[Contribution to a conference proceedings, Journal Article]
Feasibility and Process capability of polymer additive injection molds with slide technology
In: Procedia CIRP, 2020 (93), 102-107, 2020
[DOI: 10.1016/j.procir.2020.03.057]

Schuh, G.
Bergweiler, G.
Lukas, G.
Abrams, Josef Andrew (Corresponding author)

[Journal Article]
Digitale Transformation in der Produktionsplanung und -steuerung - Ergebnisse einer gemeinsamen Studie der produktionstechnischen Institute Fraunhofer IGCV, IFA, IPMT und WZL
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (4), 252-256, 2020
[DOI: 10.3139/104.112271]

Scherwitz, Philipp
Bank, Lukas
Roth, Stefan
Theumer, Philipp
Mundt, Christopher
et al.

[Journal Article]
Sind Audits immer zeitraubend und unwirksam? : Warum digitalisierte Audits großes Potenzial haben
In: Qualität und Zuverlässigkeit : QZ, 65 (12), 42-45, 2020

Buschmann, Daniel (Corresponding author)
Stoffers, Alexander
Schmitt, Robert H.

[Contribution to a conference proceedings, Journal Article]
Global Reference System for factory-wide integration of metrology enabling flexible automation in aeroplane assembly – requirements, concept and suitable technologies
In: Procedia manufacturing, 2020 (52), 89-94, 2020
[DOI: 10.1016/j.promfg.2020.11.017]

Nicksch, C. (Corresponding author)
Kluge-Wilkes, A.
Huber, M.
Schmitt, R. H.

[Journal Article]
Fehlermanagement 4.0 : Effiziente Fehlerabstellung und -vermeidung mittels Künstlicher Intelligenz
In: Qualität und Zuverlässigkeit : QZ, 65 (12), 18-21, 2020

Günther, Robin (Corresponding author)
Wangerow, Kai
Schmitt, Robert H.

[Journal Article]
Mit Predictive Quality in die Zukunft sehen : Qualität 4.0 - Verborgene Data analytics Protentiale in produzierenden Unternehmen
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (10), 715-718, 2020
[DOI: 10.3139/104.112428]

Beckschulte, Sebastian
Günther, Robin (Corresponding author)
Huebser, Louis
Schmitt, Robert H.

[Journal Article]
Digitalisierung des Fehlermanagements - Ein (selbst-)lernender Ansatz für kleine und mittlere Unternehmen (KMU)
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (6), 391-393, 2020
[DOI: 10.3139/104.112279]

Günther, Robin
Schmitt, Robert H.

[Contribution to a conference proceedings, Journal Article]
Flexible Production Concept of a Low-Cost Battery Pack Housing for Electric Vehicles
In: Procedia CIRP, 2020 (93), 137-142, 2020
[DOI: 10.1016/j.procir.2020.04.038]

Schuh, Güther
Bergweiler, Georg
Fiedler, Falko
Koltermann, Marcel

[Contribution to a conference proceedings, Journal Article]
Surface Integrity Analysis of Ceramics Machined by Wire EDM Using Different Trim Cut Technologies
In: Procedia CIRP, 87, 251-256, 2020

Bergs, Thomas
Olivier, Marcel Christoph (Corresponding author)
Gommeringer, Andrea
Kern, Frank
Klink, Andreas (Corresponding author)

[Contribution to a conference proceedings, Journal Article]
Load Capacity of Rolling Contacts Manufactured by Wire EDM Turning
In: Procedia CIRP, 87, 474-479, 2020

Bergs, Thomas
Tombul, Ugur (Corresponding author)
Mevissen, Dieter
Klink, Andreas
Brimmers, Jens

[Journal Article]
Modulazione del rumore tramite modifica topografica delle superfici
In: Organi di trasmissione, 50 (9), 32-40, 2020

Kasten, Marcel-Michél (Corresponding author)
Brecher, Christian
Löpenhaus, Christoph
Lemmer, A.
Bläse, W.
et al.

[Contribution to a book, Contribution to a conference proceedings]
Reduzierung der Tonalität des Getriebegeräusches einer leichten NFZ-Starrachse
In: WZL-Seminar ''Innovationen rund ums Kegelrad'', 2020

Kasten, Marcel-Michél (Corresponding author)
Brecher, C.
Brimmers, J.
Bläse, Werner
Lemmer, Andreas
et al.

[Contribution to a conference proceedings, Journal Article]
Experimental Investigation on Process Signature for EDM Processes
In: Procedia CIRP, 87, 273-278, 2020

Bergs, Thomas
Mohammadnejad, Mehnoush
Witteler, Maximilian
Heidemanns, Lukas Franz
Klink, Andreas (Corresponding author)

[Contribution to a book]
Best of Benchmark : Grenzfallbetrachtung zwischen Fräsen und Senkerosion
In: Mehr Wissen. Mehr Neugier. WBA-Forschungsbericht 2020, 64-70, 2020

Wilms, Marcel (Corresponding author)
Heß, Dennis Raphael
Schneider, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Modellbasierte Datenanalyse als Basis fürZustandsüberwachung in Werkzeugmaschinen
In: Steel and more : ASK 34 Aachener Stahlkolloquium : 19. November 2020, Online-Konferenz, 9-18, 2020

Brecher, C.
Brockmann, M.
Biernat, Benedikt Markus Hubert (Corresponding author)
Frenkel, Nils
Neus, S.

[Contribution to a book, Contribution to a conference proceedings]
Evaluation of optimal positioning methods of integral deformation sensors for the correction of thermal errors in machine tools
In: Special Interest Group Meeting Thermal Issues: Laboratory for Machine Tools and Production Engineering (WZL) of RWTH Aachen, and Fraunhofer Institute for Production Technology IPT, DE, 26th 27th February 2020, Aachen/ Germany, 26-29, 2020

Brecher, C.
Herzog, Roland
Spierling, R. (Corresponding author)
Tzanetos, Filipos
Naumann, Amdreas

[Report]
Mikrogeometrische Schneidengestaltung von Wälzfräsern aus PM-HSS - HobPrep, 2020

Kühn, Felix
Brimmers, Jens
Bergs, Thomas

[Journal Article]
Prozesskettenoptimierung in der Fräserfertigung : Optimierung der Werkzeugfertigung durch Analyse der Randzoneneigenschaften entlang der Prozesskette
In: wt Werkstattstechnik online, 110 (11/12), 800-805, 2020
[DOI: 10.37544/1436-4980-2020-11-12-64]

Bergs, Thomas
Grünebaum, Timm Christian
Splettstößer, Antonia Maren (Corresponding author)
Beckers, Alexander
Barth, Sebastian

[Journal Article]
Erforschung dynamischer Lagerlasten in Hauptspindeln
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 115 (12), 920-923, 2020
[DOI: 10.3139/104.112418]

Brecher, Christian
Eckel, Hans-Martin (Corresponding author)
Neus, Stephan

[Journal Article]
Influence of an Additional Indexing Rotary Axis on Wire Electrical Discharge Machining Performance for the Automated Manufacture of Fir Tree Slots
In: Journal of engineering for gas turbines and power, 142 (9), 091005, 2020
[DOI: 10.1115/1.4046805]

Bergs, Thomas
Küpper, Ugur
Herrig, Tim
Klink, Andreas (Corresponding author)
Welling, David

[Contribution to a book, Contribution to a conference proceedings]
Investigations of Single Pulse Smoothing Characteristics during PECM
In: 16th International Symposium on Electrochemical Machining Technology INSECT 2020 : Scripts Precision and Microproduction Engineering, 35-40, 2020

Klink, Andreas (Corresponding author)
Rommes, B.
Heidemanns, L.
Herrig, T.

[Contribution to a book, Contribution to a conference proceedings]
Formation of Flow-Grooves during Electrochemical Machining
In: 16th International Symposium on Electrochemical Machining Technology INSECT 2020 : Scripts Precision and Microproduction Engineering, 27-32, 2020

Rommes, Bob (Corresponding author)
Klink, A.
Herrig, T.
Vorspohl, J.
Ehle, L.
et al.

[Contribution to a conference proceedings, Journal Article]
Experimental Investigation on Process Signature for EDM Processes
In: Procedia CIRP, 87, 273-278, 2020
[DOI: 10.1016/j.procir.2020.02.114]

Bergs, Thomas
Mohammadnejad, Mehnoush
Witteler, Maximilian
Heidemanns, Lukas Franz
Klink, Andreas (Corresponding author)

[Contribution to a conference proceedings, Journal Article]
Load Capacity of Rolling Contacts Manufactured by Wire EDM Turning
In: Procedia CIRP, 87, 474-479, 2020
[DOI: 10.1016/j.procir.2020.02.111]

Bergs, Thomas
Tombul, Ugur (Corresponding author)
Mevissen, Dieter
Klink, Andreas
Brimmers, Jens

[Contribution to a conference proceedings, Journal Article]
Surface Integrity Analysis of Ceramics Machined by Wire EDM Using Different Trim Cut Technologies
In: Procedia CIRP, 87, 252-256, 2020
[DOI: 10.1016/j.procir.2020.02.026]

Bergs, Thomas
Olivier, Marcel Christoph (Corresponding author)
Gommeringer, Andrea
Kern, Frank
Klink, Andreas (Corresponding author)

[Contribution to a conference proceedings, Journal Article]
Determination of residual stresses in processes with multiple thermal loads
In: Procedia CIRP, 87, 509-514, 2020
[DOI: 10.1016/j.procir.2020.02.066]

Vorspohl, Julian (Corresponding author)
Frerichs, Friedhelm
Schneider, Sebastian
Meinke, M.
Schröder, Wolfgang
et al.

[Contribution to a conference proceedings]
Measuring the kinematic behavior of spindle bearing rolling elements under radial loads
In: Bearing world : International Bearing Conference, 19-23 October, 2020 : the expert forum for bearings, focusing on rolling bearings! / FVA, 149-153, 2020

Brecher, Christian
Eckel, Hans-Martin (Corresponding author)
Fey, Marcel
Neus, Stephan

[Journal Article]
Mit datenbasierten Modellen Fräsprozesse optimieren : WZL-Forschungsergebnisse: Datengetriebene Ansätze steigern die Genauigkeit von Simulationsmodellen zum Auslegen von Fräsprozessen
In: NC-Fertigung, 41 (12), 32-33, 2020

Brecher, Christian
Wiesch, Marian (Corresponding author)
Fey, Marcel

[Journal Article]
Design of a tuned mass disc damper with variable natural frequency for chatter suppression
In: Vibroengineering procedia : VP, 2020 (34), 39-42, 2020
[DOI: 10.21595/vp.2020.21755]

Brecher, Christian
Zhao, Guifeng (Corresponding author)
Fey, Marcel

[Contribution to a conference proceedings]
Enhancing the TCP position controllability and force observability of a feed drive axis with two direct length measuring systems
In: 18th International Conference on Precision Engineering (ICPE2020), Nov. 23-27. 2020 : Kobe/Japan : Virtual Conference, C-3-12, 2020

Kehne, Sebastian (Corresponding author)
Fey, Marcel
Herfs, Werner
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Control of the static and dynamic stiffness of feed drive axes by using an external force sensor
In: Proceedings 2020 International Conference on Electrical Machines (ICEM), 23-26 Aug. 2020, Gothenburg, Sweden (Virtual conference), 2381-4802, 2020
[DOI: 10.1109/ICEM49940.2020.9271036]

Kehne, Sebastian (Corresponding author)
Fey, M.
Brecher, C.
Herfs, W.

[Contribution to a conference proceedings]
Development of an Online Identification System for System Identification of Machine Tool Dynamics
In: 18th International Conference on Precision Engineering (ICPE2020) : Nov.23-27. 2020, Kobe/Japan : Virtual Conference, C-1-4 (4 p), 4 Seiten, 2020

Fujita, Tomoya
Xi, Tiandong
Kehne, Sebastian
Fey, Marcel
Brecher, Christian

[Contribution to a conference proceedings, Journal Article]
Investigations on the Influence of the Cemented Carbide Grade on the Surface Integrity when End Milling DA 718
In: Procedia CIRP, 93, 1490-1495, 2020

Bergs, Thomas
Hardt, Marvin Yannick (Corresponding author)
Schraknepper, Daniel

[Contribution to a book, Contribution to a conference proceedings]
Transfer of a Cylindrical Rolling Force Model for Cylindrical Discs to Rolling of PM Manufactured Spur Gears
In: [EuroPM 2020 Congress - EuroPM 2020 Congress & Exhibition, EuroPM 2020, 2020-10-05 - 2020-10-07, online], 2020

Bergs, Thomas
Brimmers, Jens
Klee, Lukas (Corresponding author)
Frech, Tim

[Contribution to a conference proceedings, Journal Article]
Modelling and analysis of manufacturing tasks for combined phase-out and ramp-up production
In: Procedia CIRP, 91, 164-169, 2020

Bergs, Thomas
Apelt, Sebastian (Corresponding author)
Rey, Jan
Barth, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Metrological investigation and simulation of thermo-mechanical interactions in externally driven spindles
In: Special Interest Group: Thermal Issues : 26th-27th February 2020 ; Laboratory for Machine Tools and Production Engineering (WZL) of RWTH Aachen, Aachen, Germany, 14-17, 2020

Brecher, C.
Steinert, A. (Corresponding author)
Neus, S.
Fey, M.

[Contribution to a conference proceedings, Journal Article]
Modeling of the Fracture Behavior of CBN Grains during Single Grain Dressing using FEM
In: Procedia CIRP, 93, 1514-1519, 2020

Bergs, Thomas
Ohlert, Marius (Corresponding author)
Prinz, Sebastian
Barth, Sebastian

[Contribution to a conference proceedings, Journal Article]
Your customer’s digital shadow : Objectification of human perception by a multisensory measurement system
In: Procedia CIRP, 93, 1370-1375, 2020

Gussen, Lars Christopher Konrad (Corresponding author)
Ellerich, Max
Schmitt, Robert H.
Viktorov, Nikola

[Contribution to a conference proceedings, Journal Article]
Multi-Staged, Multi-Objective Optimization for Operation Management in Line-less Mobile Assembly Systems (LMAS)
In: Procedia CIRP, 93, 1121-1126, 2020

Buckhorst, Armin Friedrich
Schmitt, Robert H.

[Contribution to a conference proceedings, Journal Article]
Multi-Staged, Multi-Objective Optimization for Operation Management in Line-less Mobile Assembly Systems (LMAS)
In: Procedia CIRP, 93, 1121-1126, 2020
[DOI: 10.1016/j.procir.2020.04.046]

Buckhorst, Armin Friedrich (Corresponding author)
Schmitt, Robert H.

[Contribution to a book, Journal Article]
Mit "Digitalen Schatten" Daten verdichten und darstellen : Der Exzellenzcluster "Internet der Produktion" forscht über die Produktionstechnik hinaus
In: RWTH-Themen : Berichte aus der Rheinisch-Westfälischen Technischen Hochschule Aachen, 2020 (2), 18-23, 2020

Jarke, Matthias
van der Aalst, Wil M. P.
Brecher, Christian
Brockmann, Matthias
Koren, István
et al.

[Contribution to a conference proceedings, Journal Article]
Your customer’s digital shadow : Objectification of human perception by a multisensory measurement system
In: Procedia CIRP, 93, 1370-1375, 2020
[DOI: 10.1016/j.procir.2020.03.011]

Gussen, Lars Christopher Konrad (Corresponding author)
Ellerich, Max
Schmitt, Robert H.
Viktorov, Nikola

[Conference Presentation]
Einfluss des Schleifprozesses auf die Werkstückoberfläche und -randzone von WC-Co Hartmetallen
In: 11. Wernesgrüner Werkzeugsymposium Wernesgrün 2020-01-29 - 2020-01-31, 21 Folien, 2020

Bergs, Thomas
Dehmer, Alexander Moritz (Corresponding author)
Wrobel, Christian

[Contribution to a book, Contribution to a conference proceedings]
Methodology for the determination of the logic of innovation ideas for technical systems
In: 2020 IEEE Technology & Engineering Management Conference (TEMSCON) / IEEE, TEMSCON 2020, IEEE TEMS ; proceedings editor: Tugrul Daim (Portland State University, USA), 2020
[DOI: 10.1109/TEMSCON47658.2020.9140086]

Schuh, Günther
Schwarberg, Thomas (Corresponding author)
Scholz, Patrick

[Contribution to a book, Contribution to a conference proceedings]
Methodology Concept for the Determination of the Idea-specific Requirement Space for the Execution of Radical Innovations
In: 2020 IEEE Technology & Engineering Management Conference (TEMSCON) / IEEE, TEMSCON 2020, IEEE TEMS ; proceedings editor: Tugrul Daim (Portland State University, USA), 2020
[DOI: 10.1109/TEMSCON47658.2020.9140107]

Schuh, Günther (Corresponding author)
Zeller, Paul (Corresponding author)

[Journal Article]
Statische Eigenschaften von Werkzeugschnittstellen (Teil2)
In: Maschinenmarkt, 126 (19), 68-73, 2020

Brecher, C.
Bergs, Christian Siegfried (Corresponding author)
Neus, S.

[Journal Article]
Generator mit Radialkraftregelung optimiert Luftfahrttechnik
In: Maschinenmarkt, 126 (Online First), 5 p. ID:46988604, 2020

Brecher, C.
Neus, S.
Malinowski, Oscar
Gärtner, M.

[Contribution to a book, Contribution to a conference proceedings]
Entwicklung und Validierung einer ebenenbasiertenWälzschälsimulation
In: Aktuelle Entwicklungen beim Vorverzahnen, Aachen, 04./05. November 2020, 21 Folien, 2020

Jansen, Christoph (Corresponding author)
Brimmers, J. (Corresponding author)
Bergs, T.

[Contribution to a book, Contribution to a conference proceedings]
Leistungspotenziale von Zwei-Schnitt-Strategien beim Wälzfräsen
In: Aktuelle Entwicklungen beim Vorverzahnen, Aachen, 04./05. November 2020, 22 Folien, 2020

Troß, N. (Corresponding author)
Brimmers, J.
Bergs, T.

[Journal Article]
Critical incidents of outsourcing processes in pharmaceutical supply chain : a mixed-methods approach
In: Journal of Industrial Engineering and Management : JIEM, 13 (3), 495-513, 2020
[DOI: 10.3926/jiem.3085]

Marinkovic, Valentina (Corresponding author)
Heine, Ina (Corresponding author)
Milosevic Georgiev, Andrijana (Corresponding author)
Schmitt, Robert H. (Corresponding author)