[Fachzeitschriftenartikel]
Method for Calculating Plastic Deformation of High Resolution and Large Contact Area
In: Journal of tribology, 144 (1), 011502, 2021
[DOI: 10.1115/1.4050603]

Sklenak, Sebastian (Corresponding author)
Mevissen, D. (Corresponding author)
Brimmers, Jens (Corresponding author)
Brecher, Christian (Corresponding author)

[Fachzeitschriftenartikel]
Electrochemical Defect Analysis of Additive Manufactured Components
In: Journal of engineering for gas turbines and power, 144 (1), 011001, 2022
[DOI: 10.1115/1.4052199]

Sous, Florian
Herrig, Tim
Bergs, Thomas
Karges, Florian
Feiling, Nicole
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Dynamic Task Allocation for Cooperating, Heterogeneous Assembly Resources in LMAS
In: Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems : Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021 / edited by Ann-Louise Andersen, Rasmus Andersen, Thomas Ditlev Brunoe, Maria Stoettrup Schioenning Larsen, Kjeld Nielsen, Alessia Napoleone, Stefan Kjeldgaard, 535-542, 2021
[DOI: 10.1007/978-3-030-90700-6_60]

Kluge-Wilkes, Aline Chantal (Corresponding author)
Schmitt, Robert H.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Mobile Robot Base Placement for Assembly Systems: Survey, Measures and Task Clustering
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, Editors, 439-447, 2021
[DOI: 10.1007/978-3-030-78424-9_49]

Kluge-Wilkes, Aline Chantal (Corresponding author)
Schmitt, Robert H.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Hybrid Modelling in Production: Approach and Evaluation
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, Editors, 535-544, 2021
[DOI: 10.1007/978-3-030-78424-9_59]

Dorißen, Jonas (Corresponding author)
Schmitt, Robert H.

[Fachzeitschriftenartikel]
Express Wire Coil Cladding as an Advanced Technology to Accelerate Additive Manufacturing and Coating
In: Journal of engineering for gas turbines and power, 144 (2), 021003, 2021
[DOI: 10.1115/1.4052089]

Gipperich, Marius (Corresponding author)
Riepe, Jan
Day, Robin (Corresponding author)
Bergs, Thomas (Corresponding author)

[Buchbeitrag, Beitrag zu einem Tagungsband]
Semantically Meaningful Segmentation of Milling Process Data
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, Editors, 319-327, 2021
[DOI: 10.1007/978-3-030-78424-9_36]

Ochel, Janis (Corresponding author)
Fey, Marcel
Brecher, Christian

[Buchbeitrag, Beitrag zu einem Tagungsband]
Internet of Sustainability – Data-Driven Sustainability Management in Production
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis Editors, 639-647, 2021
[DOI: 10.1007/978-3-030-78424-9_70]

Briele, Kristof Rene (Corresponding author)
Chhor, Jimmy
Nuy, Leo Max
Sohnius, Felix
Gussen, Lars Christopher Konrad
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Quality Improvement Through Data Analysis - Qualification of Failure Management by Standardized Failure Recording in Manual Assembly
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis Editors, 574-582, 2021
[DOI: 10.1007/978-3-030-78424-9_63]

Beckschulte, Sebastian (Corresponding author)
Günther, Robin Yannick Rocky
Kiesel, Raphael
Schmitt, Robert H.

[Fachzeitschriftenartikel]
An Improved Model for Contour Damage Compensation in 3D Waterjet Machining
In: Procedia CIRP, 102, 387 - 392, 2021
[DOI: 10.1016/j.procir.2021.09.066]

Dadgar, M.
Schreiner, T.
Schüler, M.
Herrig, T.
Bergs, T.

[Fachzeitschriftenartikel]
Production rescheduling through product quality prediction
In: Procedia manufacturing, 54, 142 - 147, 2021
[DOI: 10.1016/j.promfg.2021.07.022]

Frye, Maik
Gyulai, Dávid
Bergmann, Júlia
Schmitt, Robert H.

[Fachzeitschriftenartikel]
Industry 4.0 Readiness: a new framework for maturity evaluation based on a bibliometric study of scientific articles from 2001 to 2020
In: 00127353, 88 (218), 109-117, 2021
[DOI: 10.15446/dyna.v88n218.92543]

da Silva, I. A.
Barbalho, S. C. M.
Adam, Tobias
Heine, Ina
Schmitt, Robert H.

[Fachzeitschriftenartikel]
FAIR sensor services - Towards sustainable sensor data management
In: Measurement: sensors, 18, 100206, 2021
[DOI: 10.1016/j.measen.2021.100206]

Bodenbenner, Matthias Stefan (Corresponding author)
Montavon, Benjamin Leendert (Collaboration author)
Schmitt, Robert H. (Collaboration author)

[Buchbeitrag, Beitrag zu einem Tagungsband]
Korrelationsbasierte Erkennung von Montagereihenfolgen mittels 6 DoF-Zeitreihendaten zur Prozessdiagrammerstellung
In: Qualitätsmanagement in den 20er Jahren - Trends und Perspektiven : Bericht zur GQW-Jahrestagung 2020 in Koblenz / Bert Leyendecker Hrsg., 120-145, 2021
[DOI: 10.1007/978-3-662-63243-7_7]

Huebser, Louis (Corresponding author)
Thamm, Sascha
Hellebrandt, Thomas
Heine, Ina
Schmitt, Robert H.

[Tagungsband]
Human-centered performance management in manual assembly, 2021
[DOI: 10.1016/j.procir.2020.05.261]

Ohlig, Jasmin
Hellebrandt, Thomas
Poetters, Patrick
Heine, Ina
Schmitt, Robert H.
et al.

[Fachzeitschriftenartikel]
Augmented Intelligence – Mensch trifft Künstliche Intelligenz
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 116 (6), 433-437, 2021
[DOI: 10.1515/zwf-2021-0104]

Hellebrandt, Thomas
Huebser, Louis
Adam, Tobias
Heine, Ina
Schmitt, Robert H.

[Buchbeitrag]
Qualitätsgerechte Organisationsstrukturen
In: Masing Handbuch Qualitätsmanagement, 39–53, 2021
[DOI: 10.3139/9783446466210.003]

Hellebrandt, Thomas Sven
Heine, Ina
Schmitt, Robert H.
Pfeifer, Tilo

[Buchbeitrag]
Future Assembly - Automation Beyond Mass Production
In: Internet of Production - Turning Data into Sustainability, 176-199, 2021
[DOI: 10.24406/IPT-N-640533]

Schmitt, Robert H.
Eickhorst, Dirk
Flöter, Felix
Freeman, Philip L.
Göppert, Mirko Robin Amon
et al.

[Buchbeitrag]
Montage der Zukunft - Automatisierung jenseits der Massenproduktion
In: Internet of Production - Turning Data into Sustainability, 195-221, 2021

Schmitt, Robert H.
Eickhorst, Dirk
Flöter, Felix
Freeman, Philip L.
Göppert, Mirko Robin Amon
et al.

[Buchbeitrag]
Nachhaltige Produktion durch Predictive Quality und Sustainability Analytics entlang der Lieferkette : Monetarisierungseffekte bei einem unternehmensübergreifenden Datenaustausch
In: Monetarisierung von technischen Daten: Innovationen aus Industrie und Forschung / Daniel Trauth, Thomas Bergs, Wolfgang Prinz (Hrsg.), 521-536, 2021
[DOI: 10.1007/978-3-662-62915-4_26]

Schmitt, Robert H. (Corresponding author)
Buschmann, Daniel (Corresponding author)
Briele, Kristof Rene
Schlegel, Peter
Ellerich, Max

[Buchbeitrag]
Predictive Quality – Data Analytics zur Steigerung unternehmerischer Nachhaltigkeit
In: Internet of Production - Turning Data into Sustainability : AWK'21, 289-318, 2021

Schmitt, Robert H.
Kurzhals, Reiner
Kiesel, Raphael
Nilgen, Guido
Schlegel, Peter (Corresponding author)
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Manufacturing Technologies for Fir Tree Slots : A Technological and Economic Evaluation
In: Proceedings of ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition : June 7-11, 2021, virtual, online / conference sponsor: International Gas Turbine Institute. - Volume 7: Industrial and cogeneration, manufacturing materials and metallurgy, GT2021-59652, V007T17A014, 6 Seiten, 2021
[DOI: 10.1115/GT2021-59652]

Heidemanns, Lukas Franz
Seelbach, Tobias Markus
Küpper, Ugur
Seimann, Martin Albert
Bergs, Thomas

[Buchbeitrag, Beitrag zu einem Tagungsband]
Electrochemical Defect Analysis (EC-D) of Additive Manufactured Components
In: Proceedings of ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition : June 7-11, 2021, virtual, online / conference sponsor: International Gas Turbine Institute. - Volume 7: Industrial and cogeneration, manufacturing materials and metallurgy, 2021
[DOI: 10.1115/GT2021-59482]

Sous, Florian
Herrig, Tim
Bergs, Thomas
Karges, Florian
Feiling, Nicole
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Tolerance-Based Optimization of Sinking EDM for Industrial Seal Slot Manufacture
In: Proceedings of ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition : June 7-11, 2021, virtual, online / conference sponsor: International Gas Turbine Institute. - Volume 7: Industrial and cogeneration, manufacturing materials and metallurgy, 2021
[DOI: 10.1115/GT2021-59266]

Petersen, Timm
Zeis, Markus
Bergs, Thomas

[Fachzeitschriftenartikel]
Tolerance-based Optimization of Sinking Edm for Industrial Seal Slot Manufacture
In: Journal of engineering for gas turbines and power, ?, ?, 2021
[DOI: 10.1115/1.4052562]

Petersen, Timm
Zeis, Markus
Bergs, Thomas

[Fachzeitschriftenartikel]
Effect of electrode material on removal efficiency regarding single discharges in wire EDM
In: The international journal of advanced manufacturing technology, ?, ?, 2021
[DOI: 10.1007/s00170-021-07858-x]

Welschof, Lukas Gabriel
Schäfer, Niklas
Herrig, Tim
Klink, Andreas
Bergs, Thomas

[Fachzeitschriftenartikel]
Investigation on residual stress induced by multiple EDM discharges
In: Procedia CIRP, 102, 482 - 487, 2021
[DOI: 10.1016/j.procir.2021.09.082]

Schneider, Sebastian
Vorspohl, Julian
Frerichs, Friedhelm
Klink, Andreas
Meinke, Matthias
et al.

[Fachzeitschriftenartikel]
Modelling of Energy Distribution in SEDM on the Basis of Gas Bubble Observations
In: Procedia CIRP, 102, 293 - 298, 2021
[DOI: 10.1016/j.procir.2021.09.050]

Petersen, Timm
Schneider, Sebastian
Klink, Andreas
Bergs, Thomas

[Fachzeitschriftenartikel]
Concept for the experimental and numerical study of fluid-structure interaction and gas transport in Precise Electrochemical Machining
In: Procedia CIRP, 102, 204 - 209, 2021
[DOI: 10.1016/j.procir.2021.09.035]

Rommes, B.
Lauwers, D.
Herrig, Tim
Meinke, Matthias
Schröder, Wolfgang
et al.

[Fachzeitschriftenartikel]
Process Performance of High Energy Wire EDM
In: Procedia CIRP, 101, 230 - 233, 2021
[DOI: 10.1016/j.procir.2020.11.012]

Küpper, Ugur
Herrig, Tim
Welling, D.
Bergs, Thomas

[Fachzeitschriftenartikel]
Experimental investigation of abrasive properties in waterjet machining
In: Procedia CIRP, 101, 210 - 213, 2021
[DOI: 10.1016/j.procir.2021.03.128]

Schüler, M.
Dadgar, M.
Herrig, Tim
Klink, Andreas
Bergs, Thomas

[Fachzeitschriftenartikel]
Understanding the Influence of Chemical and Thermal Loads on the Productivity for Processing 42CrMo4 Steel and Titanium via Laser-Induced Thermochemical Machining
In: Procedia CIRP, 101, 202 - 205, 2021
[DOI: 10.1016/j.procir.2020.11.009]

Eckert, S.
Vollertsen, F.
Schupp, Alexander
Zander, Brita Daniela
Rommes, B.
et al.

[Fachzeitschriftenartikel]
The Concept of Digital Twin and Digital Shadow in Manufacturing
In: Procedia CIRP, 101, 81 - 84, 2021
[DOI: 10.1016/j.procir.2021.02.010]

Bergs, Thomas
Gierlings, Sascha
Auerbach, Thomas
Klink, Andreas
Schraknepper, Daniel
et al.

[Fachzeitschriftenartikel]
Comparison of Process Signatures for thermally dominated processes
In: CIRP journal of manufacturing science and technology, 35, 217 - 235, 2021
[DOI: 10.1016/j.cirpj.2021.06.013]

Karpuschewski, B.
Lübben, Th.
Meinke, Matthias
Eckert, S.
Frerichs, F.
et al.

[Fachzeitschriftenartikel]
Microstructural and chemical surface and rim zone changes of ferrite‐perlite 42CrMo4 steel after electrochemical machining
In: Materials science and engineering technology, 52 (11), 1214 - 1229, 2021
[DOI: 10.1002/mawe.202100087]

Ehle, L. C.
Harst, Simon Christoph
Meyer, H.
Schupp, Alexander
Beyß, Oliver
et al.

[Buchbeitrag]
Evaluation Design for Learning with Mixed Reality in Mining Education Based on a Literature Review
In: Learning and Collaboration Technologies: Games and Virtual Environments for Learning : 8th International Conference, LCT 2021, Held as Part of the 23rd HCI International Conference, HCII 2021, Virtual Event, July 24–29, 2021, Proceedings, Part II / edited by Panayiotis Zaphiris, Andri Ioannou, 313-325, 2021
[DOI: 10.1007/978-3-030-77943-6_21]

Thurner, Stefan
Daling, Lea M.
Ebner, Markus
Ebner, Martin (Corresponding author)
Schön, Sandra

[Buchbeitrag, Fachzeitschriftenartikel]
Reprint of : Application cases of biological transformation in manufacturing technology
In: CIRP journal of manufacturing science and technology : CIRP-JMST, 34, 95-104, 2021
[DOI: 10.1016/j.cirpj.2021.06.008]

Bergs, Thomas (Corresponding author)
Schwaneberg, Ulrich
Barth, Sebastian
Hermann, L.
Grunwald, Tim
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
A Decision Matrix for Implementing AR, 360° and VR Experiences into Mining Engineering Education
In: HCI International 2021 - Posters : 23rd HCI International Conference, HCII 2021, Virtual Event, July 24–29, 2021, Proceedings, Part I, 225-232, 2021
[DOI: 10.1007/978-3-030-78642-7_30]

Daling, Lea M. (Corresponding author)
Khodaei, Samira
Abdelrazeq, Anas
Isenhardt, Ingrid

[Buchbeitrag, Beitrag zu einem Tagungsband]
An innovative approach to connect parcel delivery operations with urban congestion
In: 2021 7th International Conference on Models and Technologies for Intelligent Transportation Systems (MT-ITS) : [Proceedings] - IEEE, 2021. - ISBN 978-1-7281-8995-6 - doi:10.1109/MT-ITS49943.2021.9529313, 6 Seiten, 2021
[DOI: 10.1109/MT-ITS49943.2021.9529313]

Loder, Allister
Otte, Thomas (Corresponding author)

[Buchbeitrag, Beitrag zu einem Tagungsband]
A Reference Framework for the Performance-Based Decision Support of City Authorities in Urban Freight Transport
In: 2021 International Conference on ICT for Smart Society (ICISS) : [Proceedings] - IEEE, 2021. - ISBN 978-1-6654-1697-9 - doi:10.1109/ICISS53185.2021.9533210, 7 Seiten, 2021
[DOI: 10.1109/ICISS53185.2021.9533210]

Otte, Thomas (Corresponding author)
Meisen, Tobias (Corresponding author)

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Expert System for the Machine Learning Pipeline in Manufacturing
In: IFAC-PapersOnLine, 54 (1), 128-133, 2021
[DOI: 10.1016/j.ifacol.2021.08.014]

Frye, M.
Krauß, J.
Schmitt, Robert H.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
DPART : a dital twin framework for the machining domain
In: MM Science journal, 2021 (5), 5134-5141, 2021
[DOI: 10.17973/MMSJ.2021_11_2021168]

Ganser, P. (Corresponding author)
Venek, T.
Rudel, V.
Bergs, Thomas

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Fundamental Investigations on the Machinability of Additively Manufactured Multi-Materials
In: MM Science journal, 2021, 5098-5105, 2021
[DOI: 10.17973/MMSJ.2021_11_2021160]

Kelliger, T. (Corresponding author)
Schraknepper, D.
Bergs, Thomas

[Buch, Doktorarbeit]
Feinschneiden mit Hartmetallstempeln
In: Ergebnisse aus der Produktionstechnik 26/2021, 2021

Voigts, Herman Otto

[Fachzeitschriftenartikel]
Identifikation qualitätskritischer Parameter
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 116 (10), 695-700, 2021
[DOI: 10.1515/zwf-2021-0154]

Abramowski, Johann-Philip (Corresponding author)
Kies, Alexander
Landwehr, Inga
Aichele, Andreas
Hachgenei, Enno
et al.

[Fachzeitschriftenartikel]
On the simulation of the first natural frequency of a tuned mass disc damper
In: MM Science journal, 2021 (4), 4924-4929, 2021
[DOI: 10.17973/MMSJ.2021_10_2021091]

Brecher, Christian
Zhao, Guifeng (Corresponding author)
Fey, Marcel

[Bericht]
Resilienz in der Strategiearbeit: Eine Bestandsaufnahme, 2021
[DOI: 10.24406/IPT-N-640933]

Schuh, Günther
Patzwald, Marc
Krebs, Leonie

[Buchbeitrag, Beitrag zu einem Tagungsband]
A Conceptual Model for Digital Shadows in Industry and Its Application
In: Conceptual Modeling : 40th International Conference, ER 2021, Virtual Event, October 18–21, 2021, Proceedings / Aditya Ghose, Jennifer Horkoff, Vítor E. Silva Souza, Jeffrey Parsons, Joerg Evermann, 271-281, 2021
[DOI: 10.1007/978-3-030-89022-3_22]

Becker, Fabian
Bibow, Pascal
Dalibor, Manuela
Gannouni, Aymen
Hahn, Viviane
et al.

[Abstract, Beitrag zu einem Tagungsband]
Development of a technical-economic evaluation model for sustainable multifilament wound composite pressure vessels based on a Fuzzy Logic approach
In: Aachen-Dresden-Denkendorf : International Textile Conference : Digital Event, November 9-10, 2021 : Book of abstracts / Organization: Textil- und Faserforschung Denkendorf (DITF), DWI-Leibniz-Institut für Interaktive Materialien, Aachen, ITM, Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik der TU Dresden. - Scientific Board - Wissenschaftlicher Beirat: Bayram Aslan, Michael R. Buchmeiser, Chokri Cherif, Andreas Fery, Götz T. Gresser, Thomas Gries, Jochen Gutmann, Stefan Hecht, Andreas Herrmann, Heike Illing-Günther, Maike Rabe, Fabian Schreiber, Mathias Ulbricht, Lutz Vossebein, 70-71, 2021

Kreutzer, Dennis (Corresponding author)
Mölling, Tim
Bitter-Krahe, Jan
Hees, Frank

[Beitrag zu einem Tagungsband]
Determination Of The Level Of Automation For Additive Manufacturing Process Chains
In: [2nd Conference on Production Systems and Logistics, CPSL 2021], 585-594, 2021
[DOI: 10.15488/11257]

Horstkotte, Rainer
Bruning, Benedikt
Prümmer, Marcel
Arntz, Kristian
Bergs, Thomas