Measuring Room

  Scientist in the measuring room Copyright: WZL/Winandy

Contact

Name

Thomas Fischer

Head of Measuring room

Phone

work
+49 241 80 26313

Email

E-Mail
 

On the basis of more than 30 years of expertise and highly qualified technical employees, the WZL offers metrological services for industry on a total area of 200 square metres. The air-conditioned measuring room is equipped with high-precision coordinate and gear measuring machines as well as many other devices for form, surface, contour and hardness measurement.

As a service provider, we have specialized in complex metrological tasks that often cannot be carried out with the measurement technology available in the company or which exceed the company's own capacity at short notice. The WZL with its measuring room stands for high-precision, certified and traceable measuring and testing technology according to the latest state of research and technology.

Your advantage

As a service provider we have specialized in complex metrological tasks, which often cannot be carried out with the measurement technology available in the company or which exceed the company's own capacity at short notice.

Especially for measuring tasks that do not have to be performed frequently, such as the calibration of test specimens, the purchase of a special testing device or the use of prototypes does not make sense.

The WZL with its measuring room stands for high-precision, certified and traceable measuring and testing technology according to the latest state of research and technology.

 

Measuring systems

Name Features
Zeiss Micura
  • Coordinate Measuring Machine
  • Measuring range: 500mm x 700mm x 500mm
  • Length measurement deviation MPE(E0) = 0,7μm + L/400μm
Zeiss Prismo Navigator
  • Coordinate measuring machine with rotary table
  • Measuring range: 900mm x 1500mm x 700mm
  • Length measurement deviation MPE(E0) = 0,9μm + L/350μm
Zeiss Center Max
  • Coordinate Measuring Machine
  • Measuring range: 1100mm x 1200mm x 700mm
  • Length measurement deviation MPE(E0) = 1,3μm + L/350μm
Klingelnberg P65
  • Gear measuring device
  • Module 0.35 to 35 mm
  • Max. Test diameter 650 mm
  • Shaft measurement according to VDI / VDE 2617 sheet 2.1 MPEE = 1.8 μm + L/250
Klingelnberg P16
  • Gear measuring device
  • Module 0.3 to 8 mm
  • Max. Test diameter 160 mm
  • Shaft measurement according to VDI / VDE 2617 sheet 2.1 U1 = 1.8 + L/250
Keyence VK-X
  • Confocal laser scanning measuring microscope
Alicona Infinite Focus G5
  • Surface and geometry measuring device
  • Focus Variation
Algona Mikro CAD
  • Surface and geometry measuring device
  • Strip light projection
Mahr LD260
  • Tactile surface measuring device
  • Roughness and contour
  • 3D topography measurements
Mahr XR20 und XC 20
  • Tactile surface measuring instruments
  • Roughness and contour
Jenoptik Nanoscan 855
  • Tactile surface measuring device
  • Roughness and contour
  • 3D topography measurements
Mahr Formtester MMQ 400
  • Tactile roundness measuring device
  • Measuring range: 280mm x 500mm
Keyence VHX 6000 und VHX 5000
  • Digital microscope
  • Magnification: 50x to 2,000x
Werth Tomoscope HV Compact
  • Computer tomograph
  • Material testing, dimensional measurement
  • Tube voltage: 225 KV
  • Max. component dimension: Ømax. = approx. 451 mm; Lmax. = approx. 652 mm
Mahr MM 420
  • Workshop measuring microscope
  • Magnification: 35x to 225x
Mettler - Toledo
Typ MS1003TS/00, XPE3003S, ML104T/00
  • Analytical balances 125 grams to 3,500 grams
Mettler - Toledo
Typ ICS435s-B60/t/M
  • Laboratory balance up to 60 kg
Zwick Härteprüfgerät ZHU250CL-a
  • Macro hardness tester (Vickers / Rockwell / Brinell)