Publications
Showing 1 - 50 of 9091 Results
-
SourceAuthors and Contributors
-
[Contribution to a conference proceedings, Journal Article]
Investigations on five-axis milling and subsequent five-axis grinding of gears
In: Procedia CIRP, 107, 705-711, 2022
[DOI: 10.1016/j.procir.2022.05.049]Bergs, Thomas
Schneider, Sebastian A. M.
Janßen, Christopher Maria
Jahnel, K.
Ganser, Philip
et al. -
[Preprint]
Towards Digital Shadows for Production Planning and Control in Injection Molding, 2022
[DOI: 10.1016/j.cirpj.2022.05.003]Sapel, Patrick (Corresponding author)
Gannouni, Aymen
Fulterer, Judith
Hopmann, Christian
Schmitz, Mauritius
et al. -
[Journal Article]
AI-Based Failure Management: Value Chain Approach in Commercial Vehicle Industry
In: Procedia CIRP, 109, 251-256, 2022
[DOI: 10.1016/j.procir.2022.05.245]Günther, Robin Yannick Rocky
Beckschulte, Sebastian
Wende, Martin
Mende, Hendrik
Schmitt, Robert H. -
[Journal Article]
Preferences for Single-Turn vs. Multiturn Voice Dialogs in Automotive Use Cases : Results of an Interactive User Survey in Germany
In: IEEE access, 10, 55020-55033, 2022
[DOI: 10.1109/ACCESS.2022.3174592]Burggräf, Peter
Beyer, Moritz (Corresponding author)
Ganser, Jan-Philip
Adlon, Tobias
Müller, Katharina Maria
et al. -
[Journal Article]
Reinforcement Learning in Manufacturing Control: Baselines, challenges and ways forward
In: Engineering applications of artificial intelligence, 112, 104868, 2022
[DOI: 10.1016/j.engappai.2022.104868]Samsonov, Vladimir
Ben Hicham, Karim
Meisen, Tobias -
[Contribution to a conference proceedings]
Explainable AI for error detection in composites : knowledge discovery in artificial neural networks
In: SAMPE EUROPE Conference and Exhibition 2021, Baden, Switzerland, 28-30 September 2021, 2022Brillowski, Florian Sascha (Corresponding author)
Becker, Marco
Vermeulen, Markus
Trauth, Daniel
Bergs, Thomas
et al. -
[Contribution to a book]
A Framework for the Classification of Human-Robot Interactions Within the Internet of Production
In: Human-Computer Interaction. Technological Innovation : Thematic Area, HCI 2022, Held as Part of the 24th HCI International Conference, HCII 2022, Virtual Event, June 26 - July 1, 2022, Proceedings, Part II / edited by Masaaki Kurosu, 427-454, 2022
[DOI: 10.1007/978-3-031-05409-9_33]Baier, Ralph Oliver (Corresponding author)
Dammers, Hannah (Corresponding author)
Mertens, Alexander
Behery, Mohamed
Gossen, Daniel
et al. -
[Journal Article]
Microstructure impact on the machining of two gear steels. Part 1: Derivation of effective flow curves
In: Materials science and engineering / A, 845, 143125, 2022
[DOI: 10.1016/j.msea.2022.143125]Laschet, Gottfried
Abouridouane, M.
Fernández, M.
Budnitzki, M.
Bergs, Thomas -
[Contribution to a conference proceedings, Journal Article]
Application of Transfer Learning for Detecting Fiber Orientations in Images of Fiber Reinforced Plastics
In: Materials science forum, 1064, 79-85, 2022
[DOI: 10.4028/p-bho5so]Zhou, Hans Aoyang
Brillowski, Florian
Greb, Christoph
Lütticke, Daniel -
[Contribution to a conference proceedings, Journal Article]
ProdSim : An Open-source Python Package for Generating High-resolution Synthetic Manufacturing Data on Product, Machine and Shop-Floor Levels
In: Procedia CIRP, 107, 1343-1348, 2022
[DOI: 10.1016/j.procir.2022.05.155]Fuchs, Tom
Enslin, Chrismarie (Corresponding author)
Samsonov, Vladimir
Lütticke, Daniel
Schmitt, Robert H. -
[Book, Dissertation / PhD Thesis]
Gestaltungsmodell für eine vernetzte adaptive Montage im Werkzeugbau
In: Ergebnisse aus der Produktionstechnik 21/2022, 2022Goertz, David -
[Book, Dissertation / PhD Thesis]
Simulation of the dynamic vibration behaviour and spindle speed optimization during the milling process of turbomachinery components
In: Ergebnisse aus der Produktionstechnik 24/2022, 2022Maslo, Semir -
[Contribution to a conference proceedings, Journal Article]
An extended LuGre model for estimating nonlinear frictions in feed drive systems of machine tools
In: Procedia CIRP, 107, 452-457, 2022Xi, Tiandong
Fujita, Tomoya
Kehne, Sebastian
Ikeda, Ryosuke
Fey, Marcel
et al. -
[Contribution to a conference proceedings, Journal Article]
Edge computing-based virtual measuring machine for process-parallel prediction of workpiece quality in metal cutting
In: Procedia CIRP, 107, 363-368, 2022Huang, Ziqi
Wiesch, Marian
Fey, Marcel
Brecher, Christian -
[Poster]
Flying Fuel Cells and the challenges for bipolar plate forming
In: Aachen Hydrogen Colloquium 2022 Aachen 2022-05-03 - 2022-05-04, 2022Horstkotte, Rainer
Gierlings, Sascha
Herrig, Tim
Bergs, Thomas -
[Contribution to a conference proceedings, Journal Article]
Reactive online scheduling of mobile resources for adaptive layout evolution in line-less assembly system
In: Procedia CIRP, 107, 270-275, 2022
[DOI: 10.1016/j.procir.2022.04.044]Kaven, Lea
Rachner, Jonas Sebastian
Schmid, Thomas
Göppert, Mirko Robin Amon
Schmitt, Robert H. -
[Contribution to a conference proceedings, Journal Article]
Evaluation of Material Shortage Effect on Assembly Systems Considering Flexibility Levels
In: Procedia CIRP, 107, 966-971, 2022
[DOI: 10.1016/j.procir.2022.05.093]Melnychuk, Oleksandr
Rachner, Jonas Sebastian
Kaven, Lea
Göppert, Mirko Robin Amon
Schmitt, Robert H.
et al. -
[Contribution to a conference proceedings, Journal Article]
Highly iterative concept development for requirement-compliant air taxis
In: IOP conference series / Materials science and engineering, 1226 (1), Nr. 012043, 8 pp., 2022
[DOI: 10.1088/1757-899X/1226/1/012043]Schuh, Günther
Spangenberg, M.
Meyer-Hollatz, T. -
[Journal Article]
Expectation management in AI implementation projects : a case study
In: EuroMed journal of business, 2022
[DOI: 10.1108/EMJB-10-2021-0161]Buschmeyer, Katharina
Hatfield, Sarah
Heine, Ina
Jahn, Svenja
Markus, Antonia Lea -
[Journal Article]
Human-centered performance management in manual assembly : The impact of gamified KPI provision on performance and motivation
In: International journal of computer integrated manufacturing, 2022
[DOI: 10.1080/0951192X.2022.2078512]Ohlig, Jasmin
Hellebrandt, Thomas Sven (Corresponding author)
Pötters, Patrick
Heine, Ina
Schmitt, Robert H.
et al. -
[Journal Article]
Measurement uncertainty of a new machine-integrated, PSD based approach for thermo-elastic error measurement
In: MM Science journal, 2022, 5713-5720, 2022
[DOI: 10.17973/MMSJ.2022_06_2021191]Brecher, Christian
Spierling, Robert (Corresponding author)
Fey, Marcel -
[Contribution to a book]
An energy efficient production technology for the recycling of thermoplastic tape into a new semi-finished product for further use
In: SAMPE Europe Conference 2021 Baden/Zurich. Innovating Towards Perfection. Baden/Zurich, Switzerland and Online 29-30 September 2021. Volume 2 of 2, 680-687, 2022Schwane, Martin
Schulz, Malena
Janssen, Henning
Brecher, Christian -
[Contribution to a conference proceedings, Journal Article]
Preparation of Papers for IFAC Conferences & Symposia : Adaptive fixture system for reducing machining distortion caused by residual stresses in milling
In: IFAC-PapersOnLine, 55 (2), 264-269, 2022
[DOI: 10.1016/j.ifacol.2022.04.204]Landwehr, Markus
Kalocsay, R. (Corresponding author)
Kolvenbach, Christian
Ganser, Philipp
Bergs, Thomas -
[Contribution to a book]
Cost-effective production of glass fibre reinforced towpregs
In: SAMPE Europe Conference 2021 Baden/Zurich. Innovating Towards Perfection. Baden/Zurich, Switzerland and Online 29-30 September 2021. Volume 1 of 2, 527-534, 2022von Helden, Jonathan
Baumann, Heiko
Janssen, Henning
Brecher, Christian -
[Contribution to a conference proceedings, Journal Article]
ProdSim : An Open-source Python Package for Generating High-resolution Synthetic Manufacturing Data on Product, Machine and Shop-Floor Levels
In: Procedia CIRP, 107, 1343-1348, 2022Fuchs, Tom
Enslin, Chrismarie (Corresponding author)
Samsonov, Vladimir
Lütticke, Daniel
Schmitt, Robert H. -
[Journal Article]
Application of a multi tuned mass disc dampers system to a portal milling machine
In: MM Science journal, 2022 (2), 5620-5628, 2022
[DOI: 10.17973/MMSJ.2022_06_2022048]Brecher, Christian
Zhao, Guifeng (Corresponding author)
Fey, Marcel -
[Contribution to a book, Journal Article]
5G-Based Multi-Sensor Platform for Monitoring of Workpieces and Machines : Prototype Hardware Design and Firmware
In: Electronics : open access journal, 11 (10), 1619, 2022
[DOI: 10.3390/electronics11101619]Mohanram, Praveen
Passarella, Alice
Zattoni, Elena (Corresponding author)
Padovani, Roberto
König, Niels
et al. -
[Contribution to a book, Journal Article]
Smart Automotive E-Mobility—A Proposal for a New Curricula for Engineering Education
In: Education Sciences, 12 (5), 316, 2022
[DOI: 10.3390/educsci12050316]Curiel-Ramirez, Luis Alberto (Corresponding author)
Bautista-Montesano, Rolando
Galluzzi, Renato
Izquierdo-Reyes, Javier
Ramírez-Mendoza, Ricardo A.
et al. -
[Journal Article]
Investigations on the Potential of 5G for the Detection of Wear in Industrial Roller-Burnishing Processes
In: Electronics, 11 (11), 14 pp., 2022
[DOI: 10.3390/electronics11111678]Kosel, Maximilian
Schippers, Tobias
Abdul, Aziz
Ishii, Kristina
Mainczyk, Jacek
et al. -
[Contribution to a book, Journal Article]
Prototype of 5G Integrated with TSN for Edge-Controlled Mobile Robotics
In: Electronics : open access journal, 11 (11), 1666, 2022
[DOI: 10.3390/electronics11111666]Kehl, Pierre (Corresponding author)
Ansari, Junaid
Jafari, Mohammad Hossein
Becker, Paul
Sachs, Joachim
et al. -
[Journal Article]
Empirical Study on 5G NR Cochannel Coexistence
In: Electronics, 11 (11), 13 pp., 2022
[DOI: 10.3390/electronics11111676]Caro, Jordi Biosca
Ansari, Junaid
Sachs, Joachim
de Bruin, Peter
Sivri, Sertap
et al. -
[Contribution to a conference proceedings, Journal Article]
Analysis of tool wear in face hobbing plunging manufacturing processes
In: Procedia CIRP, 107, 1174-1179, 2022Alexopoulos, Charalampos (Corresponding author)
Brimmers, Jens
Bergs, Thomas -
[Journal Article]
A systematic approach towards mastering complexity through hybrid assembly planning
In: CIRP journal of manufacturing science and technology, 15 (38), 159-171, 2022
[DOI: 10.1016/j.cirpj.2022.04.011]Fölling, Carsten (Corresponding author)
Burggräf, Peter
Wang, Siyuan
Adlon, Tobias -
[Journal Article]
Digitale Fabrikplanung als Befähiger zur Erreichung der Klimaziele: Skalierbares Fabrik- und Produktionskonzept für die Serienproduktion von Wasserelektrolyseuren
In: wt Werkstattstechnik online, 112 (04), 210-215, 2022
[DOI: 10.37544/1436-4980-2022-04-10]Burggräf, Peter
Adlon, Tobias
Beyer, Moritz
Xu, Tingni
Lehde genannt Kettler, Nils (Corresponding author)
et al. -
[Contribution to a conference proceedings, Journal Article]
An extended LuGre model for estimating nonlinear frictions in feed drive systems of machine tools
In: Procedia CIRP, 107, 452-457, 2022
[DOI: 10.1016/j.procir.2022.05.007]Xi, Tiandong (Corresponding author)
Fujita, Tomoya
Kehne, Sebastian
Ikeda, Ryosuke
Fey, Marcel
et al. -
[Contribution to a conference proceedings, Journal Article]
Edge computing-based virtual measuring machine for process-parallel prediction of workpiece quality in metal cutting
In: Procedia CIRP, 107, 363-368, 2022
[DOI: 10.1016/j.procir.2022.04.059]Huang, Ziqi (Corresponding author)
Wiesch, Marian
Fey, Marcel
Brecher, Christian -
[Journal Article]
Identification of a Practical Digital Twin for Simulation of Machine Tools
In: International journal of automation technology, 16 (3), 261-268, 2022
[DOI: 10.20965/ijat.2022.p0261]Fujita, Tomoya
Xi, Tiandong (Corresponding author)
Ikeda, Ryosuke
Kehne, Sebastian
Fey, Marcel
et al. -
[Contribution to a book, Contribution to a conference proceedings]
Analysis of the Impact of the Tolerance Chain on the Excitation Behavior in Series Gearboxes
In: Dresdner Maschinenelemente Kolloquium DMK 2022, 293-316, 2022Roth, L. (Corresponding author)
Brimmers, J.
Brecher, C. -
[Journal Article]
Optimierte Antriebs- und Sensorauslegung für intelligente Vorschubachssysteme
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 117 (6), 368-373, 2022
[DOI: 10.1515/zwf-2022-1063]Herfs, Werner
Kehne, Sebastian (Corresponding author)
Neus, Stephan -
[Contribution to a conference proceedings, Journal Article]
Analysis of tool wear in face hobbing plunging manufacturing processes
In: Procedia CIRP, 107, 1174-1179, 2022
[DOI: 10.1016/j.procir.2022.05.127]Alexopoulos, Charalampos (Corresponding author)
Brimmers, Jens
Bergs, Thomas -
[Contribution to a conference proceedings, Journal Article]
Digital Vehicle Protocol based on Distributed Ledger Technology in Production
In: Procedia CIRP, 107, 804-809, 2022Beckschulte, Sebastian (Corresponding author)
Huebser, Louis
Kiesel, Raphael
Schmitt, Robert H. -
[Abstract, Contribution to a conference proceedings, Journal Article]
Towards Automated Car-T Cell Manufacturing - Keeping up with Technological Advancement
In: Cytotherapy : official journal of ISCT, the International Society for Cellular Therapy, 24 (5, Supplement), S166-S166, 2022
[DOI: 10.1016/S1465-3249(22)00437-6]Herbst, Laura Marie
Erkens, Frederik
Hort, Simon
Baeckel, Niklas
Niessing, Bastian
et al. -
[Contribution to a conference proceedings, Journal Article]
Digital Vehicle Protocol based on Distributed Ledger Technology in Production
In: Procedia CIRP, 107, 804-809, 2022
[DOI: 10.1016/j.procir.2022.05.066]Beckschulte, Sebastian (Corresponding author)
Huebser, Louis
Kiesel, Raphael
Schmitt, Robert H. -
[Contribution to a book, Journal Article]
Techno-Economic Evaluation of 5G-NSA-NPN for Networked Control Systems
In: Electronics : open access journal, 11 (11), 1736, 2022
[DOI: 10.3390/electronics11111736]Kiesel, Raphael (Corresponding author)
Schmitt, Sarah
König, Niels
Brochhaus, Maximilian
Vollmer, Thomas
et al. -
[Journal Article]
Towards digital shadows for production planning and control in injection molding
In: CIRP journal of manufacturing science and technology : CIRP-JMST, 38, 243-251, 2022
[DOI: 10.1016/j.cirpj.2022.05.003]Sapel, Patrick (Corresponding author)
Gannouni, Aymen
Fulterer, Judith
Hopmann, Christian
Schmitz, Mauritius
et al. -
[Book, Dissertation / PhD Thesis]
Bewertung von Produktvarianten mittels Process Data Mining
In: Ergebnisse aus der Produktionstechnik 18/2022, 2022Menges, Alexander Dominic -
[Contribution to a book, Journal Article]
Design for 3D Printed Tools: Mechanical Material Properties for Direct Polymer Additive Tooling
In: Polymers, 14 (9), 1694, 2022
[DOI: 10.3390/polym14091694]Frohn-Sörensen, Peter (Corresponding author)
Geueke, Michael
Engel, Bernd
Löffler, Bernd Wolfgang (Corresponding author)
Bickendorf, Philipp
et al. -
[Book, Dissertation / PhD Thesis]
Datenbasierte Beschreibung der Prozessperformance in der Auftragsabwicklung
In: Ergebnisse aus der Produktionstechnik 23/2022, 2022Schmitz, Seth -
[Book, Dissertation / PhD Thesis]
Applikation maschinell lernender Systeme in der vernetzten adaptiven Produktion
In: Ergebnisse aus der Produktionstechnik 19/2022, 2022Scholz, Paul -
[Book, Dissertation / PhD Thesis]
Standortrollen in Produktionsnetzwerken
In: Ergebnisse aus der Produktionstechnik 10/2022, 2022Fränken, Bastian