[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Investigations on five-axis milling and subsequent five-axis grinding of gears
In: Procedia CIRP, 107, 705-711, 2022
[DOI: 10.1016/j.procir.2022.05.049]

Bergs, Thomas
Schneider, Sebastian A. M.
Janßen, Christopher Maria
Jahnel, K.
Ganser, Philip
et al.

[Beitrag zu einem Tagungsband]
Explainable AI for error detection in composites : knowledge discovery in artificial neural networks
In: SAMPE EUROPE Conference and Exhibition 2021, Baden, Switzerland, 28-30 September 2021, 2022

Brillowski, Florian Sascha (Corresponding author)
Becker, Marco
Vermeulen, Markus
Trauth, Daniel
Bergs, Thomas
et al.

[Fachzeitschriftenartikel]
Microstructure impact on the machining of two gear steels. Part 1: Derivation of effective flow curves
In: Materials science and engineering / A, 845, 143125, 2022
[DOI: 10.1016/j.msea.2022.143125]

Laschet, Gottfried
Abouridouane, M.
Fernández, M.
Budnitzki, M.
Bergs, Thomas

[Buch, Doktorarbeit]
Simulation of the dynamic vibration behaviour and spindle speed optimization during the milling process of turbomachinery components
In: Ergebnisse aus der Produktionstechnik 24/2022, 2022

Maslo, Semir

[Poster]
Flying Fuel Cells and the challenges for bipolar plate forming
In: Aachen Hydrogen Colloquium 2022 Aachen 2022-05-03 - 2022-05-04, 2022

Horstkotte, Rainer
Gierlings, Sascha
Herrig, Tim
Bergs, Thomas

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Preparation of Papers for IFAC Conferences & Symposia : Adaptive fixture system for reducing machining distortion caused by residual stresses in milling
In: IFAC-PapersOnLine, 55 (2), 264-269, 2022
[DOI: 10.1016/j.ifacol.2022.04.204]

Landwehr, Markus
Kalocsay, R. (Corresponding author)
Kolvenbach, Christian
Ganser, Philipp
Bergs, Thomas

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Analysis of tool wear in face hobbing plunging manufacturing processes
In: Procedia CIRP, 107, 1174-1179, 2022

Alexopoulos, Charalampos (Corresponding author)
Brimmers, Jens
Bergs, Thomas

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Analysis of tool wear in face hobbing plunging manufacturing processes
In: Procedia CIRP, 107, 1174-1179, 2022
[DOI: 10.1016/j.procir.2022.05.127]

Alexopoulos, Charalampos (Corresponding author)
Brimmers, Jens
Bergs, Thomas

[Buch, Tagungsband]
Aachen Forum on Gear Production: Gear Finishing Technology and Quality Inspection 9th - 10th November 2021, 2022

Bergs, Thomas (Editor)
Brecher, Christian (Editor)

[Buch, Doktorarbeit]
Werkzeugseitiger Einsatz von NiTi-FGL zur Verbesserung der dynamischen Prozessstabilität bei der Fräsbearbeitung
In: Ergebnisse aus der Produktionstechnik Band 16/2022, 2022

Schäfer, Alexander

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Deep learning and rule-based image processing pipeline for automated metal cutting tool wear detection and measurement
In: IFAC-PapersOnLine, 55 (2), 534-539, 2022
[DOI: 10.1016/j.ifacol.2022.04.249]

Holst, Carsten (Corresponding author)
Yavuz, Taha Berk
Gupta, Pranjul
Ganser, Philipp
Bergs, Thomas

[Fachzeitschriftenartikel]
Analysis of the thermo-mechanical load and productivity during force-compliant grinding of pcBN
In: Journal of materials processing technology, 305, 117604, 2022
[DOI: 10.1016/j.jmatprotec.2022.117604]

Müller, Ulrich Hermann (Corresponding author)
Prinz, Sebastian
Barth, Sebastian
Bergs, Thomas

[Buch, Doktorarbeit]
Methodik zur Integration pulverbettbasierter additiver Fertigungstechnologien in Fertigungsprozessketten
In: Ergebnisse aus der Produktionstechnik 20, 2022

Wollbrink, Moritz

[Fachzeitschriftenartikel]
Low-Temperature Physical Vapor Deposition TiAlCrSiN Coated High-Speed Steel : Comparison Between Shot-Peened and Polished Substrate Condition
In: Advanced engineering materials, 2200099, 2022
[DOI: 10.1002/adem.202200099]

Bobzin, Kirsten
Kalscheuer, Christian
Carlet, Marco
Hoffmann, Dennis Christopher (Corresponding author)
Bergs, Thomas
et al.

[Buch, Doktorarbeit]
Closing the loop of model predictive force control in milling with ensemble Kalman filtering
In: Ergebnisse aus der Produktionstechnik 13/2022, 2022
[DOI: 10.18154/RWTH-2022-03843]

Schwenzer, Max

[Buch, Doktorarbeit]
Methodik zur Gestaltung von Technologieketten und Prozessfolgen nach lebensphasenübergreifend ökologisch-ökonomischen Kriterien
In: Ergebnisse aus der Produktionstechnik 5/2022, 2022

Grünebaum, Timm Christian

[Buch, Bericht]
Wälzfräsen im Schrupp- und Schlichtschnitt zum Weichverzahnen mit höchsten Oberflächengüten - Fertigwälzfräsen II : Schlussbericht vom 03.01.2022 : Berichtszeitraum: 01.01.2019-30.06.2021
In: IGF-Vorhaben 20391, 2022

Troß, Nico (Corresponding author)
Brimmers, Jens
Bergs, Thomas

[Fachzeitschriftenartikel]
Model predictive force control in milling based on an ensemble KALMAN filter
In: Journal of intelligent manufacturing, 2022
[DOI: 10.1007/s10845-022-01931-2]

Schwenzer, Max
Stemmler, Sebastian
Ay, Muzaffer
Rüppel, Adrian K. (Corresponding author)
Bergs, Thomas
et al.

[Buch, Doktorarbeit]
Modeling the material behavior under metal cutting conditions
In: Ergebnisse aus der Produktionstechnik 7/2022, 2022

Hardt, Marvin Yannick

[Fachzeitschriftenartikel]
Influence of the Tool Wear on the Quality and Service Life of Gears for the Geared Turbofan Technology Machined by Five-Axis Milling
In: Journal of engineering for gas turbines and power, 144 (6), 061005, 2022
[DOI: 10.1115/1.4053911]

Zachert, Christoph (Corresponding author)
Lakner, Thomas
Greschert, René
Schraknepper, Daniel
Bergs, Thomas

[Buchbeitrag, Fachzeitschriftenartikel]
Inline Optical Coherence Tomography for Multidirectional Process Monitoring in a Coaxial LMD-w Process
In: Applied Sciences, 12 (5), 2701, 2022
[DOI: 10.3390/app12052701]

Stehmar, Charlotte (Corresponding author)
Gipperich, Marius
Kogel-Hollacher, Markus
Velazquez Iturbide, Alfredo
Schmitt, Robert H.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Process stabilization through pulsed laser-induced melt pool shaping in dual-beam LMD
In: Laser 3D Manufacturing IX : [Proceedings] - SPIE, 2022. - ISBN 97815106485559781510648562 - doi:10.1117/12.2606192, 10 Seiten, 2022
[DOI: 10.1117/12.2606192]

Gipperich, Marius
Gräfe, Stefan
Day, Robin
Bergs, Thomas

[Buchbeitrag, Fachzeitschriftenartikel]
Asymptotic Posterior Normality of Multivariate Latent Traits in an IRT Model
In: Psychometrika : a journal of quantitative psychology, 27 Seiten, 2022
[DOI: 10.1007/s11336-021-09838-2]

Kornely, Mia Johanna
Kateri, Maria (Corresponding author)

[Fachzeitschriftenartikel]
Effect of Friction Modelling on Damage Prediction in Deep Drawing Simulations of Rotationally Symmetric Cups
In: Defect and diffusion forum : DDF, 414, 103-109, 2022
[DOI: 10.4028/p-29o20d]

Nick, Matthias (Corresponding author)
Müller, Martina (Corresponding author)
Voigts, Herman Otto (Corresponding author)
Weiser, Ingo Felix (Corresponding author)
Herrig, Tim (Corresponding author)
et al.

[Fachzeitschriftenartikel]
Perspectives on data-driven models and its potentials in metal forming and blanking technologies
In: Production engineering, 19 Seiten, 2022
[DOI: 10.1007/s11740-022-01115-0]

Liewald, Mathias (Corresponding author)
Bergs, Thomas
Groche, Peter
Behrens, Bernd-Arno
Briesenick, David
et al.

[Fachzeitschriftenartikel]
Methodology for the integrative adaption of manufacturing process and inspection sequences to component changes of safety-critical medical products
In: Production engineering, 2022
[DOI: 10.1007/s11740-022-01114-1]

Stauder, Lars Niklas (Corresponding author)
Knott, Anna-Lena
Schmitt, Robert H.
Bergs, Thomas

[Buchbeitrag, Beitrag zu einem Tagungsband]
Investigation of Combined Flat Coining and Fine Blanking of 16MnCr5 to Influence the Die Roll Formation
In: Production at the leading edge of technology : proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021 / Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, editors, 112-121, 2021
[DOI: 10.1007/978-3-030-78424-9_13]

Schweinshaupt, Frank Oliver (Corresponding author)
Weiser, Ingo Felix
Herrig, Tim
Bergs, Thomas

[Buchbeitrag]
Feinschneidbarkeit von Mangan-Bor-Stahl
In: Tagungsband zum 16. Erlanger Workshop Warmblechumformung 2021, 2022

Weiser, Ingo Felix
Herrig, Tim
Bergs, Thomas

[Buch, Doktorarbeit]
Cost-efficient design of adaptations for manufacturing process sequences of safety-critical components
In: Ergebnisse aus der Produktionstechnik 2/2022, 2022

Hermann, Lennard W.

[Fachzeitschriftenartikel]
Understanding Kinematics of the Orthogonal Cutting Using Digital Image Correlation : Measurement and Analysis
In: Journal of manufacturing science and engineering, 144 (3), 031008, 2021
[DOI: 10.1115/1.4051917]

Zhang, Dong (Corresponding author)
Meurer, Markus Joachim (Corresponding author)
Zhang, Xiao-Ming (Corresponding author)
Bergs, Thomas (Corresponding author)
Ding, Han (Corresponding author)

[Konferenzbeitrag]
Hochleistungswerkstoffe aus der Luft- und Raumfahrt : Schleifverhalten von faserverstärkten Nichtoxidkeramiken
In: Schleiftagung 2022 online 2022-01-26 - 2022-01-27, 2022

Prinz, Sebastian

[Buchbeitrag, Beitrag zu einem Tagungsband]
Design and Evaluation of a Function-Oriented Tooth Flank Roughness
In: Aachen Forum on Gear Production: Gear Finishing Technology and Quality Inspection 9th - 10th November 2021 / Thomas Bergs, Christian Brecher (eds.), 177-192, 2022

Lang, Martin (Corresponding author)
Bergs, Thomas
Brimmers, Jens

[Buchbeitrag, Beitrag zu einem Tagungsband]
Potentials and Challenges of Profile Gear Grinding with Vitrified Bonded cBN
In: Aachen Forum on Gear Production: Gear Finishing Technology and Quality Inspection 9th - 10th November 2021 / Thomas Bergs, Christian Brecher (eds.), 31-47, 2022

Schalley, Babette (Corresponding author)
Bergs, Thomas
Brimmers, Jens
Solf, Mareike

[Fachzeitschriftenartikel]
Electrochemical Defect Analysis of Additive Manufactured Components
In: Journal of engineering for gas turbines and power, 144 (1), 011001, 2022
[DOI: 10.1115/1.4052199]

Sous, Florian (Corresponding author)
Herrig, Tim (Corresponding author)
Bergs, Thomas (Corresponding author)
Karges, Florian (Corresponding author)
Feiling, Nicole (Corresponding author)
et al.

[Fachzeitschriftenartikel]
Effect of electrode material on removal efficiency regarding single discharges in wire EDM
In: The international journal of advanced manufacturing technology, 120 (3/4), 1583-1589, 2021
[DOI: 10.1007/s00170-021-07858-x]

Welschof, Lukas Gabriel (Corresponding author)
Schäfer, Niklas Cedric
Herrig, Tim
Klink, Andreas
Bergs, Thomas

[Fachzeitschriftenartikel]
Express Wire Coil Cladding as an Advanced Technology to Accelerate Additive Manufacturing and Coating
In: Journal of engineering for gas turbines and power, 144 (2), 021003, 2021
[DOI: 10.1115/1.4052089]

Gipperich, Marius (Corresponding author)
Riepe, Jan
Day, Robin (Corresponding author)
Bergs, Thomas (Corresponding author)

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Investigation of the diameter error when turning thin walled workpieces
In: Procedia CIRP, 102, 343-348, 2021

Bergs, Thomas
Knappe, Dominik (Corresponding author)
Husseini, K.
Pullen, T.
Schraknepper, Daniel
et al.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Advanced calculation of the stress distribution in milling tools during cutting under consideration of residual stresses and tool wear
In: Procedia CIRP, 102, 19-24, 2021

Schraknepper, Daniel (Corresponding author)
Peng, Bingxiao
Bergs, Thomas

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Methodology for integrated additive-subtractive process chain generation204
In: Procedia CIRP, 100, 199-204, 2021

Wollbrink, Moritz (Corresponding author)
Dannen, Tammo
Arntz, Kristian
Prümmer, Marcel
Bergs, Thomas

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Tool wear progression of SiAlON ceramic end mills in five-axis high-feed rough machining of an Inconel 718 BLISK
In: Procedia CIRP, 101, 13-16, 2021

Zimmermann, Richard (Corresponding author)
Welling, David
Venek, Tommy
Ganser, Philipp
Bergs, Thomas

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Investigation of cutting mechanisms in the machining of Ceramic Matrix Composites (CMCs)
In: Procedia CIRP, 101, 330-333, 2021

Bergs, Thomas
Ganser, Philipp
Fruh, D.
Reisberg, Jannik (Corresponding author)

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Time- and Cost-Efficient Specification and Evaluation of Manufacturing Changes through Iterative Information Acquisition
In: Procedia CIRP, 104, 176-181, 2021

Hermann, L. (Corresponding author)
Weber, A.
Beckers, Alexander
Barth, Sebastian
Bergs, Thomas

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Development of a voxelization tool for the calculation of vector-based workpiece representations
In: Procedia CIRP, 100, 7-12, 2021

Bergs, Thomas
Henrichs, Oliver (Corresponding author)
Wilms, Marcel
Prümmer, Marcel
Arntz, Kristian

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
CFD simulation to optimize the internal coolant channels of an additively manufactured milling tool
In: Procedia CIRP, 102, 234-239, 2021
[DOI: 10.1016/j.procir.2021.09.040]

Zachert, Christoph (Corresponding author)
Liu, Hui
Lakner, Thomas
Schraknepper, Daniel
Bergs, Thomas

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Investigation of the diameter error when turning thin walled workpieces
In: Procedia CIRP, 102, 343-348, 2021
[DOI: 10.1016/j.procir.2021.09.059]

Bergs, Thomas
Knappe, Dominik (Corresponding author)
Husseini, K.
Pullen, T.
Schraknepper, Daniel
et al.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Advanced calculation of the stress distribution in milling tools during cutting under consideration of residual stresses and tool wear
In: Procedia CIRP, 102, 19-24, 2021
[DOI: 10.1016/j.procir.2021.09.004]

Schraknepper, Daniel (Corresponding author)
Peng, Bingxiao
Bergs, Thomas

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Tool wear progression of SiAlON ceramic end mills in five-axis high-feed rough machining of an Inconel 718 BLISK
In: Procedia CIRP, 101, 13-16, 2021
[DOI: 10.1016/j.procir.2021.02.003]

Zimmermann, Richard (Corresponding author)
Welling, David
Venek, Tommy
Ganser, Philipp
Bergs, Thomas

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Methodology for integrated additive-subtractive process chain generation
In: Procedia CIRP, 100, 199-204, 2021
[DOI: 10.1016/j.procir.2021.05.055]

Wollbrink, Moritz (Corresponding author)
Dannen, Tammo
Arntz, Kristian
Prümmer, Marcel
Bergs, Thomas

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Investigation of cutting mechanisms in the machining of Ceramic Matrix Composites (CMCs)
In: Procedia CIRP, 101, 330-333, 2021
[DOI: 10.1016/j.procir.2020.11.015]

Bergs, Thomas
Ganser, Philipp
Fruh, D.
Reisberg, Jannik (Corresponding author)

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Development of a voxelization tool for the calculation of vector-based workpiece representations
In: Procedia CIRP, 100, 7-12, 2021
[DOI: 10.1016/j.procir.2021.05.022]

Bergs, Thomas
Henrichs, Oliver (Corresponding author)
Wilms, Marcel
Prümmer, Marcel
Arntz, Kristian