraków, Poland, April 19-21, 2023 / editors: Lukasz Madej, Mateusz Sitko, Konrad Perzynskii, 1235-1244, 2023
[DOI: 10.21741/9781644902479-134]

Kelliger, Tobias (Corresponding author)
Meurer, Markus Joachim (Corresponding author)
Bergs, Thomas (Corresponding author)

[Buch, Doktorarbeit]
Mehrskalenmodellierung der thermomechanischen Werkzeugbelastung beim Trockenwälzfräsen
In: Ergebnisse aus der Produktionstechnik 17/2023, 2023
[DOI: 10.18154/RWTH-2023-04242]

Troß, Nico

[Fachzeitschriftenartikel]
Potentiale der modellbasierten Analyse des thermo-mechanischen Verhaltens von Schleifspindeln
In: Diamond Buisines, 2023 (1), 20-25, 2023

Bredthauer, Marc (Corresponding author)
Steinert, Alexander
Brecher, Christian
Bergs, Thomas
Barth, Sebastian
et al.

[Talk (non-conference)]
Verschleißbedingte Topographieänderung von galvanisch gebundenen cBN-Schleifscheiben und deren Auswirkung auf die thermo-mechanische Belastung
In: Schleiftagung Fellbach, 2023

Bredthauer, Marc

[Fachzeitschriftenartikel]
Effect of different laser texturing patterns on rolling contact surface and its tribological & fatigue life behavior on 100Cr6 bearing steel
In: Wear, 522, No. 204717, 2023
[DOI: 10.1016/j.wear.2023.204717]

Gimeno, Sofía
Mescheder, Holger
Quintana, Iban
Gasión, Alejandro
Arias-Egido, Eduardo
et al.