[Journal Article]
Digital Lean Lighthouse Factory: Nachhaltig effiziente Produktion
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (3), 175-177, 2020
[DOI: 10.3139/104.112251]

Schuh, G.
Kozielski, Stefan
Weber, Wolfgang
Gützlaff, A.
Sauermann, Frederick Christian
et al.

[Book, Dissertation / PhD Thesis]
Transparency-driven vertikal data connection of production systems for resources monitoring in manufacturing, xvii, 174 Seiten : Illustrationen, Diagramme, 2020

Vollmer, Thomas

[Book, Dissertation / PhD Thesis]
Development of wire- and powder-based laser metal deposition process for locally modified mechanical properties of X37CrMoV5-1 tool steel, XV, 16 bis 148, A bis H Seiten : Illustrationen, Diagramme, 2020

Teli, Mahesh Pradip

[Contribution to a book, Journal Article]
A Digital Perspective on Machine Tool Calibration
In: International journal of automation technology : IJAT, 14 (3), 360-368, 2020
[DOI: 10.20965/ijat.2020.p0360]

Montavon, Benjamin Leendert
Dahlem, Jan Philipp
Peterek, Martin
Schmitt, Robert Heinrich

[Journal Article]
Multiagentensysteme in der Agilen Montage: Echtzeitfähige Ablaufplanung flexibler Operationsabfolgen
In: wt Werkstattstechnik online, 110 (4), 170-176, 2020

Burggräf, P.
Dannapfel, M.
Adlon, T.
Kahmann, Hannes
Schukat, Esben
et al.

[Journal Article]
Remote-Laserstrahlschweißen von Lasche-Schlitz-Verbindungen aus Aluminiummehrschichtblech für einkostengünstiges Batteriepackgehäuse
In: Schweissen und Schneiden, 72 (3), 127-133, 2020

Schuh, G.
Bergweiler, G.
Fiedler, F.
Krüger, Lukas

[Journal Article]
FEM as-a-Service : zwischen Tradition und Datenökonomie
In: Digital manufacturing, 13 (2), 33-35, 2020

Stanke, Joachim Patrick Thomas

[Journal Article]
Construction of small sets of reference images for feature descriptors fitting and their use in the multiclassification of parts in industry
In: The international journal of advanced manufacturing technology, 12 Seiten, 2020
[DOI: 10.1007/s00170-020-05253-6]

Fröhlich, Herberth Birck
Grozmani, Natalia
Wolfschläger, Dominik
Goncalves, Armando Albertazzi
Schmitt, Robert Heinrich

[Journal Article]
Influence of long-wave deviations on the quasi-static and dynamic excitation behavior at higher speeds
In: Applied acoustics, 165, 107307, 2020
[DOI: 10.1016/j.apacoust.2020.107307]

Ahmad, Mubarik
Brimmers, Jens
Brecher, Christian

[Journal Article]
The Influence of Material Roughness, Hardness and Lubricant Additives on Micropitting Behaviour in Rolling-Sliding Contacts
In: Tribology online, 15 (2), 98-104, 2020
[DOI: 10.2474/trol.15.98]

Ohno, Takuya
Greschert, René
Löpenhaus, Christoph
Brecher, Christian

[Journal Article]
Methodik zur numerischen Simulation des thermo-mechanischen Kontakts beim Einkorneingriff
In: Diamond business, 15 (1), 44-51, 2020

Bergs, T.
Röttger, J.
Prinz, Sebastian
Barth, Sebastian

[Journal Article]
Correction to: Development and validation of a new friction model for cutting processes
In: The international journal of advanced manufacturing technology, 107 (11/12), 4371, 2020
[DOI: 10.1007/s00170-020-05335-5]

Peng, Bingxiao
Bergs, Thomas
Schraknepper, Daniel
Smigielski, Thobias
Klocke, Fritz

[Journal Article]
Electron microscopic characterization of surface zones thermo-chemically modified by electrical discharge machining
In: Journal of materials processing technology, 2020 (280), Article 116596, 2020
[DOI: 10.1016/j.jmatprotec.2020.116596]

Ehle, L.
Schneider, Sebastian
Schwedt, A.
Richter, Silvia
Klink, Andreas
et al.

[Journal Article]
Flexibilisierung des Energiebedarfs während der Warmlauf-phase einer Hauptspindel
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (4), 234-236, 2020
[DOI: 10.3139/104.112258]

Brecher, Christian
Strachkov, Anton
Steinert, Alexander
Neus, Stephan

[Journal Article]
Strukturkrise bewältigen : Strategieentwicklung im Werkzeugbau
In: Form + Werkzeug, 28 (1), 24-25, 2020

Boos, W.
Kelzenberg, C.
Goertz, David
Busch, M.

[Journal Article]
Investigation of the independence of the best assembly orientations with respect to X-ray source parameters in industrial computed tomography
In: The e-journal of nondestructive testing & ultrasonics, 25 (2), 6 p, 2020

Grozmani, Natalia
Chupina, D.
Schmitt, R.

[Contribution to a book, Contribution to a conference proceedings]
Development of a Machine Learning Model for a Multi-Correlative Sample-Based Prediction of Product Quality for Complex Machining Processes
In: Production at the leading edge of technology - Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, 2019, Hamburg, 523-532, 2020
[DOI: 10.1007/978-3-662-60417-5_52]

Chhor, Jimmy
Gerdhenrichs, Stefan
Mohrschladt, Felix
Schmitt, R.

[Contribution to a book, Contribution to a conference proceedings]
Entwicklung eines selbstoptimierenden Prüfsystems zur Erfassung der haptischen Bedienqualität
In: Potenziale Künstlicher Intelligenz für die Qualitätswissenschaft : Bericht zur GQW-Jahrestagung 2018 in Nürnberg / Robert H. Schmitt (Hrsg.), 199-220, 2020
[DOI: 10.1007/978-3-662-60692-6_12]

Frank, D.
Schmitt, R.
Chhor, Jimmy
Ellerich, Max

[Contribution to a book, Contribution to a conference proceedings]
Blueprint for a Priming Study to Identify Customer Needs in Social Media Reviews
In: Human systems engineering and design II : proceedings of the 2nd International Conference on Human Systems Engineering and Design (IHSED2019): Future Trends and Applications, September 16-18, 2019, Universität der Bundeswehr München, Munich, Germany / Tareq Ahram, Waldemar Karwowski, Stefan Pickl, Redha Taiar, editors, 79-84, 2020
[DOI: 10.1007/978-3-030-27928-8_13]

Briele, Kristof Rene
Krause, A.
Ellerich, M.
Schmitt, R.

[Journal Article]
Condition Monitoring of Ball Screw Drives Based on Frequency Shift
In: IEEE ASME transactions on mechatronics, 24 (Online First), 8 p, 2020
[DOI: 10.1109/TMECH.2020.2969846]

Xi, Tiandong
Kehne, S.
Fujita, Tomoya
Epple, A.
Brecher, C.

[Book, Dissertation / PhD Thesis]
Gestaltungsmodell zur Steigerung der Regelbarkeit von Produktionsplanungs- und -steuerungssystemen, X, 252 Seiten : Diagramme, 2020

Wetzchewald, Philipp

[Book, Dissertation / PhD Thesis]
Integration von Lieferanten in agile Entwicklungsprozesse technischer Systeme, XVI, 292 Seiten : Diagramme, 2020

Schröder, Stephan

[Journal Article]
Model-based monitoring of temperatures and heat flows in the milling cutter
In: The international journal of advanced manufacturing technology, 107 (9/10), 4231-4238, 2020
[DOI: 10.1007/s00170-020-05237-6]

Augspurger, Thorsten
Roson da Silva, Gabriel
Schraknepper, D.
Mattfeld, Patrick-Marcel
Bergs, Thomas

[Book, Dissertation / PhD Thesis]
Komponenten industrieller, datenbasierter Dienstleistungen, XIII, 204 Seiten : Diagramme, 2020

Kolz, Dominik Matthias

[Journal Article]
Evaluation of Industry 4.0 Data formats for Digital Twin of Optical Components
In: International journal of precision engineering and manufacturing-green technology : IJPEM-GT, 2020
[DOI: 10.1007/s40684-020-00196-5]

Schmetz, Arno
Lee, Tae Hun
Hoeren, Maximilian
Berger, Marvin
Ehret, Susanne
et al.

[Journal Article]
Improved impact damage characterisation in CFRP samples using the fusion of optical lock-in thermography and optical square-pulse shearography images
In: NDT & E international, 111, 102215, 2020
[DOI: 10.1016/j.ndteint.2020.102215]

de Oliveira, Bernardo C. F.
Nienheysen, Philipp Thomas
Baldo, Crhistian R.
Gonçalves, Armando Albertazzi
Schmitt, Robert Heinrich

[Contribution to a book, Contribution to a conference proceedings]
Improved NVH Behavior Of Transmission Gears By The Use Of PM
In: Euro PM Congress & Exhibition, Euro PM2019 proceedings : 13-16 October 2019, Maastricht, The Netherlands, 6 p, 2020

Scholzen, P.
Andersson, M.
Löpenhaus, C.
Brecher, C.

[Contribution to a book, Contribution to a conference proceedings]
Investigation of the Influence of Elastic Gear Body Structures on the Operational Behavior of Gears
In: International Conference on Gears 2019, 3rd International Conference on High Performance Plastic Gears 2019, 3rd International Conference on Gear Production 2019 : Garching/Munich, Germany September 18-20, 2019, 785-796, 2020

Scholzen, P.
Billenstein, D.
Hammerl, Georg
Löpenhaus, C.
Glenk, Christian
et al.

[Contribution to a book]
Datenbasiertes Qualitätsmanagement im Internet of Production
In: Handbuch Industrie 4.0 : Recht, Technik, Gesellschaft / Walter Frenz, Hrsg., 489-516, 2019
[DOI: 10.1007/978-3-662-58474-3_25]

Schmitt, Robert Heinrich
Ellerich, Max
Schlegel, Peter
Ngo, Quoc Hao
Emonts, Dominik
et al.

[Journal Article]
Methodology for the identification of alternative manufacturing changes for safety-critical components
In: Production engineering, 2020
[DOI: 10.1007/s11740-020-00960-1]

Bergs, Thomas
Hermann, Lennard
Rey, Jan
Barth, Sebastian

[Journal Article]
SABCEMM: A Simulator for Agent-Based Computational Economic Market Models
In: Computational economics, 55 (2), 707-744, 2020
[DOI: 10.1007/s10614-019-09910-1]

Trimborn, Torsten
Otte, Philipp Joachim
Cramer, Simon
Beikirch, Maximilian
Pabich, Emma
et al.

[Journal Article]
5G-basierte Sensorik zur Überwachung der Produktion - Erprobung der 5G Mobilfunktechnologie in der Produktion auf dem 5G-Industry Campus Europe
In: Industrie 4.0 Management, 6 (1), 3 S., 2020

Schmitt, Sarah
Jung, Sven
König, Niels
Schmitt, Robert Heinrich

[Journal Article]
FactDAG: Formalizing Data Interoperability in an Internet of Production
In: IEEE internet of things journal, 2020 (Online First), 10 pp, 2020
[DOI: 10.1109/JIOT.2020.2966402]

Gleim, Lars
Pennekamp, Jan
Liebenberg, M.
Buchsbaum, Melanie Sarah Katharina
Niemietz, Philipp
et al.

[Journal Article]
Contact pressure, slip-rate, and temperature dependent friction analysis regarding damage free deep drawing of stainless steel
In: Production engineering, 14 (2), 231-238, 2020
[DOI: 10.1007/s11740-019-00940-0]

Bergs, Thomas
Trauth, Daniel
Nick, Matthias
Hild, Rafael

[Contribution to a book, Contribution to a conference proceedings]
Influencing factors for the design of agile global production networks
In: Production at the leading edge of technology - Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, 2019, Hamburg, 563-571, 2020
[DOI: 10.1007/978-3-662-60417-5_56]

Rodemann, N.
Ays, J.
Gützlaff, A.
Prote, J.
Schuh, G.

[Book, Dissertation / PhD Thesis]
Kostenprognose von Instandhaltungsleistungen parallel zur Produktentwicklung, IX, 212 Seiten : Illustrationen, Diagramme, 2020

Optehostert, Felix

[Contribution to a conference proceedings, Journal Article]
Simulation of Thermal Induced Microstructure Evolution within the Heat Affected Zone
In: Procedia CIRP, 2019 (82), 432-437, 2019
[DOI: 10.1016/j.procir.2019.04.144]

Bergs, Thomas
Mohammadnejad, Mehnoush
Heß, Raphael
Harst, Simon Christoph
Klink, Andreas

[Journal Article]
Erweiterung der digitalen Prozesskette um das thermo-elastische Maschinenverhalten: Ein modellbasierter Ansatz
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (1/2), 31-35, 2020
[DOI: 10.3139/104.112209]

Brecher, C.
Spierling, R.
Wiesch, Marian
Königs, M.
Fey, M.

[Book, Dissertation / PhD Thesis]
Übertragungsverhalten von Planetenrollengewindetrieben unterschiedlicher Gewindegangzahl der Spindel und der Mutter, VIII, 151 Seiten : Illustrationen, Diagramme, 2020

Hildebrand, Maria

[Journal Article]
Vision based pixel-level bridge structural damage detection using a link ASPP network
In: Automation in construction, 110, 102973, 2020
[DOI: 10.1016/j.autcon.2019.102973]

Deng, Wenlong
Mou, Yongli
Kashiwa, Takahiro
Escalera, Sergio
Nagai, Kohei
et al.

[Journal Article]
Quantifying disturbance risks on the process time for a robust, synchronized individual production
In: Production engineering, 8 Seiten, 2020
[DOI: 10.1007/s11740-020-00956-x]

Heutmann, Timo
Tils, Alexander
Schmitt, Robert Heinrich

[Book, Dissertation / PhD Thesis]
Planungsbasierte Generierung von Abläufen für Maschinensteuerungen, VI, 172 Seiten : Illustrationen, Diagramme, 2020

Behnen, Daniel

[Book, Dissertation / PhD Thesis]
Verschleiß der Umformwerkzeuge beim Präzionsblankpressen von Quarzglas, 115, A-I Seiten : Illustrationen, Diagramme, 2020

Dukwen, Julia

[Journal Article]
Adaptive automation assembly: Identifying system requirements for technical efficiency and worker satisfaction
In: Computers & industrial engineering, 139, 105772, 2019
[DOI: 10.1016/j.cie.2019.03.036]

Fletcher, Sarah R.
Johnson, Teegan
Adlon, Tobias
Larreina, Jon
Casla, Patricia
et al.

[Journal Article]
Jetzt das Unmögliche wagen : das Ende von Streetscooter ist ein Armutszeugnis für Deutschland
In: Aachener Nachrichten, 76 (53, 2020/03/03), 9, 2020

Schuh, Günther

[Journal Article]
Performance analysis of laser-treated hot forging dies with WC-Co-Cr
In: The international journal of advanced manufacturing technology, 106 (3/4), 1327-1336, 2019
[DOI: 10.1007/s00170-019-04710-1]

Gavalas, E.
Rossbach, A.
Feuerhack, Andreas

[Journal Article]
Automated driving for car manufacturers’ vehicle logistics
In: Automatisierungstechnik, 68 (3), 222-227, 2020
[DOI: 10.1515/auto-2019-0087]

Wenning, Marius Julian
Kawollek, Sebastian
Kampker, Achim

[Book, Dissertation / PhD Thesis]
Piezobasierte Werkzeugtechnologie zur replikativen Herstellung abbildender Mikrooptiken aus Kunststoff, IX, 162 Seiten : Illustrationen, Diagramme, 2020

Meiers, Bernd

[Book, Dissertation / PhD Thesis]
Bewertung von Prozessoptimierungsmethoden auf dem Shopfloor einer Serienmontage, VIII, 9-112, CXIII-CLIV Seiten : Illustrationen, Diagramme, 2020

Pötters, Patrick

[Journal Article]
Development and validation of a new friction model for cutting processes
In: The international journal of advanced manufacturing technology, 13 Seiten, 2020
[DOI: 10.1007/s00170-019-04709-8]

Peng, Bingxiao
Bergs, Thomas
Schraknepper, Daniel
Smigielski, Thobias
Klocke, Fritz

[Journal Article]
Laser-Based Additive Manufacturing of WC-Co with High-Temperature Powder Bed Preheating
In: Steel research international, 1900511, 2020
[DOI: 10.1002/srin.201900511]

Fries, Sofia
Genilke, Stephan
Wilms, Markus Benjamin
Seimann, Martin
Weisheit, Andreas
et al.

[Journal Article]
Modelling complex measurement processes for measurement uncertainty determination
In: International journal of quality reliability management, 2020
[DOI: 10.1108/IJQRM-07-2019-0232]

Müller, Tobias
Huber, Meike
Schmitt, Robert Heinrich

[Contribution to a book, Contribution to a conference proceedings]
Implementation of an Autonomous Tool Trolley in a Production Line
In: Advances in service and industrial robotics : proceedings of the 28th International Conference on Robotics in Alpe-Adria-Danube Region (RAAD 2019) / Karsten Berns, Daniel Görges, editors, 117-125, 2020
[DOI: 10.1007/978-3-030-19648-6_14]

Engemann, Heiko
Badri, Sriram
Wenning, Marius Julian
Kallweit, Stephan

[Journal Article]
Numerical and experimental determinations of contact heat transfer coefficients in nonisothermal glass molding
In: Journal of the American Ceramic Society, 103 (2), 1258-1269, 2019
[DOI: 10.1111/jace.16756]

Vu, Anh Tuan
Helmig, Thorsten
Vu, Anh Ngoc
Frekers, Yona Henrik
Grunwald, Tim
et al.

[Contribution to a book, Contribution to a conference proceedings]
Workpiece Coupling in Machine Tools Using Experimental-Analytical Dynamic Substructuring
In: Dynamic Substructures, Volume 4 : Proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics 2019 / edited by Andreas Linderholt, Matthew S. Allen, Randall L. Mayes, Daniel Rixen, 47-56, 2019
[DOI: 10.1007/978-3-030-12184-6_5]

Chavan, Prateek Satish
Brecher, Christian
Fey, Marcel
Loba, Matthäus

[Contribution to a book, Contribution to a conference proceedings]
Automation Configuration Evaluation in Adaptive Assembly Systems Based on Worker Satisfaction and Costs
In: Advances in Human Factors and Systems Interaction : Proceedings of the AHFE 2019 International Conference on Human Factors and Systems Interaction, July 24-28, 2019, Washington D.C., USA / edited by Isabel L. Nunes, 12-23, 2019
[DOI: 10.1007/978-3-030-20040-4_2]

Burggräf, Peter
Dannapfel, Matthias
Adlon, Tobias
Riegauf, Aaron
Schmied, Jessica

[Contribution to a book, Contribution to a conference proceedings]
Enabling Smart Workplaces by Implementing an Adaptive Software Framework
In: Advances in human factors and systems interaction : proceedings of the AHFE 2019 International Conference on Human Factors and Systems Interaction, July 24-28, 2019, Washington D.C., USA / Isabel L. Nunes, editor, 116-127, 2019
[DOI: 10.1007/978-3-030-20040-4_11]

Burggräf, Peter
Kampker, Achim
Kreisköther, Kai Denis
Adlon, Tobias
Riegauf, Aaron
et al.

[Journal Article]
Support vector regression to correct motor current of machine tool drives
In: Journal of intelligent manufacturing, 31 (3), 553-560, 2019
[DOI: 10.1007/s10845-019-01464-1]

Schwenzer, Max
Auerbach, Thomas
Miura, Kazumasa
Döbbeler, Benjamin
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Evaluating Ordering Strategies of Star Glyph Axes
In: 2019 IEEE Visualization Conference (VIS) / publisher: IEEE, 91-95, 2019
[DOI: 10.1109/VISUAL.2019.8933656]

Miller, Matthias
Zhang, Xuan
Fuchs, Johannes
Blumenschein, Michael

[Book, Dissertation / PhD Thesis]
Tribologie beim Schleifen von polykristallinem Diamant, XV, 161 Seiten : Illustrationen, Diagramme, 2019

Vits, Frederik

[Contribution to a book, Contribution to a conference proceedings]
Modeling and Optimizing Data Transfer in GPU-Accelerated Optical Coherence Tomography
In: Euro-Par 2018: Parallel Processing Workshops : Euro-Par 2018 International Workshops, Turin, Italy, August 27-28, 2018 : revised selected papers / Gabriele Mencagli, Dora B. Heras et al. (eds.), 421-433, 2018
[DOI: 10.1007/978-3-030-10549-5_33]

Schrödter, Tobias
Pallasch, David
Wienke, Sandra Juliane
Schmitt, Robert Heinrich
Müller, Matthias Stefan

[Report]
Funkenerosion für mechanisch hochbelastete Titanstrukturbauteile - Produktlebensdauer und Ausfallwahrscheinlichkeit unter den charakteristischen Einsatzbedingungen der Raumfahrt : Abschlussbericht zum Verbundprojekt : EDMTiSpace : Laufzeit des Vorhabens: 01.07.2016-30.09.2018Electrical discharge machining for mechanically highly stressed titanium structural components - product lifetime and probabillity of failure under the characteristic conditions of use for space applications (EDMTiSpace), 2019
[DOI: 10.2314/KXP:1670252299]

Klink, Andreas
Welschof, Lukas
Smeets, Gregor Gabriel
Bergs, Thomas
Funke, Matthias
et al.

[Journal Article]
Den Shopfloor richtig planen: Erfolgreiche Layoutgestaltung im Werkzeugbau
In: Form + Werkzeug, 16 (6), 32-33, 2019

Boos, W.
Kelzenberg, C.
Lange, Johan de
Boshof, Julian

[Contribution to a book, Contribution to a conference proceedings]
Technological Trends in Context of Industry 4.0 and Their Industrial Applications
In: 60th International Scientific Conference on Information Science of Riga Technical University (ITMS) : proceedings : October 10-11, 2019, Riga, Latvia / edited by: Janis Grabis, Andrejs Romanovs, Galina Kuleshova ; organized by: Riga Technical University, IEEE Latvia Section, Information Technology Institute of RTU, 6 Seiten, 2019
[DOI: 10.1109/ITMS47855.2019.8940720]

Schuh, Günther
Scholz, Patrick
Patzwald, Marc

[Contribution to a book, Contribution to a conference proceedings]
Methodology for the Design of Technology Strategies in a Volatile Business Environment
In: 60th International Scientific Conference on Information Science of Riga Technical University (ITMS) : proceedings : October 10-11, 2019, Riga, Latvia / edited by: Janis Grabis, Andrejs Romanovs, Galina Kuleshova ; organized by: Riga Technical University, IEEE Latvia Section, Information Technology Institute of RTU, 8 Seiten, 2019
[DOI: 10.1109/ITMS47855.2019.8940751]

Schuh, Günther
Patzwald, Marc
Scholz, Patrick

[Contribution to a book, Contribution to a conference proceedings]
Adaptive Prüfplanung: Die neue Richtlinie VDI/VDE 2600-3 als Leitfaden für die Industrie
In: Prüfprozesse in der industriellen Praxis 2019, 257-270, 2019

Müller, Tobias
Greipel, J.
Schmitt, R.

[Contribution to a book, Contribution to a conference proceedings]
Untersuchung der Detektierbarkeit von realen Spindellagerschäden mit Methoden nach VDI 3832aus Feldrückläufern
In: 2. VDI-Fachtagung Schwingungen 2019 : Würzburg, 05. und 06. November 2019 / VDI-Gesellschaft Produkt- und Prozessgestaltung, 355-366, 2019

Brecher, C.
Neus, S.
Christoffers, D.
Eckel, Hans-Martin

[Contribution to a book, Contribution to a conference proceedings]
Influence of initial geometric deviations on the shaping accuracy during electrochemical machining
In: International Symposium on Electrochemical Machining Technology INSECT 2019 (Proceedings of the15th INSECT 2019) : proceedings: November 14-15, 2019, 61-66, 2019

Bergs, T.
Rommes, B.
Harst, S.
Herrig, T.
Klink, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Mechanism-based classification of electrochemical machining processes
In: International Symposium on Electrochemical Machining Technology INSECT 2019 : proceedings : November 14-15, 2019, Institute of Production Engineering, Saarland University, Saarbrücken, Germany / editors: Dirk Bähre, Alexander Ernst, 166-177, 2019

Klink, Andreas
Rommes, Bob
Zander, D.
Schupp, A.
Vollertsen, Frank
et al.

[Journal Article]
ECM roughing of profiled grooves in nickel-based alloys for turbomachinery applications
In: Procedia manufacturing, 2019 (40), 22-26, 2019
[DOI: 10.1016/j.promfg.2020.02.005]

Bergs, T.
Rommes, Bob
Smeets, G.
Gmelin, Thomas
Heidemanns, L.
et al.

[Contribution to a book, Contribution to a conference proceedings]
Investigation of the potential of using surogate models in the gear design process
In: International Conference on Gears 2019, 3rd International Conference on High Performance Plastic Gears 2019, 3rd International Conference on Gear Production 2019 : Garching/Munich, Germany September 18-20, 2019, 727-739, 2019

Brimmers, J.
Willecke, Marius
Löpenhaus, C.
Brecher, C.

[Contribution to a book, Contribution to a conference proceedings]
Calculation and Allocation of Complexity Costs Using Process Data Mining
In: 2019 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2019, December 15-18, 2019, Macao, Macao, 997-1001, 2019
[DOI: 10.1109/IEEM44572.2019.8978735]

Riesener, M.
Dölle, C.
Menges, Alexander Dominic
Schuh, G.

[Contribution to a book, Contribution to a conference proceedings]
Use the Computed Tomography for the Automatic Tool Correction of the Mould Injection Process
In: 19th International Conference of the European Society for Precision Engineering and Nanotechnology (ICE 2019), 3rd- 7th June 2019, Bilbao,Spain, 4 p, 2019

Richter, Katharina
Grozmani, N.
Peterek, M.
Schmitt, R.

[Journal Article]
Data quality program management for digital shadows of products
In: Procedia CIRP, 2019 (86), 43-48, 2019
[DOI: 10.1016/j.procir.2020.01.027]

Schuh, G.
Rebentisch, Eric
Riesener, M.
Ipers, Thoben
Tönnes, C.
et al.

[Journal Article]
Modelling of devices in an adaptive and dynamic environment
In: Procedia CIRP, 2019 (86), 210-215, 2019
[DOI: 10.1016/j.procir.2020.01.046]

Brecher, C.
Pieske, Simon
Malik, Adam
Storms, S.

[Journal Article]
Methodical Data-Driven Integration Of Perceived Quality Into The Product Development Process
In: Procedia CIRP, 2019 (84), 406-411, 2019
[DOI: 10.1016/j.procir.2019.04.205]

Lindemann, Marie
Nuy, Leo
Briele, K.
Schmitt, R.

[Contribution to a book, Contribution to a conference proceedings]
Dynamic integration of manual and automated biological process skills into MES
In: 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 10-13. Sep. 2019, Zaragoza, Spain, 1069-1076, 2019
[DOI: 10.1109/ETFA.2019.8869389]

Brecher, C.
Malik, A.
Blanke, Philipp
Herfs, W.

[Contribution to a book, Contribution to a conference proceedings]
Validation of the Power Density Potential through Production-Oriented Tooth Root Optimization
In: 8th WZL Gear Conference in the USA 2019 : Gear and Transmission Research, July 26rd/ 24th 2019, Westminster, CO/ USA( Hosted by Kapp Niles), 2019

Brecher, C.
Löpenhaus, C.
Pollaschek, Jonas

[Journal Article]
Kühlschmierstoff-Forschung zur Steigerung der Produktivität
In: Industrie-Anzeiger, 141 (24), 46-47, 2019

Bergs, T.
Lakner, T.
Splettstößer, Antonia
Liu, Hui

[Contribution to a book, Contribution to a conference proceedings]
Framework for Cross-Site Learning to Enable Knowledge Transfer in Production Networks
In: 2019 7th International Engineering, Sciences and Technology Conference (IESTEC), 9-11 Oct. 2019 , Panama City/ Panama, 359-364, 2019
[DOI: 10.1109/IESTEC46403.2019.00072]

Schuh, G.
Prote, Jan Philipp
Gützlaff, A.
Thomas, Katharina

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Identifying and evaluating flexible approaches for automobile body production areas
In: E3S Web of Conferences, 95, 01007, 2019
[DOI: 10.1051/e3sconf/20199501007]

Kampker, Achim
Bergweiler, Georg
Bichler, Marian
Hansen, Jan Ole
Paulus, Tobias Christian
et al.

[Contribution to a book, Contribution to a conference proceedings]
A hybrid simulation tool to improve the energy efficiency in production environment
In: 2019 IEEE International Conference on Systems, Man and Cybernetics (SMC) / IEEE SMC 2019 - Bari ; IEEE SMC - Systems, Man and Cybernetic Society ; publisher: IEEE, 2103-2108, 2019
[DOI: 10.1109/SMC.2019.8914514]

Zhou, B.
Frye, M.
Sander, C.
Schmitt, Robert Heinrich

[Proceedings]
Tooling 2019 Conference & Exhibition$$chost and organizer: TEMA Technologie Marketing AG ; [conference chairman: Prof. Christoph Broeckmann (RWTH Aachen University, Chair and Institute for Materials Applications in Mechanical Engineering)]
In: 11th TOOLING conference & exhibition Aachen 2019-05-12 - 2019-05-16, 1 DVD-ROM : Illustrationen, 2019

Broeckmann, Christoph

[Contribution to a book, Contribution to a conference proceedings]
Einfluss der dynamischen Lastverteilung in Zahnkontakten auf das Systemverhalten
In: Dresdner Maschinenelemente Kolloquium : DMK 2019 : 26.-27. Nov. / Technische Universität Dresden ; Fakultät Maschinenwesen, Institut für Maschinenelemente und Maschinenkonstruktion, IMM ; Herausgeber: Prof. Dr.-Ing. Berthold Schlecht, 353-372, 2019

Brecher, Christian
Brimmers, Jens
Westphal, Christian

[Website]
Data-Based Traceability in Gear Manufacturing
In: VDI-Wissensforum, 2019

Solf, Mareike
Janßen, Christopher
Brimmers, Jens
Löpenhaus, Christoph
Bergs, Thomas
et al.

[Contribution to a book, Contribution to a conference proceedings]
Transfer of the tooth flank stress into an analogy test concept to provoke the damage pattern tooth flank fracture (TFF)
In: International Conference on Gears 2019, 3rd International Conference on High Performance Plastic Gears 2019, 3rd International Conference on Gear Production 2019 : Garching / Munich, Germany September 18 - 20, 2019 / VDI-Society for Product and Process Design, 25-36, 2019

Brecher, Christian
Löpenhaus, Christoph
Goergen, Fabian

[Contribution to a book, Contribution to a conference proceedings]
Consideration of Dynamic Excitation Effects in the Gear Design Process of Two-Stage Gearboxes for E-Mobility
In: 8th WZL Gear Conference in the USA 2019 : Gear and Transmission Research, July 23rd/ 24th 2019, Westminster, CO/ USA( Hosted by Kapp Niles Group), 13, 1-22, 2019

Brecher, Christian
Löpenhaus, Christoph
Schroers, Marius Gregor

[Contribution to a book, Contribution to a conference proceedings]
Effects of different electrical discharge machining strategies on the fatigue life of tool steel for molds and dies
In: Tooling 2019 Conference & Exhibition / host and organizer: TEMA Technologie Marketing AG ; [conference chairman: Prof. Christoph Broeckmann (RWTH Aachen University, Chair and Institute for Materials Applications in Mechanical Engineering)], 8 Seiten, 2019

Bergs, Thomas
Olivier, M.
Welschof, Lukas
Klink, Andreas

[Contribution to a conference proceedings]
Pulsed Laser Influence on Two-Beam Laser Metal Deposition
In: Lasers in Manufacturing 2019 : Munich ICM, Internationales Congress Center München, Germany, June 24-27, 2019 : World of Photonics Congress / WLT, LiM 2019, 2019

Bergs, Thomas
Schulz, Martin
Gipperich, Marius
Riepe, Jan
Arntz, Kristian

[Contribution to a book, Contribution to a conference proceedings]
Certification of AI-Supported Production Processes
In: Production at the leading edge of technology : proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019 / Jens Peter Wulfsberg, Wolfgang Hintze, Bernd-Arno Behrens, editors, 553-561, 2019
[DOI: 10.1007/978-3-662-60417-5_55]

Brandstätter, Tobias Claus
Krauß, Jonathan
Schmitt, Robert Heinrich

[Contribution to a conference proceedings, Journal Article]
Adaptive scheduling through machine learning-based process parameter prediction
In: MM Science journal, 2019 (November), 3060-3066, 2019
[DOI: 10.17973/MMSJ.2019_11_2019051]

Frye, Maik
Gyulai, Dávid
Bergmann, Júlia
Schmitt, Robert Heinrich

[Contribution to a conference proceedings]
Methodology for Integration of Additive Manufacturing in existing Manufacturing Process Chains
In: 18th International Manufacturing Conference in China : IMCC2019, October 9th - 11th, 2019, Shenyang, China,[Conference proceedings] / chairman Prof. Yuhou Wu (Shenyang Jianzhu University, China),organized by Shenyang University of Science and Technology, 2019

Wollbrink, Moritz
Prümmer, Marcel
Arntz, Kristian
Bergs, Thomas

[Book]
Erfolgreich Digitale Fräsprozessketten Umsetzen : im Werkzeugbau, 35 Seiten : Illustrationen, 2019

Boos, Wolfgang
Arntz, Kristian
Degen, Florian
Wollbrink, Moritz
Gerretz, Vincent
et al.

[Contribution to a book, Contribution to a conference proceedings]
Simulative and Experimental Determination of the Tooth Flank Fracture Load Capacity of Large Modulus Gears
In: 8th WZL Gear Conference in the USA 2019 : Gear and Transmission Research, July 23rd/ 24th 2019, Westminster, CO/ USA( Hosted by Kapp Niles Group), 1-20, 2019

Brecher, Christian
Löpenhaus, Christoph
Goergen, Fabian

[Contribution to a book, Contribution to a conference proceedings]
Data-driven Prediction of Surface Quality in Fused Deposition Modeling using Machine Learning - Datengetriebene Prädiktion der Oberflächenqualität beim Fused Deposition Modeling mittels Machine Learning
In: Production at the leading edge of technology : proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019 / Jens Peter Wulfsberg, Wolfgang Hintze, Bernd-Arno Behrens, editors, 473-481, 2019
[DOI: 10.1007/978-3-662-60417-5_47]

Sohnius, Felix
Schlegel, Peter
Ellerich, Max
Schmitt, Robert Heinrich

[Contribution to a book, Contribution to a conference proceedings]
Assessing data suitability for defect prediction
In: Proceedings of the 22nd QMOD : International Conference on Quality and Service Sciences 2019, 13-15 October 2019, Krakow/Poland, 10 Seiten, 2019

Schlegel, Peter
Buschmann, Daniel
Ellerich, Max
Schmitt, Robert Heinrich

[Journal Article]
Effizienzsteigerung der Serienproduktion durch vorausschauende Werkzeugwartung
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (12), 880-883, 2019
[DOI: 10.3139/104.112213]

Schuh, Günther
Kelzenberg, Christoph Maximilian Bernd
de Lange, Johan
Busch, Max

[Book]
Urbane Produktion erfahren und erleben : Die Ergebnisse in zwei Demonstratoren, 19 Seiten : Illustrationen, 2019

Otte, Thomas
Uelpenich, Jérôme

[Contribution to a book, Contribution to a conference proceedings]
Concept for Organizational Structures of Agile Development Networks
In: Production at the leading edge of technology : proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019 / Jens Peter Wulfsberg, Wolfgang Hintze, Bernd-Arno Behrens, editors, 653-662, 2019
[DOI: 10.1007/978-3-662-60417-5_65]

Kuhn, Maximilian
Dölle, Christian
Riesener, Michael
Schuh, Günther

[Journal Article]
Ansatz zur numerischen Modellierung des Bruchverhaltens von CBN beim Einkornabrichten
In: Diamond business, 17 (4), 70-77, 2019

Bergs, Thomas
Ohlert, Marius
Lachenmaier, Maximilian
Barth, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Internet of Production : Rethinking production management
In: Production at the leading edge of technology : proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019 / Jens Peter Wulfsberg, Wolfgang Hintze, Bernd-Arno Behrens, editors, 533-542, 2019
[DOI: 10.1007/978-3-662-60417-5_53]

Schuh, Günther
Prote, Jan-Philipp
Gützlaff, Andreas
Thomas, Katharina
Sauermann, Frederick Christian
et al.

[Contribution to a conference proceedings, Journal Article]
A model for dependency-oriented prototyping in the agile development of complex technical systems
In: Procedia CIRP, 84, 1023-1028, 2019

Riesener, Michael
Rebentisch, Eric
Dölle, Christian
Schlößer, Elmar Sebastian
Kuhn, Maximilian
et al.

[Journal Article]
Eine Alternative zu klassischen Methoden : Messunsicherheitsbestimmung komplexer Messprozesse mittels Machine Learning
In: Qualität und Zuverlässigkeit : QZ, 64 (12), 50-53, 2019

Müller, Tobias
Schmitt, Robert Heinrich

[Contribution to a conference proceedings, Journal Article]
A model for dependency-oriented prototyping in the agile development of complex technical systems
In: Procedia CIRP, 84, 1023-1028, 2019
[DOI: 10.1016/j.procir.2019.04.196]

Riesener, Michael
Rebentisch, Eric
Dölle, Christian
Schlößer, Elmar Sebastian
Kuhn, Maximilian
et al.

[Contribution to a book, Contribution to a conference proceedings]
Methodology for the risk and reward evaluation of industrial subscription models
In: Production at the leading edge of technology : Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019 / edited by Jens Peter Wulfsberg, Wolfgang Hintze, Bernd-Arno Behrens, 613-622, 2019
[DOI: 10.1007/978-3-662-60417-5_61]

Ebi, Manuel
Hille, Marius
Dölle, Christian
Riesener, Michael
Schuh, Günther

[Contribution to a book]
Maschinen- und Anlagenbau
In: Energieflexibilität in der deutschen Industrie : Ergebnisse aus dem Kopernikus-Projekt - Synchronisierte und energieadaptive Produktionstechnik zur flexiblen Ausrichtung von Industrieprozessen auf eine fluktuierende Energieversorgung (SynErgie) / Alexander Sauer, Eberhard Abele, Hans Ulrich Buhl, 644-675, 2019

Putz, Mathias
Böhme, Jeanette
Büttner, Thomas
Gentzen, Jens
Münnich, Marc
et al.

[Contribution to a book, Contribution to a conference proceedings]
An Industry 4.0 Engineering Workflow Approach : From Product Catalogs to Product Instances
In: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society : Convention Center, Lisbon, Portugal, 14-17 October, 2019 : proceedings / organized by Universidade Nova de Lisboa ; sponsored by IEEE, IEEE Industrial Electronics Society (IES), 2922-2927, 2019
[DOI: 10.1109/IECON.2019.8926979]

Fimmers, Christian
Wein, Stephan
Storms, Simon
Brecher, Christian
Deppe, Torben Heinz
et al.

[Contribution to a book, Contribution to a conference proceedings]
Look-Ahead to Minimize Energy Costs of CNC Milling Machines for a Volatile Energy Price
In: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society : Convention Center, Lisbon, Portugal, 14-17 October, 2019 : proceedings / organized by Universidade Nova de Lisboa ; sponsored by IEEE, IEEE Industrial Electronics Society (IES), 436-461, 2019
[DOI: 10.1109/IECON.2019.8927142]

Kehne, Sebastian
Fimmers, Christian
Gründel, Lukas
Zender, Felix
Epple, Alexander
et al.

[Contribution to a book, Contribution to a conference proceedings]
Automatic Identification of Disturbance Force Model for Feed Drive Systems of Machine Tools
In: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society : Convention Center, Lisbon, Portugal, 14-17 October, 2019 : proceedings / organized by Universidade Nova de Lisboa ; sponsored by IEEE, IEEE Industrial Electronics Society (IES), 618-623, 2019
[DOI: 10.1109/IECON.2019.8927433]

Fujita, Tomoya
Xi, Tiandong
Berners, Thomas Bernhard
Kehne, Sebastian
Sato, Goh
et al.

[Contribution to a book, Contribution to a conference proceedings]
Simulative analysis of synchronous reluctance machines for feed drives
In: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society : Convention Center, Lisbon, Portugal, 14-17 October, 2019 : proceedings / organized by Universidade Nova de Lisboa ; sponsored by IEEE, IEEE Industrial Electronics Society (IES), 1351-1356, 2019
[DOI: 10.1109/IECON.2019.8926878]

Xi, Tiandog
Kehne, Sebastian
Epple, Alexander
Brecher, Christian

[Contribution to a conference proceedings]
Profilschleifen : Herausforderung durch Zusetzung und Potenziale durch Reinigung
In: Feinbearbeitung von Zahnrädern, Seminar 05.-06. November 2019, Aachen / WZLforum an der RWTH Aachen, 1-19, 2019

Bergs, Thomas
Brimmers, Jens
Schrank, Maximilian Günter
Solf, Mareike

[Contribution to a book, Contribution to a conference proceedings]
Einfluss der Dehnrate im Zahnfuß auf die Tragfähigkeit bei Hochdrehzahlanwendungen
In: Dresdner Maschinenelemente Kolloquium : DMK 2019 : 26. und 27. November 2019 / Technische Universität Dresden ; Fakultät Maschinenwesen, Institut für Maschinenelemente und Maschinenkonstruktion, IMM ; Herausgeber: Prof. Dr.-Ing. Berthold Schlecht, 321-340, 2019

Brecher, Christian
Brimmers, Jens
Trippe, Moritz Johannes

[Journal Article]
Methodik zur Bestimmung von Starting Solutions im B2B-Kontext
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (11), 737-739, 2019
[DOI: 10.3139/104.112182]

Schuh, Günther
Wentzel, Daniel
Dölle, Christian
Dickmann, Phillip
Mendl-Heinisch, Michael

[Journal Article]
Einfluss des Bauteilverzugs auf Form- und Lagetoleranzen : Anwendung eines neuartigen Ansatzes zur Berücksichtigung des Bauteilverzugs infolge von Einspannkräften bei Materialabtragssimulationen mithilfe von FE-Software
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (11), 753-756, 2019
[DOI: 10.3139/104.112181]

Brecher, Christian
Fey, Marcel
Loba, Matthäus

[Journal Article]
Merkmalsbasierte Qualitätsprädiktion durch maschinelles Lernen : Anwendung künstlicher neuronaler Netze zur prozessparallelen virtuellen Prüfung von Qualitätsmerkmalen anhand maschineninterner Daten
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (11), 784-787, 2019
[DOI: 10.3139/104.112177]

Brecher, Christian
Ochel, Janis
Lohrmann, Vincent
Fey, Marcel

[Abstract, Contribution to a conference proceedings]
Towards Flexible Automotive Assembly Structures in Agile Production Environments
In: 1. Stuttgarter Tagung zur Zukunft der Automobilproduktion : book of abstracts : 26. September 2019 / Fraunhofer IPA, Universität Stuttgart, Institut für Fördertechnik und Logistik, ARENA2036 ; die Herausgeber Manuel Fechter, David Korte, Dr. Jürgen Henke, 16-17, 2019

Burggräf, Peter
Dannapfel, Matthias
Adlon, Tobias
Kahmann, Hannes

[Contribution to a book, Contribution to a conference proceedings]
Development of a Framework for the Systematic Identification of AI Application Patterns in the Manufacturing Industry
In: Technology management in the world of intelligent systems : proceedings : PICMET '19 : Portland International Conference on Management of Engineering and Technology, 2019
[DOI: 10.23919/PICMET.2019.8893900]

Schuh, Günther
Scholz, Paul

[Contribution to a book, Contribution to a conference proceedings]
Resilient Technology Strategy in Volatile Environments: Derivation of Requirements to Enable Long-Term Strategic Positioning in Times of Volatility, Uncertainty, Complexity and Ambiguity
In: Technology management in the world of intelligent systems : proceedings : PICMET '19 : Portland International Conference on Management of Engineering and Technology, 15 Seiten, 2019
[DOI: 10.23919/PICMET.2019.8893922]

Schuh, Günther
Patzwald, Marc
Imhäuser Cardoso, Maria Cristina

[Contribution to a book, Contribution to a conference proceedings]
Determination of Radical Innovation Types
In: Technology management in the world of intelligent systems : proceedings : PICMET '19 : Portland International Conference on Management of Engineering and Technology, 13 Seiten, 2019
[DOI: 10.23919/PICMET.2019.8893971]

Schuh, Günther
Zeller, Paul
Steinmetz, Philipp

[Contribution to a book, Contribution to a conference proceedings]
Implementing Neural Networks Within Portfolio Management to Support Decision-Making Processes
In: Technology management in the world of intelligent systems : proceedings : PICMET '19 : Portland International Conference on Management of Engineering and Technology, 7 Seiten, 2019
[DOI: 10.23919/PICMET.2019.8893760]

Riesener, Michael
Dölle, Christian
Schuh, Günther
Zhang, Wenjia
Jank, Merle-Hendrikje

[Contribution to a book, Contribution to a conference proceedings]
Literature Based Derivation of a Framework to Evaluate Engineering Change Requests
In: Technology management in the world of intelligent systems : proceedings : PICMET '19 : Portland International Conference on Management of Engineering and Technology /, 2019
[DOI: 10.23919/PICMET.2019.8893906]

Riesener, Michael
Dölle, Christian
Mendl-Heinisch, Michael
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
Prototype Design in Agile Product Development Processes for Technical Systems
In: ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, August 18-21, 2019, Anaheim, California, USA. - Volume 7: 31st International Conference on Design Theory and Methodology, V007T06A001, 14 Seiten, 2019
[DOI: 10.1115/DETC2019-97008]

Riesener, Michael
Dölle, Christian
Schlößer, Elmar Sebastian
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
Quality Improvement of Milling Processes Using Machine Learning-Algorithms
In: 16th IMEKO TC10 Conference on Testing, Diagnostics and Inspection 2019 : Testing, Diagnostics and Inspection as a Comprehensive Value Chain for Quality and Safety : Berlin, Germany, 3-4 September 2019, 142-147, 2019

Frye, Maik
Schmitt, Robert Heinrich

[Contribution to a conference proceedings, Journal Article]
Concepts for Advancing the Use of Process Data in Electrical Discharge Machining
In: Procedia CIRP, 82, 220-223, 2019

Holsten, Maximilian Alexander
Klink, Andreas
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Numerical simulation and validation of material loadings during electrical discharge machining
In: Procedia CIRP, 82, 14-19, 2019

Bergs, Thomas
Schneider, Sebastian
Harst, Simon Christoph
Klink, Andreas

[Contribution to a conference proceedings, Journal Article]
A hybrid approach using machine learning to predict the cutting forces under consideration of the tool wear
In: Procedia CIRP, 82, 302-307, 2019

Peng, Bingxiao
Bergs, Thomas
Schraknepper, Daniel
Klocke, Fritz
Döbbeler, Benjamin

[Journal Article]
BabyLux device: a diffuse optical system integrating diffuse correlation spectroscopy and time-resolved near-infrared spectroscopy for the neuromonitoring of the premature newborn brain
In: Neurophotonics, 6 (02), 025007, 2019
[DOI: 10.1117/1.NPh.6.2.025007]

Giovannella, Martina
Contini, Davide
Pagliazzi, Marco
Pifferi, Antonio
Spinelli, Lorenzo
et al.

[Journal Article]
Digitaler Produktionszwilling im industriellen Werkzeugbau : Optimierung des Change Request Managements mithilfe des digitalen Produktionszwillings im Werkzeugbau
In: wt Werkstattstechnik online, 109 (9), 667-673, 2019

Schuh, Günther
Kelzenberg, Christoph Maximilian Bernd
Wiese, Jan-Hendrik
Kessler, Niklas

[Contribution to a book, Contribution to a conference proceedings]
Synchronization of Scrum and Stage-Gate in Hybrid Product Development Projects of Manufacturing Companies
In: Production at the leading edge of technology : proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019 / Jens Peter Wulfsberg, Wolfgang Hintze, Bernd-Arno Behrens, editors, 421-430, 2019
[DOI: 10.1007/978-3-662-60417-5_42]

Krug, Marius
Ays, Laura Johanna
Sauermann, Frederick Christian
Prote, Jan-Philipp
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
Control loop for a databased prediction of order-specific transition times
In: Production at the leading edge of technology : proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019 / Jens Peter Wulfsberg, Wolfgang Hintze, Bernd-Arno Behrens, editors, 463-472, 2019
[DOI: 10.1007/978-3-662-60417-5_46]

Sauermann, Frederick Christian
Hagemann, Marcel
Prote, Jan-Philipp
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
Tooth Root Testing of Steels with High Cleanliness
In: Fall Technical Meeting AGMA 2019, 14.10.2019 - 16.10.2019, Detroit/ USA, 13-1-13-15, 2019

Trippe, Moritz Johannes
Löpenhaus, C.
Brecher, C.
Kamjou, Lily
Löthman, Elias

[Contribution to a conference proceedings, Journal Article]
A hybrid approach using machine learning to predict the cutting forces under consideration of the tool wear
In: Procedia CIRP, 82, 302-307, 2019
[DOI: 10.1016/j.procir.2019.04.031]

Peng, Bingxiao
Bergs, Thomas
Schraknepper, Daniel
Klocke, Fritz
Döbbeler, Benjamin

[Contribution to a book, Contribution to a conference proceedings]
Reduction of the Tonality of Gear Noise by Application of Topography Scattering for Ground Bevel Gears
In: AGMA Fall Technical Meeting 2019, 19FTM09, 2019

Kasten, Marcel-Michél
Brecher, Christian
Löpenhaus, Christoph
Lemmer, Andreas
Bläse, Werner
et al.

[Contribution to a book, Contribution to a conference proceedings]
Experimentell-analytische Substrukturkopplung zur Ankopplung von Werkstücken
In: 2. VDI-Fachtagung Schwingungen 2019 : Würzburg, 05. und 06. November / VDI-Gesellschaft Produkt- und Prozessgestaltung, 229-240, 2019

Brecher, Christian
Chavan, Prateek Satish
Fey, Marcel

[Contribution to a book]
Kinetische Stromspeicher in Kombination mit Netzersatz- und USV-Anlagen
In: Energieflexibilität in der deutschen Industrie : Ergebnisse aus dem Kopernikus-Projekt : Synchronisierte und energieadaptive Produktionstechnik zur flexiblen Ausrichtung von Industrieprozessen auf eine fluktuierende Energieversorgung (SynErgie) / Alexander Sauer, Eberhard Abele, Hans Ulrich Buhl, 360-364, 2019

Kehne, Sebastian
Epple, Alexander
Brecher, Christian

[Journal Article]
Der Komplexität begegnen : Unternehmensmanagement erfolgreich meistern mit Business Analytics
In: Industrie-Anzeiger, 141 (25), 28-29, 2019

Rudolf, Stefan
Kuhn, Maximilian
Lauf, Hendrik

[Report]
Projektatlas Kompetenz Montage : kollaborativ und wandlungsfähig, 252 Seiten : Illustrationen, 2019
[DOI: 10.2314/KXP:1685929982]

Hees, Frank
Müller-Abdelrazeq, Sarah Luisa
Langer, Tristan Julian
Voss, Michael
Schmitt, Robert Heinrich
et al.

[Abstract, Contribution to a conference proceedings]
Frei verkettete Montage von Elektrofahrzeugen : Ein Ausblick
In: 1. Stuttgarter Tagung zur Zukunft der Automobilproduktion : book of abstracts : 26. September 2019 / Fraunhofer IPA, Universität Stuttgart, Institut für Fördertechnik und Logistik, ARENA2036 ; die Herausgeber Manuel Fechter, David Korte, Dr. Jürgen Henke, 22-23, 2019

Göppert, Mirko Robin Amon
Grunert, Dennis
Hüttemann, Guido
Schmitt, Robert Heinrich

[Journal Article]
Planung und Steuerung von frei verketteten Montagesystemen : Zuordnung von Aufträgen zu Montageressourcen in der Planung und im Betrieb
In: wt Werkstattstechnik online, 109 (9), 618-621, 2019

Göppert, Mirko Robin Amon
Lettmann, Pascal
Jung, Sven
Grunert, Dennis
Hüttemann, Guido
et al.

[Contribution to a book]
Leit- und Informationssysteme für die frei verkettete Montage
In: Projektatlas Kompetenz Montage : kollaborativ und wandlungsfähig / Herausgeber Dr. Frank Hees, RWTH Aachen University, Lehrstuhl für Informationsmanagement im Maschinenbau / ARIZ; Sarah Müller-Abdelrazeq, RWTH Aachen University, Lehrstuhl für Informationsmanagement im Maschinenbau / ARIZ; Tristan Langer, RWTH Aachen University, Lehrstuhl für Informationsmanagement im Maschinenbau / ARIZ; Michael Voss, Festo AG / ARIZ; Prof. Dr. Robert H. Schmitt, RWTH Aachen University, Werkzeugmaschinenlabor WZL, Lehrstuhl für Fertigungsmesstechnik und Qualitätsmanagement / freeMoVe; Guido Hüttemann, RWTH Aachen University, Werkzeugmaschinenlabor WZL, Lehrstuhl für Fertigungsmesstechnik und Qualitätsmanagement / freeMoVe [und 25 andere], 50-53, 2019

Batton, Thomas
Gayer, Christian
Möhrmann, Uli
Grunert, Dennis
Jung, Sven
et al.

[Contribution to a book]
Die Organisationsform der frei verketteten Montage
In: Projektatlas Kompetenz Montage : kollaborativ und wandlungsfähig / Herausgeber Dr. Frank Hees, RWTH Aachen University, Lehrstuhl für Informationsmanagement im Maschinenbau / ARIZ; Sarah Müller-Abdelrazeq, RWTH Aachen University, Lehrstuhl für Informationsmanagement im Maschinenbau / ARIZ; Tristan Langer, RWTH Aachen University, Lehrstuhl für Informationsmanagement im Maschinenbau / ARIZ; Michael Voss, Festo AG / ARIZ; Prof. Dr. Robert H. Schmitt, RWTH Aachen University, Werkzeugmaschinenlabor WZL, Lehrstuhl für Fertigungsmesstechnik und Qualitätsmanagement / freeMoVe; Guido Hüttemann, RWTH Aachen University, Werkzeugmaschinenlabor WZL, Lehrstuhl für Fertigungsmesstechnik und Qualitätsmanagement / freeMoVe [und 25 andere], 26-28, 2019

Hüttemann, Guido
Göppert, Mirko Robin Amon
Grunert, Dennis
Jung, Sven
Rook-Weiler, Kerstin
et al.

[Journal Article]
Statische Eigenschaften von HSK-A 100, SK-A 50 und PSC 100
In: Maschinenmarkt : MM ; das Industriemagazin, 125 (21), 40-45, 2019

Brecher, Christian
Bergs, Christian Siegfried
Fey, Marcel

[Contribution to a conference proceedings, Journal Article]
Numerical simulation and validation of material loadings during electrical discharge machining
In: Procedia CIRP, 82, 14-19, 2019
[DOI: 10.1016/j.procir.2019.04.165]

Bergs, Thomas
Schneider, Sebastian
Harst, Simon Christoph
Klink, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Integrated Process for Optimized Planning of Migration in Production Networks
In: Production at the leading edge of technology : proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019 / Jens Peter Wulfsberg, Wolfgang Hintze, Bernd-Arno Behrens, editors, 633-641, 2019
[DOI: 10.1007/978-3-662-60417-5_63]

Maibaum, Judith
Cremer, Sven Alexander
Prote, Jan-Philipp
Schuh, Günther

[Journal Article]
Implementierung eines energieflexiblen Optimierungsmodells
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (9), 573-575, 2019
[DOI: 10.3139/104.112154]

Schuh, Günther
Prote, Jan-Philipp
Sauermann, Frederick Christian
Maibaum, Judith
Neumann, Henning

[Journal Article]
On the combination of topology optimization and multiple mass dampers
In: Vibroengineering procedia : VP, 2019 (27), 13-18, 2019
[DOI: 10.21595/vp.2019.21022]

Brecher, Christian
Zhao, Guifeng
Fey, Marcel

[Journal Article]
Agile Montage : Montageplanung und -system als integrale Bestandteile der Fabrikplanung
In: wt Werkstattstechnik online, 109 (9), 622-627, 2019

Burggräf, Peter
Dannapfel, Matthias
Adlon, Tobias
Riegauf, Aaron
Müller, Katharina Maria
et al.

[Journal Article]
Auf dem Weg zum "smarten" Ökosystem : Ein gedanklicher Ordnungsrahmen für den Mittelstand aus Sicht der Produktionsautomatisierung
In: wt Werkstattstechnik online, 109 (9), 674-678, 2019

Brecher, Christian
Schilling, Katrin Laura
Storms, Simon

[Journal Article]
Vorrichtungslose Montage von Karosseriebauteilen : Virtuelle Montage für flexible Fügeprozesse im automobilen Prototypenbau mittels Laserradar
In: wt Werkstattstechnik online, 109 (9), 628-633, 2019

Nicksch, Christoph
Buckhorst, Armin
Meyer, Wolfgang
Baryliszyn, Pawel
Schmitt, Robert Heinrich

[Contribution to a conference proceedings, Journal Article]
Concepts for Advancing the Use of Process Data in Electrical Discharge Machining
In: Procedia CIRP, 82, 220-223, 2019
[DOI: 10.1016/j.procir.2019.03.279]

Holsten, Maximilian Alexander
Klink, Andreas
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Data Structure of the Digital Shadow for Systematic Knowledge Management Systems in Single and Small Batch Production
In: Procedia CIRP, 2019 (84), 1094-1100, 2019
[DOI: 10.1016/j.procir.2019.04.210]

Schuh, Günther
Kelzenberg, Christoph Maximilian Bernd
Wiese, Jan-Hendrik
Ochel, Tim

[Contribution to a conference proceedings, Journal Article]
Design model for the cost calculation of product-service systems in single and small series production
In: Procedia CIRP, 2019 (84), 296-301, 2019
[DOI: 10.1016/j.procir.2019.04.216]

Schuh, G.
Kelzenberg, C.
Wiese, Jan-Hendrik

[Journal Article]
Production Analytics : Produktionsdaten anwendergerecht auswerten
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (9), 588-591, 2019
[DOI: 10.3139/104.112153]

Schuh, Günther
Prote, Jan-Philipp
Sauermann, Frederick Christian
Schmitz, Seth

[Journal Article]
Additiv hergestellter Messerkopf mit verbesserter Kühlschmierstoffzufuhr
In: Unter Span, 19 (1), 25, 2019

Bergs, Thomas
Döbbeler, B.
Lakner, Thomas

[Book, Proceedings]
6. Aachener Kühlschmierstoff-Tagung : 23.-24. Oktober 2019
In: 6. Aachener Kühlschmierstoff-Tagung Aachen 2019-10-23 - 2019-10-24, IX, 271 Seiten : Illustrationen, Diagramme, 2019

Bergs, Thomas
Schraknepper, Daniel

[Contribution to a book, Contribution to a conference proceedings]
Discretization of the contact conditions considering the grain engagement for generating gear grinding
In: International Conference on Gears 2019, 3rd International Conference on High Performance Plastic Gears 2019, 3rd International Conference on Gear Production 2019 : Garching / Munich, Germany September 18 - 20, 2019 / VDI-Society for Product and Process Design, 1739-1748, 2019

de Oliveira Teixeira, Patricia
Löpenhaus, Christoph
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Approach for modeling elasticity in the gear honing process
In: International Conference on Gears 2019, 3rd International Conference on High Performance Plastic Gears 2019, 3rd International Conference on Gear Production 2019 : Garching / Munich, Germany September 18 - 20, 2019 / VDI-Society for Product and Process Design, 1697-7106, 2019

Schrank, Maximilian Günter
Kiesewetter-Marko, Caroline
Löpenhaus, Christoph
Epple, Alexander
Bergs, Thomas
et al.

[Contribution to a book, Contribution to a conference proceedings]
Influence of elastic effects on the grinding force in plunging bevel gear grinding
In: International Conference on Gears 2019, 3rd International Conference on High Performance Plastic Gears 2019, 3rd International Conference on Gear Production 2019 : Garching / Munich, Germany September 18 - 20, 2019 / VDI-Society for Product and Process Design, 1687-1696, 2019

Solf, Mareike
Löpenhaus, C.
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Microstructure-based approach to predict the machinability of the ferritic-pearlitic steel C60 by cutting operations
In: Procedia CIRP, 82, 107-112, 2019
[DOI: 10.1016/j.procir.2019.04.013]

Abouridouane, Mustapha
Laschet, Gottfried
Kripak, Viktor
Dierdorf, Jens
Prahl, Ulrich
et al.

[Journal Article]
Entwicklungen bei der Schleifbearbeitung von Hartmetallen : Einsatzverhalten von sintermetallisch gebundenen Diamantschleifscheiben bei der Schleifbearbeitung verschiedener WC-Co Hartmetallspezifikationen
In: Diamond business, 17 (70), 12-19, 2019

Bergs, Thomas
Dehmer, Alexander Moritz
Barth, Sebastian

[Poster]
Plattformunabhängige NC-Kernerweiterung mit MATLAB\Simulink
In: MATLAB EXPO 2019 Deutschland München 2019-07-02 - 2019-07-02, 1 Seite, 2019

Brecher, Christian
Wetzel, Arndt
Epple, Alexander

[Contribution to a book, Contribution to a conference proceedings]
Anwendung von Verfahren des maschinellen Lernens auf Basis von Data Farming am Beispiel eines Clusteralgorithmus
In: ASIM 2019 : Simulation in Produktion und Logistik / Matthias Putz & Andreas Schlegel (Hrsg.), 29-37, 2019

Schuh, Günther
Prote, Jan-Philipp
Hünnekes, Philipp
Sauermann, Frederick Christian
Müller, Christiane
et al.

[Journal Article]
Human Machine Cooperation in Smart Production : Evaluation of the Organizational Readiness
In: International journal of mechanical engineering and robotics research : IJMERR, 8 (2), 327-332, 2019
[DOI: 10.18178/ijmerr.8.2.327-332]

Dannapfel, Matthias
Wissing, Tobias
Förstmann, Ruben
Burggräf, P.

[Journal Article]
Einheitliche Werkzeugschnittstelle für Revolverdrehmaschinen : PTI - abschließende Untersuchung der einheitlichen Antriebskupplung
In: Drehteil + Drehmaschine, 31 (5), 54-57, 2019

Brecher, Christian
Bergs, Christian Siegfried
Fey, Marcel

[Journal Article]
Topology optimization for vibrating structures with the BESO method
In: Vibroengineering procedia : VP, 23, 1-6, 2019
[DOI: 10.21595/vp.2019.20673]

Brecher, Christian
Zhao, Guifeng
Fey, Marcel

[Contribution to a book, Contribution to a conference proceedings]
Improving the Absolute Accuracy of Industrial Robots
In: 2018 3rd International Conference on Reliability Engineering : 24-26 November 2018, Barcelona, Spain / conference general chair: Prof. Michael Pecht, University of Maryland, USA; Prof. Enrico Zio, Politecnico di Milano, Italy, 88-99, 2019
[DOI: 10.1088/1757-899X/575/1/012013]

Patel, Darpan
Lienenlüke, Lars
Storms, Simon
Brecher, Christian
Wied, Johannes

[Contribution to a book, Contribution to a conference proceedings]
Approaches and methodologies for process development of thin glass forming
In: Optifab 2019 : 14-17 October 2019, Rochester, New York, United States / Blair L. Unger, Jessica DeGroote Nelson (editors) ; sponsored by: SPIE ; cosponsored by: the American Precision Optics Manufacturers Association (United States), 111751V, 2019
[DOI: 10.1117/12.2536431]

Vogel, Paul-Alexander
Vu, Anh Tuan
Mende, Hendrik
Grunwald, Tim
Bergs, Thomas
et al.

[Contribution to a book, Contribution to a conference proceedings]
Molded anti-reflective structures of chalcogenide glasses for infrared optics by precision glass molding
In: Optifab 2019 : 14-17 October 2019, Rochester, New York, United States / Blair L. Unger, Jessica DeGroote Nelson (editors) ; sponsored by: SPIE ; cosponsored by: the American Precision Optics Manufacturers Association (United States), 111751U, 2019
[DOI: 10.1117/12.2536548]

Vu, Anh Tuan
Rojacher, Cornelia
Grunwald, Tim
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Performance-driven and company goal-orientated design of product portfolios : A methodological framework
In: Procedia CIRP, 84, 725-730, 2019
[DOI: 10.1016/j.procir.2019.03.267]

Riesener, Michael
Dölle, Christian
Schuh, Günther
Lauf, Hendrik
Jank, Merle-Hendrikje

[Contribution to a conference proceedings, Journal Article]
Information requirements for a data-based analysis of product and service complexity
In: Procedia CIRP, 83, 279-284, 2019
[DOI: 10.1016/j.procir.2019.04.079]

Riesener, Michael
Dölle, Christian
Koch, Jan Felix
Schuh, Günther

[Contribution to a conference proceedings, Journal Article]
Investigation of the Solubility of Liquid CO2 and Liquid Oil to Realize an Internal Single Channel Supply in Milling of Ti6Al4V
In: Procedia manufacturing, 33, 200-207, 2019
[DOI: 10.1016/j.promfg.2019.04.024]

Bergs, Thomas
Pusavec, Franci
Koch, Norbert Matthias
Grguras, Damir
Döbbeler, Benjamin
et al.

[Journal Article]
Verschmutzungsuntersuchungen an Kugelgewindetrieben
In: Ingenieur-Spiegel : Fachmagazin für Ingenieure / [Hellblaue Ausgabe], 12 (3), 46-48, 2019

Brecher, Christian
Biernat, Benedikt
Frenken, Thomas
Fey, Marcel

[Contribution to a book, Contribution to a conference proceedings]
Scattered Gear Modifications : A New Era in Gear Technology?
In: 8th WZL Gear Conference in the USA 2019 : Gear and Transmission Research, July 26rd/ 24th 2019, Westminster, CO/ USA( Hosted by Kapp Niles), 7, 1-9, 2019

Brecher, Christian
Bergs, Thomas
Löpenhaus, Christoph
Kasten, Marcel-Michél
Janßen, C.

[Contribution to a book, Contribution to a conference proceedings]
Characteristic Value-Based Process Design of Gear Hobbing Processes with Radial Infeed
In: 8th WZL Gear Conference in the USA 2019 : Gear and Transmission Research, July 26rd/ 24th 2019, Westminster, CO/ USA( Hosted by Kapp Niles), 6-1-6-20, 2019

Bergs, Thomas
Troß, Nico
Löpenhaus, Christoph

[Contribution to a book, Contribution to a conference proceedings]
Potentials for Process Monitoring in Bevel Gear Grinding
In: 8th WZL Gear Conference in the USA 2019 : Gear and Transmission Research, July 26rd/ 24th 2019, Westminster, CO/ USA( Hosted by Kapp Niles), 10-1-10-20, 2019

Bergs, Thomas
Löpenhaus, Christoph
Solf, Mareike

[Journal Article]
Self-lubricating PVD Coatings in Interaction with Textured Workpiece Surfaces for Bulk Metal Forming
In: Dry metal forming open access journal, 5, 39-45, 2019

Bobzin, Kirsten
Brögelmann, Tobias
Kruppe, Nathan Christopher
Bergs, Thomas
Hild, Rafael
et al.

[Book, Dissertation / PhD Thesis]
Zerspankräfte beim kontinuierlichen Wälzschleifen von Stirnradverzahnungen, VI, 119 Seiten : Illustrationen, Diagramme, 2019

Scheffler, Hans Florian

[Book, Dissertation / PhD Thesis]
Modellbasierte, adaptive Prozessregelung für das Laserstrahlstrukturieren, XV, 138 Seiten : Illustrationen, Diagramme, 2019

Pothen, Mario

[Contribution to a conference proceedings, Journal Article]
Investigation of the negative influence of cooling lubricants on the deformation of the machine tool structure
In: E3S Web of Conferences, 95, 04006, 2019
[DOI: 10.1051/e3sconf/20199504006]

Brecher, Christian
Tzanetos, Filippos
Zontar, Daniel

[Contribution to a book, Contribution to a conference proceedings]
Development and Application of a Systematic Knowledge Management Process Model for the Tooling Industry
In: Proceedings of 3rd International Conference on Information System and Data Mining : ICISDM 2019 : Houston, Texas, USA, April 6-8, 2019, 148823, 190-195, 2019
[DOI: 10.1145/3325917.3325953]

Schuh, Günther
Kelzenberg, Christoph Maximilian Bernd
de Lange, Johan
Boshof, Julian

[Book, Dissertation / PhD Thesis]
Analyse des Betriebsverhaltens von Hochgeschwindigkeits-Wälzlagern unter radialen Lasten, XVI, 136 Seiten : Illustrationen, Diagramme, 2019

Falker, Jens

[Contribution to a book, Contribution to a conference proceedings]
Service Engineering Models : History and Present-Day Requirements
In: Advances in Production Management Systems. Towards Smart Production Management Systems : IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1-5, 2019, Proceedings. - Part II / edited by Farhad Ameri, Kathryn E. Stecke, Gregor von Cieminski, Dimitris Kiritsis, 547-554, 2019
[DOI: 10.1007/978-3-030-29996-5_63]

Senderek, Roman
Kuntz, Jan
Stich, Volker
Frank, Jana

[Contribution to a book, Contribution to a conference proceedings]
Scenarios for the Development and Use of Data Products Within the Value Chain of the Industrial Food Production
In: Advances in Production Management Systems. Towards Smart Production Management Systems : IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1-5, 2019, Proceedings. - Part II / edited by Farhad Ameri, Kathryn E. Stecke, Gregor von Cieminski, Dimitris Kiritsis, 294-302, 2019
[DOI: 10.1007/978-3-030-29996-5_34]

Stich, Volker
Holst, Lennard
Jussen, Philipp
Schiemann, Dennis

[Contribution to a book, Contribution to a conference proceedings]
From a Theory of Production to Data-Based Business Models
In: Advances in Production Management Systems. Towards Smart Production Management Systems : IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1-5, 2019, Proceedings. - Part II / edited by Farhad Ameri, Kathryn E. Stecke, Gregor von Cieminski, Dimitris Kiritsis, 277-284, 2019
[DOI: 10.1007/978-3-030-29996-5_32]

Schuh, Günther
Brettel, Malte
Prote, Jan-Philipp
Gützlaff, Andreas
Sauermann, Frederick Christian
et al.

[Contribution to a book, Contribution to a conference proceedings]
Handling Uncertainties in Production Network Design
In: Advances in Production Management Systems. Towards Smart Production Management Systems : IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1-5, 2019, Proceedings. - Part II / edited by Farhad Ameri, Kathryn E. Stecke, Gregor von Cieminski, Dimitris Kiritsis, 43-50, 2019
[DOI: 10.1007/978-3-030-29996-5_5]

Schuh, Günther
Prote, Jan-Philipp
Gützlaff, Andreas
Henk, Sebastian

[Journal Article]
Modeling of thermo-viscoelastic material behavior of glass over a wide temperature range in glass compression molding
In: Journal of the American Ceramic Society, jace.16963, 2019
[DOI: 10.1111/jace.16963]

Vu, Anh Tuan
Vu, Anh Ngoc
Grunwald, Tim
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Investigation of the Mechanical Punch Loads during Fine Blanking of High-Strength Steels with Cemented Carbide
In: Procedia manufacturing, 2019 (34), 90-100, 2019
[DOI: 10.1016/j.promfg.2019.06.125]

Baer, Oksana
Feuerhack, Andreas
Voigts, Herman Otto
Bergs, Thomas

[Journal Article]
Simulation schnell drehender Welle-Lager-Systeme: Teil 2
In: Die Antriebstechnik : ANT, 58 (7), 56-66, 2019

Brecher, Christian
Fey, Marcel
Bartelt, Andreas
Stahl, Thomas
Hassis, Alexander

[Contribution to a book, Contribution to a conference proceedings]
Additiv gefertigter Messerkopffräser für die werkstoffspezifische Kühlschmierstoffzufuhr
In: 6. Aachener Kühlschmierstoff-Tagung : 23.-24. Oktober 2019 / Thomas Bergs, Daniel Schraknepper (Hrsg.), 2445-257, 2019

Lakner, Thomas

[Journal Article]
Modellierung des Tribosystems beim trockenen Vollvorwärtsfließ-pressen mithilfe eines erweiterten Reibmodells
In: Dry metal forming open access journal, 5, 1-8, 2019

Bergs, Thomas
Hild, Rafael
Feuerhack, Andreas
Bobzin, Kirsten
Brögelmann, Tobias
et al.

[Journal Article]
Investigation of different tribological systems during full forward impact extrusion of aluminum alloy EN AW 6082
In: Industrial lubrication & tribology, 2019
[DOI: 10.1108/ILT-08-2019-0316]

Müller, Martina
Hild, Rafael
Trauth, Daniel
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Analysis of the Acceleration Transfer in the Unguided Vibratory Finishing Process
In: Proceedings of the 14th ASME International Manufacturing Science and Engineering Conference. - Volume 2: Processes; Materials, V002T03A024, 88 Seiten, 2019
[DOI: 10.1115/MSEC2019-2719]

Lachenmaier, Maximilian
Ohlert, Marius
Trauth, Daniel
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
A Coupling Approach Combining CFD and FEM Methods to Predict Cutting Fluid Effects on the Tool Temperature in Cutting Processes
In: Proceedings of the 14th ASME International Manufacturing Science and Engineering Conference. - Volume 2: Processes; Materials, V002T03A028, 8 Seiten, 2019
[DOI: 10.1115/MSEC2019-2782]

Helmig, Thorsten
Peng, Bingxiao
Ehrenpreis, Claas
Augspurger, Thorsten
Frekers, Yona Henrik
et al.

[Book, Dissertation / PhD Thesis]
Biokompatibilität plasma-elektrolytisch oxidierter Magnesiumwerkstoffe, XIII, 209 Seiten : Illustrationen, Diagramme, 2019

Kopp, Alexander

[Contribution to a book, Contribution to a conference proceedings]
Quality Improvement of Milling Processes Using Machine Learning-Algorithms
In: 16th IMEKO TC10 Conference “Testing, Diagnostics & Inspection as a Comprehensive Value Chain for Quality & Safety” : Berlin, Germany, September 3-4, 2019, 142-147, 2019

Frye, Maik
Schmitt, Robert Heinrich

[Book, Dissertation / PhD Thesis]
Spezifikation der cyber-physischen Veredelung von Auftragsverfolgungssystemen, XVI, 329 Seiten : Illustrationen, Diagramme, 2019

Bernardy, Anne

[Journal Article]
High-strength gears produced by powder metallurgical processes - KL500/93-2
In: Industrial Lubrication and Tribology, 2019
[DOI: 10.1108/ILT-06-2018-0248]

Klocke, Fritz
Broeckmann, Christoph
Löpenhaus, Christoph
Bezold, Alexander
Frech, Tim
et al.

[Contribution to a conference proceedings, Journal Article]
Integrated Energy Efficiency in Production
In: IFAC-PapersOnLine, 52 (13), 135-140, 2019
[DOI: 10.1016/j.ifacol.2019.11.165]

Heutmann, T.
Zhou, B.
Schommer, C.
Schmitt, Robert Heinrich

[Contribution to a conference proceedings, Journal Article]
Kernel Selection for Support Vector Machines for System Identification of a CNC Machining CenterCenter
In: IFAC-PapersOnLine, 52 (29), 192-198, 2019
[DOI: 10.1016/j.ifacol.2019.12.643]

Ay, Muzaffer
Stenger, David
Schwenzer, Max
Abel, Dirk
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Highly Iterative Planning of Manufacturing Technologies: Evaluation of Manufacturing Technology Capabilities Considering Information Uncertainties
In: Proceedings of the 14th ASME International Manufacturing Science and Engineering Conference. - Volume 1: Additive Manufacturing; Manufacturing Equipment and Systems; Bio and Sustainable Manufacturing, V001T02A001, 11 Seiten, 2019
[DOI: 10.1115/MSEC2019-2706]

Rey, Jan
Grünebaum, Timm Christian
Trauth, Daniel
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Productivity Increase - Model-based optimisation of NC-controlled milling processes to reduce machining time and improve process quality
In: IFAC-PapersOnLine, 52 (13), 1803-1807, 2019
[DOI: 10.1016/j.ifacol.2019.11.463]

Brecher, Christian
Wiesch, Marian
Wellmann, Frederik Norbert

[Contribution to a conference proceedings, Journal Article]
Continuous identification for mechanistic force models in milling
In: IFAC-PapersOnLine, 52 (13), 1791-1796, 2019
[DOI: 10.1016/j.ifacol.2019.11.461]

Schwenzer, Max
Stemmler, Sebastian
Ay, Muzaffer
Bergs, Thomas
Abel, Dirk

[Contribution to a conference proceedings, Journal Article]
Predicting Path Inaccuracies in Robot-based Machining Operations Using Inverse Kinematics
In: IFAC-PapersOnLine, 52 (13), 1785-1790, 2019
[DOI: 10.1016/j.ifacol.2019.11.460]

Lienenlüke, Lars
Storms, Simon
Brecher, Christian

[Journal Article]
Data on the current state of modular systems in a highly dynamic environment : Empirical analyses in the manufacturing industry and automotive industry of Germany
In: Data in Brief, 27, 104552, 2019
[DOI: 10.1016/j.dib.2019.104552]

Burggräf, Peter
Dannapfel, Matthias
Hehl, Fabian
Wenzl, Miriam
Freyer, Bernhard

[Book, Dissertation / PhD Thesis]
Steigerung der Prozessqualität des kundenindividuellen Auftragsabwicklungsprozesses durch Data Analytics, XV, 241 Seiten : Illustrationen, Diagramme, 2019

Groggert, Sebastian

[Book, Dissertation / PhD Thesis]
Modell zur typenbasierten Gestaltung von firmeninternen Inkubatoren, XIII, 289 Seiten : Diagramme, 2019

Lau, Felix

[Contribution to a conference proceedings, Journal Article]
A Method of Cutting Power Monitoring for Feed Axes in Milling by Power Measurement Device
In: IFAC-PapersOnLine, 52 (13), 2471-2476, 2019
[DOI: 10.1016/j.ifacol.2019.11.577]

Miura, Kazumasa
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Blockchain as Middleware+
In: Advances in Production Management Systems. Production Management for the Factory of the Future : IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1-5, 2019, Proceedings, Part I / edited by Farhad Ameri, Kathryn E. Stecke, Gregor von Cieminski, Dimitris Kiritsis, 443-450, 2019
[DOI: 10.1007/978-3-030-30000-5_55]

Holtkemper, David
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
Impact of Modeling Production Knowledge for a Data Based Prediction of Transition Times
In: Advances in Production Management Systems. Production Management for the Factory of the Future : IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1-5, 2019, Proceedings, Part I / edited by Farhad Ameri, Kathryn E. Stecke, Gregor von Cieminski, Dimitris Kiritsis, 341-348, 2019
[DOI: 10.1007/978-3-030-30000-5_43]

Schuh, Günther
Prote, Jan-Philipp
Hünnekes, Philipp
Sauermann, Frederick Christian
Stratmann, Lukas

[Contribution to a book, Contribution to a conference proceedings]
Using Prescriptive Analytics to Support the Continuous Improvement Process
In: Advances in Production Management Systems. Production Management for the Factory of the Future : IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1-5, 2019, Proceedings, Part I / edited by Farhad Ameri, Kathryn E. Stecke, Gregor von Cieminski, Dimitris Kiritsis, 46-53, 2019
[DOI: 10.1007/978-3-030-30000-5_6]

Schuh, Günther
Prote, Jan-Philipp
Busam, Thomas
Lorenz, Rafael
Netland, Torbjörn H.

[Journal Article]
Self‐Lubricating Physical Vapor Deposition Coatings for Dry Cold Massive Forming
In: Steel research international, 1900475, 2019
[DOI: 10.1002/srin.201900475]

Bobzin, Kirsten
Brögelmann, Tobias
Kruppe, Nathan Christopher
Bergs, Thomas
Trauth, Daniel
et al.

[Contribution to a book, Contribution to a conference proceedings]
Smart Service Engineering: Promising Approaches for a Digitalized Economy
In: Advances in Production Management Systems. Production Management for the Factory of the Future : IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1-5, 2019, Proceedings, Part I / edited by Farhad Ameri, Kathryn E. Stecke, Gregor von Cieminski, Dimitris Kiritsis, 674-681, 2019
[DOI: 10.1007/978-3-030-30000-5_82]

Senderek, Roman
Kuntz, Jan
Stich, Volker
Frank, Jana

[Book, Dissertation / PhD Thesis]
Entstehung von Spanaufschweißungen beim Trockenwälzfräsen, V, 122 Seiten : Illustrationen, Diagramme, 2019

Krömer, Markus

[Contribution to a conference proceedings, Journal Article]
Model Predictive Control in Milling based on Support Vector Machines
In: IFAC-PapersOnLine, 52 (13), 1797-1802, 2019
[DOI: 10.1016/j.ifacol.2019.11.462]

Ay, Muzaffer
Stemmler, Sebastian
Schwenzer, Max
Abel, Dirk
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Development of an alternative approach for cutting force determination in broaching
In: Proceedings Of The Asme Turbo Expo: Turbomachinery Technical Conference And Exposition. - Volume 6, 2019

Bergs, Thomas
Döbbeler, Benjamin
Seelbach, Tobias Markus
Seimann, Martin Albert
Klocke, Fritz

[Contribution to a book, Contribution to a conference proceedings]
Influence of an additional indexing rotary axis on wire edm performance for the automated manufacture of fir tree slots
In: Proceedings Of The Asme Turbo Expo: Turbomachinery Technical Conference And Exposition. - Volume 6, 2019

Bergs, Thomas
Tombul, Ugur
Herrig, Tim
Klink, Andreas
Welling, D.

[Contribution to a book, Contribution to a conference proceedings]
Impact damage characterization in CFRP plates using PCA and MEEMD decomposition methods in optical lock-in thermography phase images
In: Optical Measurement Systems for Industrial Inspection XI : 24-27 June 2019, Munich, Germany / Peter Lehmann, Wolfgang Osten, Armando Albertazzi Gonçalves Jr. (editors) ; sponsored by: SPIE ; cooperating organisations: European Optical Society, German Scientific Laser Society (Wissenschaftliche Gesellschaft Lasertechnik e.V.), 110562N, 2019
[DOI: 10.1117/12.2526357]

Fonseca de Oliveira, Bernardo Cassimiro
Birck Fröhlich, Herberth
Sánchez Barrera, Estiven
Baldo, Crhistian R.
Albertazzi Gonçalves, Armando
et al.

[Contribution to a conference proceedings, Journal Article]
Model Predictive Force Control in Grinding based on a Lightweight Robot
In: IFAC-PapersOnLine, 52 (13), 1779-1784, 2019
[DOI: 10.1016/j.ifacol.2019.11.459]

Husmann, Sonja
Stemmler, Sebastian
Hähnel, S.
Vogelgesang, S.
Abel, Dirk
et al.

[Book, Dissertation / PhD Thesis]
Untersuchung und Verbesserung des Kontaktverhaltens von Kegelrollenlagern bei hohen Drehzahlen, IX, 161, iv Seiten : Illustrationen, Diagramme, 2019

Hassis, Alexander

[Journal Article]
Context-Specific Influencing Factors Within A Transfer Of Innovation From Corporate Incubators
In: International Journal of Engineering Research and Technology : IJERT, 8 (10), 488-497, 2019

Schuh, Günther
Vogt, Florian
Maurer, Dennis

[Journal Article]
Agile Invention : Zehn Erfolgsthesen : Wie agile Arbeitsweisen erfolgreich in die frühen Phasen des Innovationsprozesses integriert werden (Teil 2)
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (6), 376-379, 2019
[DOI: 10.3139/104.112100]

Schuh, Günther
Kreutzer, Ramon
Vogt, Florian
Schwarberg, Thomas

[Book]
Eine Branche im Umbruch : Den technologischen Wandel in der Automobilindustrie gestalten, 2019
[DOI: 10.24406/IPT-N-561794]

Schuh, Günther
Graf, Leonie
Zeller, Paul
Scholz, Paul
Studerus, Bastian

[Book]
Technologiefrüherkennung gestalten : Acht Erfolgsfaktoren, 2019
[DOI: 10.24406/IPT-N-561795]

Schuh, Günther
Scheuer, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Adaptive modellprädiktive Kraftregelung beim Schruppfräsen
In: Autonomous systems and 5G in connected industries : Automation : 20. Leitkongress Mess- und Automatisierungstechnik : Automation 2019 : Baden-Baden, 02. und 03. Juli 2019 / VDI VDE Mess- und Automatisierungstechnik, 183-189, 2019

Ay, Muzaffer
Stemmler, Sebastian
Schwenzer, Max
Abel, Dirk
Bergs, Thomas

[Book, Dissertation / PhD Thesis]
Datengetriebene, kontextadaptive Produktivitätssteigerung von NC-Zerspanprozessen, XV, 192 Seiten : Illustrationen, Diagramme, 2019

Wellmann, Frederik Norbert

[Book, Dissertation / PhD Thesis]
Automatisierte Bahnplanung für komplexe Bauteile und Prozesse, V, 159 Seiten : Illustrationen, Diagramme, 2019

Nittinger, Johannes Alexander

[Contribution to a book, Contribution to a conference proceedings]
Control from the Cloud: Edge Computing, Services and Digital Shadow for Automation Technologies
In: 2019 International Conference on Robotics and Automation (ICRA) / publisher: IEEE, 9327-9333, 2019
[DOI: 10.1109/ICRA.2019.8793488]

Brecher, Christian
Buchsbaum, Melanie Sarah Katharina
Storms, Simon

[Contribution to a book, Contribution to a conference proceedings]
Monetizing Industry 4.0: Design Principles for Subscription Business in the Manufacturing Industry
In: Co-creating our future: scaling-up innovation capacities through the desgin and engineering of immersive, collaborative, empathic and cognitive systems : 2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC) : Sophia Antipolis Innovation Park, France, 17-19 June 2019 / ICE/IEEE ITMC - International Conference on Engineering, Technology and Innovation ; IEEE TEMS - Technology & Engineering Management Society ; publisher: IEEE, 9 Seiten, 2019
[DOI: 10.1109/ICE.2019.8792607]

Schuh, Günther
Frank, Jana
Jussen, Philipp
Rix, Calvin
Harland, Tobias

[Contribution to a book, Contribution to a conference proceedings]
Task-Specific Decision Support Systems in Multi-Level Production Systems based on the digital shadow
In: 2019 IEEE International Conference on Industrial Cyber Physical Systems (ICPS 2019) : Howards Plaza Hotel Taipei, Taiwan, 06-09 May, 2019 / publisher: IEEE, 603-608, 2019
[DOI: 10.1109/ICPHYS.2019.8780186]

Pause, Daniel
Brauner, Philipp
Faber, Marco Daniel
Fischer, Markus
Hünnekes, Philipp
et al.

[Contribution to a book, Contribution to a conference proceedings]
Development of a Blockchain Taxonomy
In: Co-creating our future: scaling-up innovation capacities through the desgin and engineering of immersive, collaborative, empathic and cognitive systems : 2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC) : Sophia Antipolis Innovation Park, France, 17-19 June 2019 / ICE/IEEE ITMC - International Conference on Engineering, Technology and Innovation ; IEEE TEMS - Technology & Engineering Management Society ; publisher: IEEE, 9 Seiten, 2019
[DOI: 10.1109/ICE.2019.8792659]

Wieninger, Simon
Schuh, Günther
Fischer, Vincent

[Journal Article]
In-situ material classification in sheet-metal blanking using deep convolutional neural networks
In: Production engineering, 13 (6), 743-749, 2019
[DOI: 10.1007/s11740-019-00928-w]

Unterberg, Martin
Niemietz, Philipp
Trauth, Daniel
Wehrle, Klaus
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Applying Passive Testing to an Industrial Internet of Things Plant
In: VALID 2019 : the Eleventh International Conference on Advances in System Testing and Validation Lifecycle : November 24-28, 2019, Valencia, Spain / IARIA ; VALID 2019 editors: Jos van Rooyen (Identify - Software Quality Services, the Netherlands), Samuele Buro (University of Verona, Italy), Marco Campion (University of Verona, Italy), Michele Pasqua (University of Verona, Italy), 31-37, 2019

Grochowski, Marco
Kowalewski, Stefan
Buchsbaum, Melanie Sarah Katharina
Brecher, Christian

[Book, Dissertation / PhD Thesis]
NVH optimization of ground bevel gears, VI, 135 Seiten : Illustrationen, Diagramme, 2019

Geradts, Peter

[Contribution to a book, Contribution to a conference proceedings]
Measuring Quality Orientation in Organisations: A Cognitive-Behavioural Approach
In: Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue : IMEKO TC 14 2019 / Vidosav D. Majstorovic, Numan Durakbasa, editors, 291-306, 2019
[DOI: 10.1007/978-3-030-18177-2_26]

Heine, Ina
Schmitt, Robert Heinrich

[Contribution to a book, Contribution to a conference proceedings]
Selection and Application of Machine Learning- Algorithms in Production Quality
In: Machine learning for cyber physical systems : selected papers from the International Conference ML4CPS 2018 / Jürgen Beyerer, Christian Kühnert, Oliver Niggemann (editors), 46-57, 2019
[DOI: 10.1007/978-3-662-58485-9_6]

Krauß, Jonathan
Frye, Maik
Beck, Gustavo Teodoro Döhler
Schmitt, Robert Heinrich

[Book, Dissertation / PhD Thesis]
Model to monetarily aggregate risks of procurement to support decision makers of manufacturing enterprises, xix, 144, xxxix Seiten : Illustrationen, Diagramme, 2019

von Cube, Philip

[Book, Dissertation / PhD Thesis]
Konfiguration globaler Produktionsnetzwerke im Spannungsfeld von Kosten- und Risikominimierung, XVII, 171 Seiten : Illustrationen, Diagramme, Karten, 2019

Witthohn, Carsten

[Book, Dissertation / PhD Thesis]
Modellierung des Schleifschneckenprofilverschleißes beim kontinuierlichen Wälzschleifen, VIII, 120 Seiten : Illustrationen, Diagramme, 2019

Ophey, Matthias

[Book, Dissertation / PhD Thesis]
Erklärungsmodell für die spanende Bearbeitung von ausferritischen Gusseisen mit Lamellengraphit, VIII, 150 Seiten : Illustrationen, Diagramme, 2019

Lung, Sven Uwe

[Journal Article]
Automation in cell and gene therapy manufacturing: from past to future
In: Biotechnology letters, 41 (11), 1245-1253, 2019
[DOI: 10.1007/s10529-019-02732-z]

Moutsatsou, P.
Ochs, J.
Schmitt, Robert Heinrich
Hewitt, C. J.
Hanga, M. P.

[Contribution to a book, Contribution to a conference proceedings]
Model-based Predictive Force Control in Milling
In: 2019 18th European Control Conference (ECC) / general chair: Franco Garofalo (Dept. of Electrical Engineering and Information Technology, University of Naples Federico II - Italy), 4313-4318, 2019
[DOI: 10.23919/ECC.2019.8795716]

Stemmler, Sebastian
Ay, Muzaffer
Schwenzer, Max
Abel, Dirk
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Applying Runtime Monitoring to the Industrial Internet of Things
In: 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) : Paraninfo Building, University of Zaragoza, Zaragoza, Spain, 10-13 September, 2019 : proceedings / organized by: University of Zaragoza, Spain ; sponsored by: the Institute of Electrical and Electronics Engineers (IEEE), IEEE Industrial Electronics Society (IES), Aragón Institute for Engineering Research (I3A), Spain, 2019
[DOI: 10.1109/ETFA.2019.8869447]

Grochowski, Marco
Kowalewski, Stefan
Buchsbaum, Melanie Sarah Katharina
Brecher, Christian

[Contribution to a conference proceedings, Journal Article]
Predictive control of a synchronized individual production
In: Procedia CIRP, 81, 69-74, 2019

Heutmann, Timo
Schmitt, Robert Heinrich

[Contribution to a conference proceedings, Journal Article]
Determination of the abstraction level in production network models
In: Procedia CIRP, 81, 198-203, 2019

Benfer, Martin
Ziegler, Moritz
Gützlaff, Andreas
Fränken, Bastian
Cremer, Sven Alexander
et al.

[Contribution to a conference proceedings, Journal Article]
Data Mining Definitions and Applications for the Management of Production Complexity
In: Procedia CIRP, 81, 874-879, 2019

Schuh, Günther
Reinhart, Gunther
Prote, Jan-Philipp
Sauermann, Frederick Christian
Horsthofer, Julia
et al.

[Contribution to a conference proceedings]
Self-driving chassis for low-invest and highly flexible electricvehicle assembly
In: [17th Global Conference on Sustainable Manufacturing, GCSM, 2019-10-09 - 2019-10-11, Shanghai, China], 2019

Wenning, Marius Julian
Kawollek, Sebastian
Kampker, Achim

[Abstract, Contribution to a conference proceedings]
Self Driving Chassis for Low-Invest and Highly Flexible Electric Vehicle Assembly
In: 1. Stuttgarter Tagung zur Zukunft der Automobilproduktion : book of abstracts : 26. September 2019 / Fraunhofer IPA, Universität Stuttgart, Institut für Fördertechnik und Logistik, ARENA2036 ; die Herausgeber Manuel Fechter, David Korte, Dr. Jürgen Henke, 36-37, 2019

Wenning, Marius Julian
Kawollek, Sebastian
Kampker, Achim

[Journal Article]
Fertigungsmesstechnik - Eckstein des Internet of Production
In: Technisches Messen : tm, 86 (9), 449-449, 2019
[DOI: 10.1515/teme-2019-0113]

Schmitt, Robert Heinrich

[Journal Article]
Qualifizierung einer digitalisierten Ultraschallprüfprozesskette
In: Technisches Messen : tm, 86 (9), 509-521, 2019
[DOI: 10.1515/teme-2019-0101]

Schmitt, Robert Heinrich
Lehmann, Nico
Nienheysen, Philipp Thomas

[Journal Article]
Vom Messwert über Wissen zum zielgerichteten Handeln : Tilo Pfeifer, Messtechniker und ein „Nestor des Qualitätsmanagements“, vollendet sein 80. Lebensjahr
In: Technisches Messen : tm, 86 (9), 540-543, 2019
[DOI: 10.1515/teme-2019-0112]

Schmitt, Robert Heinrich
Freudenberg, Reinhard
Peterek, Martin

[Journal Article]
Simulation-based process analysis for discontinuous cutting of generated bevel gears
In: Proceedings of the Institution of Mechanical Engineers / C, 233 (21/22), 7378-7390, 2019
[DOI: 10.1177/0954406219845409]

Mazak, Julia
Klocke, Fritz
Bergs, Thomas
Brecher, Christian
Löpenhaus, Christoph

[Contribution to a conference proceedings, Journal Article]
Ensemble Kalman filtering for force model identification in milling
In: Procedia CIRP, 82, 296-301, 2019

Schwenzer, Max
Stemmler, Sebastian
Ay, Muzaffer
Bergs, Thomas
Abel, Dirk

[Contribution to a conference proceedings, Journal Article]
Framework for defining information quality based on data attributes within the digital shadow using LDA
In: Procedia CIRP, 83, 304-310, 2019

Riesener, Michael
Dölle, Christian
Schuh, Günther
Tönnes, Carl Christian

[Journal Article]
Integrierte Entscheidungen in der Fabrikplanung : Dynamische Entscheidungslogik zur optimierten Auswahl von Produktions-, Gebäude- und Energiekonzepten
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (9), 521-524, 2019
[DOI: 10.3139/104.112149]

Dannapfel, Matthias
Vierschilling, Sebastian Patrick
Leenders, Ludger
Saraßa, Peter

[Book, Dissertation / PhD Thesis]
Prädiktive Werkzeug- und Prozessauslegung für das Räumen von Nickelbasislegierungen mit Hartmetallwerkzeugen, VII, 181 Seiten : Illustrationen, Diagramme, 2019

Seimann, Martin Albert

[Book, Dissertation / PhD Thesis]
Modellierung des Schleifprozesses beim Einsatz von gummigebundenen Schleifscheiben, XI, 155 Seiten : Illustrationen, Diagramme, 2019

Kretschmer, Arne

[Contribution to a book, Contribution to a conference proceedings]
Dataflow Challenges in an Internet of Production : A Security Privacy Perspective
In: [Proceedings of the 5th ACM Workshop on Cyber-Physical Systems Security and PrivaCy (CPS-SPC \'19)], 2019
[DOI: 10.1145/3338499.3357357]

Pennekamp, Jan
Henze, Martin
Schmidt, Simo Aleksis
Niemietz, Philipp
Fey, Marcel
et al.

[Book, Dissertation / PhD Thesis]
Korrekturmodelle thermisch bedingter TCP-Verlagerungen mit Hilfe maschinenintegrierter Verformungssensoren, XI, 148 Seiten : Illustrationen, Diagramme, 2019

Klatte, Michel

[Book, Dissertation / PhD Thesis]
Verteilte Mehrmassendämpfer für Werkzeugmaschinen, XIV, 166 Seiten : Illustrationen, Diagramme, 2019

Schmidt, Simo Aleksis

[Contribution to a book, Contribution to a conference proceedings]
Replicative manufacturing of glass optics with functional microstructures
In: Sixth European Seminar on Precision Optics Manufacturing : 9-10 April 2019, Teisnach, Germany / Rolf Rascher, Christian Schopf (editors) ; technical cosponsor and publisher: SPIE, 6 Seiten, 2019
[DOI: 10.1117/12.2526733]

Rojacher, Cornelia
Grunwald, Tim
Bergs, Thomas

[Book, Dissertation / PhD Thesis]
Anforderungsspezifische Lageregelung von Vorschubantrieben in Werkzeugmaschinen, xv, 143 Seiten : Illustrationen, Diagramme, 2019

Berners, Thomas Bernhard

[Journal Article]
Steigerung der Prozessfähigkeit roboterbasierter Bearbeitungsprozesse : Ein ganzheitlicher planungs- und steuerungstechnischer Ansatz
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 115 (7/8), 426-430, 2019
[DOI: 10.3139/104.112120]

Brecher, Christian
Lienenlüke, Lars
Storms, Simon

[Journal Article]
Influence of the metalworking fluid on the micropitting wear of gears
In: Wear : an international journal on the science and technology of friction, lubrication and wear, 434/435, 202996, 2019
[DOI: 10.1016/j.wear.2019.202996]

Brecher, Christian
Löpenhaus, Christoph
Greschert, René

[Journal Article]
Künstliche Intelligenz in der F&E
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (6), 351-354, 2019

Schuh, Günther
Dölle, Christian
Koch, Jan Felix

[Contribution to a conference proceedings, Journal Article]
Implications of Service-related Business Models on Product Development Processes
In: Procedia CIRP, 2019 (80), 756-761, 2019
[DOI: 10.1016/j.procir.2019.01.024]

Riesener, Michael
Dölle, Christian
Ebi, Manuel
Tittel, Jonas

[Contribution to a conference proceedings, Journal Article]
Data Mining Definitions and Applications for the Management of Production Complexity
In: Procedia CIRP, 81, 874-879, 2019
[DOI: 10.1016/j.procir.2019.03.217]

Schuh, Günther
Reinhart, Gunther
Prote, Jan-Philipp
Sauermann, Frederick Christian
Horsthofer, Julia
et al.

[Contribution to a conference proceedings, Journal Article]
Ensemble Kalman filtering for force model identification in milling
In: Procedia CIRP, 82, 296-301, 2019
[DOI: 10.1016/j.procir.2019.04.028]

Schwenzer, Max
Stemmler, Sebastian
Ay, Muzaffer
Bergs, Thomas
Abel, Dirk

[Contribution to a conference proceedings, Journal Article]
Framework for defining information quality based on data attributes within the digital shadow using LDA
In: Procedia CIRP, 83, 304-310, 2019
[DOI: 10.1016/j.procir.2019.03.131]

Riesener, Michael
Dölle, Christian
Schuh, Günther
Tönnes, Carl Christian

[Book, Dissertation / PhD Thesis]
Correction of systematic errors in piezoelectric cutting force measurement, X, 142 Seiten : Illustrationen, Diagramme, 2019

Rekers, Simon

[Book, Dissertation / PhD Thesis]
Der digitale Schatten in der Auftragsabwicklung in der Einzel- und Kleinserienfertigung, X, 238 Seiten : Illustrationen, Diagramme, 2019

Blum, Matthias

[Contribution to a book, Contribution to a conference proceedings]
Methode zur Umsetzung von Rührreibschweißprozessen auf konventionellen Fräsmaschinen mittels eines empirischen Ansatzes
In: DVS Congress 2019: Große Schweißtechnische Tagung, DVS-Studentenkongress, Vorträge der Veranstaltungen in Düsseldorf vom 16. bis 17. September 2019, 560-567, 2019

Rabe, Pascal
Motschke, Tobias
Schiebahn, Alexander
Reisgen, Uwe Kaspar

[Book, Dissertation / PhD Thesis]
Entwicklung einer Prozesssignatur für die elektrochemische Metallbearbeitung, VII, 144 Seiten : Illustrationen, Diagramme, 2019

Harst, Simon Christoph

[Book, Dissertation / PhD Thesis]
Simulationsgestützte Synchronisation der Zeitplanungsparameter für Variantenfertiger, XII, 307 Seiten : Illustrationen, 2019

Reschke, Jan

[Contribution to a book, Journal Article]
Discretization of the contact conditions considering the grain engagement for generating gear grinding
In: Forschung im Ingenieurwesen = Engineering Research, 83 (3), 793-800, 2019
[DOI: 10.1007/s10010-019-00351-8]

de Oliveira Teixeira, Patricia
Brecher, Christian
Löpenhaus, Christoph

[Contribution to a book, Journal Article]
Ansatz zur Modellierung der Nachgiebigkeit im Verzahnungshonprozess
In: Forschung im Ingenieurwesen = Engineering research, 83 (3), 707-717, 2019
[DOI: 10.1007/s10010-019-00376-z]

Schrank, Maximilian Günter
Kiesewetter-Marko, Caroline
Löpenhaus, Christoph
Epple, Alexander
Bergs, Thomas
et al.

[Contribution to a book, Journal Article]
Einfluss der elastischen Nachgiebigkeit auf die Kraft beim tauchenden Kegelradschleifen
In: Forschung im Ingenieurwesen = Engineering research, 83 (3), 741-750, 2019
[DOI: 10.1007/s10010-019-00326-9]

Solf, Mareike
Löpenhaus, Christoph
Bergs, Thomas

[Contribution to a book, Journal Article]
Abbildung der Zahnflankenbeanspruchung durch ein Analogiekonzept zur Erzeugung der Schadensart Zahnflankenbruch
In: Forschung im Ingenieurwesen = Engineering research, 83 (3), 589-601, 2019
[DOI: 10.1007/s10010-019-00370-5]

Goergen, Fabian
Brecher, Christian
Löpenhaus, Christoph

[Contribution to a book, Journal Article]
Untersuchung des Einflusses von Radkörperstrukturen auf das Einsatzverhalten von Zahnrädern
In: Forschung im Ingenieurwesen = Engineering research, 83 (3), 435-444, 2019
[DOI: 10.1007/s10010-019-00363-4]

Scholzen, Philipp
Billenstein, Daniel
Hammerl, Georg
Löpenhaus, Christoph
Glenk, Christian
et al.

[Contribution to a book, Journal Article]
Calculation of mixed friction conditions in large-Scale rolling-Sliding contacts for different surface structures
In: Forschung im Ingenieurwesen = Engineering research, 83 (3), 351-366, 2019
[DOI: 10.1007/s10010-019-00377-y]

Mevissen, Dieter
Löpenhaus, Christoph
Bergs, Thomas

[Journal Article]
Corrigendum to "Application of Hall effect for assessing grinding thermal damage" [J. Mater. Process. Technol. 270 (2019) 356-364]
In: Journal of materials processing technology, 274, 116299, 2019
[DOI: 10.1016/j.jmatprotec.2019.116299]

de Oliveira Teixeira, Patricia
Rego, Ronnie Rodrigo
Pinto, Fabio Wagner
de Oliveira Gomes, Jefferson
Löpenhaus, Christoph

[Journal Article]
Robots in machining
In: CIRP annals, manufacturing technology, 68 (2), 799-822, 2019
[DOI: 10.1016/j.cirp.2019.05.009]

Verl, Alexander
Valente, Anna
Melkote, Shreyes
Brecher, Christian
Ozturk, Erdem
et al.

[Journal Article]
Visualization of electro-physical and chemical machining processes
In: CIRP annals, manufacturing technology, 68 (2), 751-774, 2019
[DOI: 10.1016/j.cirp.2019.05.011]

Kunieda, Masanori
Overmeyer, Ludger
Klink, Andreas

[Journal Article]
Global production networks: Design and operation
In: CIRP annals, manufacturing technology, 68 (2), 823-841, 2019
[DOI: 10.1016/j.cirp.2019.05.008]

Lanza, Gisela
Ferdows, Kasra
Kara, Sami
Mourtzis, Dimitris
Schuh, Günther
et al.

[Journal Article]
A Coupling Approach Combining Computational Fluid Dynamics and Finite Element Method to Predict Cutting Fluid Effects on the Tool Temperature in Cutting Processes
In: Journal of manufacturing science and engineering, 141 (10), 101003, 2019
[DOI: 10.1115/1.4044102]

Helmig, Thorsten
Peng, Bingxiao
Ehrenpreis, Claas
Augspurger, Thorsten
Frekers, Yona Henrik
et al.

[Journal Article]
Künstliche Intelligenz in der Forschung & Entwicklung : Großes Potenzial für KI Integration
In: Industrie-Anzeiger, 141 (17/18), 30-31, 2019

Schuh, Günther
Dölle, Christian
Kreß, Julian

[Journal Article]
Neue Methode optimiert Produktportfolio : Mit Process Mining gegen Variantenflut
In: Industrie-Anzeiger, 141 (14), 20-21, 2019

Schuh, Günther
Dölle, Christian
Kreß, Julian

[Journal Article]
Berechnung von Planetenrollengewindetrieben: Berechnungsmethoden zur analytischen Beschreibung der Wälzkontakte von Planetenrollengewindetrieben
In: wt Werkstattstechnik online, 109 (5), 365-369, 2019

Brecher, Christian
Frenken, T.
Hildebrand, Maria
Fey, Marcel

[Journal Article]
Sicherheitskritische Änderungen in der Fertigung: Konzept zur kostenoptimierten Planung von Änderungen in der Fertigung sicherheitskritischer Bauteile
In: wt Werkstattstechnik online, 109 (6), 442-446, 2019

Bergs, Thomas
Hermann, Lennard
Rey, Jan
Barth, S.
Barth, Sebastian

[Journal Article]
Auslaufintegrierte Anlaufproduktion: Herausforderungen bei der Gestaltung von Fertigungssystemen in der auslaufintegrierten Anlaufproduktion
In: wt Werkstattstechnik online, 109 (6), 452-456, 2019

Bergs, T.
Apelt, Sebastian
Rey, Jan
Trauth, Daniel

[Journal Article]
Life cycle oriented technology chain optimization : a methodology to identify the influences of tool manufacturing on environmental impacts caused in the tool’s use phase
In: Production engineering, 13 (5), 567-577, 2019
[DOI: 10.1007/s11740-019-00911-5]

Grünebaum, Timm Christian
Müller, Ulrich
Rey, Jan
Barth, Sebastian
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Determination of the abstraction level in production network models
In: Procedia CIRP, 81, 198-203, 2019
[DOI: 10.1016/j.procir.2019.03.035]

Benfer, Martin
Ziegler, Moritz
Gützlaff, Andreas
Fränken, Bastian
Cremer, Sven Alexander
et al.

[Journal Article]
Außenrundschleifen von Inconel 718: Vergleich galvanisch gebundener CBN- und Diamant-Schleifscheiben unter Kühlung mit wasserbasierter Lösung
In: wt Werkstattstechnik online, 109 (6), 46-470, 2019

Bergs, Thomas
Ohlert, Marius
Lachenmaier, Maximilian
Trauth, Daniel

[Contribution to a book, Contribution to a conference proceedings]
Optimal loopshaping of position controls of feed axes in machine tools with position-dependent behavior
In: 2019 IEEE International Electric Machines Drives Conference (IEMDC) : May 12-15, 2019, Westin San Diego, San Diego, CA / IEMDC 2019 ; sponsored by: IEEE PES - Power Energy Society, IES, IAS - IEEE Industry Applications Society, PELS ; publisher: IEEE, 571-575, 2019
[DOI: 10.1109/IEMDC.2019.8785323]

Kehne, Sebastian
Berners, Thomas Bernhard
Epple, Alexander
Brecher, Christian

[Book, Dissertation / PhD Thesis]
Two-photon polymerization on metal surfaces for structuring moulding tools, XXII, 241 Seiten : Illustrationen, Diagramme, 2019

Harnisch, Emely Marie

[Contribution to a conference proceedings, Journal Article]
Predictive control of a synchronized individual production
In: Procedia CIRP, 81, 69-74, 2019
[DOI: 10.1016/j.procir.2019.03.013]

Heutmann, Timo
Schmitt, Robert Heinrich

[Journal Article]
Quality assessment and deviation analysis of three-dimensional geometrical characterization of a metal pipeline by pulse-echo ultrasonic and laser scanning techniques
In: Measurement : journal of the International Measurement Confederation (IMEKO), 145, 30-37, 2019
[DOI: 10.1016/j.measurement.2019.05.084]

Silva Marció, Bruno
Nienheysen, Philipp Thomas
Habor, Daniel
Flesch, Rodolfo C. C.

[Book, Dissertation / PhD Thesis]
Auf spektraler Kodierung basierendes, ortsauflösendes Messverfahren - λ-GPS, xiii, 135 Seiten : Illustrationen, Diagramme, 2019

Isenberg, Christopher

[Book]
Transfer von Innovationen aus Corporate Inkubatoren : Whitepaper - Empirische Studie, 21 Seiten : Diagramme, 2019
[DOI: 10.24406/IPT-N-525076]

Schuh, Günther
Vogt, Florian
Maurer, Dennis
Krause, Susanne
Vogelsang, Sara

[Book, Dissertation / PhD Thesis]
Untersuchungen zu den Auswirkungen der Strahlausbreitung durch die Integration leistungsstarker Laserbearbeitungseinheiten in Werkzeugmaschinen, VI, 129 Seiten : Illustrationen, Diagramme, 2019

du Bois-Reymond, Frédéric

[Book, Dissertation / PhD Thesis]
Gestaltung eines adaptiven Änderungssystems für einen beherrschten Serienhochlauf, XVII, 233 Seiten : Illustrationen, 2019

Basse, Felix

[Book, Dissertation / PhD Thesis]
Systematische Beherrschung von Zielkonflikten in Innovationsprojekten, X, 262 Seiten : Illustrationen, 2019

Hieber, Solveigh

[Book, Dissertation / PhD Thesis]
Gestaltung des Technologieeinkaufs für Start-ups und mittelständische Unternehmen, XIII, 305 Seiten : Illustrationen, Diagramme, 2019

Kreimeier, Matthias

[Book, Dissertation / PhD Thesis]
Ein quantitatives Modell zur Unterstützung des Fehlermanagements in der manuellen Montage, x, 149 Seiten : Illustrationen, 2019

Exner, Robin Alexander

[Book, Dissertation / PhD Thesis]
Model-based thermoelastic state evaluation of large workpieces for geometric inspection, 1 Online-Ressource (XIV, 169 Seiten) : Illustrationen, Diagramme, 2019

Ohlenforst, Markus

[Journal Article]
On a two components condition for regularity of the 3D Navier-Stokes equations under physical slip boundary conditions on non-flat boundaries
In: Mathematische Annalen, 374 (3/4), 1559-1596, 2018
[DOI: 10.1007/s00208-018-1755-z]

Beirão da Veiga, Hugo
Bemelmans, Josef
Brand, Johannes

[Contribution to a book, Contribution to a conference proceedings]
Automatische Multikopter-basierte Indoor-Inspektion großer Oberflächen : Vorstellung der Systemelemente eines zerstörungsfreien Inspektionssystems für die Oberflächeninspektion von Flugzeugen nach Blitzeinschlägen
In: 20. Leitkongress der Mess- und Automatisierungstechnik : Automation 2019 : Autonomous Systems and 5G in Connected Industries : Baden-Baden, 02. und 03. Juli 2019, 767-780, 2019

Pugliese, Roland Felix Leonard
Konrad, Thomas
Zweigel, René
Abel, Dirk
Kluge-Wilkes, Aline
et al.

[Journal Article]
Prediction of Process Forces in Gear Honing
In: Gear technology, 36 (3), 34-39, 2019

Bergs, Thomas
Klocke, Fritz
Brecher, Christian
Schrank, Maximilian Günter
Kampka, Marco
et al.

[Contribution to a book, Contribution to a conference proceedings]
Compensation of Process Forces with a Model-Based Feed-Forward Control for Robot Machining
In: The 4th International Conference on Control and Robotics Engineering : ICCRE 2019 : April 20- 23, 2019, Nanjing, China / sponsored by: Hohai University, Dalian Maritime University, 115-121, 2019
[DOI: 10.1109/ICCRE.2019.8724312]

Gründel, Lukas
Lienenlüke, Lars
Storms, Simon
Brecher, Christian

[Journal Article]
Roboterbasierte, spanende Bearbeitung: Machine-Learning-Algorithmus für eine modellbasierte Momentenvorsteuerung
In: wt Werkstattstechnik online, 109 (5), 352-357, 2019

Brecher, C.
Gründel, Lukas
Lienenlüke, Lars
Storms, Simon

[Journal Article]
World of Tooling
In: European tool & mould making : ETMM, 21 (5), 42-44, 2019

Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Wiese, Jan-Hendrik
Schultes, Thilo Konrad

[Journal Article]
Influence of machining processes on rim zone properties and high temperature oxidation behavior of 42CrMo4
In: Materials and corrosion, 2019
[DOI: 10.1002/maco.201910928]

Zander, Daniela
Klink, Andreas
Harst, Simon Christoph
Klocke, Fritz
Altenbach, Christoph

[Journal Article]
SPAICER: AI-based Resilience Management for manufacturing Companies
In: Atp-Edition (6/7), 36-39, 2019

Maass, Wolfgang
Gülpen, Christian
Piller, Frank Thomas
Bergs, Christian Thomas
Mattfeld, Patrick-Marcel
et al.

[Journal Article]
Methodology for the Measurement of the Heat Partitioning by Thermal Imaging in the Orthogonal Cutting Process
In: Journal of heat transfer, 141 (7), 072101, 2019
[DOI: 10.1115/1.4043170]

Augspurger, Thorsten
Bergs, Thomas
Döbbeler, Benjamin
Lima, A.

[Journal Article]
Future industrial networking : from use cases to wireless technologies to a flexible system architecture
In: Automatisierungstechnik : AT, 67 (7), 526-544, 2019
[DOI: 10.1515/auto-2018-0141]

Karrenbauer, Michael
Ludwig, Stephan
Buhr, Henning
Klessig, Henrik
Bernardy, Anne
et al.

[Contribution to a book, Contribution to a conference proceedings]
Development of an Industrie 4.0 Software Platform for SMEs
In: ICSLT 2019 : Proceedings of the 2019 the 5th International Conference on e-Society, e-Learning and e-Technologies, 1-6, 2019
[DOI: 10.1145/3312714.3312715]

Hoffmann, Jörg
Frölian, Hendrik
Morin, Antoine
Bleider, Martin

[Journal Article]
Dämpfungsmaße in Lagerpassungen : Methodik zur messtechnischen Ermittlung der Passfugendämpfung in einem Lagerprüfstand
In: wt Werkstattstechnik online, 109 (5), 342-346, 2019

Brecher, Christian
Motschke, Tobias
Fey, Marcel

[Journal Article]
Cooling capability of liquid nitrogen and carbon dioxide in cryogenic milling
In: CIRP annals, manufacturing technology, 68 (1), 73-76, 2019
[DOI: 10.1016/j.cirp.2019.03.016]

Pušavec, Franci
Grguraš, Damir
Koch, Norbert Matthias
Krajnik, Peter

[Journal Article]
Databased prediction of order-specific transition times
In: CIRP annals, manufacturing technology, 68 (1), 467-470, 2019
[DOI: 10.1016/j.cirp.2019.03.008]

Schuh, Günther
Prote, Jan-Philipp
Sauermann, Frederick Christian
Franzkoch, Bastian

[Journal Article]
Defined surface adjustment for medical magnesium implants by electrical discharge machining (EDM) and plasma electrolytic oxidation (PEO)
In: CIRP annals, manufacturing technology, 68 (1), 583-586, 2019
[DOI: 10.1016/j.cirp.2019.04.016]

Kopp, Alexander
Smeets, Ralf
Jung, Ole
Kröger, Nadja
Klink, Andreas

[Book, Dissertation / PhD Thesis]
Ultrapräzisionszerspanung von Hartmetall mit monokristallinen Diamantwerkzeugen, XII, 144 Seiten : Illustrationen, Diagramme, 2019

Doetz, Marius

[Book, Dissertation / PhD Thesis]
Modellierung der Walzkraft beim Dichtwalzen pulvermetallurgisch hergestellter Zahnräder, VI, 139 Seiten : Illustrationen, Diagramme, 2019

Frech, Tim

[Contribution to a conference proceedings]
Self-lubricating PVD-Coatings for dry cold massive forming
In: [11th Tooling 2019 Conference, Tooling 2019, 2019-05-12 - 2019-05-16, Aachen, Germany], 2019

Bobzin, Kirsten
Brögelmann, Tobias
Kruppe, Nathan Christopher
Hoffmann, Dennis Christopher
Bergs, Thomas
et al.

[Book, Dissertation / PhD Thesis]
Thermal skin effect in laser-assisted tape placement of thermoplastic composites, 1 Online-Ressource (X, 203 Seiten) : Illustrationen, Diagramme, 2019

Weiler, Thomas

[Journal Article]
Measurement and Modeling of Heat Partitions and Temperature Fields in the Workpiece for Cutting Inconel 718, AISI 1045, Ti6Al4V, and AlMgSi0.5
In: Journal of manufacturing science and engineering, 141 (6), 061007, 2019
[DOI: 10.1115/1.4043311]

Augspurger, Thorsten
Bergs, Thomas
Döbbeler, Benjamin

[Contribution to a book, Contribution to a conference proceedings]
A load-adaptive and predictive control of energy-efficient building automation in production environment
In: 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 18-20 July 2018, Gulf of Naples, Italy / edited by Roberto Teti, 245-250, 2019
[DOI: 10.1016/j.procir.2019.02.058]

Zhou, Beiyan
Chikkala, Jayaaditya
Schmitt, Robert Heinrich

[Contribution to a book, Contribution to a conference proceedings]
Effects of the update frequency of production plans on the logistical performance of production planning and control
In: 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 18-20 July 2018, Gulf of Naples, Italy / Edited by Roberto Teti, Doriana M. D'Addona, 421-426, 2019
[DOI: 10.1016/j.procir.2019.02.115]

Schuh, Günther
Prote, Jan-Philipp
Luckert, Melanie
Hünnekes, Philipp
Schmidhuber, Matthias

[Contribution to a book, Contribution to a conference proceedings]
Analysis of the cutting conditions for radial-axial infeed strategies in gear hobbing
In: 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 18-20 July 2018, Gulf of Naples, Italy / Edited by Roberto Teti, Doriana M. D'Addona, 68-73, 2019
[DOI: 10.1016/j.procir.2019.02.013]

Troß, Nico
Löpenhaus, Christoph
Klocke, Fritz

[Journal Article]
Flying Metrology and Defect Identification for Aircraft Surface Inspection
In: PhotonicsViews : optics, photonics, laser technology, 16 (1), 68-71, 2019
[DOI: 10.1002/phvs.201900009]

Buckhorst, Armin F.
Kluge-Wilkes, Aline
Schmitt, Robert Heinrich

[Contribution to a book, Contribution to a conference proceedings]
Model-based interfacing of large-scale metrology instruments
In: Multimodal Sensing: Technologies and Applications : SPIE optical metrology ; 24-27 June 2019 / Editor(s): Ettore Stella, 10 Seiten, 2019
[DOI: 10.1117/12.2527461]

Montavon, Benjamin Leendert
Peterek, Martin
Schmitt, Robert Heinrich

[Journal Article]
Artifact-free coordinate registration of heterogeneous Large-Scale Metrology systems
In: CIRP annals, manufacturing technology, 68 (1), 503-506, 2019
[DOI: 10.1016/j.cirp.2019.04.077]

Pfeifer, Tilo
Montavon, Benjamin Leendert
Peterek, Martin
Hughes, Ben

[Contribution to a book, Contribution to a conference proceedings]
Automation decisions in flow-line assembly systems based on a cost-benefit analysis
In: 52nd CIRP Conference on Manufacturing Systems (CMS), Ljubljana, Slovenia, June 12-14, 2019 / Edited by Peter Butala, Edvard Govekar, Rok Vrabič, 529-534, 2019
[DOI: 10.1016/j.procir.2019.03.150]

Burggräf, Peter
Wagner, Johannes
Dannapfel, Matthias
Fluchs, Sarah
Müller, Katharina Maria
et al.

[Contribution to a book, Contribution to a conference proceedings]
The Digital Shadow as Enabler for Data Analytics in Product Life Cycle Management
In: 26th CIRP Conference on Life Cycle Engineering (LCE) Purdue University, West Lafayette, IN, USA May 7-9, 2019 / Edited by John W. Sutherland, Steven J. Skerlos, Fu Zhao, 729-734, 2019
[DOI: 10.1016/j.procir.2019.01.083]

Riesener, Michael
Schuh, Günther
Dölle, Christian
Tönnes, Carl Christian

[Journal Article]
Die Montage passt sich an : Adaptive Assistenzsysteme für den Menschen in der Fabrik der Zukunft
In: Industrie-Anzeiger, 141 (15/16), 26-27, 2019

Burggräf, Peter
Dannapfel, Matthias
Adlon, Tobias
Müller, Katharina Maria

[Contribution to a book, Contribution to a conference proceedings]
Adaptive Feed Control for Machining with Industrial Robots
In: The 4th International Conference on Control and Robotics Engineering : ICCRE 2019 : April 20- 23, 2019, Nanjing, China / sponsored by: Hohai University, Dalian Maritime University, 99-104, 2019
[DOI: 10.1109/ICCRE.2019.8724141]

Lienenlüke, Lars
Wurm, Steffen
Storms, Simon
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Model-based Engineering of modern Automation Structures with the Interdisciplinary Modeling Language (IML)
In: SYSCON 2019 : the 13th Annual IEEE International Systems Conference : April 8-11, 2019, Hyatt Grand Cypress Hotel, Orlando, Florida, USA : 2019 conference proceedings / sponsors and organizers: IEEE Systems Council, IEEE, 81-88, 2019
[DOI: 10.1109/SYSCON.2019.8836772]

Flender, Jerome
Storms, Simon
Herfs, Werner
Witte, Martin

[Journal Article]
Estimation of the virtual workpiece quality by the use of a spindle-integrated process force measurement
In: CIRP annals, manufacturing technology, 68 (1), 381-384, 2019
[DOI: 10.1016/j.cirp.2019.04.020]

Brecher, Christian
Eckel, Hans-Martin
Motschke, Tobias
Fey, Marcel
Epple, Alexander

[Journal Article]
PPS als Integrationsplattform: Fertigungsunterstützende IT-Systeme effizient miteinander verknüpfen
In: wt Werkstattstechnik online, 109 (5), 377-381, 2019

Brecher, Christian
Fimmers, Christian
Blanke, Philipp
Storms, Simon
Herfs, Werner

[Contribution to a conference proceedings, Journal Article]
High-precision evaluation of electromagnetic tracking
In: International journal of computer assisted radiology and surgery, 14 (7), 1127-1135, 2019
[DOI: 10.1007/s11548-019-01959-5]

Kügler, David
Krumb, Henry
Bredemann, Judith
Stenin, Igor
Kristin, Julia
et al.

[Contribution to a book, Contribution to a conference proceedings]
Modelling and Assessing Line-less Mobile Assembly Systems
In: 52nd CIRP Conference on Manufacturing Systems (CMS), Ljubljana, Slovenia, June 12-14, 2019 / Edited by Peter Butala, Edvard Govekar, Rok Vrabič, 724-729, 2019
[DOI: 10.1016/j.procir.2019.03.184]

Hüttemann, Guido
Buckhorst
Schmitt, Robert Heinrich

[Contribution to a book, Contribution to a conference proceedings]
Assignment, Sequencing and Location Planning in Line-less Mobile Assembly Systems
In: Tagungsband des 4. Kongresses Montage Handhabung Industrieroboter / herausgegeben von Thorsten Schüppstuhl, Kirsten Tracht, Jürgen Roßmann, 227-238, 2019
[DOI: 10.1007/978-3-662-59317-2_23]

Buckhorst, Armin F.
Hüttemann, Guido
Grahn, Lea
Schmitt, Robert Heinrich

[Contribution to a book, Contribution to a conference proceedings]
Potenzial generativ gefertigter Bauteile in der Getriebetechnik
In: Antriebstechnisches Kolloquium ATK 2019 : Tagungsband : Aachen, 12. - 13. März 2019 / herausgegeben von Univ.-Prof. Dr.-Ing. Georg Jacobs und Jonas Marheineke, M. Sc. (Institut für Maschinenelemente und Systementwicklung), 251-264, 2019

Brecher, Christian
Löpenhaus, Christoph
Greschert, René
Poprawe, Reinhart
Schleifenbaum, Johannes Henrich
et al.

[Book, Dissertation / PhD Thesis]
Software-gestützte Planung cyber-physischer Montagesysteme mittels durchgängiger Informationsnutzung, VIII, 179 Seiten : Illustrationen, Diagramme, 2019

Hörauf, Leenhard

[Dissertation / PhD Thesis]
Informations- und Planungsmodell für Fertigungsmanagementsysteme, XI, 169 Seiten : Illustrationen, Diagramme, 2019

Müller, Simon

[Contribution to a book, Contribution to a conference proceedings]
Fast Machine Tool Calibration using a single Laser Tracker
In: Laser metrology and machine performance XIII : 13th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance : Lamdamap 2019 / organised by: euspen ; edited by Professor Liam Blunt & Dr. Wolfgang Knapp, 203-213, 2019

Montavon, Benjamin Leendert
Dahlem, Jan Philipp
Schmitt, Robert Heinrich

[Contribution to a book, Contribution to a conference proceedings]
Digitalized Ultrasonic Inspection By Optical Tracking
In: 2019 IEEE/SICE International Symposium on System Integration (SII) : [Proceedings], 2019
[DOI: 10.1109/SII.2019.8700372]

Schmitt, Robert H.
Nienheysen, Philipp
Lehmann, Nico
Jahangir, Hamid
Peterek, Martin
et al.

[Journal Article]
Increasing resource efficiency with an engineering decision support system for comparison of product design variants
In: Journal of cleaner production, 210, 1051-1062, 2018
[DOI: 10.1016/j.jclepro.2018.11.104]

Buchert, Tom
Ko, Nathanael
Graf, Roberta
Vollmer, Thomas
Alkhayat, Moritz
et al.

[Book, Dissertation / PhD Thesis]
Gestaltungsmodell der Kennzahlen und Indikatoren bei der Einführung und Weiterentwicklung von Qualitätsmanagementsystemen für deutsche Hochschulen, xiii, 229 Seiten : Illustrationen, 2019

Reschke, Rebecca

[Journal Article]
An advanced FE-modeling approach to improve the prediction in machining difficult-to-cut material
In: The international journal of advanced manufacturing technology, 103 (5/8), 2183-2196, 2019
[DOI: 10.1007/s00170-019-03456-0]

Peng, Bingxiao
Bergs, Thomas
Klocke, Fritz
Döbbeler, Benjamin

[Contribution to a book, Journal Article]
Analyse der tribologischen Verhältnisse beim Schleifen von polykristallinem Diamant auf Basis eines Einkornreibprüfstandes
In: Jahrbuch Schleifen, Honen, Läppen und Polieren, 68, 2-15, 2019

Klocke, Fritz
Vits, Rudolf
Trauth, Daniel
Mattfeld, Patrick-Marcel
Vits, Frederik Jan

[Contribution to a book, Contribution to a conference proceedings]
Data segmentation of effective power signals in the hobbing process
In: 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 18-20 July 2018, Gulf of Naples, Italy / Edited by Roberto Teti, Doriana M. D'Addona, 45-50, 2019
[DOI: 10.1016/j.procir.2019.02.009]

Klocke, Fritz
Döbbeler, Benjamin
Goetz, Sven
Arruda, José

[Journal Article]
Mit System zum Erfolg : Ein Leitfaden zur erfolgreichen Implementierung von Industrie 4.0 im Werkzeugbau
In: Form + Werkzeug, 27 (2), 52-53, 2019

Schuh, Günther
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
de Lange, Johan
Ochel, Tim Peter

[Journal Article]
Thermografie zur Detektion von CFK-Schäden - Quantitativer Vergleich der Lock-in- und Puls-Phasen-Thermografie
In: Technisches Messen : tm, 86 (5), 285-296, 2019
[DOI: 10.1515/teme-2018-0086]

Ekanayake, Sarah Indu
Wiedbrauck, Dennis
Schäferling, Marielouise
Häfner, Benjamin
Schmitt, Robert Heinrich
et al.

[Contribution to a book, Contribution to a conference proceedings]
Investigation of Friction and Adhesion Behavior of Textured Workpieces and Coated Tools Under Dry Tribological Contact
In: TMS 2019 148th Annual Meeting Exhibition supplemental proceedings / The Minerals, Metals Materials Society, editor, 1615-1628, 2019
[DOI: 10.1007/978-3-030-05861-6_151]

Hild, Rafael
Mannens, Robby Norbert
Trauth, Daniel
Mattfeld, Patrick-Marcel
Bergs, Thomas
et al.

[Book, Dissertation / PhD Thesis]
Einfluss der Topographie kunstharzgebundener CBN-Schleifscheiben auf das thermo-mechanische Belastungskollektiv beim Schleifen, X, 161 Seiten : Illustrationen, Diagramme, 2019

Barth, Sebastian

[Journal Article]
Vom Bewusstsein bis zum Roll-out: Prozess zur Entwicklung und Umsetzung von Industrie 4.0-Lösungen
In: Industrie-Anzeiger, 141 (12/13), 22-23, 2019

Schuh, Günther
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Wiese, Jan-Hendrik
Helbig, Jens

[Journal Article]
Leitfaden zum Erfolg: Organisatorischer Ordnungsrahmen zur Einführung von Industrie 4.0
In: Industrie-Anzeiger, 141 (9), 32-33, 2019

Schuh, Günther
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
de Lange, Johan
Boshof, Julian

[Book, Dissertation / PhD Thesis]
Untersuchung des Drahtsystems zur Prozessstabilisierung für das drahtbasierte Laserauftragschweißen in der additiven Fertigung, IX, 152 Seiten, Seite A-W : Illustrationen, Diagramme, 2019

Klingbeil, Nils

[Contribution to a book, Contribution to a conference proceedings]
Towards sustainable production : a methodology to assess influences between life cycle phases in tool manufacturing
In: 26th CIRP Conference on Life Cycle Engineering (LCE) Purdue University, West Lafayette, IN, USA May 7-9, 2019 / Edited by John W. Sutherland, Steven J. Skerlos, Fu Zhao, 376-381, 2019
[DOI: 10.1016/j.procir.2019.01.001]

Grünebaum, Timm Christian
Hermann, Lennard
Trauth, Daniel
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Service-oriented Information Model for the Model-Driven Control of Dynamically Interconnected Assembly Systems
In: Tagungsband des 4. Kongresses Montage Handhabung Industrieroboter / Thorsten Schüppstuhl ; Kirsten Tracht ; Jürgen Roßmann, Hrsg., 2019
[DOI: 10.1007/978-3-662-59317-2_3]

Grunert, Dennis
Jung, Sven
Leipold, Thomas
Göppert, Mirko Robin Amon
Hüttemann, Guido
et al.

[Journal Article]
Potenziale datenbasierter Produktallokationen : Data-Analytics-Anwendungen für Produktallokationen in globalen Produktionsnetzwerken
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (3), 96-100, 2019
[DOI: 10.3139/104.112053]

Verhaelen, Bastian
Thomas, Katharina
Häfner, Benjamin
Lanza, Gisela
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
Acoustic emission signal source separation for a flank wear estimation of drilling tools
In: 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 18-20 July 2018, Gulf of Naples, Italy / edited by Roberto Teti, Doriana M. D'Addona, 57-62, 2019
[DOI: 10.1016/j.procir.2019.02.011]

Klocke, Fritz
Döbbeler, Benjamin
Pullen, Thomas
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Databased learning of influencing factors in order specific transition times
In: Procedia manufacturing, 31, 356-362, 2019
[DOI: 10.1016/j.promfg.2019.03.056]

Schuh, Günther
Prote, Jan-Philipp
Molitor, Marco
Sauermann, Frederick Christian
Schmitz, Seth

[Contribution to a book, Contribution to a conference proceedings]
Machine Learning for Tool Wear Classification in Milling Based on Force and Current Sensors
In: [2019 4th International Conference on Mechanical, Manufacturing, Modeling and Mechatronics, ICAM 2019, 2019-02-22 - 2019-02-24, Nince, France], 2019
[DOI: 10.1088/1757-899X/520/1/012009]

Schwenzer, Max
Miura, Kazumasa
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Investigation of transient temperature fields in the milling cutter under CO2 cooling by means of an embedded thermocouple
In: 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 18-20 July 2018, Gulf of Naples, Italy / edited by Roberto Teti, 33-38, 2019
[DOI: 10.1016/j.procir.2019.02.007]

Augspurger, Thorsten
Koch, Norbert Matthias
Klocke, Fritz
Döbbeler, Benjamin

[Contribution to a book, Contribution to a conference proceedings]
Analysis of the Tooth Root Roughness of Hobbed Gears
In: GETPRO, 7th International Conference on Gear and Drivetrain Production, 19.-20. March, 2019 Würzburg, Germany, 293-300, 2019

Kühn, Felix
Löpenhaus, C.
Bergs, Thomas

[Journal Article]
Gestaltung von Produktionsnetzwerken : Verknüpfung von datengetriebenen Analysen mit Expertenwissen zur Konfiguration globaler Produktionsnetzwerke
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (1/2), 7-10, 2019
[DOI: 10.3139/104.112038]

Schuh, Günther
Prote, Jan-Philipp
Gützlaff, Andreas
Rodemann, Niklas

[Contribution to a book]
Best Practice Example 2: Demonstration Factory at WZL, RWTH Aachen, Germany
In: Learning Factories : Concepts, Guidelines, Best-Practice Examples / by Eberhard Abele, Joachim Metternich, Michael Tisch, Chap 11.2/ S. 338-342, 2018

Schuh, Günther
Prote, Jan-Philipp
Fränken, Bastian
Ays, Julian Leander

[Contribution to a book, Contribution to a conference proceedings]
Towards an Infrastructure Enabling the Internet of Production
In: 2019 IEEE International Conference on Industrial Cyber Physical Systems (ICPS 2019) : Howards Plaza Hotel Taipei, Taiwan, 06-09 May, 2019 / publisher: IEEE, 31-37, 2019
[DOI: 10.1109/ICPHYS.2019.8780276]

Pennekamp, Jan
Glebke, René
Henze, Martin
Meisen, Tobias
Quix, Christoph
et al.

[Journal Article]
Thermal condition monitoring of a motorized milling spindle
In: Production engineering, 13 (5), 539-546, 2019
[DOI: 10.1007/s11740-019-00905-3]

Brecher, Christian
Ihlenfeldt, Steffen
Neus, Stephan
Steinert, Alexander
Galant, Alexander

[Book, Dissertation / PhD Thesis]
Einsatz eines Cyber-Physischen Produktionssystems zur flexiblen Positionierung und Ausrichtung von dünnwandigen Großbauteilen, XIII, 147 Seiten : Illustrationen, Diagramme, 2019

Bertelsmeier, Felix

[Journal Article]
Influence of Glassy Carbon Surface Finishing on Its Wear Behavior during Precision Glass Moulding of Fused Silica
In: Materials / Molecular Diversity Preservation International, 12 (5), 692, 2019
[DOI: 10.3390/ma12050692]

Grunwald, Tim
Wilhelm, Dennis Patrick
Dambon, Olaf
Bergs, Thomas

[Book, Proceedings]
2019 Conference for Wind Power Drives (CWD) : CWD2019 : Aachen 12th- 13th of March
In: 2019 Conference for Wind Power Drives Aachen 2019-03-12 - 2019-03-13, 2019

Abel, Dirk
Brecher, Christian
de Doncker, Rik W.
Hameyer, Kay
Jacobs, Georg
et al.

[Book, Proceedings]
Conference for Wind Power Drives : CWD2019 Aachen , 12th - 13th of March : conference proceedings
In: 4th Conference for Wind Power Drives Aachen 2019-03-12 - 2019-03-13, III, 525 Seiten : Illustrationen, Diagramme, 2019

Abel, Dirk
Brecher, Christian
de Doncker, Rik W.
Hameyer, Kay
Jacobs, Georg
et al.

[Contribution to a conference proceedings, Journal Article]
Development of an application-oriented tool life equation for dry gear finish hobbing
In: Wear : an international journal on the science and technology of friction, lubrication and wear, 426/427, 1563-1572, 2019
[DOI: 10.1016/j.wear.2018.12.037]

Sari, D.
Troß, N.
Löpenhaus, Christoph
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Analysis of wear phenomena during forward extrusion under dry friction conditions
In: Wear : an international journal on the science and technology of friction, lubrication and wear, 426/427 (B), 1362-1370, 2019
[DOI: 10.1016/j.wear.2019.01.127]

Hild, Rafael
Bergs, Thomas
Mattfeld, Patrick-Marcel
Trauth, Daniel
Klocke, Fritz
et al.

[Contribution to a conference proceedings, Journal Article]
Investigating the influence of workpiece placement on the uncertainty of measurements in industrial computed tomography
In: The e-journal of nondestructive testing & ultrasonics, 23 (3), 6, 2019

Grozmani, Natalia
Buratti, A.
Schmitt, R.

[Journal Article]
Next Level Production Networks
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114 (3), 101-104, 2019

Friedli, Thomas
Schuh, G.
Lanza, G.
Remling, Dominik
Gützlaff, Andreas
et al.

[Journal Article]
Prozessparallele Qualitätssicherung in der spanenden Fertigung
In: Werkstoffe in der Fertigung, 56 (3), 17-18, 2019

Brecher, Christian
Wiesch, Marian
Neus, Stephan

[Journal Article]
Neue Stahlgüten für die Tiefaufkohlung von Getriebezahnrädern für Windkraftanlagen
In: HTM - journal of heat treatment and materials, 74 (2), 99-114, 2019
[DOI: 10.3139/105.110377]

Catteau, Simon
Sourmail, Thomas
Roca, Elvira
Ziegler, Christoph D.
Fayek, Patrick
et al.

[Contribution to a book, Contribution to a conference proceedings]
Kostengünstige Automatisierung von älteren Werkzeugmaschinen im Kontext von Industrie 4.0
In: [Fachtagung Mechatronik 2019, 2019-03-27 - 2019-03-28, Paderborn, Germany], 243-248, 2019
[DOI: 10.17619/UNIPB/1-783]

Brecher, Christian
Blanke, Philipp
Storms, Simon

[Contribution to a book, Contribution to a conference proceedings]
Modellierung des Betriebsverhaltens von Kugelgewindetrieben
In: Antriebstechnisches Kolloquium : ATK 2019, Aachen 12.-13. März : Tagungsband / Herausgegeben von Univ.-Prof. Dr.-Ing. Georg Jacobs und Jonas Marheineke, M.Sc. (Institut für Maschinenelemente und Systementwicklung); MSE, Institut für Maschinenelemente und Systementwicklung, RWTH Aachen University, 397-410, 2019

Brecher, Christian
Kneer, Florian
Falker, Jens
Eßer, Bastian
Fey, Marcel

[Journal Article]
Torsionbruchverhalten von HSK-A und HSK-AB
In: Maschinenmarkt, 125 (8), 40-43, 2019

Brecher, Christian
Bergs, Christian Siegfried
Fey, Marcel

[Journal Article]
Messunsicherheitsbestimmung komplexer Prüfprozesse
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (3), 124-127, 2019
[DOI: 10.3139/104.112052]

Müller, Tobias
Voigtmann, Christoph Michael
Schmitt, Robert Heinrich

[Book, Dissertation / PhD Thesis]
Wirksamkeit tribologischer Mikrostrukturen bei extremen Einsatzbedingungen und Ableitung eines Fertigungsmodells für das UKP-Laserabtragen, V, 194 Seiten : Illustrationen, Diagramme, 2019

Janssen, Andreas

[Contribution to a conference proceedings, Journal Article]
Verfahren zur kombinierten Form- und Zentrierprüfung mikrooptischer Asphären mit optischer Kohärenztomographie
In: Technisches Messen : tm, 86 (4), 208-215, 2019
[DOI: 10.1515/teme-2019-0002]

Riediger, Max
Schmitt, Robert Heinrich

[Book]
MIA Expertisen, 18 Seiten : Illustrationen, 2019

Hees, Frank
Begaß, Dieter M.
Fromhold-Eisebith, Martina
Schmitt, Gisela
Burggräf, Peter
et al.

[Book]
MIA Expertisen, 35 Seiten : Illustrationen, 2019

Hees, Frank
Begaß, Dieter
Fromhold-Eisebith, Martina
Schmitt, Gisela
Burggräf, Peter
et al.

[Contribution to a book, Contribution to a conference proceedings]
Methodology for an Integrative Manufacturing Change Management in Technology Planning for Medical Products
In: International Conference on Competitive Manufacturing (COMA 19), 31 January-1 February 2019, Stellenbosch, South Africa / organised by Department of Industrial Engineering, Stellenbosch University ; editors: Dimitri Dimitrov, Devon Hagedorn-Hansen, Konrad von Leipzig, 470-475, 2019

Hermann, Lennard
Rey, Jan
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
An analytical approach for the determination of the temperature distribution in the cross section of a sheet metal caused by inductive heating
In: Procedia manufacturing, 2019 (29), 353-360, 2019
[DOI: 10.1016/j.promfg.2019.02.148]

Weiser, Ingo Felix
Mannens, Robby Norbert
Feuerhack, Andreas
Trauth, Daniel
Bergs, Thomas

[Contribution to a conference proceedings]
Influence of the Infeed Strategy on the Cutting Conditions in Gear Hobbing
In: GETPRO, 7th International Conference on Gear and Drivetrain Production, 19.-20. March, 2019 Würzburg, Germany, 275-280, 2019

Troß, Nico
Löpenhaus, Christoph
Bergs, Thomas

[Journal Article]
Experimental analysis of surface integrity of cemented carbides resulting from contemporary sinking EDM technology
In: Production engineering, 13 (3/4), 511-517, 2019
[DOI: 10.1007/s11740-019-00896-1]

Bergs, Thomas
Chrubasik, Lothar Reiner
Petersen, Timm
Klink, Andreas
Klocke, Fritz

[Contribution to a book, Contribution to a conference proceedings]
Model for the calculation of kinematic roughness in the tooth root
In: 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 18-20 July 2018, Gulf of Naples, Italy / edited by Roberto Teti, 15-20, 2019
[DOI: 10.1016/j.procir.2019.02.004]

Kühn, Felix
Löpenhaus, Christoph
Klocke, Fritz

[Journal Article]
Influence of patient-specific anatomy on medical computed tomography and risk evaluation of minimally invasive surgery at the otobasis
In: European archives of oto-rhino-laryngology and head & neck, 276 (2), 375-382, 2018
[DOI: 10.1007/s00405-018-5249-0]

Schieferbein, Vanessa
Bredemann, Judith
Schmitt, Robert Heinrich
Stenin, Igor
Klenzner, T.
et al.

[Journal Article]
Multivariable Automatisierungsentscheidungen : Tool zur Aufwand- und Nutzenbewertung als Entscheidungsgrundlage
In: wt Werkstattstechnik online, 109 (3), 134-139, 2019

Burggräf, Peter
Wagner, Johannes
Dannapfel, Matthias
Müller, Katharina
Koke, Benjamin

[Journal Article]
Prädiktives Risikomanagement in der Produktion : Mit MES Ausschüsse reduzieren und Fertigungsfehler vermeiden
In: Industrie 4.0 Management, 34 (1), 53-56, 2019

Fath, Daniel
Möller, Michael
Kiesel, Raphael
Schmitt, Robert Heinrich
Müller, Tobias

[Contribution to a conference proceedings]
Deviation compensation and resulting part properties in 5-axis milling of bevel gears
In: Conference Papers of the 7th International Conference on Gear and Drivetrain Production GETPRO : 19 - 20 March, 2019 in Würzburg, Germany, 2019

Bieker, Rafael
Solf, Mareike
Löpenhaus, Christoph
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
Influence of the machining strategy on the resulting properties of five-axis hard-milled bevel gears
In: Proceedings of the Institution of Mechanical Engineers / C, 233 (21/22), 7358-7367, 2019
[DOI: 10.1177/0954406219834590]

Solf, Mareike
Bieker, Rafael
Löpenhaus, Christoph
Klocke, Fritz
Bergs, Thomas

[Journal Article]
Application of Hall effect for assessing grinding thermal damage
In: Journal of materials processing technology, 270, 356-364, 2019
[DOI: 10.1016/j.jmatprotec.2019.02.019]

de Oliveira Teixeira, Patricia
Rego, Ronnie Rodrigo
Wagner Pinto, Fabio
de Oliveira Gomes, Jefferson
Löpenhaus, Christoph

[Journal Article]
Increasing productivity of cutting processes by real-time compensation of tool deflection due to process forces
In: Journal of machine engineering, 19 (1), 16-27, 2019
[DOI: 10.5604/01.3001.0013.0443]

Brecher, Christian
Wetzel, Arndt
Berners, Thomas Bernhard
Epple, Alexander

[Book, Dissertation / PhD Thesis]
Adaptive Gestaltung der Organisation von produzierenden Start-ups, XIX, 200 Seiten : Illustrationen, Diagramme, 2019

Walendzik, Pia

[Book, Dissertation / PhD Thesis]
Strategien für Technologieplattformen in diversifizierten Unternehmen, XII, 268 Seiten : Illustrationen, Diagramme, 2019

Ryschka, Simon

[Dissertation / PhD Thesis]
Development of an algorithm for the taktline layout of synchronized job shop production, XVIII, 175 Seiten : Illustrationen, Diagramme, 2019

Fels, Antonia

[Journal Article]
Primärregelleistung durch rückspeisefähige Industrieanlagen : Ein Ansatz zur Befähigung von rückspeisefähigen Industrieanlagen zur Bereitstellung von Primärregelleistung für das Energienetz am Beispiel eines Schwungmassenspeichers einer Netzersatzanlage
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 114 (1/2), 11-15, 2019
[DOI: 10.3139/104.112041]

Brecher, Christian
Kehne, Sebastian
Epple, Alexander

[Contribution to a book, Contribution to a conference proceedings]
Concept for the Design of Agile Product Development Processes
In: Advances in production research : proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / Robert Schmitt, Günther Schuh, editors, 603-610, 2018
[DOI: 10.1007/978-3-030-03451-1_59]

Menges, Alexander
Kantelberg, Jan Erik
Dölle, Christian
Schuh, Günther

[Dissertation / PhD Thesis]
Ausbildung tragfähigkeitssteigernder Grenzschichten in der Zahnradfertigung, vii, 146 Seiten : Illustrationen, Diagramme, 2019

Greschert, René Wolfgang

[Journal Article]
Using servo-drives to optimize the transmission angle of cam mechanisms
In: Mechanism and machine theory, 135, 165-175, 2019
[DOI: 10.1016/j.mechmachtheory.2019.02.001]

Müller, Mario
Hoffmann, M.
Hüsing, Mathias
Corves, Burkhard

[Book, Dissertation / PhD Thesis]
Gestaltung des Digitalen Schattens für Instandhaltungsdienstleistungen im Maschinen- und Anlagenbau, X, II, 281 Seiten : Illustrationen, Diagramme, 2019

Harland, Tobias

[Journal Article]
Experimental investigation of contact heat transfer coefficients in nonisothermal glass molding by infrared thermography
In: Journal of the American Ceramic Society, 102 (4), 2116-2134, 2018
[DOI: 10.1111/jace.16029]

Vu, Anh Tuan
Vu, Anh Ngoc
Liu, Gang
Grunwald, Tim
Dambon, Olaf
et al.

[Report]
New steel grades for deep carburizing of windmill transmission components (DECAWIN) : Final report, 100 Seiten: Illustrationen, Diagramme, 2018
[DOI: 10.2777/12792]

Catteau, Simon D.
Sourmail, Thomas
Elvira, Roberto
Ziegler, Christof
Fayek, Patrick
et al.

[Contribution to a book, Contribution to a conference proceedings]
Fundamental Design Types of Modular Product Platforms
In: 2018 IEEE International Conference on Industrial Engineering & Engineering Management : IEEE IEEM2018 : 16-19 Dec., Bangkok, Thailand / organizers: IEEE TEMS Thailand Chapter, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 1446-1450, 2019
[DOI: 10.1109/IEEM.2018.8607824]

Schuh, Günther
Dölle, Christian
Barg, Sebastian Julian

[Contribution to a book, Contribution to a conference proceedings]
Hybridization of Development Projects Through Process-related Combination of Agile and Plan-driven Approaches
In: 2018 IEEE International Conference on Industrial Engineering & Engineering Management : IEEE IEEM2018 : 16-19 Dec., Bangkok, Thailand / organizers: IEEE TEMS Thailand Chapter, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 602-606, 2019
[DOI: 10.1109/IEEM.2018.8607323]

Riesener, Michael
Dölle, Christian
Ays, Laura Johanna
Ays, Julian Leander

[Journal Article]
Wettbewerb "Excellence in Production" zum Werkzeugbau des Jahres 2019
In: Der Stahlformenbauer, 35 (1), 16-18, 2019

Boos, W.
Kelzenberg, C.
Wiese, J.
Helbig, Jens

[Contribution to a book, Contribution to a conference proceedings]
Efficient Modular Product Platform Design of Mechatronic Systems
In: 2018 IEEE International Conference on Industrial Engineering Engineering Management : IEEE IEEM2018 : 16-19 Dec., Bangkok, Thailand / organizers: IEEE TEMS Thailand Chapter, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 1391-1395, 2019
[DOI: 10.1109/IEEM.2018.8607714]

Schuh, Günther
Dölle, Christian
Barg, Sebastian Julian
Kuhn, Maximilian
Breunig, Stefan Armin Ernst

[Journal Article]
The Effects of Repeated Exposure to Zinc- and Copper-Containing Welding Fumes on Healthy Volunteers
In: Journal of occupational and environmental medicine : JOEM, 61 (1), 8-15, 2019
[DOI: 10.1097/JOM.0000000000001455]

Krabbe, Julia
Beilmann, Viktor
Gerhards, Benjamin
Markert, Agnieszka
Thomas, Katharina
et al.

[Contribution to a book, Contribution to a conference proceedings]
Introducing a Holistic Profitability Model for Additive Manufacturing : An Analysis of Laser-powder Bed Fusion
In: 2018 IEEE International Conference on Industrial Engineering & Engineering Management : IEEE IEEM2018 : 16-19 Dec., Bangkok, Thailand / organizers: IEEE TEMS Thailand Chapter, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 1730-1735, 2019
[DOI: 10.1109/IEEM.2018.8607729]

Piller, Frank Thomas
Poprawe, Reinhart
Schleifenbaum, Johannes Henrich
Schuh, Günther
Barg, Sebastian Julian
et al.

[Journal Article]
Highly iterative technology planning : processing of information uncertainties in the planning of manufacturing technologies
In: Production engineering, 13 (3/4), 361-371, 2019
[DOI: 10.1007/s11740-019-00882-7]

Rey, Jan
Apelt, Sebastian
Trauth, Daniel
Mattfeld, Patrick-Marcel
Bergs, Thomas
et al.

[Contribution to a book, Contribution to a conference proceedings]
Schleifscheibenreinigung beim diskontinuierlichen Profilschleifen von Verzahnungen
In: SCHLEIFTAGUNG 2019; Schleifprozesse: sicher, reproduzierbar, effizient!Grinding processes: safe, reproducible, efficient! 13. - 14. Februar 2019 in Stuttgart-Fellbach, o.S.S., 2019

Bergs, T.
Löpenhaus, C.
Solf, Mareike

[Dissertation / PhD Thesis]
Oberflächenintegrität beim Ultrapräzisionsschleifen transparenter polykristalliner Keramiken, XV, 161 Seiten, Seite A-E : Illustrationen, Diagramme, 2019

Bletek, Thomas Jakob

[Book, Dissertation / PhD Thesis]
Messtechnische Charakterisierung von CFK-Schäden mittels optischer Lock-in-Thermografie, xviii, 153 Seiten : Illustrationen, Diagramme, 2019

Ekanayake, Sarah Indu

[Journal Article]
Genetischer Algorithmus zur Auslegung von Lagereglern
In: Die Antriebstechnik : ANT, 58 (1/2), 38-42, 2019

Brecher, Christian
Berners, Thomas Bernhard
Epple, Alexander

[Book, Dissertation / PhD Thesis]
Methodik zur investitionskosten-neutralen Steigerung der Energieeffizienz von Werkzeugmaschinen, IV, 126 Seiten : Illustrationen, Diagramme, 2019

Jasper, David Michael

[Book, Dissertation / PhD Thesis]
Methodik zur Bestimmung der Nutzenpotenziale von Felddaten cyber-physischer Systeme, XVI, 274 Seiten : Illustrationen, 2019

Kreutzer, Ramon

[Book, Dissertation / PhD Thesis]
Priorisierung technischer Risiken zur Planung der Eigenschaftsabsicherung auf Basis von Unsicherheit, xvi, 182 Seiten : Illustrationen, Diagramme, 2019

Kukulies, Jan

[Contribution to a book, Contribution to a conference proceedings]
Dedicated Agility: A New Approach for Designing Production Networks
In: 2018 IEEE International Conference on Industrial Engineering Engineering Management : IEEE IEEM2018 : 16-19 Dec., Bangkok, Thailand / organizers: IEEE TEMS Thailand Chapter, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 1-5, 2019
[DOI: 10.1109/IEEM.2018.8607608]

Schuh, Günther
Prote, Jan-Philipp
Fränken, Bastian
Ays, Julian Leander
Cremer, Sven Alexander

[Contribution to a book, Contribution to a conference proceedings]
CAD-Model Based Contour Matching of Additively Manufactured Components Using Optical Methods
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / edited by Robert Schmitt, Günther Schuh, 14-23, 2018
[DOI: 10.1007/978-3-030-03451-1_2]

Hoffmann, Nicolai
Pallasch, Christoph Heinrich
Storms, Simon
Herfs, Werner

[Contribution to a book, Contribution to a conference proceedings]
Framework for Designing Production Systems 4.0
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / edited by Robert Schmitt, Günther Schuh, 247-261, 2018
[DOI: 10.1007/978-3-030-03451-1_25]

Liu, Yuan
Prote, Jan-Philipp
Molitor, Marco
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
The Minimal Viable Production System (MVPS) - An Approach for Agile (Automotive) Factory Planning in a Disruptive Environment
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / edited by Robert Schmitt, Günther Schuh, 24-33, 2018
[DOI: 10.1007/978-3-030-03451-1_3]

Bertling, Matthias
Caroli, Hannes
Dannapfel, Matthias
Burggräf, Peter

[Contribution to a book, Contribution to a conference proceedings]
Proactive Complexity Steering for Ramp-up Planning in Assembly
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / edited by Robert Schmitt, Günther Schuh, 198-207, 2018
[DOI: 10.1007/978-3-030-03451-1_20]

Thomas, Katharina
Prote, Jan-Philipp
Dannapfel, Matthias
Deutschmann, Karl
Gützlaff, Andreas
et al.

[Contribution to a book, Contribution to a conference proceedings]
Simulation-Based Planning and Programming System for the Assembly of Products with a Wide Range of Variants in Collaboration Between Worker and Robot
In: Intelligent Human Systems Integration 2019 : Proceedings of the 2nd International Conference on Intelligent Human Systems Integration (IHSI 2019): Integrating People and Intelligent Systems, February 7-10, 2019, San Diego, California, USA / edited by Waldemar Karwowski, Tareq Ahram, 387-392, 2019
[DOI: 10.1007/978-3-030-11051-2_59]

Herfs, Werner
Storms, Simon
Roggendorf, Simon

[Contribution to a book, Contribution to a conference proceedings]
Increasing Accuracy of Material Removal Simulations by Modeling Workpiece Deformation Due to Clamping Forces
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / Robert Schmitt, Günther Schuh Editors, 72-80, 2018
[DOI: 10.1007/978-3-030-03451-1_8]

Knape, Simon
Königs, Michael
Epple, Alexander
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Environment-Integrated Human Machine Interface Framework for Multimodal System Interaction on the Shopfloor
In: Advances in human factors and systems interaction : proceedings of the AHFE 2018 International Conference on Human Factors and Systems Interaction, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA / Isabel L. Nunes, editor, 374-383, 2019
[DOI: 10.1007/978-3-319-94334-3_37]

Schilling, Katrin
Storms, Simon
Herfs, Werner

[Journal Article]
Comparative study on optimization algorithms for online identification of an instantaneous force model in milling
In: The international journal of advanced manufacturing technology, 101 (9/12), 2249-2257, 2018
[DOI: 10.1007/s00170-018-3109-0]

Schwenzer, Max
Auerbach, Thomas
Döbbeler, Benjamin
Bergs, Thomas

[Contribution to a book, Journal Article]
A Framework for the Capture and Analysis of Product Usage Data for Continuous Product Improvement
In: Journal of manufacturing science and engineering, 141 (2), 021010, 2019
[DOI: 10.1115/1.4041948]

Voet, Henning Bernd
Altenhof, Max
Ellerich, Max
Schmitt, Robert Heinrich
Linke, Barbara Sabine

[Contribution to a book, Contribution to a conference proceedings]
A Case for Integrated Data Processing in Large-Scale Cyber-Physical Systems
In: Proceedings of the 52nd Hawaii International Conference on System Sciences (HICSS), Wailea, HI, USA, 7252-7261, 2019
[DOI: 10.24251/HICSS.2019.871]

Glebke, René
Henze, Martin
Wehrle, Klaus
Niemietz, Philipp
Trauth, Daniel
et al.

[Contribution to a book, Contribution to a conference proceedings]
Generic Description of Service-Related Business Models in the Field of Machinery and Plant Engineering
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / Robert Schmitt, Günther Schuh Editors, 763-775, 2018
[DOI: 10.1007/978-3-030-03451-1_73]

Ebi, Manuel
Tittel, Jonas
Dölle, Christian
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
Simulation-Based Planning of Grasping Processes for Assembly Robots
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / edited by Robert Schmitt, Günther Schuh, 228-236, 2018
[DOI: 10.1007/978-3-030-03451-1_23]

Roggendorf, Simon
Ecker, Christian
Storms, Simon
Herfs, Werner

[Contribution to a book, Contribution to a conference proceedings]
Influence of the Grinding Oil on the Grinding Process and on the Running Behaviour of the Workpiece
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / Robert Schmitt, Günther Schuh Editors, 522-531, 2018
[DOI: 10.1007/978-3-030-03451-1_51]

Greschert, René
Brecher, Christian
Löpenhaus, Christoph

[Contribution to a book, Contribution to a conference proceedings]
Product Portfolio Design Using Prescriptive Analytics
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / Robert Schmitt, Günther Schuh Editors, 584-593, 2018
[DOI: 10.1007/978-3-030-03451-1_57]

Jank, Merle-Hendrikje
Dölle, Christian
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
A multi-grain approach for micromechanical contact in grinding
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / Robert Schmitt, Günther Schuh Editors, 371-380, 2018
[DOI: 10.1007/978-3-030-03451-1_37]

de Oliveira Teixeira, Patricia
Löpenhaus, Christoph
Brecher, Christian
Klocke, Fritz

[Contribution to a book, Contribution to a conference proceedings]
Automated and Predictive Risk Assessment in Modern Manufacturing Based on Machine Learning
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / Robert Schmitt, Günther Schuh Editors, 91-100, 2018
[DOI: 10.1007/978-3-030-03451-1_10]

Müller, Tobias
Kiesel, Raphael
Schmitt, Robert Heinrich

[Journal Article]
Temperature calculation in metal substrates during two-photon polymerization
In: Optical materials express, 9 (1), 269-284, 2018
[DOI: 10.1364/OME.9.000269]

Harnisch, Emely Marie
Venek, Tommy
Nohr, Svenja
König, Niels
Schmitt, Robert Heinrich

[Report]
Analyse der Zerspanbarkeit von stranggepressten Zinkknetlegierungen und Entwicklung angepasster Werkzeuge und Bearbeitungsstrategien für das Drehen und Bohren, 2019

Bergs, Thomas
Klocke, Fritz
Baier, Stefan

[Journal Article]
Simulating the benefit of disruption prevention in assembly
In: Journal of modelling in management, 14 (1), 214-231,, 2018
[DOI: 10.1108/JM2-02-2018-0016]

Burggräf, Peter
Wagner, Johannes
Dannapfel, Matthias
Vierschilling, Sebastan Patrick

[Contribution to a book, Contribution to a conference proceedings]
Aligning the Social Perspective with the Technical Vision of the Smart Factory
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / Robert Schmitt, Günther Schuh Editors, 715-729, 2018
[DOI: 10.1007/978-3-030-03451-1_69]

Metzmacher, Amelie Isabel
Hellebrandt, Thomas
Rüßmann, Maximilian
Heine, Ina
Schmitt, Robert Heinrich

[Journal Article]
Influence of hard rolling and the cooling lubricant on the material properties and the rolling strength of PM gears
In: Industrial lubrication & tribology, 71 (3), ILT-06-2018-0247, 2018
[DOI: 10.1108/ILT-06-2018-0247]

Klocke, Fritz
Bergs, Thomas
Löpenhaus, Christoph
Scholzen, Philipp
Frech, Tim

[Book, Proceedings]
Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018
In: 8th Congress of the German Academic Association for Production Technology Aachen 2018-11-19 - 2018-11-20, XII, 785 Seiten : Illustrationen, Diagramme, 2018
[DOI: 10.1007/978-3-030-03451-1]

Schmitt, Robert Heinrich
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
Autonomous Data-Driven Quality Control in Self-learning Production Systems
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 /Robert Schmitt, Günther Schuh Editors, 679-689, 2018
[DOI: 10.1007/978-3-030-03451-1_66]

Schlegel, Peter
Briele, Kristof
Schmitt, Robert Heinrich

[Contribution to a book, Contribution to a conference proceedings]
Conceptional Approach for Process Monitoring Based on an Assistance System for Grinding
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / Robert Schmitt, Günther Schuh Editors, 63-71, 2018
[DOI: 10.1007/978-3-030-03451-1_7]

Kaufmann, Tobias
Stanke, Joachim Patrick Thomas
Trauth, Daniel
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Constitutive Features of Agile and Plan-Driven Processes in Hybrid Product Development
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / Robert Schmitt, Günther Schuh Editors, 477- 486, 2018
[DOI: 10.1007/978-3-030-03451-1_47]

Ays, Laura Johanna
Dölle, Christian
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
Concept for Automated Robot Programming Using Image Processing
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / Robert Schmitt, Günther Schuh Editors, 705-714, 2018
[DOI: 10.1007/978-3-030-03451-1_68]

Wein, Stephan
Wolff, Laura
Malik, Adam
Storms, Simon
Herfs, Werner

[Contribution to a book, Contribution to a conference proceedings]
Energy-Flexible Machine Control Interfaces
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / Robert Schmitt, Günther Schuh Editors, 563-573, 2018
[DOI: 10.1007/978-3-030-03451-1_55]

Fimmers, Christian
Storms, Simon
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Analysis of the Grinding Force in Plunging Bevel Gear Grinding
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / Robert Schmitt, Günther Schuh Editors, 81-90, 2018
[DOI: 10.1007/978-3-030-03451-1_9]

Solf, Mareike
Löpenhaus, Christoph
Bergs, Thomas
Klocke, Fritz

[Contribution to a book, Contribution to a conference proceedings]
Development of a Method to Analyse the Modulus of Elasticity for Gear Grinding Tools
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / edited by Robert Schmitt, Günther Schuh, 457-467, 2018
[DOI: 10.1007/978-3-030-03451-1_45]

Schrank, Maximilian Günter
Löpenhaus, Christoph
Bergs, Thomas
Kiesewetter-Marko, Caroline
Epple, Alexander
et al.

[Contribution to a book, Contribution to a conference proceedings]
Automatic System Identification of Forward Feed Drives in Machine Tools
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / edited by Robert Schmitt, Günther Schuh, 144-152, 2019
[DOI: 10.1007%2F978-3-030-03451-1_15]

Kehne, Sebastian
Berners, Thomas Bernhard
Epple, Alexander
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Tool Monitoring - A Scalable Learning Approach to Estimate Cutting Tool Conditions with Machine-Internal Data in Job Shop Production of a Milling Process
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / edited by Robert Schmitt, Günther Schuh, 110-111, 2019
[DOI: 10.1007/978-3-030-03451-1_11]

Wiesch, Marian
Epple, Alexander
Brecher, Christian

[Journal Article]
Damage detection by double-sided ultrasonic assessment in low-velocity impacted CFRP plates
In: Composite structures, 208, 646-655, 2018
[DOI: 10.1016/j.compstruct.2018.10.025]

Sadeghi, Mohammedzamaan
Nienheysen, Philipp Thomas
Arslan, Süleyman
Dafnis, Athanasios
Silva Marció, Bruno
et al.

[Contribution to a book, Contribution to a conference proceedings]
Investigation of heat flows during the milling processes through infrared thermography and inverse modelling
In: Conference Proceeding on Thermal Issues in Machine Tools : Proceedings 1st Conference on Thermal Issues in Machine Tools; Dresden, 21.-23.03 2018, 2018

Helmig, Thorsten
Augspurger, Thorsten
Frekers, Y.
Döbbeler, B.
Klocke, Fritz
et al.

[Contribution to a book, Contribution to a conference proceedings]
Experimental analysis of the heat flux into the grinding tool in creep feed grinding with CBN abrasives
In: Conference on Thermal Issues in Machine Tools : Proceedings : CIRP Sponsored Conference Dresden 2018 / Technische Universität Dresden, euspen ; Edited by Prof. Dr.-Ing. Steffen Ihlenfeldt, Prof. Dr.-Ing. Christian Brecher, Prof. Dr.-Ing. Matthias Putz, David Billington, 2018

Wrobel, Christian
Trauth, Daniel
Mattfeld, Patrick-Marcel
Klocke, Fritz

[Book, Proceedings]
Conference on Thermal Issues in Machine Tools : Proceedings : CIRP Sponsored Conference Dresden 2018
In: 1st Conference on Thermal Issues in Machine Tools Dresden 2018-03-21 - 2018-03-23, 462 Seiten : Illustrationen, Diagramme, 2018

Ihlenfeldt, Steffen
Brecher, Christian
Putz, Matthias
Billington, David

[Book, Proceedings]
Conference on Thermal Issues in Machine Tools : proceedings : CIRP sponsored conference, Dresden, 2018
In: 1st Conference on Thermal Issues in Machine Tools Dresden 2018-03-21 - 2018-03-23, 452 Seiten : Illustrationen, 2018

Ihlenfeldt, Steffen
Brecher, Christian
Putz, Matthias
Billington, David

[Contribution to a book, Contribution to a conference proceedings]
A new calibration approach for a grey-box model for thermal error compensation of a C-Axis
In: Conference on Thermal Issues in Machine Tools : proceedings : CIRP sponsored conference, Dresden, 2018 / Technische Universität Dresden, Euspen ; edited by: Prof. Dr.-Ing. Steffen Ihlenfeldt, Prof. Dr.-Ing Christian Brecher, Prof. Dr.-Ing. Matthias Putz, David Billington ; TU Dresden, Institut für Werkzeugmachinen und Steuerungstechnik, Chair of Machine Tools Development and Adaptive Controls; Collaborative Research Centre CRC/TR 96, 281-290, 2018

Brecher, Christian
Spierling, Robert
Fey, Marcel

[Journal Article]
PPS-Report 2017/2018: Ergebnisse einer gemeinsamen Studie der produktionstechnischen Institute IFA, IPMT, Fraunhofer IGCV und WZL
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 113 (12), 840-844, 2018
[DOI: 10.3139/104.112017]

Seitz, Meissa
Härtel, Lasse
Hübner, Marco
Merkel, Lukas
be Isa, Johannes
et al.

[Contribution to a conference proceedings, Journal Article]
Influence of cooling nozzle orientation on the machinability of TiAl6V4 and 42CrMo4+QT in rough milling
In: Procedia CIRP, 77, 66-69, 2018

Klocke, Fritz
Döbbeler, Benjamin
Lakner, Thomas

[Contribution to a conference proceedings, Journal Article]
Influence of cooling nozzle orientation on the machinability of TiAl6V4 and 42CrMo4+QT in rough milling
In: Procedia CIRP, 77, 66-69, 2018
[DOI: 10.1016/j.procir.2018.08.217]

Klocke, Fritz
Döbbeler, Benjamin
Lakner, Thomas

[Contribution to a conference proceedings]
Kenngrößen zur Auslegung des Wälzschälprozesses mit dem Taschenrechner
In: Aktuelle Entwicklung beim Vorverzahnen : Seminar 7-8. Nov 2018, Aachen, 18-1-18-27, 2018

Georgoussis, Adrianos
Löpenhaus, Christoph
Bergs, Thomas

[Contribution to a conference proceedings]
In-process integration of fibre optical sensors for structural condition monitoring of braided composite shaft
In: [Smart Materials and Surfaces 2018, SMS 2018, 2018-10-23 - 2018-10-25, Venice, Italy], 1-9, 2018
[DOI: 10.26799/cp-sms-egf-nanomed2018]

Bareiro, Oscar
Preisler, Andreas
Drichel, Pascal
Ackermann, Philippe
Schröder, Kai-Uwe
et al.

[Contribution to a book, Contribution to a conference proceedings]
Cluster Analysis for Enhancing Process Quality in Jobshop Production
In: IRF2018 : proceedings of the 6th International Conference on Integrity-Reliability-Failure : (Lisbon/Portugal, 22-26 July 2018) / editors: J.F. Silva Gomes and Shaker A. Meguid, Paper Ref: 7283, 1413-1422, 2018

Fels, Antonia
Ellerich, Max
Schmitt, Robert Heinrich

[Contribution to a book]
Entwicklung von elektrofahrzeugspezifischen Systemen
In: Elektromobilität : Grundlagen einer Zukunftstechnologie / Achim Kampker, Dirk Vallée, Armin Schnettler Hrsg., 279-386, 2018
[DOI: 10.1007/978-3-662-53137-2_6]

Röth, Thilo
Kampker, Achim
Deutskens, Christoph
Kreisköther, Kai Denis
Heimes, Heiner Hans
et al.

[Contribution to a book, Contribution to a conference proceedings]
Risikomodell zur Abschätzung des intraoperativen Verletzungsrisikos an der lateralen Schädelbasis
In: CURAC 2018 - Tagungsband : 17. Jahrestagung der Deutschen Gesellschaft für Computer- und Roboterassistierte Chirurgie e.V. : 13.-15. September 2018, Leipzig / Herausgeber: Thomas Neumuth, Andreas Melzer, Claire Chalopin ; Redaktion: Kathrin Scholz, 43-50, 2018

Voigtmann, Christoph Michael
Bredemann, Judith
Knott, Anna-Lena
Schmitt, Robert Heinrich
Stenin, I.
et al.

[Contribution to a book, Contribution to a conference proceedings]
Cutting Power Estimation via External Voltage and Current Sensors on Feed-Drive Axis for the Straight Milling Process
In: 6th CIRP Global Web Conference : Envisaging the future manufacturing, design, technologies and systems in innovation era (CIRPe 2018) / edited by Alessandro Simeone, Paolo Claudio Priarone, 323-328, 2018
[DOI: 10.1016/j.procir.2018.09.068]

Miura, Kazumasa
Döbbeler, Benjamin
Klocke, Fritz

[Contribution to a book, Contribution to a conference proceedings]
Identification of haptic exploration procedures over textile surfaces with a Leap Motion Controller
In: DS 91: Proceedings of NordDesign 2018, Linköping, Sweden, 14th - 17th August 2018 / Editor: Ekströmer, Philip; Schütte, Simon and Ölvander, Johan, 11 Seiten, 2018

Gussen, Lars C.
Ellerich, Max
Schmitt, Robert Heinrich

[Journal Article]
Reifegradmanagement zur Messung der Produktqualität in der Entwicklung
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 113 (11), 734-737, 2018
[DOI: 10.3139/104.112009]

Klauke, Alexandra
Fleischer, Karsten
Schmitt, Robert Heinrich
Vollmer, Thomas
Permin, Eike

[Journal Article]
Implementierte Industrie
In: Return : Magazin für Transformation und Turnaround, 5 (4), 36-37, 2018
[DOI: 10.1007/s41964-018-0129-2]

Schmitt, Robert Heinrich
Kiesel, Raphael
Vollmer, Thomas

[Journal Article]
6 steps to EN 9100 certification
In: Aerospace manufacturing, 11, 82-88, 2018

Vollmer, Thomas
Bünck, Matthias
Niedermeyer, Angela Monika
Schulte, Tobias
Schmitt, Robert Heinrich

[Journal Article]
Normgerecht im Flugzeugbau : Systematisch zur Zertifizierung nach EN 9100
In: Mobiles : Fachzeitschrift für Konstrukteure, 43, 64, 2018

Vollmer, Thomas
Massonet, Angela
Schmitt, Robert Heinrich
Bünck, Matthias

[Journal Article]
Ohne Turbulenzen ins Audit : In sechs Schritten zum zertifizierten Zulieferer nach EN 9100
In: Qualität und Zuverlässigkeit : QZ, 63 (6), 32-35, 2018

Vollmer, Thomas
Schmitt, Robert Heinrich
Bünck, Matthias

[Book]
Ressourceneffizienz-Wertstrom : einfach Ressourcenströme reduzieren, 104 Seiten : Illustrationen, Diagramme, 2018
[DOI: 10.24406/IPT-N-506890]

Vollmer, Thomas
Kerkhoff, Johannes
Große Böckmann, Markus
Permin, Eike
Schmitt, Robert Heinrich

[Contribution to a book, Contribution to a conference proceedings]
Investigation of heat flows during the milling processes through infrared thermography and inverse modelling
In: Conference on Thermal Issues in Machine Tools : proceedings : CIRP sponsored conference, Dresden, 2018 / Technische Universität Dresden, Euspen ; edited by: Prof. Dr.-Ing. Steffen Ihlenfeldt, Prof. Dr.-Ing Christian Brecher, Prof. Dr.-Ing. Matthias Putz, David Billington ; TU Dresden, Institut für Werkzeugmachinen und Steuerungstechnik, Chair of Machine Tools Development and Adaptive Controls; Collaborative Research Centre CRC/TR 96, 257-268, 2018

Helmig, Thorsten
Augspurger, Thorsten
Frekers, Y.
Döbbeler, B.
Klocke, Fritz
et al.

[Journal Article]
Heat flow into the tool in cutting super alloy Inconel 718
In: Journal of mechanics engineering and automation, 8 (1), 1-8, 2018
[DOI: 10.17265/2159-5275/2018.01.001]

Augspurger, Thorsten
Peng, Bingxiao
Klocke, Fritz
Döbbeler, Benjamin

[Journal Article]
Untersuchung des thermischen Einflusses der Späne auf die Werkzeugmaschine
In: Unter Span, 2018 (1), 24-25, 2018

Klocke, Fritz
Brecher, Christian
Augspurger, Thorsten
Spierling, Robert
Döbbeler, B.
et al.

[Contribution to a book, Contribution to a conference proceedings]
A Framework for Assessing and Characterizing Cellular Production Structures
In: 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 19-21 July 2017, Gulf of Naples, Italy / Edited by Roberto Teti, Doriana M. D'Addona, 2018

Schuh, Günther
Prote, Jan-Philipp
Luckert, Melanie
Ernst, Jakob

[Contribution to a book, Contribution to a conference proceedings]
Process quality improvement through collaboration in synchronized individual production companies
In: 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 19-21 July 2017, Gulf of Naples, Italy / Edited by Roberto Teti, Doriana M. D'Addona, 2018

Elser, Hannes
Fimmers, Christian
Groggert, Sebastian
Schmitt, Robert Heinrich
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Optimisation of the number of projections in industrial X-ray computed tomography for dimensional measurements on multimaterial workpieces
In: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology : June 4th-8th June 2018, Venice, IT / editors: D. Billington, R.K. Leach, D. Phillips, O. Riemer, E. Savio ; published by: euspen, 165-166, 2018

Grozmani, Natalia
Buratti, Andrea
Schmitt, Robert Heinrich

[Book, Proceedings]
Customization 4.0 : Proceedings of the 9th World Mass Customization & Personalization Conference (MCPC 2017), Aachen, Germany, November 20th-21st, 2017
In: 9th World Mass Customization Personalization Conference Aachen 2017-11-20 - 2017-11-21, 717, 2018
[DOI: 10.1007/978-3-319-77556-2]

Hankammer, Stephan
Nielsen, Kjeld
Piller, Frank Thomas
Schuh, Günther
Wang, Ning

[Contribution to a book, Contribution to a conference proceedings]
Potentials of Free Root Fillets in Planetary Gearbox Applications
In: American Gear Manufacturers Association Fall Technical Meeting : 2018 Oak Brook, Illinois, USA, 24 - 26 September 2018, 214-230, 2018

Pollaschek, Jonas
Brecher, Christian
Löpenhaus, Christoph

[Journal Article]
Fit für die digitale Transformation: Der Blended Learning-Lehrgang "Digital Manager Industrie"
In: Wissenschaft trifft Praxis, 4 (11), 71-76, 2018

Baskaya, Sait
Budeus, Nazanin
Pivit, Rainer

[Contribution to a book, Contribution to a conference proceedings]
Gestaltung Agiler Produktentwicklungsprozesse
In: [Design for X Symposium 2018, 29. DfX-Symposium, 2018-09-25 - 2018-09-26, Tutzing, Germany], 95-106, 2018

Schuh, Günther
Dölle, Christian
Menges, Alexander
Kantelberg, Jan Erik

[Book, Dissertation / PhD Thesis]
Polarity-dependent removal interferences in sink EDM of titanium alloys, V, 141 Seiten : Illustrationen, Diagramme, 2018

Holsten, Maximilian Alexander

[Contribution to a book, Contribution to a conference proceedings]
An Approach for Rolling Planning of Migration in Production Networks
In: 2018 IEEE International Conference on Industrial Engineering & Engineering Management : IEEE IEEM2018 : 16-19 Dec., Bangkok, Thailand / organizers: IEEE TEMS Thailand Chapter, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 17-21, 2018
[DOI: 10.1109/IEEM.2018.8607294]

Schuh, Günther
Prote, Jan-Philipp
Molitor, Marco
Cremer, Sven Alexander

[Contribution to a book, Contribution to a conference proceedings]
Flow Chart Based Information Modeling for Factory Planning
In: 51st CIRP Conference on Manufacturing Systems / edited by Lihui Wang, 410-415, 2018
[DOI: 10.1016/j.procir.2018.03.259]

Bejjani, Chadi
Utsch, Julian Steffen
Thiele, Thomas David
Meisen, Tobias
Jeschke, Sabina
et al.

[Contribution to a book, Contribution to a conference proceedings]
Process Planning Assessment Framework
In: Advances in production management systems : smart manufacturing for industry 4.0 : IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018 : proceedings / Ilkyeong Moon, Gyu M. Lee, Jinwoo Park, Dimitris Kiritsis, Gregor von Cieminski (eds.). - Part 1: Production management for data-driven, intelligent, collaborative, and sustainable manufacturing, 473-481, 2018
[DOI: 10.1007/978-3-319-99704-9_58]

Schuh, Günther
Prote, Jan-Philipp
Hünnekes, Philipp

[Contribution to a book, Contribution to a conference proceedings]
Development of a Methodology to Design Product Portfolios in Accordance to Corporate Goals Using an Evolutionary Algorithm
In: 2018 IEEE International Conference on Industrial Engineering & Engineering Management : IEEE IEEM2018 : 16-19 Dec., Bangkok, Thailand / organizers: IEEE TEMS Thailand Chapter, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 1466-1470, 2018
[DOI: 10.1109/IEEM.2018.8607559]

Riesener, Michael
Dölle, Christian
Schmitt, Lukas
Jank, Merle-Hendrikje

[Journal Article]
Digitalisierung verstehen und erleben : So nehmen Unternehmen ihre Mitarbeiter in der digitalen Transformation mit
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 113 (10), 681-685, 2018
[DOI: 10.3139/104.111991]

Schuh, Günther
Mühlbradt, Thomas
Prote, Jan-Philipp
Gützlaff, Andreas
Ays, Julian Leander
et al.

[Journal Article]
Kontextbezogene Auslegung von Produktbaukästen
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 113 (12), 810-813, 2018
[DOI: 10.3139/104.112029]

Schuh, Günther
Barg, Sebastian Julian
Dölle, Christian
Menges, Alexander

[Contribution to a conference proceedings, Journal Article]
Urban factories: Industry insights and empirical evidence within manufacturing companies in German-speaking countries
In: Procedia manufacturing, 28, 83-89, 2018
[DOI: 10.1016/j.promfg.2018.12.014]

Burggräf, Peter
Dannapfel, Matthias
Uelpenich, Jerome
Kasalo, Mateo

[Journal Article]
How to excel : Compare, compile, conduct
In: European tool & mould making : ETMM, 20 (9), 18-21, 2018

Boos, Wolfgang
Salmen, Michael
Stark, Peter Maximilian
Stracke, Felix Konstantin

[Journal Article]
Zeit- und kostenoptimierter Serienanlauf von Werkzeugen : Digitale Prozessunterstützung zur Reduktion des Aufwands und der Durchlaufzeit von Korrekturschleifen
In: wt Werkstattstechnik online, 108 (11/12), 796-81, 2018

Schuh, Günther
Kelzenberg, Christoph Maximilian Bernd
Wiese, Jan-Hendrik
Stracke, Felix Konstantin

[Contribution to a book, Contribution to a conference proceedings]
Analyse der Randzoneneigenschaften eines 100Cr6 Wälzlagerrings in Abhängigkeit der Prozesskraft beim maschinellen Oberflächenhämmern
In: Reibung, Schmierung und Verschleiß: Forschung und praktische Anwendungen, 59. Tribologie Fachtagung, 24.-26. September 2018, Göttingen. - Band 1: Junge Tribologen "How Tribology grows", tribologische Systeme, Tribometrie, Werkstoffe & Werkstofftechnologien, Maschinenelemente & Antriebstechnik, Sport, Förderpreise/Werner-Stehr-Preis / GfT Gesellschaft für Tribologie e.V., 28, 2018

Mannens, Robby Norbert
Hild, Rafael
Trauth, Daniel
Mattfeld, Patrick-Marcel
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Untersuchungen zur Existenz von Ermüdungs- und Restbruchzonen bei Grübchenschäden
In: Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen : 59. Tribologie-Fachtagung 24. September bis 26. September 2018 in Göttingen / GfT Gesellschaft für Tribologie e.V. - Band 1: Junge Tribologen "How Tribology grows", tribologische Systeme, Tribometrie, Werkstoffe & Werkstofftechnologien, Maschinenelemente & Antriebstechnik, Sport, Förderpreise, Werner-Stehr-Preis / 59. Tribologie-Fachtagung, 05/1-05/11, 2018

Brecher, Christian
Löpenhaus, Christoph
Goergen, Fabian
Mevissen, Dieter

[Journal Article]
Influence of the grinding process on the tribological behavior of gear analogy test parts
In: Industrial lubrication & tribology, 71 (8), 991-996, 2018
[DOI: 10.1108/ILT-04-2018-0157]

Brecher, Christian
Löpenhaus, Christoph
Greschert, René

[Contribution to a book, Contribution to a conference proceedings]
Einflussanalyse von langwelligen Abweichungen auf das Anregungsverhalten von Getrieben für Elektrofahrzeuge
In: SMK 2018, Schweizer Maschinenelemente Kolloquium : 27. und 28. November 2018 : Tagungsband / KISSsoft AG (Hrsg.), 219-230, 2018

Ahmad, Mubarik
Brecher, Christian
Löpenhaus, Christoph

[Contribution to a book, Contribution to a conference proceedings]
Experimental study on the pitting detection capabilities for spur gears using acoustic emission and vibration analysis methods
In: Fall Technical Meeting AGMA 2018, 24.09.2018 - 26.09.2018, Oak Brook, Chicago/ USA, 18FTM10, 2018

Grzeszkowski, Mateusz
Gühmann, Clemens
Scholzen, Philipp
Löpenhaus, Christoph
Nowoisky, Sebastian
et al.

[Book]
Intelligente Werkzeuge und datenbasierte Geschäftsmodelle, 2018

Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Wiese, Jan-Hendrik
Stracke, Felix Konstantin
Ebbecke, Christoph Wilhelm
et al.

[Journal Article]
Industry 4.0 implementation framework for the producing industry
In: Journal of advances in technology and engineering research, 4 (2), 79-90, 2018
[DOI: 10.20474/jater-4.2.4]

Schuh, Günther
Kelzenberg, Christoph Maximilian Bernd
Wiese, Jan-Hendrik
Stracke, Felix Konstantin

[Journal Article]
Partner auf Augenhöhe
In: Werkzeug & Formenbau, 27 (2), 52-55, 2018

Boos, W.
Stark, Maximilian
Stracke, Felix Konstantin

[Contribution to a book, Contribution to a conference proceedings]
Factory-BIM zur integrierten Produktions- und Gebäudeplanung
In: Smart Produktion und digitale Vernetzung; Fachtagung - Vernetzt planen und produzieren VPP2018, Chemnitz, 29.10.2018, 155-166, 2018

Burggräf, Peter
Ebade-Esfahani, Matthias
Bertling, Matthias
Dannapfel, Matthias

[Contribution to a book, Contribution to a conference proceedings]
Achieving Process Efficiency and Stability in Serial Production Through an Innovative Service System Based on Predictive Maintenance
In: Advances in Production Research : Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018 / edited by Robert Schmitt, Günther Schuh, 657-666, 2018
[DOI: 10.1007/978-3-030-03451-1_64]

Busch, Max
de Lange, Johan
Kelzenberg, Christoph Maximilian Bernd
Schuh, Günther

[Contribution to a book, Contribution to a conference proceedings]
Approach for Zero Defect Manufacturing : Geometric Calibration of Five-Axis Machine Tools for Blisk Manufacturing Process
In: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition - 2018 : presented at the ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, June 11-15, 2018, Oslo, Norway / sponsored by the International Gas Turbine Institute. - Volume 6: Ceramics; controls, diagnostics and instrumentation; education; manufacturing materials and metallurgy, GT2018-77195, V006T24A026, 7 Seiten, 2018
[DOI: 10.1115/GT2018-77195]

Lee, Tae Hun
Behrens, Jan
Gierlings, Sascha
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Phase Field Modeling of the Microstructure Evolution in a Steel Workpiece under High Temperature Gradients
In: 4th CIRP Conference on Surface Integrity (CSI 2018) / Edited by Fengzou Fang, 99-104, 2018

Klocke, Fritz
Mohammadnejad, Mehnoush
Heß, Raphael
Harst, Simon Christoph
Klink, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Model-based Productivity Analysis of Wire EDM for the Manufacturing of Titanium
In: 8th CIRP Conference on High Performance Cutting (HPC 2018), 594-597, 2018

Klocke, Fritz
Welschof, Lukas
Herrig, Tim
Klink, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Technological and Economical Assessment of Alternative Process Chains for Turbocharger Impeller Manufacture
In: 8th CIRP Conference on High Performance Cutting (HPC 2018) / Edited by László Monostori, Gabor Stepan, Dániel Bachrathy, 586-589, 2018

Klink, Andreas
Hlavac, Marcus
Herrig, Tim
Holsten, Maximilian Alexander

[Contribution to a book, Contribution to a conference proceedings]
Comparison of material specific rim zone effects of Ti6Al4V machined by wire EDM in water- and CH- based dielectrics
In: 4th CIRP Conference on Surface Integrity (CSI 2018) / Edited by Fengzou Fang, 238-243, 2018

Klocke, Fritz
Smeets, Gregor Gabriel
Kittel, Mario
Olivier, Marcel Christoph
Hama-Saleh, Rebar
et al.

[Book, Proceedings]
Industrie 4.0 - Wertschöpfungspotenziale in der dienstebasierten Produktion : Berichte zum aktuellen Stand der Forschung aus dem WZL (RWTH Aachen), dem PTZ (Produktionstechnisches Zentrum Berlin) und dem ISW (Universität Stuttgart) : ABS-Treffen 2017 Universität Stuttgart
In: Industrie 4.0 - Wertschöpfungspotenziale in der dienstebasierten Produktion Stuttgart, V, 86 Seiten : Illustrationen, Diagramme, 2018

Brecher, Christian
Krüger, Jörg
Uhlmann, Eckart
Verl, Alexander
Riedel, Oliver
et al.

[Dissertation / PhD Thesis]
Thermal analysis of the milling process, VIII, 157 Seiten : Illustrationen, Diagramme, 2018

Augspurger, Thorsten

[Journal Article]
Integrierte Produktionsplanung in der Prozessindustrie
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 113 (12), 795-798, 2018
[DOI: 10.3139/104.112015]

Schuh, Günther
Kelzenberg, Christoph Maximilian Bernd
de Lange, Johan
Busch, Max
Möller, Tom

[Book, Dissertation / PhD Thesis]
Kontinuierliche Herstellung von miniaturisierten Endlosprofilen aus thermoplastischen Faserverbundkunststoffen, X, 141 Seiten : Illustrationen, Diagramme, 2018

Brack, Alexander

[Book]
Fertigungsverfahren, XIV, 682 Seiten : Illustrationen, Diagramme, 2018
[DOI: 10.1007/978-3-662-54207-1]

Klocke, Fritz

[Journal Article]
Hochdruckkühlung - produktiv und sicher : Mit pulsierender Kühlschmierstoffzufuhr zur gewünschten Spanlänge
In: Maschinen, Anlagen, Verfahren : mav, 62 (10), 92-94, 2018

Bergs, Thomas
Döbbeler, Benjamin
Splettstößer, Antonia

[Journal Article]
Powder Metal Gears for Highly Loaded Powertrains: How Powder Metallurgy Supports Current Trends in Transmission Technology
In: SAE international journal of materials and manufacturing, 11 (4), 431-440, 2018
[DOI: 10.4271/2018-01-0989]

Frech, Tim
Scholzen, Philipp
Löpenhaus, Christoph
Klocke, Fritz

[Contribution to a book, Contribution to a conference proceedings]
Tool-based inverse determination of material model of Direct Aged Alloy 718 for FEM cutting simulation
In: 8th CIRP Conference on High Performance Cutting (HPC 2018) / Edited by László Monostori, Gabor Stepan, Dániel Bachrathy, 54-57, 2018
[DOI: 10.1016/j.procir.2018.08.211]

Klocke, Fritz
Döbbeler, Benjamin
Peng, Bingxiao
Schneider, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Tool-based inverse determination of material model of Direct Aged Alloy 718 for FEM cutting simulation
In: 8th CIRP Conference on High Performance Cutting (HPC 2018) / Edited by László Monostori, Gabor Stepan, Dániel Bachrathy, 54-57, 2018

Klocke, Fritz
Döbbeler, Benjamin
Peng, Bingxiao
Schneider, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Innovative Zuführung kryogener Medien kombiniert mit Minimalmengenschmierung zur Produktivitätssteigerung beim Fräsen
In: 7. Aachener High-Performance-Cutting (HPC) Konferenz : 23.-24. Oktober 2018 / Thomas Bergs, Fritz Klocke, Benjamin Döbbeler (Hrsg.), 315-329, 2018

Koch, Norbert Matthias

[Contribution to a book, Contribution to a conference proceedings]
Influence of Impact Force, Impact Angle, and Stroke Length in Machine Hammer Peening on the Surface Integrity of the Stainless Steel X3CrNiMo13-4
In: 4th CIRP Conference on Surface Integrity (CSI 2018) / Edited by Fengzou Fang, 166-171, 2018

Mannens, Robby Norbert
Trauth, Daniel
Mattfeld, Patrick-Marcel
Klocke, Fritz

[Contribution to a book, Contribution to a conference proceedings]
Investigation on Wire-EDM Finishing of Titanium Nitride Doped Silicon Nitride in CH-based Dielectrics
In: 8th CIRP Conference on High Performance Cutting (HPC 2018) / Edited by László Monostori, Gabor Stepan, Dániel Bachrathy, 650-653, 2018

Klocke, Fritz
Olivier, Marcel Christoph
Degenhardt, U.
Herrig, Tim
Tombul, Ugur
et al.

[Journal Article]
Ottimizzazione del comportamento vibro-acustico di ingranaggi in materiali alternativi
In: Organi di trasmissione, 48 (2), 28-34, 2018

Brecher, Christian
Löpenhaus, Christoph
Schroers, Marius Gregor
Frech, Tim
Scholzen, Philipp

[Journal Article]
Ingranaggi Beveloid: Il potenziale delle modifiche libere del fianco
In: Organi di trasmissione, 48 (8), 26-30, 2018

Brecher, Christian
Löpenhaus, Christoph
Brimmers, Jens

[Journal Article]
Prozesskraftmessung mit spindelintegrierter Sensorik
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 113 (10), 660-663, 2018
[DOI: 10.3139/104.111982]

Brecher, Christian
Eckel, Hans-Martin
Fey, Marcel
Butz, Felix

[Journal Article]
Reduction of the tonality of gear noise by application of topography scattering
In: Applied acoustics, 148, 344-359, 2018
[DOI: 10.1016/j.apacoust.2018.12.039]

Geradts, Peter
Brecher, Christian
Löpenhaus, Christoph
Kasten, Marcel-Michél

[Journal Article]
Verfahren zur Messung des rotatorischen Nachgiebigkeitsverhaltens
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 113 (12), 824-828, 2018
[DOI: 10.3139/104.112021]

Brecher, Christian
Bergs, Thomas
Kiesewetter-Marko, Caroline
Schrank, Maximilian Günter
Epple, Alexander
et al.

[Report]
Abschlussbericht zum Verbundprojekt: Funkenerosive (EDM) und elektrochemische (ECM) Hochleistungsendbearbeitung von feingegossenen und generativ hergestellten Turbolader-Turbinenrädern aus Gamma-Titanaluminid für den Automobilbau - "ETurbo" : Laufzeit des Vorhabens: 01.08.2014-31.10.2017, 39 Blätter : Illustrationen, Diagramme, 2018
[DOI: 10.2314/GBV:102514788X]

Hlavac, Marcus
Gmelin, Thomas
Schwade, Max
Klatt, Andreas
Kehr, Ann-Kirstin
et al.

[Contribution to a book, Contribution to a conference proceedings]
Analysis of side gap phenomena in ECM manufacturing for gear geometries in turbine shafts
In: Proceedings of the 14th INSECT 2018 : International Symposium on ElectroChemical Machining Technology 2018 : Aachen, November 27-28, 2018 / Thomas Bergs, Tim Herrig, Simon Harst, Andreas Klink (eds.), 185-191, 2018

Bergs, Thomas
Smeets, Gregor Gabriel
Petzoldt, Andreas
Harst, Simon Christoph
Klink, Andreas

[Journal Article]
Automated Root Cause Analysis of Non-Conformities with Machine Learning Algorithms
In: Journal of machine engineering, 18 (4), 60-72, 2018
[DOI: 10.5604/01.3001.0012.7633]

Müller, Tobias
Greipel, Jonathan Simon
Weber, Tobias
Schmitt, Robert Heinrich

[Contribution to a book, Contribution to a conference proceedings]
Return on CPS (RoCPS): An Evaluation Model to Assess the Cost Effectiveness of Cyber-Physical Systems for Small and Medium-Sized Enterprises
In: Managing technological entrepreneurship: the engine for economic growth : PICMET'18 : Portland International Conference on Management of Engineering and Technology / editor: Dundar F. Kocaoglu ; co-editors: Timothy R. Anderson, Dilek Cetindamar Kozanoglu, Kiyoshi Niwa, Harm-Jan Steenhuis, Gary Perman ; organized by: Portland State University, Department of Engineering Technology Management ; sponsored by: IEEE TEMS (Technology and Engineering Management Society), InFocus Corporation, Portland State University Foundation, Search Technology/Vantage Point, 1805-1813, 2018
[DOI: 10.23919/PICMET.2018.8481980]

Burggräf, Peter
Dannapfel, Matthias
Bertling, Matthias
Xu, Tingni

[Contribution to a conference proceedings, Journal Article]
Analysis of Characteristic Process Parameters to Identify Unstable Process Conditions during Wire EDM
In: Procedia manufacturing, 2018 (18), 138-145, 2018
[DOI: 10.1016/j.promfg.2018.11.018]

Bergs, Thomas
Tombul, Ugur
Herrig, Tim
Olivier, Marcel Christoph
Klink, Andreas
et al.

[Contribution to a conference proceedings, Journal Article]
Experimental Analysis of Influence of Discharge Current, Pulse Interval Time and Flushing Conditions on WEDM Performance
In: Procedia manufacturing, 2018 (18), 130-137, 2018
[DOI: 10.1016/j.promfg.2018.11.017]

Bergs, Thomas
Tombul, Ugur
Herrig, Tim
Klink, Andreas
Klocke, Fritz

[Contribution to a book, Contribution to a conference proceedings]
Surface structure, pore characteristics and mechanical response of aluminum foam processed by wire-EDM and milling
In: 5th International Conference of Engineering Against Failure (ICEAF-V 2018) : Chios, Greece, June 20-22, 2018 / S. Pantelakis and S. Koubias (eds.), 03012, 8 Seiten, 2018
[DOI: 10.1051/matecconf/201818803012]

Michailidis, Nikolasos
Klink, Andreas
Smyrnaios, E.
Olivier, Marcel Christoph
Baklatzoglou, Nearchos
et al.

[Contribution to a book, Journal Article]
Meeting Manufacturing Tolerances with FE-based design
In: Gear solutions, 15 (May), 49-59, 2018

Brecher, Christian
Löpenhaus, Christoph
Theling, Julian Anselm
Schroers, Marius Gregor
Piel, Daniel

[Contribution to a conference proceedings, Journal Article]
Evaluation of Contemporary Wire EDM for the Manufacture of Highly Loaded Titanium Parts for Space Applications
In: Procedia manufacturing, 2018 (18), 146-151, 2018
[DOI: 10.1016/j.promfg.2018.11.019]

Klocke, Fritz
Welschof, Lukas
Herrig, Tim
Klink, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Influence of the Number of Teeth on the Dynamic Excitation Behavior of Two-Stage Cylindrical Gearboxes
In: Gear Conference 2018 - Volume II, Lyon, France, 27- 29 August 2018, 725-735, 2018

Brecher, Christian
Löpenhaus, Christoph
Schroers, Marius Gregor

[Journal Article]
Schwingungsinteraktion benachbarter Zahneingriffe: Einfluss von Wechselwirkungen auf Rotationsabweichungen im Maschinenantrieb
In: wt Werkstattstechnik online, 108 (5), 289-294, 2018

Brecher, Christian
Löpenhaus, Christoph
Schroers, Marius Gregor

[Book]
Tooling in Czech Republic, 2018

Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Wiese, Jan-Hendrik
Goertz, David

[Contribution to a book, Contribution to a conference proceedings]
Evaluation of different short-cut methods for the simulation of PECM processes
In: Proceedings of the 14th INSECT 2018 : International Symposium on ElectroChemical Machining Technology 2018 : Aachen, November 27-28, 2018, 131-138, 2018

Bergs, Thomas
Heidemanns, Lukas Franz
Harst, Simon Christoph
Klink, Andreas
Klocke, Fritz

[Contribution to a conference proceedings, Journal Article]
Surface integrity and economical assessment of alternative manufactured profiled grooves in a nickel-based alloy
In: Procedia manufacturing, 2018 (18), 112-119, 2018
[DOI: 10.1016/j.promfg.2018.11.015]

Bergs, Thomas
Smeets, Gregor Gabriel
Seimann, Martin Albert
Döbbeler, Benjamin
Klink, Andreas
et al.

[Contribution to a book, Contribution to a conference proceedings]
Comparison of material specific rim zone effects of Ti6Al4V machined by wire EDM in water- and CH- based dielectrics
In: 4th CIRP Conference on Surface Integrity (CSI 2018) / Edited by Fengzou Fang, 238-243, 2018
[DOI: 10.1016/j.procir.2018.05.064]

Klocke, Fritz
Smeets, Gregor Gabriel
Kittel, Mario
Olivier, Marcel Christoph
Hama-Saleh, Rebar
et al.

[Contribution to a book, Contribution to a conference proceedings]
High Speed Wire EDM flushing approach for wire electrochemical machining
In: Proceedings of the 14th INSECT 2018 : International Symposium on ElectroChemical Machining Technology 2018 : Aachen, November 27-28, 2018, 55-62, 2018

Herrig, Tim
Oßwald, Kai
Lochmahr, Ingo
Klink, Andreas
Klocke, Fritz
et al.

[Contribution to a book, Contribution to a conference proceedings]
Technological and Economical Assessment of Alternative Process Chains for Turbocharger Impeller Manufacture
In: 8th CIRP Conference on High Performance Cutting (HPC 2018) / Edited by László Monostori, Gabor Stepan, Dániel Bachrathy, 586-589, 2018
[DOI: 10.1016/j.procir.2018.08.212]

Klink, Andreas
Hlavac, Marcus
Herrig, Tim
Holsten, Maximilian Alexander

[Contribution to a book, Contribution to a conference proceedings]
Model-based Productivity Analysis of Wire EDM for the Manufacturing of Titanium
In: 8th CIRP Conference on High Performance Cutting (HPC 2018), 594-597, 2018
[DOI: 10.1016/j.procir.2018.08.209]

Klocke, Fritz
Welschof, Lukas
Herrig, Tim
Klink, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Phase Field Modeling of the Microstructure Evolution in a Steel Workpiece under High Temperature Gradients
In: 4th CIRP Conference on Surface Integrity (CSI 2018) / Edited by Fengzou Fang, 99-104, 2018
[DOI: 10.1016/j.procir.2018.05.079]

Klocke, Fritz
Mohammadnejad, Mehnoush
Heß, Raphael
Harst, Simon Christoph
Klink, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Investigation on the Electrochemical Machinability of High Entropy Alloys
In: Proceedings of the 14th INSECT 2018 : International Symposium on Electrochemical Machining Technology 2018 : Aachen, November 27-28, 2018 / Thomas Bergs, Tim Herrig, Simon Harst, Andreas Klink (Eds.), 25-32, 2018

Harst, Simon Christoph
Su, Jing
Li, Zhiming
Klink, Andreas
Klocke, Fritz
et al.

[Contribution to a book, Contribution to a conference proceedings]
Investigation on Wire-EDM Finishing of Titanium Nitride Doped Silicon Nitride in CH-based Dielectrics
In: 8th CIRP Conference on High Performance Cutting (HPC 2018) / Edited by László Monostori, Gabor Stepan, Dániel Bachrathy, 650-653, 2018
[DOI: 10.1016/j.procir.2018.08.185]

Klocke, Fritz
Olivier, Marcel Christoph
Degenhardt, U.
Herrig, Tim
Tombul, Ugur
et al.

[Contribution to a book, Contribution to a conference proceedings]
Influence of Impact Force, Impact Angle, and Stroke Length in Machine Hammer Peening on the Surface Integrity of the Stainless Steel X3CrNiMo13-4
In: 4th CIRP Conference on Surface Integrity (CSI 2018) / Edited by Fengzou Fang, 166-171, 2018
[DOI: 10.1016/j.procir.2018.05.091]

Mannens, Robby Norbert
Trauth, Daniel
Mattfeld, Patrick-Marcel
Klocke, Fritz

[Journal Article]
IHU-Werkzeugkonzept für einfach wirkende Pressen: Elastomer als ein alternatives Druckmedium für das Umformen von massiven Napfhalbzeugen
In: wt Werkstattstechnik online, 108 (11/12), 802-807, 2018

Voigts, Herman Otto
Hild, Rafael
Trauth, Daniel
Feuerhack, Andreas
Bergs, Thomas

[Journal Article]
Effektive Analyse von Werkzeugmaschinenkalibrierdaten : VoluSoft als Beispiel für die anwenderfreundliche Visualisierung
In: wt Werkstattstechnik online, 108 (11/12), 755-759, 2018

Montavon, Benjamin Leendert Gerard Dominique
Dahlem, Jan Philipp
Schmitt, Robert Heinrich

[Contribution to a book, Contribution to a conference proceedings]
Influence of the Hard Rolling Process and the Cooling Lubricant on the Material Properties and the Flank Load Carrying Capacity of PM Gears
In: Conference Proceedings of the International Gear Conference 2018, Volume I, 27.-29.08.2018, Lyon/ France, 2018

Scholzen, Philipp
Löpenhaus, Christoph
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
A new calibration approach for a grey-box model for thermal error compensation of a C-Axis
In: Conference on Thermal Issues in Machine Tools : Proceedings : CIRP Sponsored Conference Dresden 2018 / Technische Universität Dresden, euspen ; Edited by Prof. Dr.-Ing. Steffen Ihlenfeldt, Prof. Dr.-Ing. Christian Brecher, Prof. Dr.-Ing. Matthias Putz, David Billington, 281-290, 2018

Brecher, Christian
Spierling, Robert
Fey, Marcel

[Contribution to a book, Contribution to a conference proceedings]
Augmented Reality als Fenster ins Internet of Production
In: 19. Leitcongress der Mess- und Automatisierungstechnik : Seamless Convergence of Automation & IT : Automation : Baden-Baden, 03. und 04. Juli 2018 / Herausgeber: VDI Wissensforum GmbH, 800-811, 2018

Schilling, Katrin
Pallasch, Christoph Heinrich
Herfs, Werner

[Journal Article]
A Substructuring Approach For Simulation Of Time Dependent Workpiece Dynamics During Milling
In: MM Science journal, 10 (5), 2625-2632, 2018
[DOI: 10.17973/MMSJ.2018_12_2018105]

Brecher, Christian
Chavan, Prateek Satish
Spierling, Robert
Fey, Marcel

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Validation of the gearbox load calculation of a wind turbine MBS model
In: Journal of physics / Conference Series, 1037, 062025, 2018
[DOI: 10.1088/1742-6596/1037/6/062025]

Matzke, Daniel
Schelenz, Ralf
Reisch, Sebastian
Roscher, Björn
Jacobs, Georg
et al.

[Journal Article]
Reifegradbasierte Auditierung von Weiterbildungsmaßnahmen in Lernfabriken
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 113 (10), 641-646, 2018
[DOI: 10.3139/104.111996]

Metternich, Joachim
Schuh, Günther
Enke, Judith
Molitor, Marco
Kreß, Antonio
et al.

[Journal Article]
BRAGECRIM: Innovationsschub für die Produktionstechnik
In: Tópicos : deutsch-brasilianische Hefte, 57 (2), 18-19, 2018

Freudenberg, Reinhard
Pfeifer, Tilo
Ekanayake, Sarah Indu

[Contribution to a conference proceedings]
Zerspanbedingungen und Toleranzeinfluss bei der Fertigung optimierter Zahnfußgeometrien
In: Seminar "Aktuelle Entwicklungen beim Vorverzahnen" 2018 : 07.-08. November 2018, Aachen, 7-1-7-14, 2018

Ingeli, Jan
Pollaschek, Jonas

[Contribution to a book, Contribution to a conference proceedings]
Potentials of Free Root Fillets in Planetary Gearbox Applications
In: American Gear Manufacturers Association Fall Technical Meeting : 2018 Oak Brook, Illinois, USA, 24 - 26 September 2018, 15-1-15-16, 2018

Pollaschek, Jonas
Brecher, Christian
Löpenhaus, Christoph

[Contribution to a book, Contribution to a conference proceedings]
Einfluss von Planetenträgerabweichungen auf die lokale Lastverteilung in Planetengetrieben
In: SMK 2018, Schweizer Maschinenelemente Kolloquium : 27. und 28. November 2018 : Tagungsband / KISSsoft AG (Hrsg.), 29-43, 2018

Theling, Julian Anselm
Brecher, Christian
Löpenhaus, Christoph

[Contribution to a book, Contribution to a conference proceedings]
Methodology for Determining Agile Product Scopes in Development Projects
In: Managing technological entrepreneurship: the engine for economic growth : PICMET'18 : Portland International Conference on Management of Engineering and Technology / editor: Dundar F. Kocaoglu ; co-editors: Timothy R. Anderson, Dilek Cetindamar Kozanoglu, Kiyoshi Niwa, Harm-Jan Steenhuis, Gary Perman ; organized by: Portland State University, Department of Engineering Technology Management ; sponsored by: IEEE TEMS (Technology and Engineering Management Society), InFocus Corporation, Portland State University Foundation, Search Technology/Vantage Point, 9 Seiten, 2018
[DOI: 10.23919/PICMET.2018.8481926]

Schuh, Günther
Dölle, Christian
Diels, Frederic
Kuhn, Maximilian

[Journal Article]
Vernetzte Bauteilvermessung entlang der digitalen Prozesskette : Für eine schnellere Qualitätsrückmeldung und zur Erhöhung der Transparenz des Fertigungsprozesses
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 113 (12), 799-803, 2018
[DOI: 10.3139/104.112027]

Brecher, Christian
Wiesch, Marian
Epple, Alexander

[Book, Dissertation / PhD Thesis]
Fertigung basaltfaserverstärkter Bauteile auf Basis duroplastischer Matrixsysteme mit aktivierbarer Adhäsion, VIII, 145 Seiten : Illustrationen, Diagramme, 2018

Werner, Daniel

[Contribution to a conference proceedings]
Tribologie selbstschmierender PVD-Schichten für die trockene Kaltmassivumformung
In: [59. Tribologie-Fachtagung, GfT 2018, Göttingen, Germany : Zerspanungs- & Umformtechnik], 2018

Bobzin, Kirsten
Brögelmann, Tobias
Kruppe, Nathan Christopher
Hoffmann, Dennis Christopher
Klocke, Fritz
et al.

[Journal Article]
Underlying Mechanisms for Developing Process Signatures in Manufacturing
In: Nanomanufacturing and Metrology, 1 (4), 193-208, 2018
[DOI: 10.1007/s41871-018-0021-z]

Brinksmeier, E.
Reese, Stefanie
Klink, Andreas
Langenhorst, L.
Lübben, T.
et al.

[Journal Article]
Numerical Prediction of the Microstructure and Stress Evolution During Surface Grinding of AISI 52100 (DIN 100Cr6)
In: Integrating materials and manufacturing innovation, 7 (4), 202-213, 2018
[DOI: 10.1007/s40192-018-0122-y]

Rajaei, Ali
Hallstedt, Bengt
Broeckmann, Christoph
Barth, Sebastian
Trauth, Daniel
et al.

[Journal Article]
Task-specific uncertainty estimation for medical CT measurements
In: Journal of sensors and sensor systems : JSSS, 7 (2), 627-635, 2018
[DOI: 10.5194/jsss-7-627-2018]

Bredemann, Judith
Schmitt, Robert Heinrich

[Journal Article]
Erkenntnisse umsetzen : Strategieentwicklung und -umsetzung im Werkzeugbau : Teil 3: Conduct
In: Form + Werkzeug, 26 (5), 48-49, 2018

Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
de Lange, Johan
Boshof, Julian

[Book, Proceedings]
7th Workshop Machine Hammer Peening : November 12-13, 2018
In: 7th Workshop Machine Hammer Peening Aachen 2018-11-12 - 2018-11-13, XI, 118 Seiten : Illustrationen, Diagramme, 2018

Trauth, Daniel
Mannens, Robby Norbert

[Contribution to a conference proceedings, Journal Article]
Scenario-based Manufacturing Data Analytics with the Example of Order Tracing through BLE-Beacons
In: Procedia manufacturing, 2018, 243-249, 2018
[DOI: 10.1016/j.promfg.2018.06.032]

Groggert, Sebastian
Elser, Hannes
Ngo, Quoc Hao
Schmitt, Robert Heinrich

[Journal Article]
Metamodellbasierte Technologieplanung : Generierung prozessübergreifender Metamodelle zur ganzheitlichen Optimierung von Prozessfolgen
In: wt Werkstattstechnik online, 108 (11/12), 829-833, 2018

Bergs, Thomas
Beckers, Alexander
Rey, Jan
Trauth, Daniel

[Journal Article]
Zukunftsfähigkeit wird messbar : Wie fit ist ihr Unternehmen für die industrielle Transformation?
In: Qualität und Zuverlässigkeit : QZ, 63 (12), 42-45, 2018

Adam, Tobias
Heine, Ina
Schmitt, Robert Heinrich

[Contribution to a book, Contribution to a conference proceedings]
Methodology for Business Model Related Product Design
In: Managing technological entrepreneurship: the engine for economic growth : PICMET'18 : Portland International Conference on Management of Engineering and Technology / editor: Dundar F. Kocaoglu ; co-editors: Timothy R. Anderson, Dilek Cetindamar Kozanoglu, Kiyoshi Niwa, Harm-Jan Steenhuis, Gary Perman ; organized by: Portland State University, Department of Engineering & Technology Management ; sponsored by: IEEE TEMS (Technology and Engineering Management Society), InFocus Corporation, Portland State University Foundation, Search Technology/Vantage Point, 1-8, 2018

Schuh, Günther
Dölle, Christian
Ebi, Manuel

[Contribution to a book, Contribution to a conference proceedings]
Big Data Magic : Revolutioniert maschinelles Lernen die Zerspanung?
In: 7. Aachener High-Performance-Cutting (HPC) Konferenz : 23.-24. Oktober 2018 / Thomas Bergs, Fritz Klocke, Benjamin Döbbeler (Hrsg.), 217-232, 2018

Schwenzer, Max

[Journal Article]
On the future of ramp-up management
In: CIRP journal of manufacturing science and technology : CIRP-JMST, 11 (23), 217-225, 2018
[DOI: 10.1016/j.cirpj.2018.03.001]

Schmitt, Robert Heinrich
Heine, Ina
Jiang, Ruth
Giedziella, Felix Thomas
Basse, Felix
et al.

[Journal Article]
Editorial: Special Issue on Ramp-up Management
In: CIRP journal of manufacturing science and technology : CIRP-JMST, 23, 145-145, 2018
[DOI: 10.1016/j.cirpj.2018.11.004]

Schmitt, Robert Heinrich
Heine, Ina

[Book]
Grundlagenseminar Zahnrad- und Getriebetechnik, II, 328 Seiten, 2018

Bergs, Thomas
Brecher, Christian
Löpenhaus, Christoph

[Book, Proceedings]
Proceedings of the 14th INSECT 2018 : International Symposium on Electrochemical Machining Technology 2018 : Aachen, November 27-28,2018
In: 14th International Symposium on ElectroChemical Machining Technology Aachen 2018-11-27 - 2018-11-28, 219 Seiten : Illustrationen, 2018

Bergs, Thomas
Herrig, Tim
Harst, Simon Christoph
Klink, Andreas

[Book, Dissertation / PhD Thesis]
Einflussfaktoren der Leistungsfähigkeit von Produktionsstandorten in globalen Produktionsnetzwerken, XXV, 232 Seiten : Illustrationen, Diagramme, 2018

Rittstieg, Margarete Maria

[Book]
Industrie 4.0: Implement it! : Ein Leitfaden zur erfolgreichen Implementierung von Industrie 4.0-Lösungen, 2018

Schuh, Günther
Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
de Lange, Johan
Stracke, Felix Konstantin
et al.

[Book]
Erfolgreich Lieferanten Managen : im Werkzeugbau, 29 Seiten, 2018

Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
de Lange, Johan
Schultes, Thilo Konrad
Busch, Max

[Contribution to a book, Contribution to a conference proceedings]
Methodology for the derivation of a digital shadow for engineering management
In: 2018 IEEE Technology and Engineering Management Conference (TEMSCON) : 28 June-1 July 2018 / IEEE, TEMSCON 2018, IEEE TEMS, 1-6, 2018
[DOI: 10.1109/TEMSCON.2018.8488412]

Schuh, Günther
Dölle, Christian
Tönnes, Carl Christian

[Journal Article]
Volltreffer beim Kundennutzen : Wie nützlich sind individuelle Kundenprodukte für das eigene Portfolio?
In: Industrie-Anzeiger, 140 (29), 24-25, 2018

Schuh, Günther
Dölle, Christian
Ays, Johanna

[Journal Article]
Zwischen Industrie 4.0 und Marktintelligenz : Compare, Compile, Conduct - strategische Weiterentwicklung im Werkzeugbau
In: Kunststoffe , 107 (10), 40-45, 2018

Boos, Wolfgang
Kelzenberg, Christoph Maximilian Bernd
Wiese, Jan-Hendrik
Helbig, Jens

[Journal Article]
In drei Schritten zur Musterfabrik : Dateninfrastruktur pragmatisch aufbauen
In: Industrie-Anzeiger, 140 (30), 26-27, 2018

Schuh, Günther
Prote, Jan-Philipp
Gützlaff, Andreas
Ays, Julian Leander

[Contribution to a book, Contribution to a conference proceedings]
Virtual Tempering of Large Workpieces in Geometric Inspection: Model-Based In-Process Determination of Thermoelastic Deviations
In: Koordinatenmesstechnik 2018 - Technologien und Anwendungen, Tagungsband der DIN Tagung am 14./15. November 2018, Braunschweig, 133-142, 2018

Schmitt, Robert Heinrich
Ohlenforst, M.

[Book, Proceedings]
7. Aachener High-Performance-Cutting (HPC) Konferenz : 23.-24. Oktober 2018
In: 7. Aachener High-Performance-Cutting (HPC) Konferenz Aachen 2018-10-23 - 2018-10-24, VII, 329 Seiten : Illustrationen, 2018

Bergs, Thomas
Klocke, Fritz
Döbbeler, Benjamin

[Contribution to a book]
Präzise Fertigung von Grossbauteilen
In: Jahresmagazin Mess- und Sensortechnik. - 2016/2017, 48-51, 2018

Ohlenforst, Marcus
Wennemer, Matthias
Behrens, Jan
Peterek, Martin

[Journal Article]
Datenbasierte Geschäftsmodelle für den Werkzeugbau
In: Digital manufacturing, 11 (5), 18-19, 2018

Schuh, Günther
Kelzenberg, Christoph Maximilian Bernd
de Lange, Johan

[Journal Article]
Determination of the optimal imaging parameters in industrial computed tomography for dimensional measurements on monomaterial workpieces
In: Measurement science and technology, 29 (11), article 115009, 2018
[DOI: 10.1088/1361-6501/aae4d6]

Buratti, Andrea
Grozmani, Natalia
Voigtmann, Christoph Michael
Sartori, Luca
Schmitt, Robert Heinrich

[Contribution to a conference proceedings]
Versteckte Oberflächenkennwerte: Rauheit im Zahnfuß
In: Aktuelle Entwicklung beim Vorverzahnen : Seminar 7-8. Nov 2018, Aachen, 10-1-10-20, 2018

Kühn, Felix
Löpenhaus, Christoph
Bergs, Thomas

[Journal Article]
Influence of Different Manufacturing Processes on Properties of Surface-Densified PM Gears
In: Gear technology, 35 (7), 66-77, 2018

Frech, Tim
Scholzen, Philipp
Löpenhaus, Christoph
Klocke, Fritz

[Contribution to a book, Contribution to a conference proceedings]
Damage Evolution in Nakajima Tests of DP800 Dual Phase Steel
In: International Deep Drawing Research Group 37th Annual Conference : 3-7 June 2018, University of Waterloo, Waterloo, Ontario, Canada / editors: Professor Michael Worswick (University of Waterloo), Professor Cliff Butcher (University of Waterloo), Professor Alexander Bardelcik (University of Guelph), 1-6, 2018
[DOI: 10.1088/1757-899X/418/1/012048]

Bergs, Thomas
Nick, Matthias
Trauth, Daniel
Klocke, Fritz

[Contribution to a book, Contribution to a conference proceedings]
FEM-Simulation der Wärmebehandlung von PM-Bauteilen am Beispiel des Einsatzhärtens randschichtverdichteter PM-Zahnräder
In: Pulvermetallurgie - neue Herausforderungen und neue Wege : Vorträge und Ausstellerbeiträge des Hagener Symposiums am 29. und 30. November 2018 in Hagen / veranstaltet vom Ausschuss für Pulvermetallurgie, Deutsche Gesellschaft für Materialkunde (DGM), Deutsche Keramische Gesellschaft (DKG), Fachverband Pulvermetallurgie (FPM), Verein Deutscher Ingenieure - Gesellschaft Materials Engineering (VDI-GME), Stahlinstitut VDEh; Fachverband Pulvermetallurgie ; Herausgeber: Herbert Danninger, Lorenz Sigl, Christoph Broeckmann, 69-80, 2018

Rajaei, Ali
Frech, Tim
Scholzen, Philipp
Hallstedt, Bengt
Löpenhaus, Christoph
et al.

[Contribution to a book, Contribution to a conference proceedings]
Multi-Level Modeling Framework for Machine as a Service Applications Based on Product Process Resource Models
In: IARCE 2018 - 2018 2nd International Conference on Industrial Automation, Robotics and Control Engineering(IARCE 2018), Proccedings, 2018-09-21 - 2018-09-23, Stockholm, Sweden, Article No. 4, 2018
[DOI: 10.1145/3284557.3284714]

Brecher, Christian
Kusmenko, Evgeny
Lindt, Achim
Rumpe, Bernhard
Storms, Simon
et al.

[Contribution to a conference proceedings]
Ran an das Werkstück: Analyse des Anschnitts beim Wälzfräsen
In: Aktuelle Entwicklung beim Vorverzahnen : Seminar 7-8. Nov 2018, Aachen, 7/1-7/9, 2018

Troß, Nico
Löpenhaus, Christoph
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
ProducTron: Towards Flexible Distributed and Networked Production
In: INES 2018 : IEEE 22nd International Conference on Intelligent Engineering Systems : proceedings : June 21-23, 2018, Las Palmas de Gran Canaria, Spain / proceedings editor: Anikó Szakál, Óbuda University, Budapest, Hungary, 287-292, 2018
[DOI: 10.1109/INES.2018.8523995]

Pallasch, Christoph Heinrich
Hoffmann, Nicolai
Storms, Simon
Herfs, Werner

[Contribution to a book, Contribution to a conference proceedings]
Data-Consistent Toolchain for a Requirements-Based Specification with the Interdisciplinary Modeling Language (IML)
In: INES 2018 : IEEE 22nd International Conference on Intelligent Engineering Systems : proceedings : June 21-23, 2018, Las Palmas de Gran Canaria, Spain / proceedings editor: Anikó Szakál, Óbuda University, Budapest, Hungary, 219-224, 2018
[DOI: 10.1109/INES.2018.8523930]

Herfs, Werner
Flender, Jerome
Storms, Simon
Witte, Martin

[Contribution to a conference proceedings]
Influence of Grinding Oil Composition on the Gear Grinding Process and Component Behavior
In: GETLUB 5th International Conference on Gear and Drivetrain Lubrication, November 6 -7, 2018, Hamburg, Germany, 5-10, 2018

Greschert, René
Brecher, Christian
Löpenhaus, Christoph

[Journal Article]
pti jetzt im Maschineneinsatz
In: NC-Fertigung, 39 (9), 232-233, 2018

Brecher, Christian
Bergs, Christian Siegfried
Fey, Marcel

[Contribution to a book, Contribution to a conference proceedings]
Model-based data analytics - Process-parallel quality assessment
In: 7. Aachener High-Performance-Cutting (HPC) Konferenz : 23.-24. Oktober 2018 / Thomas Bergs, Fritz Klocke, Benjamin Döbbeler (Hrsg.), 279-295, 2018

Epple, Alexander
Fey, Marcel

[Contribution to a book, Contribution to a conference proceedings]
Analysis of the Damping Potential of Powder Metallurgical Manufactured Gear Bodies
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 2018

Brecher, Christian
Löpenhaus, Christoph
Scholzen, Philipp

[Book, Dissertation / PhD Thesis]
Pragmatic process chain evaluation for automative lightweight applications, xiii, 163 Seiten : Illustrationen, Diagramme, 2018

Lindner, Florian

[Book, Dissertation / PhD Thesis]
Gestaltung agiler Entwicklungsprozesse technischer Produkte, XX, 285 Seiten : Illustrationen, Diagramme, 2018

Kantelberg, Jan Erik

[Contribution to a book, Contribution to a conference proceedings]
Studying Technologies of Industry 4.0 with Influence on Product Development using Factor Analysis
In: DS 91: Proceedings of 13th biennial Norddesign Conference Design 2018, Linköping, Sweden, 14th- 17th August 2018, 2018

Schuh, Günther
Dölle, Christian
Mattern, Christian Alexander
Modler, Marie-Christine
Schloesser, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Fe simulation of case hardening surface densified PM gear wheels
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 2018

Rajaei, Ali
Frech, Tim
Scholzen, Philipp
Hallstedt, Bengt
Löpenhaus, Christoph
et al.

[Contribution to a book, Contribution to a conference proceedings]
Agile Prototyping for technical systems : towards an adaption ot the Minimum Viable Product principle
In: DS 91 Proceedings of 13th biennial Norddesign Conference Design 2018, Linköping, Sweden, 14th- 17th August 2018, 2018

Schuh, Günther
Dölle, Christian
Schlößer, Elmar Sebastian

[Journal Article]
Mobile Roboter zur freien Verkettung von Montagestationen : Wie lassen sich moblile Roboter entwickeln und einsetzen, um ein flexibles Transportsystem zu realisieren?
In: wt Werkstattstechnik online, 108 (9), 580-585, 2018

Göppert, Mirko Robin Amon
Grunert, Dennis
Pöhler, Stephan
Hüttemann, Guido
Schmitt, Robert Heinrich

[Contribution to a book, Contribution to a conference proceedings]
Data Model-based Improvement of Transparency and Controllability of Product Complexity
In: 2018 IEEE Technology and Engineering Management Conference (TEMSCON) : 28 June-1 July 2018 / IEEE, TEMSCON 2018, IEEE TEMS, 8488389, 2018
[DOI: 10.1109/TEMSCON.2018.8488389]

Schuh, Günther
Dölle, Christian
Koch, Jan Felix

[Contribution to a book, Contribution to a conference proceedings]
Experimental analysis of the heat flux into the grinding tool in creep feed grinding with CBN abrasives
In: Conference on Thermal Issues in Machine Tools : proceedings : CIRP sponsored conference, Dresden, 2018 / Technische Universität Dresden, Euspen ; edited by: Prof. Dr.-Ing. Steffen Ihlenfeldt, Prof. Dr.-Ing Christian Brecher, Prof. Dr.-Ing. Matthias Putz, David Billington ; TU Dresden, Institut für Werkzeugmachinen und Steuerungstechnik, Chair of Machine Tools Development and Adaptive Controls; Collaborative Research Centre CRC/TR 96, 225-234, 2018

Wrobel, Christian
Trauth, Daniel
Mattfeld, Patrick-Marcel
Klocke, Fritz

[Contribution to a book, Contribution to a conference proceedings]
Modeling of the temperature field in the workpiece external zone as a function of the grinding wheel topography
In: 8th CIRP Conference on High Performance Cutting (HPC 2018) / Edited by László Monostori, Gabor Stepan, Dániel Bachrathy, 291294, 2018
[DOI: 10.1016/j.procir.2018.09.018]

Wrobel, Christian
Mattfeld, Patrick-Marcel
Trauth, Daniel
Klocke, Fritz

[Journal Article]
Datenbedarfe für eine energie-flexible Produktionsplanung und -steuerung
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 113 (9), 550-553, 2018
[DOI: 10.3139/104.111966]

Schuh, Günther
Schmitt, Robert Heinrich
Prote, Jan-Philipp
Ellerich, Max
Thomas, Katharina
et al.

[Contribution to a book, Contribution to a conference proceedings]
Reduction of Decision Complexity as an Enabler for Continuous Production Network Design
In: Advances in Production Management Systems. Production Management for Data-Driven, Intelligent, Collaborative, and Sustainable Manufacturing : IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018, Proceedings, Part I / edited by Ilkyeong Moon, Gyu M. Lee, Jinwoo Park, Dimitris Kiritsis, Gregor von Cieminski, 246-253, 2018
[DOI: 10.1007/978-3-319-99704-9_30]

Schuh, Günther
Prote, Jan-Philipp
Fränken, Bastian
Dany, Stefan
Gützlaff, Andreas

[Journal Article]
Untersuchung des Einsatzes von Zementbeton für Strukturbauteile in Werkzeugmaschinen
In: Werkstoffe in der Fertigung, 55 (4), 27-29, 2018

Brecher, Christian
Kiesewetter-Marko, Caroline
Schmidt, Simo Aleksis
Kalthoff, Matthias
Fey, Marcel

[Contribution to a book, Contribution to a conference proceedings]
Influence of different input parameters on the contact conditions determing the surface integrity of workpieces in an unguided vibratory finishing process
In: 4th CIRP Conference on Surface Integrity (CSI 2018) / edited by Fengzou Fang, 53-58, 2018
[DOI: 10.1016/j.procir.2018.05.022]

Lachenmaier, Maximilian
Dehmer, Alexander
Trauth, Daniel
Mattfeld, Patrick-Marcel
Klocke, Fritz

[Contribution to a conference proceedings]
Experimental Investigation of CFRP Trimming by Means of Shearing
In: [21st International Conference on Composite Materials, ICCM-21, 2018-08-20 - 2018-08-25, Xian, Peoples R China], 2018

Klocke, Fritz
Shirobokov, Anton
Stanke, Joachim Patrick Thomas
Feuerhack, Andreas
Trauth, Daniel
et al.

[Contribution to a book, Contribution to a conference proceedings]
Integration of Tool Making into Agile Product Development using Industry 4.0 Technologies and Additive Manufacturing Technologies
In: Managing technological entrepreneurship: the engine for economic growth : PICMET'18 : Portland International Conference on Management of Engineering and Technology / editor: Dundar F. Kocaoglu ; co-editors: Timothy R. Anderson, Dilek Cetindamar Kozanoglu, Kiyoshi Niwa, Harm-Jan Steenhuis, Gary Perman ; organized by: Portland State University, Department of Engineering & Technology Management ; sponsored by: IEEE TEMS (Technology and Engineering Management Society), InFocus Corporation, Portland State University Foundation, Search Technology/Vantage Point, 18149976, 2018
[DOI: 10.23919/PICMET.2018.8481931]

Schuh, Günther
Salmen, Michael
Kelzenberg, Christoph Maximilian Bernd
de Lange, Johan

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Process-parallel virtual quality evaluation for metal cutting in series production
In: Procedia manufacturing, 2018, 1087-1093, 2018
[DOI: 10.1016/j.promfg.2018.07.145]

Königs, Michael
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Optical Coherence Tomography - Towards New Medical Applications
In: CURAC 2018 - Tagungsband : 17. Jahrestagung der Deutschen Gesellschaft für Computer- und Roboterassistierte Chirurgie e.V. : 13.-15. September 2018, Leipzig / Herausgeber: Thomas Neumuth, Andreas Melzer, Claire Chalopin ; Redaktion: Kathrin Scholz, 183-188, 2018

König, Niels
Riediger, Max
Wilhelm, Dirk
Witte, Michael
Masamune, Ken
et al.

[Abstract, Contribution to a conference proceedings, Journal Article]
Optische Kohärenz Tomografie (OCT) zur intraoperativen Untersuchung von Gewebeproben
In: Laryngo-Rhino-Otologie, 97 (S 02), S27-S28, 2018
[DOI: 10.1055/s-0038-1639811]

Beck, Rafael
Riediger, M.
Dietz, A.
Pallasch, David
König, Niels
et al.

[Book, Dissertation / PhD Thesis]
Informationssystem-Architekturen produzierender Unternehmen bei software-definierten Plattformen, 1 Online-Ressource (XVIII, 315 Seiten) : Illustrationen, 2018

Hoffmann, Jörg

[Contribution to a conference proceedings, Journal Article]
Einfluss einer gezielt aufgeprägten Mikrogeometriestreuung auf das Anregungsverhalten von Kegelradverzahnungen
In: Forschung im Ingenieurwesen = Engineering research, 82 (4), 379-393, 2018
[DOI: 10.1007/s10010-018-0286-9]

Kasten, Marcel-Michél
Brecher, Christian
Löpenhaus, Christoph

[Contribution to a conference proceedings, Journal Article]
A characterization of quality of sheared edge in fine blanking using edge-computing approach
In: Procedia manufacturing, 2018, 578-583, 2018
[DOI: 10.1016/j.promfg.2018.07.280]

Trauth, Daniel
Stanke, Joachim Patrick Thomas
Feuerhack, Andreas
Bergs, Thomas
Mattfeld, Patrick-Marcel
et al.

[Journal Article]
Schleifscheibenverschleiß bei der PKD-Bearbeitung : Schleifscheibenverschleißmechanismen beim Schleifen von polykristallinem Diamant
In: wt Werkstattstechnik online, 108 (6), 448-453, 2018

Vits, Frederik Jan
Trauth, Daniel
Mattfeld, Patrick-Marcel
Klocke, Fritz

[Journal Article]
Kostenoptimierte Herstellung sicherheitskritischer Bauteile: Integrative Gestaltung von Fertigungs- und Prüfplanung
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 113 (7/8), 2-6, 2018
[DOI: 10.3139/104.111952]

Hermann, Lennard
Schlegel, Peter
Müller, Johannes
Rey, Jan
Bergs, Thomas
et al.

[Contribution to a book, Contribution to a conference proceedings]
Penetration calculation based modelling of the process forces in cold rolling of powder metal gears
In: International Gear Conference 2018 : 27-29 August 2018 Lyon Villeurbanne, France : 27.-29.08.2018, Lyon/ France. - Volume 1, 363-373, 2018

Frech, Tim
Löpenhaus, Christoph
Bergs, Thomas
Klocke, Fritz

[Contribution to a book, Contribution to a conference proceedings]
Optimizing the operational behavior of bevel gears using a tolerance field-based approach
In: International Gear Conference 2018 : 27-29 August 2018 Lyon Villeurbanne, France : 27.-29.08.2018, Lyon/ France. - Volume 1, 191-200, 2018

Trippe, Moritz Johannes
Lemmer, A.
Löpenhaus, Christoph
Brecher, Christian

[Journal Article]
Zerspankraftmodell für den Wälzfräsprozess
In: Die Antriebstechnik, 57 (8), 46-50, 2018

Kühn, Felix
Löpenhaus, Christoph
Bergs, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Prediction of process forces in gear honing
In: Conference Proceedings of the International Gear Conference 2018 : 27th - 29th August 2018, Lyon Villeurbanne France. - , Volume I, 374-383, 2018

Schrank, Maximilian Günter
Kampka, Marco
Kiesewetter-Marko, Caroline
Löpenhaus, Christoph
Epple, Alexander
et al.

[Contribution to a book, Contribution to a conference proceedings]
Influence of the machining strategy on the resulting properties of 5-axis hard milled bevel gears
In: Conference Proceedings of the International Gear Conference 2018 : 27th - 29th August 2018, Lyon Villeurbanne France. - Volume I, 307-315, 2018

Solf, Mareike
Bieker, Rafael
Löpenhaus, Christoph
Klocke, Fritz
Bergs, Thomas

[Contribution to a conference proceedings, Journal Article]
A predictive model for die roll height in fine blanking using machine learning methods
In: Procedia manufacturing, 3, 570-577, 2018
[DOI: 10.1016/j.promfg.2018.07.279]

Stanke, Joachim Patrick Thomas
Feuerhack, Andreas
Trauth, Daniel
Mattfeld, Patrick-Marcel
Klocke, Fritz

[Journal Article]
Bewertung der Lärmemissionen von Werkzeugmaschinen unter Prozesslast
In: VDI-Z integrierte Produktion, 160 (7/8), 36-38, 2018

Brecher, Christian
Fey, Marcel
Motschke, Tobias

[Contribution to a book, Contribution to a conference proceedings]
Determination of order specific transition times for improving the adherence to delivery dates by using data mining algorithms
In: 51st CIRP Conference on Manufacturing Systems / Edited by Lihui Wang, 169-173, 2018
[DOI: 10.1016/j.procir.2018.03.236]

Schuh, Günther
Prote, Jan-Philipp
Luckert, Melanie
Sauermann, Frederick Christian

[Contribution to a book, Contribution to a conference proceedings]
Dienstbasierte Planung kollaborativer Montageprozesse
In: Industrie 4.0 - Wertschöpfungspotenziale in der dienstebasierten Produktion : Berichte zum aktuellen Stand der Forschung aus dem WZL (RWTH Aachen), dem PTZ (Produktionstechnisches Zentrum Berlin) und dem ISW (Universität Stuttgart) : ABS-Treffen 2017 Universität Stuttgart / Prof. Dr.-Ing. Christian Brecher, Prof. Dr.-Ing. Jörg Krüger, Prof. Dr.-Ing. Eckart Uhlmann, Prof. Dr.-Ing. Alexander Verl (Hrsg.), Prof. Dr.-Ing. Oliver Riedel (Hrsg.), Dr.-Ing. Armin Lechler (Hrsg., 75-86, 2018

Storms, Simon
Herfs, Werner

[Journal Article]
Quantitative Beschreibung der Schleifscheibentopographie: Anwendungsorientierte Charakterisierung der Schleifscheibentopographie anhand quantitativer Kenngrößen
In: wt Werkstattstechnik online, 108 (6), 441-447, 2018

Barth, Sebastian
Röttger, Jannik
Trauth, Daniel
Mattfeld, Patrick-Marcel
Bergs, Thomas
et al.

[Contribution to a book, Contribution to a conference proceedings]
A 5G Architecture for The Factory of the Future
In: Proceedings 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA) : Politecnico di Torino, Torino, Italy, 04-07 September 2018 / organized by: IEEE Industrial Electronics Society (IES); Institute of Electronics, Computer and Telecommunication Engineering, the National Research Council of Italy (CNR-IEIIT) ; sponsored by: the Institute of Electrical and Electronics Engineers (IEEE), IEEE Industrial Electronics Society (IES), 1409-1416, 2018
[DOI: 10.1109/ETFA.2018.8502642]

Ludwig, Stephan
Karrenbauer, Michael
Fellan, Amina
Schotten, Hans Dieter
Buhr, Henning
et al.

[Contribution to a book, Contribution to a conference proceedings]
"Energy-as-a-Service" : dienstbasiertes, modulares Leitsystem zur energieflexiblen Fertigung
In: Industrie 4.0 - Wertschöpfungspotenziale in der dienstebasierten Produktion : Berichte zum aktuellen Stand der Forschung aus dem WZL (RWTH Aachen), dem PTZ (Produktionstechnisches Zentrum Berlin) und dem ISW (Universität Stuttgart) : ABS-Treffen 2017 Universität Stuttgart / Prof. Dr.-Ing. Christian Brecher, Prof. Dr.-Ing. Jörg Krüger, Prof. Dr.-Ing. Eckart Uhlmann, Prof. Dr.-Ing. Alexander Verl (Hrsg.), Prof. Dr.-Ing. Oliver Riedel (Hrsg.), Dr.-Ing. Armin Lechler (Hrsg., 45-56, 2018

Fimmers, Christian
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Assessment of Different Technology Chains for Fir Tree Manufacturing : A Case Study
In: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition - 2018 : presented at the ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, June 11-15, 2018, Oslo, Norway / sponsored by the International Gas Turbine Institute. - Volume 6: Ceramics; controls, diagnostics and instrumentation; education; manufacturing materials and metallurgy, GT2018-75190, 5 Seiten, 2018
[DOI: 10.1115/GT2018-75190]

Klocke, Fritz
Seimann, Martin Albert
Binder, Hanns Marvin
Döbbeler, Benjamin

[Contribution to a book, Contribution to a conference proceedings]
Temporal and Flexible Automation of Machine Tools
In: INES 2018 - Conference Proceeding : 22nd IEEE International Conference on Intelligent Engineering Systems 2018, 21.- 23.06. 2018 ; Las Palmas de Gran Canaria/Spain, 335-340, 2018
[DOI: 10.1109/INES.2018.8523978]

Lienenlüke, Lars
Gründel, Lukas
Storms, Simon
Herfs, Werner
Königs, Michael
et al.

[Journal Article]
Wettbewerb "Excellence in Production" zum "Werkzeugbau des Jahres" 2018
In: KC - Kunststoff-Cluster, 2018 (1), 6-7, 2018

Boos, Wolfgang
Salmen, Michael
Kelzenberg, Christoph Maximilian Bernd
Helbig, Jens
Prümmer, Marcel
et al.

[Contribution to a book, Contribution to a conference proceedings]
Novel approach for wireless commissioning and assisted process development based on Bluetooth Low Energy
In: Proceedings 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA) : Politecnico di Torino, Torino, Italy, 04-07 September 2018 / organized by: IEEE Industrial Electronics Society (IES); Institute of Electronics, Computer and Telecommunication Engineering, the National Research Council of Italy (CNR-IEIIT) ; sponsored by: the Institute of Electrical and Electronics Engineers (IEEE), IEEE Industrial Electronics Society (IES), 235-242, 2018
[DOI: 10.1109/ETFA.2018.8502455]

Pallasch, Christoph Heinrich
Peitz, Alexander
Herfs, Werner
Schmeink, Anke
Dartmann, Guido

[Book, Dissertation / PhD Thesis]
Experimental and numerical investigations of separation mechanisms when shearing cured carbon fiber reinforced plastics with thermoset matrices, XI, 193 Seiten : Illustrationen, Diagramme, 2018

Shirobokov, Anton

[Contribution to a book, Contribution to a conference proceedings]
Influence of surface integrity on the plastic flow in analogous testing of 42CrMo4
In: 5th International Conference on New Forming Technology (ICNFT 2018), 14009, 6 Seiten, 2018
[DOI: 10.1051/matecconf/201819014009]

Hild, Rafael
Feuerhack, Andreas
Trauth, Daniel
Hoffmann, Dennis Christopher
Kruppe, Nathan Christopher
et al.

[Journal Article]
Entwicklung von HPPMS‐Al2O3‐Beschichtungen für die Zerspanung von schwer zerspanbaren Werkstoffen
In: Materials science and engineering technology = Materialwissenschaft und Werkstofftechnik, 49 (11), 1287-1300, 2018
[DOI: 10.1002/mawe.201800008]

Bobzin, Kirsten
Brögelmann, Tobias
Kruppe, Nathan Christopher
Bastürk, Serhan
Klocke, Fritz
et al.

[Book, Dissertation / PhD Thesis]
Automated zonal finishing process design, modeling and optimization, XII, 184 Seiten : Illustrationen, 2018

Driemeyer Wilbert, André

[Contribution to a book, Contribution to a conference proceedings]
Einfluss der Prüfkörpergeometrie auf das Zugtragverhalten von zementgebundenen Betonen
In: Tagungsbericht / Ibausil, 20. Internationale Baustofftagung, 12. - 14. September 2018, Weimar, Bundesrepublik Deutschland / F.A. Finger-Institut für Baustoffkunde, Bauhaus-Universität Weimar ; Herausgeber Prof. Dr.-Ing. H.-M. Ludwig ; Redaktion Dr.Ing. H.-B. Fischer. - Tagungsband 1, 1-1115-1-1122, 2018

Kalthoff, Matthias
Gilleßen, Felix
Raupach, Michael
Schmidt, Simo Aleksis
Kiesewetter-Marko, Caroline
et al.

[Contribution to a book, Journal Article]
Digital Shadows in the Internet of Production
In: ERCIM news, 115, 26-28, 2018

Jarke, Matthias
Schuh, Günther
Brecher, Christian
Brockmann, Matthias
Prote, Jan-Philipp

[Book, Dissertation / PhD Thesis]
Model-based optimization of setup parameters for dimensionel measurements on monomaterial and multimaterial workpieces in industrial computed tomography, IX, 146 Seiten, 7 ungezählte Seiten : Illustrationen, 2018

Buratti, Andrea

[Journal Article]
Resource efficiency in the German copper cycle : Analysis of stock and flow dynamics resulting from different efficiency measures
In: Resources, conservation and recycling, 139, 205-218, 2018
[DOI: 10.1016/j.resconrec.2018.08.017]

Pfaff, Matthias
Glöser-Chahoud, Simon
Chrubasik, Lothar
Walz, Rainer

[Book, Dissertation / PhD Thesis]
Implementation and optimization of CAM strategies for machining of blisks, XI, 169 Seiten : Illustrationen, 2018

Ur-Rehman, Riaz

[Contribution to a book, Contribution to a conference proceedings]
Edge Powered Industrial Control: Concept for Combining Cloud and Automation Technologies
In: 2018 IEEE International Conference on Edge Computing : IEEE EDGE 2018 : part of the 2018 IEEE World Congress on Services : 2-7 July 2018, San Francsico, California, USA : proceedings / sponsored by: IEEE, IEEE Computer Society, 130-134, 2018
[DOI: 10.1109/EDGE.2018.00026]

Pallasch, Christoph Heinrich
Wein, Stephan
Hoffmann, Nicolai
Obdenbusch, Markus
Buchner, Tilman
et al.

[Book, Dissertation / PhD Thesis]
Analyse der Einflüsse auf die Gestaltabweichung gepresster Glasoptiken beim nicht-isothermen Blankpressen, XIII, 143, A-S Seiten : Illustrationen, 2018

Kreilkamp, Holger

[Contribution to a conference proceedings, Journal Article]
Analysis of the grinding wheel wear in dependency of the cemented carbide specification
In: The international journal of advanced manufacturing technology, 99 (1/4), 747-754, 2018
[DOI: 10.1007/s00170-018-2362-6]

Wirtz, Christian
Dehmer, Alexander
Trauth, Daniel
Mattfeld, Patrick-Marcel
Klocke, Fritz

[Report]
Schlussbericht zu IGF-Vorhaben Nr. 18401 N : Thema: Steigerung der Produktivität beim Fräsen durch die zielgerichtete Zufuhr des Kühlschmierstoffs mit Hochdruck - ProMill : Berichtszeitram: 01.05.2015 - 31.01.2018, 119 Seiten : Illustrationen, Diagramme, 2018

Lakner, Thomas
Peng, Bingxiao
Klocke, Fritz

[Journal Article]
Wie wir in Zukunft lernen : Immersion: Lernen im Werkzeugbau der Zukunft
In: Form + Werkzeug, 27 (2), 36-37, 2018

Boos, Wolfgang
Salmen, Michael
Stark, Peter Maximilian
Schultes, Thilo Konrad
Schmidhuber, Matthias

[Book, Dissertation / PhD Thesis]
Langfristige Nutzung produktorientierter Beschwerdeinformationen, VIII, 165 Seiten : Diagramme, 2018

Linder, Alexander

[Journal Article]
Potenzial von Echtzeitdaten für die Produktion: Ergebnisse einer Studie des Werkzeugmaschinenlabors WZL der RWTH Aachen
In: wt Werkstattstechnik online, 108 (4), 198-203, 2018

Schuh, Günther
Prote, Jan-Philipp
Luckert, Melanie
Schmidhuber, Matthias

[Contribution to a book, Contribution to a conference proceedings]
Bedarfsgerecht auslegen? Aber wie?
In: Innovationen rund ums Kegelrad : 14.-15. März 2018 / Christian Brecher, Fritz Klocke, Christoph Löpenhaus (Hrsg.), 59-66, 2018

Lemmer, A.
Trippe, Moritz Johannes

[Journal Article]
Wettbewerbsvergleich: Strategieentwicklung und -umsetzung im Werkzeugbau - Teil 1 Compare
In: Form + Werkzeug, 26 (3), 60-61, 2018

Boos, Wolfgang
Salmen, Michael
Kelzenberg, Christoph Maximilian Bernd
de Lange, Johan

[Book]
Marktspiegel Business-Software. 11, PLM/PDM : Anbieter, Systeme, Projekte, 2018

Riesener, Michael
Dölle, Christian
Jank, Merle-Hendrikje
Lütticke, Berthold
Müller, M.

[Journal Article]
Finite element modelling of cutting force in shearing of multidirectional carbon fibre reinforced plastic laminates
In: Journal of composite materials, 52 (28), 3865-3874, 2018
[DOI: 10.1177/0021998318771145]

Shirobokov, Anton
Klocke, Fritz
Baer, Oksana
Feuerhack, Andreas
Trauth, Daniel
et al.

[Journal Article]
Bis zu 70 % produktivere CNC-Zerspanprozesse
In: Maschinenmarkt, 124 (9), 76-80, 2018

Brecher, Christian
Wellmann, Frederik Norbert
Epple, Alexander

[Journal Article]
Modelling of ball screw drives rolling element contact characteristics
In: CIRP annals, manufacturing technology, 67 (1), 409-412, 2018
[DOI: 10.1016/j.cirp.2018.04.109]

Brecher, Christian
Eßer, Bastian
Falker, Jens
Kneer, Florian
Fey, Marcel

[Contribution to a conference proceedings]
Microstructure-based material modelling for cutting simulation of two gear steels
In: XIVth International Conference on High Speed Machining, 17. 1- 18 April 2018; San Sebastian/ Spain, 4, 2018

Abouridouane, Mustapha
Laschet, Gottfried
Kripak, Viktor
Dierdorf, Jens
Prahl, Ulrich
et al.

[Journal Article]
Analysis of the Influence of the Working Angles on the Tool Wear in Gear Hobbing
In: Gear technology, 35 (1), 56-66, 2018

Kühn, Felix
Löpenhaus, Christoph
Klocke, Fritz

[Journal Article]
Einflussfaktoren auf das Reibmoment Öl-Luft-geschmierter Spindellager
In: Tribologie und Schmierungstechnik, 65 (2), 26-30, 2018

Brecher, Christian
Bartelt, Andreas
Fey, Marcel
Hassis, Alexander
Lehner, Bernhard

[Journal Article]
Experimentelle und rechnerische Analyse von Zahnflankenermüdungsschäden konventioneller und neuartiger Zahnradwerkstoffe: Gft-Förderpreis Masterarbeit
In: Tribologie und Schmierungstechnik, 65 (1), 64-65, 2018

Goergen, Fabian

[Journal Article]
Im Zeichen von Industrie 4.0 : Erfolgreich im Werkzeugbau : Presseinformation des WBA Aachen am 02. März 2018 um 08:00 Uhr
In: Werkzeug & Formenbau, 27 (1), 56-59, 2018

Boos, Wolfgang
Salmen, Michael
Stark, Peter Maximilian
Lange, J.

[Contribution to a book, Contribution to a conference proceedings]
Process limits during uniaxial hydroforming of cold extruded cup-shaped semifinished products
In: New developments in hydroforming 2018 / published by Mathias Liewald ; IFU, Institute for Metal Forming Technology of the University of Stuttgart. - Bd.1, 325-334, 2018

Voigts, Herman Otto
Hild, Rafael
Mattfeld, Patrick-Marcel
Klocke, Fritz
Bergs, Thomas

[Journal Article]
Einfluss unterschiedlicher Schleifscheiben- und Formrollenspezifikationen auf den Schleifscheibenverschleiß
In: Diamond business, 64 (1), 40-45, 2018

Prinz, Sebastian
Trauth, Daniel
Mattfeld, Patrick-Marcel
Klocke, Fritz

[Book, Dissertation / PhD Thesis]
Modellierung der Messunsicherheit der dreidimensionalen Erfassung von Faserverbundkunststoff-Preforms, xii, 122 Seiten : Illustrationen, Diagramme, 2018

Kosse, Philipp

[Journal Article]
Deep hole drilling
In: CIRP annals, manufacturing technology, 67 (2), 673-694, 2018
[DOI: 10.1016/j.cirp.2018.05.007]

Biermann, D.
Bleicher, F.
Heisel, U.
Klocke, Fritz
Möhring, H.-C.
et al.

[Book, Proceedings]
Customization 4.0 : Proceedings of the 9th World Mass Customization & Personalization Conference (MCPC 2017), Aachen, Germany, November 20th-21st, 2017
In: 9th World Mass Customization & Personalization Conference Aachen 2017-11-20 - 2017-11-21, 702 Seiten, 2018
[DOI: 10.1007/978-3-319-77556-2]

Hankammer, Stephan
Nielsen, Kjeld
Piller, Frank Thomas
Schuh, Günther
Wang, Ning

[Contribution to a conference proceedings, Journal Article]
Optische Kohärenztomographie zur kombinierten Form- und Zentrierprüfung kleinaperturiger optischer Komponenten
In: Technisches Messen, 85 (s1), s21-s25, 2018
[DOI: 10.1515/teme-2018-0029]

Riediger, Max
Schmitt, Robert Heinrich

[Journal Article]
Ein Beitrag zur Modellierung des thermischen Umgebungseinflusses an Werkzeugmaschinen
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 113 (7/8), 448-452, 2018

Brecher, Christian
Kneer, Reinhold
Spierling, Robert
Frekers, Yona Henrik
Fey, Marcel

[Contribution to a book, Contribution to a conference proceedings]
Evaluation of Wire Electrochemical Machining With Rotating Electrode for the Manufacture of Fir Tree Slots
In: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition - 2018 : presented at the ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, June 11-15, 2018, Oslo, Norway / sponsored by the International Gas Turbine Institute. - Volume 6: Ceramics; controls, diagnostics and instrumentation; education; manufacturing materials and metallurgy, GT2018-76910, V006T24A024, 6 Seiten, 2018
[DOI: 10.1115/GT2018-76910]

Klocke, Fritz
Herrig, Tim
Klink, Andreas

[Journal Article]
Analysis of the Tribological Conditions in Grinding of Polycrystalline Diamond Based on Single Grain Friction Tests Using the Pin-Disk Principle
In: Key engineering materials : KEM, 2018 (767), 259-267, 2018
[DOI: 10.4028/www.scientific.net/KEM.767.259]

Vits, Frederik Jan
Trauth, Daniel
Mattfeld, Patrick-Marcel
Vits, Rudolf
Klocke, Fritz

[Journal Article]
Netzwerkarchitekturkomponenten auf Werkstattebene: Anforderungsgerechte Netzwerkarchitektur für das Internet of Production
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 113 (5), 342-345, 2018
[DOI: 10.3139/104.111904]

Brecher, Christian
Epple, Alexander
Knape, Simon
Schmidt, Simo Aleksis

[Contribution to a book, Journal Article]
Unintended Side Effects of the Digital Transition: European Scientists’ Messages from a Proposition-Based Expert Round Table
In: Sustainability, 10 (6), 2001, 2018
[DOI: 10.3390/su10062001]

Scholz, Roland W.
Bartelsman, Eric J.
Diefenbach, Sarah
Franke, Lude
Grunwald, Arnim
et al.

[Contribution to a book, Contribution to a conference proceedings]
System Identification of a CNC Machining Center with Support Vector Machines
In: MED 2018 : the 26th Mediterranean Conference on Control and Automation : Zadar, Croatia, June 19-22, 2018 / organization: Mediterranean Control Association, KoREMA - Croatian Society for Communications, Computing, Electronics, Measurement and Control ; technical co-sponsors: IEEE Robotics and Automation Society, IEEE Control System Society, 891-896, 2018
[DOI: 10.1109/MED.2018.8442437]

Ay, Muzaffer
Stemmler, Sebastian
Abel, Dirk
Schwenzer, Max
Klocke, Fritz

[Contribution to a book, Journal Article]
Efficient determination of stability lobe diagrams by in-process varying of spindle speed and cutting depth
In: Advances in manufacturing, 6 (3), 272-279, 2018
[DOI: 10.1007/s40436-018-0225-x]

Brecher, Christian
Chavan, Prateek Satish
Epple, Alexander

[Contribution to a conference proceedings, Journal Article]
ANP-based knowledge management solutions framework for the long-term complaint knowledge transfer
In: Total quality management & business excellence, 29 (9-10), 1074-1088, 2018
[DOI: 10.1080/14783363.2018.1486554]

Hellebrandt, Thomas
Heine, Ina
Schmitt, Robert Heinrich

[Contribution to a conference proceedings, Journal Article]
Effectivity of quality methods used on the shop floor of a serial production - how important is Poka Yoke?
In: Total quality management & business excellence, 29 (9-10), 1200-1212, 2018
[DOI: 10.1080/14783363.2018.1488559]

Pötters, Patrick
Schmitt, Robert Heinrich
Leyendecker, Bert

[Book, Dissertation / PhD Thesis]
Methode zur Ausrichtung der technologiekompetenzsasierten Diversifikation, XIV, 237 Seiten : Illustrationen, 2018

von Mangoldt, Julius

[Book, Dissertation / PhD Thesis]
Modeling fracture behavior in precision glass molding, XII, 129 Seiten : Illustrationen, Diagramme, 2018

Liu, Gang

[Contribution to a book, Contribution to a conference proceedings]
Experimental study on surface integrity of cryogenically machined Ti-6Al-4V alloy for biomedical devices
In: 4th CIRP Conference on Surface Integrity (CSI 2018) / Edited by Fengzou Fang, 181-186, 2018
[DOI: 10.1016/j.procir.2018.05.094]

Hardt, Marvin
Klocke, Fritz
Döbbeler, Benjamin
Binder, Hanns Marvin
Jawahir, I. S.

[Book, Dissertation / PhD Thesis]
Automatisierte, datenbasierte Wissensgenerierung beim Fräsen, VI, 168 Seiten : Illustrationen, Diagramme, 2018

Auerbach, Thomas

[Journal Article]
Enhancing Laser Step Diagonal Measurement by Multiple Sensors for Fast Machine Tool Calibration
In: Journal of machine engineering, 18 (2), 64-74, 2018
[DOI: 10.5604/01.3001.0012.0928]

Dahlem, Jan Philipp
Montavon, Benjamin Leendert Gerard Dominique
Peterek, Martin
Schmitt, Robert Heinrich

[Contribution to a book, Journal Article]
Multi-Criteria Assessment of Machining Processes for Turbine Disc Slotting
In: Journal of manufacturing and materials processing, 2 (2), 32, 2018
[DOI: 10.3390/jmmp2020032]

Klocke, Fritz
Bergs, Thomas
Döbbeler, Benjamin
Binder, Hanns Marvin
Seimann, Martin Albert

[Contribution to a book, Journal Article]
Multi Flank Chip Formation in Fir-Tree Broaching Inconel 718 with Cemented Carbide
In: Procedia manufacturing, 3, 503-508, 2018
[DOI: 10.1016/j.promfg.2018.07.059]

Seimann, Martin Albert
Peng, Bingxiao
Klocke, Fritz
Döbbeler, Benjamin

[Contribution to a book, Contribution to a conference proceedings]
Control of Dynamically Inherent Biological Processes in Cell Technology : Adaptive strategies for automated cell culture
In: [2018 IEEE International Conference on Engineering, Technology and Innovation, ICE/ITMC, 2018-06-17 - 2018-06-20, Stuttgart, Germany], 1-5, 2018
[DOI: 10.1109/ICE.2018.8436259]

Malik, Adam
Meyr, Ulrike
Herfs, Werner
Zenke, Martin
Wanek, Paul

[Book, Dissertation / PhD Thesis]
Entwicklung eines Modells zur Beschreibung der Bewegungsabläufe manueller Polierprozesse auf Basis der Fraktal-Theorie, XIII, 173 Seiten : Illustrationen, Diagramme, 2018

Bohne, Barbara

[Book, Dissertation / PhD Thesis]
Belastungsspezifische Werkzeug- und Prozessauslegung für die Schlichtfräsbearbeitung von Hartmetall, IX, 168 Seiten : Illustrationen, 2018

Ottersbach, Michael

[Contribution to a book, Contribution to a conference proceedings]
Peak Power Load and Energy Costs Using the Example of the Startup and Idling of a Grinding Machine
In: 25th CIRP Life Cycle Engineering (LCE) Conference, 30 April - 2 May 2018, Copenhagen, Denmark / Edited by Alexis Laurent, Alexandra Leclerc, Monia Niero, Yan Dong, Stig I. Olsen, Mikołaj Owsianiak, ..., Michael Z. Hauschild, 324-329, 2018
[DOI: 10.1016/j.procir.2017.11.044]

Voet, Henning Bernd
Garretson, Ian C.
Falk, Björn
Schmitt, Robert Heinrich
Linke, Barbara S.

[Journal Article]
Tribological studies on self-lubricating (Cr,Al)N+Mo:S coatings at elevated temperature
In: Surface and coatings technology, 353, 282-291, 2018
[DOI: 10.1016/j.surfcoat.2018.06.067]

Bobzin, Kirsten
Brögelmann, Tobias
Kruppe, Nathan Christopher
Hoffmann, Dennis Christopher
Klocke, Fritz
et al.

[Contribution to a book, Contribution to a conference proceedings]
Experimental Study on the ECM and PECM of Pressed and Casted γ-TiAl Alloys for Aero Engine Applications
In: 19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2017, Bilbao, Spain / Edited by Ana Aranzabe, Xabier Maidagan, Jose Antonio Sanchez, 768-771, 2018
[DOI: 10.1016/j.procir.2017.12.135]

Li, H. Y.
Klocke, Fritz
Zeis, Markus
Herrig, Tim
Heidemanns, Lukas

[Contribution to a book, Contribution to a conference proceedings]
Experimental Investigations of Cutting Rates and Surface Integrity in Wire Electrochemical Machining with Rotating Electrode
In: 19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2017, Bilbao, Spain / Edited by Ana Aranzabe, Xabier Maidagan, Jose Antonio Sanchez, 725-730, 2018
[DOI: 10.1016/j.procir.2017.12.145]

Klocke, Fritz
Herrig, Tim
Zeis, Markus
Klink, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Modeling and Simulation of the Microstructure Evolution of 42CrMo4 Steel During Electrochemical Machining
In: 19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2017, Bilbao, Spain / Edited by Ana Aranzabe, Xabier Maidagan, Jose Antonio Sanchez, 505-510, 2018
[DOI: 10.1016/j.procir.2017.12.082]

Klocke, Fritz
Harst, Simon Christoph
Zeis, Markus
Klink, Andreas

[Contribution to a book, Contribution to a conference proceedings]
A Novel Modeling Approach for the Simulation of Precise Electrochemical Machining (PECM) with Pulsed Current and Oscillating Cathode
In: 19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2017, Bilbao, Spain / Edited by Ana Aranzabe, Xabier Maidagan, Jose Antonio Sanchez, 499-504, 2018
[DOI: 10.1016/j.procir.2017.12.081]

Klocke, Fritz
Heidemanns, Lukas
Zeis, Markus
Klink, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Analysis of Fundamental Process Characteristics for Sinking-EDM of Cemented Carbides as a Function of Polarity
In: 19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2017, Bilbao, Spain / Edited by Ana Aranzabe, Xabier Maidagan, Jose Antonio Sanchez, 313-318, 2018
[DOI: 10.1016/j.procir.2017.12.070]

Klocke, Fritz
Chrubasik, Lothar Reiner
Klink, Andreas
Hensgen, Lars

[Contribution to a book, Contribution to a conference proceedings]
Thermographic Analysis of Spark Location Distribution in Sinking EDM
In: 19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2017, Bilbao, Spain / Edited by Ana Aranzabe, Xabier Maidagan, Jose Antonio Sanchez, 280-285, 2018
[DOI: 10.1016/j.procir.2017.12.064]

Klocke, Fritz
Schneider, Sebastian
Frauenknecht, B.
Hensgen, Lars
Klink, Andreas
et al.

[Contribution to a book, Contribution to a conference proceedings]
Investigation on the Variability of Existing Models for Simulation of Local Temperature Field during a Single Discharge for Electrical Discharge Machining (EDM)
In: 19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2017, Bilbao, Spain / Edited by Ana Aranzabe, Xabier Maidagan, Jose Antonio Sanchez, 260-265, 2018
[DOI: 10.1016/j.procir.2017.12.059]

Klocke, Fritz
Mohammadnejad, Mehnoush
Zeis, Markus
Klink, Andreas

[Contribution to a book, Contribution to a conference proceedings]
A Comparative Study of Polarity-related Effects in Single Discharge EDM of Titanium and Iron Alloys
In: 19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2017, Bilbao, Spain / Edited by Ana Aranzabe, Xabier Maidagan, Jose Antonio Sanchez, 52-57, 2018
[DOI: 10.1016/j.procir.2017.12.021]

Klocke, Fritz
Mohammadnejad, Menoush
Holsten, Maximilian Alexander
Ehle, Lisa Christine
Zeis, Markus
et al.

[Journal Article]
Model-based analysis in finish broaching of inconel 718
In: The international journal of advanced manufacturing technology, 97 (9/12), 3751-3760, 2018
[DOI: 10.1007/s00170-018-2221-5]

Seimann, Martin Albert
Peng, Bingxiao
Fischersworring-Bunk, Andreas
Rauch, Stefan
Klocke, Fritz
et al.

[Journal Article]
Anomalous influence of polarity in sink EDM of titanium alloys
In: CIRP annals, manufacturing technology, 67 (1), 221-224, 2018
[DOI: 10.1016/j.cirp.2018.04.069]

Holsten, Maximilian Alexander
Koshy, Philip
Klink, Andreas
Schwedt, Alexander

[Journal Article]
Hochiterative Planung von Fertigungstechnologien : Anforderungen an die Technologieplanung durch hochiterative Produktentwicklung
In: wt Werkstattstechnik online, 108 (6), 377-381, 2018

Rey, Jan
Grünebaum, Timm Christian
Trauth, Daniel
Mattfeld, Patrick-Marcel
Klocke, Fritz

[Contribution to a book, Contribution to a conference proceedings]
ED-machinable Ceramics with Oxide Matrix: Influence of Particle Size and Volume Fraction of the Electrical Conductive Phase on the Mechanical and Electrical Properties and the EDM Characteristics
In: 19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2017, Bilbao, Spain / Edited by Ana Aranzabe, Xabier Maidagan, Jose Antonio Sanchez, 22-27, 2018
[DOI: 10.1016/j.procir.2017.12.016]

Gommeringer, Andrea
Schmitt-Radloff, Ulrich
Ninz, Philipp
Kern, Frank
Klocke, Fritz
et al.

[Contribution to a book, Contribution to a conference proceedings]
Effects of Composition on Mechanical and ED-machining Characteristics of Zirconia toughened Alumina - Titanium Carbide (ZTA-TiC) Composite Ceramics
In: 19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2017, Bilbao, Spain / Edited by Ana Aranzabe, Xabier Maidagan, Jose Antonio Sanchez, 17-21, 2018
[DOI: 10.1016/j.procir.2017.12.015]

Schmitt-Radloff, Ulrich
Gommeringer, Andrea
Assmuth, Patrick
Kern, Frank
Klocke, Fritz
et al.

[Contribution to a book, Contribution to a conference proceedings]
Identification of Agile Mechanisms of Action As Basis for Agile Product Development
In: 28th CIRP Design Conference 2018, 23-25 May 2018, Nantes, France / Edited by Florent Laroche, Alain Bernard, 19-24, 2018
[DOI: 10.1016/j.procir.2018.02.007]

Schuh, Günther
Dölle, Christian
Kantelberg, Jan Erik
Menges, Alexander

[Contribution to a book, Contribution to a conference proceedings]
Adaptive Design of Engineering Change Management in Highly Iterative Product Development
In: 28th CIRP Design Conference 2018, 23-25 May 2018, Nantes, France / Edited by Florent Laroche, Alain Bernard, 72-77, 2018
[DOI: 10.1016/j.procir.2018.02.016]

Schuh, Günther
Prote, Jan-Philipp
Luckert, Melanie
Basse, Felix Hans-Ulrich
Thomson, V.
et al.

[Contribution to a book, Contribution to a conference proceedings]
Data-Based Determination of the Product-Oriented Complexity Degree
In: 28th CIRP Design Conference 2018, 23-25 May 2018, Nantes, France / Edited by Florent Laroche, Alain Bernard, 144-149, 2018
[DOI: 10.1016/j.procir.2018.03.293]

Schuh, Günther
Dölle, Christian
Schmitz, Stephan
Koch, Jan Felix
Höding, Marius
et al.

[Contribution to a book, Contribution to a conference proceedings]
Identification of the cost-benefit-optimal product configuration
In: 28th CIRP Design Conference 2018, 386-391, 2018
[DOI: 10.1016/j.procir.2018.03.294]

Schuh, Günther
Dölle, Christian
Koch, Jan Felix
Grutza, Pascal

[Contribution to a conference proceedings]
Company based continuing vocational training with authoring systems for tasks in industrial manual assembly
In: The Spatial Turn and Its Implications on (In)Formal Learning Contexts : International Conference, 08.-09. March 2018, Location: RUB Convention Centre at Ruhr-University Bochum / General Conference Chair: Prof. Dr. Sandra Assmann, Organiser: Katharina Wrobel, 125-131, 2018

Goppold, Marvin
Gerschner, Katharina
Molitor, Marco
Frenz, Martin

[Book]
DispoOffshore : Entwicklung eines intelligenten und effizienten Dispositionswerkzeugs für die interaktive und dynamische Aufgaben- und Ressourcensteuerung in Offshore-Windparks, 149 Seiten : Illustrationen, 2018

Optehostert, Felix
Lagemann, Frank
Kemper, Jürgen
Zapp, Thomas
Schuh, Günther
et al.

[Book, Dissertation / PhD Thesis]
Kalibrierte Kostenmodellierung von Produktallokationen in Produktionsnetzwerken unter Berücksichtigung externer Unsicherheiten, XXIII, 257 Seiten : Illustrationen, Diagramme, 2018

Schmitz, Torben

[Contribution to a book, Contribution to a conference proceedings]
Requirements Gathering and Validation for Risk-Oriented Tool Support in Supply Chains
In: Simulation and Modeling Methodologies, Technologies and Applications : International Conference, SIMULTECH 2016 Lisbon, Portugal, July 29-31, 2016, Revised Selected Papers / edited by Mohammad S. Obaidat, Tuncer Ören, Yuri Merkuryev, 120-139, 2017
[DOI: 10.1007/978-3-319-69832-8_8]

Printz, Stephan
Ponsard, Christophe
von Cube, Johann Philipp
De Landtsheer, Renaud
Ospina, Gustavo
et al.

[Journal Article]
Über den Einfluss von Werkstoffkennwerten auf das Spanbruchverhalten von bleiarmem Messing
In: Materials science and engineering technology = Materialwissenschaft und Werkstofftechnik, 49 (6), 753-768, 2018
[DOI: 10.1002/mawe.201600772]

Hofmann, U.
Nobel, Christoph
Baier, Stefan
Buchkremer, Stefan
Döbbeler, Benjamin
et al.

[Contribution to a book, Journal Article]
High-Temperature Behavior of High-Pressure Diecast Alloys Based on the Al-Si-Cu System : The Role Played by Chemical Composition / Guest Editor Prof. Dr. Maurizio Vedani
In: Metals : open access journal, 8 (5), 348, 2018
[DOI: 10.3390/met8050348]

Gariboldi, Elisabetta
Lemke, Jannis
Rovatti, Ludovica
Baer, Oksana
Timelli, Giulio
et al.

[Journal Article]
Influence of different grinding wheel and dressing roller specifications on grinding wheel wear
In: Production engineering, 12 (3/4), 441-448, 2018
[DOI: 10.1007/s11740-018-0810-7]

Prinz, Sebastian
Trauth, Daniel
Mattfeld, Patrick-Marcel
Klocke, Fritz

[Contribution to a book]
Technology-based assessment of subtractive machining processes for mold manufacture
In: 4th CIRP Conference on Surface Integrity (CSI 2018) / Edited by Fengzou Fang, 401-406, 2018
[DOI: 10.1016/j.procir.2018.05.052]

Klink, Andreas
Arntz, Kristian
Johannsen, Lars
Holsten, Maximilian Alexander
Chrubasik, Lothar Reiner
et al.

[Contribution to a book, Contribution to a conference proceedings]
Model-based process planning for milling operations using industrial robots
In: 2018 3rd International Conference on Control and Robotics Engineering : ICCRE 2018 : April 20-23, 2018, Nagoya, Japan / publisher: Institute of Electrical and Electronics Engineering, Inc., 37-44, 2018
[DOI: 10.1109/ICCRE.2018.8376430]

Lienenlüke, Lars
Gründel, Lukas
Storms, Simon
Brecher, Christian

[Contribution to a book, Journal Article]
Automatisierte Produktion biohybrider Implantate: Interpretation und Ausführung digitaler semantischer Prozessbeschreibungen auf einer Produktionsanlage
In: GIT, 62 (5), 31-33, 2018

Herfs, Werner
Flender, Jerome
Meyr, Ulrike
Wolf, Frederic
Jockenhövel, Stefan
et al.

[Contribution to a book, Contribution to a conference proceedings]
Lernende Algorithmen für Energieprognosen in der spanenden Fertigung
In: 19. Leitkongress der Mess- und Automatisierungstechnik : Seamless Convergence of Automation & IT : Automation : Baden-Baden, 03. und 04. Juli 2018 / Herausgeber: VDI Wissensforum GmbH, 329-342, 2018

Brecher, Christian
Fimmers, Christian
Hensen, Clemens
Storms, Simon

[Contribution to a book, Contribution to a conference proceedings]
Durchgängiges Model Engineering produktionsorientierter Digitaler Zwillinge: Entwurf eines Datenstruktur- und Modell-Management Ansatzes für Digitale Zwillinge auf Basis von Semantischen Webtechnologien
In: 19. Leitkongress der Mess- und Automatisierungstechnik : Seamless Convergence of Automation & IT : Automation : Baden-Baden, 03. und 04. Juli 2018 / Herausgeber: VDI Wissensforum GmbH, 183-196, 2018

Herfs, Werner
Flender, Jerome
Storms, Simon

[Journal Article]
Smart services for enhancing personal competence in industrie 4.0 digital factory
In: LogForum, 14 (1), 51-57, 2017
[DOI: 10.17270/J.LOG.2018.239]

Sun, Jianing
Gao, Minglei
Wang, Qifeng
Jiang, Minjie
Zhang, Xuan
et al.

[Contribution to a book, Contribution to a conference proceedings]
Existing Challenges and the Corresponding Approach Towards a Smart Complaint and Failure Management Process
In: 51st CIRP Conference on Manufacturing Systems / Edited by Lihui Wang, 989-994, 2018
[DOI: 10.1016/j.procir.2018.03.096]

Haghi, Sajedeh
Heinrichs, Verena
Kukulies, Jan
Schmitt, Robert Heinrich

[Book, Dissertation / PhD Thesis]
Grübchen- und Zahnflankenbruchtragfähigkeit großmoduliger Stirnräder, VII, 148 Seiten : Illustrationen, 2018

Konowalczyk, Philip

[Book, Dissertation / PhD Thesis]
Material removal mechanisms during grinding of fiber-reinforced ceramics with porous matrix, XII, 169 Seiten : Illustrationen, 2018

Müller, Sebastian

[Abstract, Contribution to a conference proceedings, Journal Article]
Adaptation Of The Autostem Robotic Platform For Gmp-compliant Manufacture Of Bone Marrow-derived Mesenchymal Stromal Cells
In: Cytotherapy, 20 (5, Supplement), 127, 2018
[DOI: 10.1016/j.jcyt.2018.02.125]

Murphy, M.
Ochs, J.
Schmitt, Robert Heinrich
Barry, F.